diff --git a/rtdata/languages/English (UK) b/rtdata/languages/English (UK) index bb6a81288..5eee56244 100644 --- a/rtdata/languages/English (UK) +++ b/rtdata/languages/English (UK) @@ -5,7 +5,6 @@ FILEBROWSER_POPUPCOLORLABEL;Colour label FILEBROWSER_SHOWUNCOLORHINT;Show images without Colour label.\nShortcut: Alt-` HISTORY_MSG_39;Colour Temperature HISTORY_MSG_46;Colour Denoising -HISTORY_MSG_49;Edge Sensitive Colour Denoising HISTORY_MSG_69;Working Colour Space HISTORY_MSG_70;Output Colour Space HISTORY_MSG_71;Input Colour Space @@ -15,6 +14,9 @@ HISTORY_MSG_155;Vibrance - Avoid colour shift HISTORY_MSG_191;CAM02 - Colourfulness (M) HISTORY_MSG_197;CAM02 - Colour curve HISTORY_MSG_198;CAM02 - Colour curve +HISTORY_MSG_221;B&W Colour Filter +HISTORY_MSG_240;Gradient - Centre +HISTORY_MSG_245;Vignetting - Centre ICMPANEL_FILEDLGFILTERICM;Colour profiles ICMPANEL_GAMMABEFOREINPUT;Colour Profile Applies Gamma ICMPANEL_INPUTDLGLABEL;Select Input Colour Profile... @@ -48,6 +50,12 @@ PREFERENCES_SELECTICCDIRDLG;Select Colour Profile Directory... PREFERENCES_SELECTMONITORPROFDLG;Select Colour Profile of the Display... PREFERENCES_TAB_COLORMGR;Colour Management TOOLBAR_TOOLTIP_STRAIGHTEN;Straighten / fine rotation.\nShortcut: s\n\nIndicate the vertical or horizontal by drawing a guide line over the image preview. Angle of rotation will be shown next to the guide line. Centre of rotation is the geometrical centre of the image. +TP_BWMIX_CC_ENABLED;Adjust complementary colour +TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colours in ROYGCBPM mode +TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Tone curve, just before B&W conversion\nMay take into account the colour components +TP_BWMIX_FILTER;Colour Filter +TP_BWMIX_FILTER_TOOLTIP;The colour filter simulate shots taken with a coloured filter placed in front of the lens. Coloured filters reduce transmission of specific range of colours and correspondingly affect their lightness. E.g. a Red filter darkens Blue skies. +TP_BWMIX_RGB_TOOLTIP;Mix the RGB channels. Use Presets for guidance.\nPay attention to negative values that may cause artifacts or erratic behaviour. TP_COLORAPP_ALGO_QM;Brightness + Colourfulness (QM) TP_COLORAPP_BADPIXSL_TOOLTIP;Suppression of hot/bad (brightly coloured) pixels.\n 0=no effect 1=median 2=gaussian.\n\nThese artifacts are due to limitations of CIECAM02. Alternatively, adjust the image to avoid very dark shadows. TP_COLORAPP_CHROMA_M;Colourfulnes (M) @@ -60,6 +68,11 @@ TP_COLORAPP_SURROUND_TOOLTIP;Change tones and colours to take into account the v TP_COLORAPP_TCMODE_COLORF;Colourfulness TP_DIRPYRDENOISE_ENABLED_TOOLTIP;Can be used on raw and non-raw images.\n\nFor non-raw images noise reduction of luminance depends on gamma of the input colour profile. Gamma of sRGB is assumed, thus if input image is in colour profile of a different gamma, luminance noise reduction will vary. TP_EPD_TOOLTIP;Tone mapping is possible via Lab mode (standard) and CIECAM02 mode.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colourfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)" +TP_GRADIENT_CENTER;Centre +TP_GRADIENT_CENTER_X;Centre X +TP_GRADIENT_CENTER_X_TOOLTIP;Rotation anchor point X: -100=left edge, 0=centre, +100=right edge +TP_GRADIENT_CENTER_Y;Centre Y +TP_GRADIENT_CENTER_Y_TOOLTIP;Rotation anchor point Y: -100=top edge, 0=centre, +100=bottom edge TP_HLREC_COLOR;Colour Propagation TP_ICM_FILEDLGFILTERICM;Colour profiles TP_ICM_INPUTCAMERAICC;Auto-matched camera-specific colour profile @@ -71,6 +84,7 @@ TP_ICM_INPUTNONE_TOOLTIP;Use no input colour profile at all. Use only in special TP_ICM_LABEL;Colour Management TP_LABCURVE_AVOIDCOLORSHIFT;Avoid colour shift TP_LABCURVE_AVOIDCOLORSHIFT_TOOLTIP;Fit colours into gamut of the working colour space and apply Munsell correction +TP_PCVIGNETTE_FEATHER_TOOLTIP;Feathering: 0=corners only, 50=halfway to centre, 100=to centre TP_PFCURVE_CURVEEDITOR_CH_TOOLTIP;Controls defringe strength by colour. Higher = more, lower = less. TP_RAW_FALSECOLOR;False Colour Suppression Steps TP_RGBCURVES_LUMAMODE_TOOLTIP;Luminosity Mode allows to vary the contribution of R, G and B channels to the Luminosity of the image, without altering image colour. @@ -78,7 +92,7 @@ TP_VIBRANCE_AVOIDCOLORSHIFT;Avoid colour shift TP_VIGNETTING_CENTER;Centre TP_VIGNETTING_CENTER_X;Centre X TP_VIGNETTING_CENTER_Y;Centre Y - +TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behaviour of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater)\nb) are far from conditions where calibrations were performed\nc) where the matrices or ICC profiles are unsuitable !!!!!!!!!!!!!!!!!!!!!!!!! ! Untranslated keys follow; remove the ! prefix after an entry is translated. !!!!!!!!!!!!!!!!!!!!!!!!! @@ -315,17 +329,25 @@ TP_VIGNETTING_CENTER_Y;Centre Y !HISTORY_DELSNAPSHOT;Del !HISTORY_FROMCLIPBOARD;From Clipboard !HISTORY_LABEL;History +!HISTORY_MSG_1;Photo Loaded !HISTORY_MSG_2;PP3 Loaded +!HISTORY_MSG_3;PP3 Changed +!HISTORY_MSG_4;History Browsing !HISTORY_MSG_5;Lightness +!HISTORY_MSG_6;Contrast +!HISTORY_MSG_7;Black !HISTORY_MSG_8;Exposure Compensation !HISTORY_MSG_9;Highlight Compression !HISTORY_MSG_10;Shadow Compression +!HISTORY_MSG_11;Tone Curve 1 !HISTORY_MSG_12;Auto Exposure !HISTORY_MSG_13;Exposure Clipping !HISTORY_MSG_14;Luminance Lightness +!HISTORY_MSG_15;Luminance Contrast !HISTORY_MSG_16;Luminance Black !HISTORY_MSG_17;Luminance Highlight Compr. !HISTORY_MSG_18;Luminance Shadow Compr. +!HISTORY_MSG_19;'L' Curve !HISTORY_MSG_20;Sharpening !HISTORY_MSG_21;Sharpening Radius !HISTORY_MSG_22;Sharpening Amount @@ -353,6 +375,7 @@ TP_VIGNETTING_CENTER_Y;Centre Y !HISTORY_MSG_45;Lum. Denoising Edge Tolerance !HISTORY_MSG_47;Blend ICC highlights with matrix !HISTORY_MSG_48;Use DCP's tone curve +!HISTORY_MSG_49;DCP Illuminant !HISTORY_MSG_50;Shadow/Highlight !HISTORY_MSG_51;Highlights !HISTORY_MSG_52;Shadows @@ -514,7 +537,6 @@ TP_VIGNETTING_CENTER_Y;Centre Y !HISTORY_MSG_218;B&W Red Gamma !HISTORY_MSG_219;B&W Green Gamma !HISTORY_MSG_220;B&W Blue Gamma -!HISTORY_MSG_221;B&W Color Filter !HISTORY_MSG_222;B&W Presets !HISTORY_MSG_223;B&W Channel Mixer Orange !HISTORY_MSG_224;B&W Channel Mixer Yellow @@ -533,12 +555,10 @@ TP_VIGNETTING_CENTER_Y;Centre Y !HISTORY_MSG_237;B&W Mixer !HISTORY_MSG_238;Gradient - Feather !HISTORY_MSG_239;Gradient - Strength -!HISTORY_MSG_240;Gradient - Center !HISTORY_MSG_241;Vignette Filter - Feather !HISTORY_MSG_242;Vignette Filter - Roundness !HISTORY_MSG_243;Vignetting - Rayon !HISTORY_MSG_244;Vignetting - Strength -!HISTORY_MSG_245;Vignetting - Center !HISTORY_MSG_246;'CL' curve !HISTORY_MSG_247;'LH' curve !HISTORY_MSG_248;'HH' curve @@ -998,16 +1018,12 @@ TP_VIGNETTING_CENTER_Y;Centre Y !TP_BWMIX_AUTOCH;Auto !TP_BWMIX_AUTOCH_TIP;Calculate values optimizing channel-mixer !TP_BWMIX_BLUE;Blue -!TP_BWMIX_CC_ENABLED;Adjust complementary color -!TP_BWMIX_CC_TOOLTIP;Enable to allow automatic adjustment of complementary colors in ROYGCBPM mode !TP_BWMIX_CHANNEL;Luminance Equalizer !TP_BWMIX_CURVEEDITOR1;'Before' curve !TP_BWMIX_CURVEEDITOR2;'After' curve !TP_BWMIX_CURVEEDITOR_AFTER_TOOLTIP;Tone curve, after B&W conversion, at the end of treatment -!TP_BWMIX_CURVEEDITOR_BEFORE_TOOLTIP;Tone curve, just before B&W conversion\nMay take into account the color components !TP_BWMIX_CURVEEDITOR_LH_TOOLTIP;Modify luminance in function of hue\nPay attention to extreme values that may cause artifacts !TP_BWMIX_CYAN;Cyan -!TP_BWMIX_FILTER;Color Filter !TP_BWMIX_FILTER_BLUEGREEN;Blue-Green !TP_BWMIX_FILTER_BLUE;Blue !TP_BWMIX_FILTER_GREENYELLOW;Green-Yellow @@ -1016,7 +1032,6 @@ TP_VIGNETTING_CENTER_Y;Centre Y !TP_BWMIX_FILTER_PURPLE;Purple !TP_BWMIX_FILTER_REDYELLOW;Red-Yellow !TP_BWMIX_FILTER_RED;Red -!TP_BWMIX_FILTER_TOOLTIP;The color filter simulate shots taken with a colored filter placed in front of the lens. Colored filters reduce transmission of specific range of colors and correspondingly affect their lightness. E.g. a Red filter darkens Blue skies. !TP_BWMIX_FILTER_YELLOW;Yellow !TP_BWMIX_GAMMA;Gamma Correction !TP_BWMIX_GAM_BLUE;Blue Channel @@ -1039,7 +1054,6 @@ TP_VIGNETTING_CENTER_Y;Centre Y !TP_BWMIX_RED;Red !TP_BWMIX_RGBLABEL;R: %1%% G: %2%% B: %3%% Total: %4%% !TP_BWMIX_RGBLABEL_HINT;Final RGB factors that take care of all of the mixer options\nTotal displays the sum of RGB values ​​actually applied:\n- always 100% in relative mode\n- higher (lighter) or lower (darker) than 100% in absolute mode. -!TP_BWMIX_RGB_TOOLTIP;Mix the RGB channels. Use Presets for guidance.\nPay attention to negative values that may cause artifacts or erratic behavior. !TP_BWMIX_SETTING;Presets !TP_BWMIX_SETTING_TOOLTIP;Different presets (films, landscape, ...) or manual settings of channel-mixer !TP_BWMIX_SET_HIGHCONTAST;High contrast @@ -1080,12 +1094,15 @@ TP_VIGNETTING_CENTER_Y;Centre Y !TP_COLORAPP_ADAPTVIEWING;Adaptation viewing luminosity (cd/m²) !TP_COLORAPP_ADAPTVIEWING_TOOLTIP;Absolute luminance of the viewing environnement\n(usually 16cd/m²) !TP_COLORAPP_ADAP_AUTO_TOOLTIP;If the checkbox is checked (recommended) RT calculates an optimum value from Exif data.\nTo set the value manually, uncheck the checkbox first +!TP_COLORAPP_ALGO;Algorithm !TP_COLORAPP_ALGO_ALL;All !TP_COLORAPP_ALGO_JC;Lightness + Chroma (JC) !TP_COLORAPP_ALGO_JS;Lightness + Saturation (JS) !TP_COLORAPP_ALGO_TOOLTIP;Lets you choose between parameter subsets or all parameters +!TP_COLORAPP_BADPIXSL;Hot/bad pixel filter !TP_COLORAPP_BRIGHT;Brightness (Q) !TP_COLORAPP_BRIGHT_TOOLTIP;Brightness in CIECAM02 takes into account the white's luminosity and differs from Lab and RGB brightness +!TP_COLORAPP_CHROMA;Chroma (C) !TP_COLORAPP_CHROMA_S;Saturation (S) !TP_COLORAPP_CHROMA_S_TOOLTIP;Saturation in CIECAM02 differs from Lab and RGB saturation !TP_COLORAPP_CHROMA_TOOLTIP;Chroma in CIECAM02 differs from Lab and RGB chroma @@ -1112,10 +1129,12 @@ TP_VIGNETTING_CENTER_Y;Centre Y !TP_COLORAPP_LABEL_VIEWING;Viewing Conditions !TP_COLORAPP_LIGHT;Lightness (J) !TP_COLORAPP_LIGHT_TOOLTIP;Lightness in CIECAM02 differs from Lab and RGB lightness +!TP_COLORAPP_MODEL;White-Point Model !TP_COLORAPP_RSTPRO;Red & skin tones protection !TP_COLORAPP_RSTPRO_TOOLTIP;Red and skin tones protection (sliders and curves) !TP_COLORAPP_SHARPCIE;Sharpening, Contrast by Detail Levels, Microcontrast & Defringe with Q/C !TP_COLORAPP_SHARPCIE_TOOLTIP;Sharpening, Contrast by Detail Levels, Microcontrast & Defringe will use CIECAM02 if enabled. +!TP_COLORAPP_SURROUND;Surround !TP_COLORAPP_SURROUND_AVER;Average !TP_COLORAPP_SURROUND_DARK;Dark !TP_COLORAPP_SURROUND_DIM;Dim @@ -1224,11 +1243,6 @@ TP_VIGNETTING_CENTER_Y;Centre Y !TP_GAMMA_OUTPUT;Output Gamma !TP_GAMMA_SLOP;Slope (linear) !TP_GENERAL_11SCALE_TOOLTIP;The effect of this tool or some of its sub-component is only visible at 1:1 preview scale. -!TP_GRADIENT_CENTER;Center -!TP_GRADIENT_CENTER_X;Center X -!TP_GRADIENT_CENTER_X_TOOLTIP;Rotation anchor point X: -100=left edge, 0=center, +100=right edge -!TP_GRADIENT_CENTER_Y;Center Y -!TP_GRADIENT_CENTER_Y_TOOLTIP;Rotation anchor point Y: -100=top edge, 0=center, +100=bottom edge !TP_GRADIENT_DEGREE;Angle !TP_GRADIENT_DEGREE_TOOLTIP;Rotation angle in degrees !TP_GRADIENT_FEATHER;Feather @@ -1254,7 +1268,11 @@ TP_VIGNETTING_CENTER_Y;Centre Y !TP_ICM_DCPILLUMINANT_INTERPOLATED;Interpolated !TP_ICM_DCPILLUMINANT_TOOLTIP;Select which embedded DCP illuminant to employ. Default is "interpolated" which is a mix between the two based on white balance. The setting is only enabled if a Dual-Illuminant DCP with interpolation support is selected. !TP_ICM_FILEDLGFILTERANY;Any files +!TP_ICM_INPUTCAMERA;Camera standard +!TP_ICM_INPUTCUSTOM;Custom !TP_ICM_INPUTDLGLABEL;Select Input DCP/ICC Profile... +!TP_ICM_INPUTEMBEDDED;Use embedded, if possible +!TP_ICM_INPUTNONE;No profile !TP_ICM_INPUTPROFILE;Input Profile !TP_ICM_NOICM;No ICM: sRGB Output !TP_ICM_OUTPUTDLGLABEL;Select Output ICC Profile... @@ -1314,7 +1332,6 @@ TP_VIGNETTING_CENTER_Y;Centre Y !TP_NEUTRAL;Neutral !TP_NEUTRAL_TIP;Reset exposure sliders to neutral values.\nApplies to the same controls that Auto Levels applies to, regardless of whether you used Auto Levels or not !TP_PCVIGNETTE_FEATHER;Feather -!TP_PCVIGNETTE_FEATHER_TOOLTIP;Feathering: 0=corners only, 50=halfway to center, 100=to center !TP_PCVIGNETTE_LABEL;Vignette Filter !TP_PCVIGNETTE_ROUNDNESS;Roundness !TP_PCVIGNETTE_ROUNDNESS_TOOLTIP;Roundness: 0=rectangle, 50=fitted ellipse, 100=circle @@ -1323,6 +1340,7 @@ TP_VIGNETTING_CENTER_Y;Centre Y !TP_PERSPECTIVE_HORIZONTAL;Horizontal !TP_PERSPECTIVE_LABEL;Perspective !TP_PERSPECTIVE_VERTICAL;Vertical +!TP_PFCURVE_CURVEEDITOR_CH;Hue !TP_PREPROCESS_GREENEQUIL;Green Equilibration !TP_PREPROCESS_HOTDEADPIXFILT;Hot/Dead pixel filter !TP_PREPROCESS_HOTDEADPIXFILT_TOOLTIP;Try to suppress hot and dead pixels @@ -1373,6 +1391,7 @@ TP_VIGNETTING_CENTER_Y;Centre Y !TP_RGBCURVES_CHANNEL;Channel !TP_RGBCURVES_GREEN;G !TP_RGBCURVES_LABEL;RGB Curves +!TP_RGBCURVES_LUMAMODE;Luminosity Mode !TP_RGBCURVES_RED;R !TP_ROTATE_DEGREE;Degree !TP_ROTATE_LABEL;Rotate @@ -1434,7 +1453,6 @@ TP_VIGNETTING_CENTER_Y;Centre Y !TP_WBALANCE_CUSTOM;Custom !TP_WBALANCE_DAYLIGHT;Daylight (sunny) !TP_WBALANCE_EQBLUERED;Blue/Red Equalizer -!TP_WBALANCE_EQBLUERED_TOOLTIP;Allows to deviate from the normal behavior of "white balance" by modulating the blue/red balance.\nThis can be useful when shooting conditions:\na) are far from the standard illuminant (e.g. underwater)\nb) are far from conditions where calibrations were performed\nc) where the matrices or ICC profiles are unsuitable !TP_WBALANCE_FLASH55;Leica !TP_WBALANCE_FLASH60;Standard, Canon, Pentax, Olympus !TP_WBALANCE_FLASH65;Nikon, Panasonic, Sony, Minolta diff --git a/rtdata/languages/Polish (Latin Characters) b/rtdata/languages/Polish (Latin Characters) index 71c5b9845..7dd6e9ef5 100644 --- a/rtdata/languages/Polish (Latin Characters) +++ b/rtdata/languages/Polish (Latin Characters) @@ -1,19 +1,11 @@ -#00 Polish -#01 24.12.2007 -#02 Mateusz Ludwin -#03 ----------------------------- -#04 08.01.2010 -#05 Initial update for 3.0 release -#06 Bartosz "Simek" Kaszubowski -#07 ----------------------------- -#08 06.09.2011 -#09 Dariusz 'Salvadhor' Duma -#10 The race for the bleeding edge - update for 4.x -#11 2011-11-30 DrSlony -#12 2012-01-14 DrSlony -#13 2012-01-30 DrSlony -#13 2012-04-02 DrSlony -#14 2013-05-21 DrSlony +#01 2007-12-24 Mateusz Ludwin +#02 2010-01-08 Initial update for 3.0 release by Bartosz "Simek" Kaszubowski +#03 2011-09-06 Dariusz 'Salvadhor' Duma +#04 2011-11-30 DrSlony +#05 2012-01-14 DrSlony +#06 2012-01-30 DrSlony +#07 2012-04-02 DrSlony +#08 2013-05-21 DrSlony ABOUT_TAB_BUILD;Wersja ABOUT_TAB_CREDITS;Zaslugi diff --git a/rtdata/languages/README b/rtdata/languages/README index e99f2657d..bffdb994b 100644 --- a/rtdata/languages/README +++ b/rtdata/languages/README @@ -56,7 +56,7 @@ the characters in the language file you want to convert into Latin-only: To convert all line terminators in all language files to CRLF (dos/mac/unix) you can use vim: - a) cd ~/rawtherapee/rtdata/languages + a) cd rtdata/languages vim b) In vim, type: :set ffs=dos