Merge branch 'dev' into spot-removal-tool

rtdata/languages/default

@@ -225,6 +225,7 @@ GENERAL_DISABLED;Disabled
 GENERAL_ENABLE;Enable
 GENERAL_ENABLED;Enabled
 GENERAL_FILE;File
+GENERAL_HELP;Help
 GENERAL_LANDSCAPE;Landscape
 GENERAL_NA;n/a
 GENERAL_NO;No
@@ -566,10 +567,10 @@ HISTORY_MSG_314;W - Gamut - Reduce artifacts
 HISTORY_MSG_315;W - Residual - Contrast
 HISTORY_MSG_316;W - Gamut - Skin tar/prot
 HISTORY_MSG_317;W - Gamut - Skin hue
-HISTORY_MSG_318;W - Contrast - Highlight levels
-HISTORY_MSG_319;W - Contrast - Highlight range
-HISTORY_MSG_320;W - Contrast - Shadow range
-HISTORY_MSG_321;W - Contrast - Shadow levels
+HISTORY_MSG_318;W - Contrast - Fine levels
+HISTORY_MSG_319;W - Contrast - Fine range
+HISTORY_MSG_320;W - Contrast - Coarse range
+HISTORY_MSG_321;W - Contrast - Coarse levels
 HISTORY_MSG_322;W - Gamut - Avoid color shift
 HISTORY_MSG_323;W - ES - Local contrast
 HISTORY_MSG_324;W - Chroma - Pastel
@@ -727,6 +728,7 @@ HISTORY_MSG_491;White Balance
 HISTORY_MSG_492;RGB Curves
 HISTORY_MSG_493;L*a*b* Adjustments
 HISTORY_MSG_494;Capture Sharpening
+HISTORY_MSG_CAT02PRESET;Cat02 automatic preset
 HISTORY_MSG_CLAMPOOG;Clip out-of-gamut colors
 HISTORY_MSG_COLORTONING_LABGRID_VALUE;CT - Color correction
 HISTORY_MSG_COLORTONING_LABREGION_AB;CT - Color correction
@@ -750,6 +752,7 @@ HISTORY_MSG_DEHAZE_STRENGTH;Dehaze - Strength
 HISTORY_MSG_DUALDEMOSAIC_AUTO_CONTRAST;Dual demosaic - Auto threshold
 HISTORY_MSG_DUALDEMOSAIC_CONTRAST;Dual demosaic - Contrast threshold
 HISTORY_MSG_FILMNEGATIVE_ENABLED;Film Negative
+HISTORY_MSG_FILMNEGATIVE_FILMBASE;Film base color
 HISTORY_MSG_FILMNEGATIVE_VALUES;Film negative values
 HISTORY_MSG_HISTMATCHING;Auto-matched tone curve
 HISTORY_MSG_ICM_OUTPUT_PRIMARIES;Output - Primaries
@@ -758,6 +761,7 @@ HISTORY_MSG_ICM_OUTPUT_TYPE;Output - Type
 HISTORY_MSG_ICM_WORKING_GAMMA;Working - Gamma
 HISTORY_MSG_ICM_WORKING_SLOPE;Working - Slope
 HISTORY_MSG_ICM_WORKING_TRC_METHOD;Working - TRC method
+HISTORY_MSG_ILLUM;Illuminant
 HISTORY_MSG_LOCALCONTRAST_AMOUNT;Local Contrast - Amount
 HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
 HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
@@ -775,6 +779,7 @@ HISTORY_MSG_PDSHARPEN_RADIUS_BOOST;CS - Corner radius boost
 HISTORY_MSG_PIXELSHIFT_DEMOSAIC;PS - Demosaic method for motion
 HISTORY_MSG_PREPROCESS_LINEDENOISE_DIRECTION;Line noise filter direction
 HISTORY_MSG_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
+HISTORY_MSG_PREPROCWB_MODE;Preprocess WB Mode
 HISTORY_MSG_PRSHARPEN_CONTRAST;PRS - Contrast threshold
 HISTORY_MSG_RAWCACORR_AUTOIT;Raw CA Correction - Iterations
 HISTORY_MSG_RAWCACORR_COLORSHIFT;Raw CA Correction - Avoid color shift
@@ -787,7 +792,40 @@ HISTORY_MSG_SOFTLIGHT_ENABLED;Soft light
 HISTORY_MSG_SOFTLIGHT_STRENGTH;Soft light - Strength
 HISTORY_MSG_SPOT;Spot removal
 HISTORY_MSG_SPOT_ENTRY;Spot removal - Point modif.
+HISTORY_MSG_TEMPOUT;CAM02 automatic temperature
 HISTORY_MSG_TM_FATTAL_ANCHOR;DRC - Anchor
+HISTORY_MSG_TRANS_Method;Geometry - Method
+HISTORY_MSG_WAVBALCHROM;Equalizer chrominance
+HISTORY_MSG_WAVBALLUM;Equalizer luminance
+HISTORY_MSG_WAVCHROMFI;Chroma fine
+HISTORY_MSG_WAVCHROMCO;Chroma coarse
+HISTORY_MSG_WAVCLARI;Clarity
+HISTORY_MSG_WAVEDGS;Edge stopping
+HISTORY_MSG_WAVMERGEC;Merge C
+HISTORY_MSG_WAVMERGEL;Merge L
+HISTORY_MSG_WAVRADIUS;Radius Shadows-Highlight
+HISTORY_MSG_WAVSCALE;Scale
+HISTORY_MSG_WAVSHOWMASK;Show wavelet mask
+HISTORY_MSG_WAVSIGMA;Damper
+HISTORY_MSG_WAVSOFTRAD;Soft radius clarity
+HISTORY_MSG_WAVSOFTRADEND;Soft radius final
+HISTORY_MSG_WAVUSHAMET;Clarity method
+HISTORY_MSG_THRESWAV;Balance threshold
+HISTORY_MSG_BLUWAV;Damper
+HISTORY_MSG_WAVOLDSH;Old algorithm
+HISTORY_MSG_WAVOFFSET;Offset
+HISTORY_MSG_WAVLOWTHR;Threshold low contrast
+HISTORY_MSG_BLSHAPE;Blur by level
+HISTORY_MSG_WAVBL;Blur levels
+HISTORY_MSG_BLURWAV;Blur luminance
+HISTORY_MSG_BLURCWAV;Blur chroma
+HISTORY_MSG_EDGEFFECT;Edge Damper
+HISTORY_MSG_SIGMAFIN;Final contrast Damper
+HISTORY_MSG_SIGMATON;Toning Damper
+HISTORY_MSG_SIGMACOL;Chroma Damper
+HISTORY_MSG_SIGMADIR;Dir Damper
+HISTORY_MSG_RANGEAB;Range ab
+HISTORY_MSG_PROTAB;Protection
 HISTORY_NEWSNAPSHOT;Add
 HISTORY_NEWSNAPSHOT_TOOLTIP;Shortcut: <b>Alt-s</b>
 HISTORY_SNAPSHOT;Snapshot
@@ -1020,6 +1058,7 @@ PARTIALPASTE_PREPROCESS_GREENEQUIL;Green equilibration
 PARTIALPASTE_PREPROCESS_HOTPIXFILT;Hot pixel filter
 PARTIALPASTE_PREPROCESS_LINEDENOISE;Line noise filter
 PARTIALPASTE_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
+PARTIALPASTE_PREPROCWB;Preprocess White Balance
 PARTIALPASTE_PRSHARPENING;Post-resize sharpening
 PARTIALPASTE_RAWCACORR_AUTO;CA auto-correction
 PARTIALPASTE_RAWCACORR_AVOIDCOLORSHIFT;CA avoid color shift
@@ -1426,6 +1465,16 @@ TP_COLORAPP_GAMUT;Gamut control (L*a*b*)
 TP_COLORAPP_GAMUT_TOOLTIP;Allow gamut control in L*a*b* mode.
 TP_COLORAPP_HUE;Hue (h)
 TP_COLORAPP_HUE_TOOLTIP;Hue (h) - angle between 0° and 360°.
+TP_COLORAPP_ILLUM;Illuminant
+TP_COLORAPP_ILLUM_TOOLTIP;Select the illuminant closest to the shooting conditions.\nIn general D50, but it can change depending on the time and lattitude.
+TP_COLORAPP_ILA;Incandescent StdA 2856K
+TP_COLORAPP_IL41;D41
+TP_COLORAPP_IL50;D50
+TP_COLORAPP_IL55;D55
+TP_COLORAPP_IL60;D60
+TP_COLORAPP_IL65;D65
+TP_COLORAPP_IL75;D75
+TP_COLORAPP_ILFREE;Free
 TP_COLORAPP_LABEL;CIE Color Appearance Model 2002
 TP_COLORAPP_LABEL_CAM02;Image Adjustments
 TP_COLORAPP_LABEL_SCENE;Scene Conditions
@@ -1437,6 +1486,8 @@ TP_COLORAPP_MODEL;WP Model
 TP_COLORAPP_MODEL_TOOLTIP;White-Point Model.\n\n<b>WB [RT] + [output]</b>: RT's white balance is used for the scene, CIECAM02 is set to D50, and the output device's white balance is set in Viewing Conditions.\n\n<b>WB [RT+CAT02] + [output]</b>: RT's white balance settings are used by CAT02 and the output device's white balance is set in Viewing Conditions.\n\n<b>Free temp+green + CAT02 + [output]:</b> temp and green are selected by the user, the output device's white balance is set in Viewing Conditions.
 TP_COLORAPP_NEUTRAL;Reset
 TP_COLORAPP_NEUTRAL_TIP;Reset all sliders checkbox and curves to their default values
+TP_COLORAPP_PRESETCAT02;Preset cat02 automatic
+TP_COLORAPP_PRESETCAT02_TIP;Set combobox, sliders, temp, green so that Cat02 automatic is preset.\nYou can change illuminant shooting conditions.\nYou must change Cat02 adaptation Viewing conditions if need.\nYou can change Temperature and Tint Viewing conditions if need, and other settings if need. 
 TP_COLORAPP_RSTPRO;Red & skin-tones protection
 TP_COLORAPP_RSTPRO_TOOLTIP;Red &amp; skin-tones protection affects both sliders and curves.
 TP_COLORAPP_SURROUND;Surround
@@ -1453,7 +1504,9 @@ TP_COLORAPP_TCMODE_LABEL2;Curve mode 2
 TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode
 TP_COLORAPP_TCMODE_LIGHTNESS;Lightness
 TP_COLORAPP_TCMODE_SATUR;Saturation
-TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD50 temp=5003\nD55 temp=5503\nD65 temp=6504\nD75 temp=7504
+TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD41 temp=4100\nD50 temp=5003\nD55 temp=5503\nD60 temp=6000\nD65 temp=6504\nD75 temp=7504
+TP_COLORAPP_TEMP2_TOOLTIP;Either symmetrical mode temp = White balance.\nEither select illuminant always set Tint=1.\n\nA temp=2856\nD41 temp=4100\nD50 temp=5003\nD55 temp=5503\nD60 temp=6000\nD65 temp=6504\nD75 temp=7504
+TP_COLORAPP_TEMPOUT_TOOLTIP;Disable to chnage temperature and tint
 TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
 TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
 TP_COLORAPP_VIEWING_ABSOLUTELUMINANCE_TOOLTIP;Absolute luminance of the viewing environment\n(usually 16 cd/m²).
@@ -1652,6 +1705,9 @@ TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard
 TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
 TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
 TP_FILMNEGATIVE_BLUE;Blue ratio
+TP_FILMNEGATIVE_FILMBASE_PICK;Pick film base color
+TP_FILMNEGATIVE_FILMBASE_TOOLTIP;Pick a spot of unexposed film (eg. the border between frames), to get the actual film base color values, and save them in the processing profile.\nThis makes it easy to get a more consistent color balance when batch-processing multiple pictures from the same roll.\nAlso use this when the converted image is extremely dark, bright, or color-unbalanced.
+TP_FILMNEGATIVE_FILMBASE_VALUES;Film base RGB:
 TP_FILMNEGATIVE_GREEN;Reference exponent (contrast)
 TP_FILMNEGATIVE_GUESS_TOOLTIP;Automatically set the red and blue ratios by picking two patches which had a neutral hue (no color) in the original scene. The patches should differ in brightness. Set the white balance afterwards.
 TP_FILMNEGATIVE_LABEL;Film Negative
@@ -1777,6 +1833,8 @@ TP_LABCURVE_RSTPRO_TOOLTIP;Works on the Chromaticity slider and the CC curve.
 TP_LENSGEOM_AUTOCROP;Auto-Crop
 TP_LENSGEOM_FILL;Auto-fill
 TP_LENSGEOM_LABEL;Lens / Geometry
+TP_LENSGEOM_LIN;Linear
+TP_LENSGEOM_LOG;Logarithmic
 TP_LENSPROFILE_CORRECTION_AUTOMATCH;Automatically selected
 TP_LENSPROFILE_CORRECTION_LCPFILE;LCP file
 TP_LENSPROFILE_CORRECTION_MANUAL;Manually selected
@@ -1825,6 +1883,10 @@ TP_PREPROCESS_LINEDENOISE_DIRECTION_PDAF_LINES;Horizontal only on PDAF rows
 TP_PREPROCESS_LINEDENOISE_DIRECTION_VERTICAL;Vertical
 TP_PREPROCESS_NO_FOUND;None found
 TP_PREPROCESS_PDAFLINESFILTER;PDAF lines filter
+TP_PREPROCWB_LABEL;Preprocess White Balance
+TP_PREPROCWB_MODE;Mode
+TP_PREPROCWB_MODE_AUTO;Auto
+TP_PREPROCWB_MODE_CAMERA;Camera
 TP_PRSHARPENING_LABEL;Post-Resize Sharpening
 TP_PRSHARPENING_TOOLTIP;Sharpens the image after resizing. Only works when the "Lanczos" resizing method is used. It is impossible to preview the effects of this tool. See RawPedia for usage instructions.
 TP_RAWCACORR_AUTO;Auto-correction
@@ -2105,11 +2167,16 @@ TP_WAVELET_BACKGROUND;Background
 TP_WAVELET_BACUR;Curve
 TP_WAVELET_BALANCE;Contrast balance d/v-h
 TP_WAVELET_BALANCE_TOOLTIP;Alters the balance between the wavelet directions: vertical-horizontal and diagonal.\nIf contrast, chroma or residual tone mapping are activated, the effect due to balance is amplified.
-TP_WAVELET_BALCHRO;Chroma balance
+TP_WAVELET_BALCHRO;Chrominance balance
 TP_WAVELET_BALCHRO_TOOLTIP;If enabled, the 'Contrast balance' curve or slider also modifies chroma balance.
+TP_WAVELET_BALCHROM;Denoise Equalizer  Blue-Red
+TP_WAVELET_BALLUM;Denoise Equalizer  White-Black
 TP_WAVELET_BANONE;None
 TP_WAVELET_BASLI;Slider
 TP_WAVELET_BATYPE;Contrast balance method
+TP_WAVELET_BLCURVE;Blur by levels
+TP_WAVELET_BLURFRAME;Blur
+TP_WAVELET_BLUWAV;Damper
 TP_WAVELET_CBENAB;Toning and Color Balance
 TP_WAVELET_CB_TOOLTIP;For strong values product color-toning by combining it or not with levels decomposition 'toning'\nFor low values you can change the white balance of the background (sky, ...) without changing that of the front plane, generally more contrasted
 TP_WAVELET_CCURVE;Local contrast
@@ -2119,22 +2186,32 @@ TP_WAVELET_CH3;Link contrast levels
 TP_WAVELET_CHCU;Curve
 TP_WAVELET_CHR;Chroma-contrast link strength
 TP_WAVELET_CHRO;Saturated/pastel threshold
+TP_WAVELET_CHROFRAME;Denoise Chrominance
+TP_WAVELET_CHROMAFRAME;Chroma
+TP_WAVELET_CHROMCO;Chrominance Coarse
+TP_WAVELET_CHROMFI;Chrominance Fine
 TP_WAVELET_CHRO_TOOLTIP;Sets the wavelet level which will be the threshold between saturated and pastel colors.\n1-x: saturated\nx-9: pastel\n\nIf the value exceeds the amount of wavelet levels you are using then it will be ignored.
 TP_WAVELET_CHR_TOOLTIP;Adjusts chroma as a function of "contrast levels" and "chroma-contrast link strength"
+TP_WAVELET_CHRWAV;Blur chroma
 TP_WAVELET_CHSL;Sliders
 TP_WAVELET_CHTYPE;Chrominance method
+TP_WAVELET_CLA;Clarity
+TP_WAVELET_CLARI;Sharp-mask and Clarity
 TP_WAVELET_COLORT;Opacity Red-Green
 TP_WAVELET_COMPCONT;Contrast
 TP_WAVELET_COMPGAMMA;Compression gamma
 TP_WAVELET_COMPGAMMA_TOOLTIP;Adjusting the gamma of the residual image allows you to equilibrate the data and histogram.
 TP_WAVELET_COMPTM;Tone mapping
 TP_WAVELET_CONTEDIT;'After' contrast curve
+TP_WAVELET_CONTFRAME;Contrast - Compression
 TP_WAVELET_CONTR;Gamut
 TP_WAVELET_CONTRA;Contrast
+TP_WAVELET_CONTRASTEDIT;Finer - Coarser levels
 TP_WAVELET_CONTRAST_MINUS;Contrast -
 TP_WAVELET_CONTRAST_PLUS;Contrast +
 TP_WAVELET_CONTRA_TOOLTIP;Changes contrast of the residual image.
 TP_WAVELET_CTYPE;Chrominance control
+TP_WAVELET_CURVEEDITOR_BL_TOOLTIP;Disabled if zoom > about 300%
 TP_WAVELET_CURVEEDITOR_CC_TOOLTIP;Modifies local contrast as a function of the original local contrast (abscissa).\nLow abscissa values represent small local contrast (real values about 10..20).\n50% abscissa represents average local contrast (real value about 100..300).\n66% abscissa represents standard deviation of local contrast (real value about 300..800).\n100% abscissa represents maximum local contrast (real value about 3000..8000).
 TP_WAVELET_CURVEEDITOR_CH;Contrast levels=f(Hue)
 TP_WAVELET_CURVEEDITOR_CH_TOOLTIP;Modifies each level's contrast as a function of hue.\nTake care not to overwrite changes made with the Gamut sub-tool's hue controls.\nThe curve will only have an effect when wavelet contrast level sliders are non-zero.
@@ -2150,6 +2227,7 @@ TP_WAVELET_DAUB6;D6 - standard plus
 TP_WAVELET_DAUB10;D10 - medium
 TP_WAVELET_DAUB14;D14 - high
 TP_WAVELET_DAUB_TOOLTIP;Changes Daubechies coefficients:\nD4 = Standard,\nD14 = Often best performance, 10% more time-intensive.\n\nAffects edge detection as well as the general quality of the firsts levels. However the quality is not strictly related to this coefficient and can vary with images and uses.
+TP_WAVELET_DIRFRAME;Directional contrast
 TP_WAVELET_DONE;Vertical
 TP_WAVELET_DTHR;Diagonal
 TP_WAVELET_DTWO;Horizontal
@@ -2163,6 +2241,8 @@ TP_WAVELET_EDGEDETECTTHR;Threshold low (noise)
 TP_WAVELET_EDGEDETECTTHR2;Threshold high (detection)
 TP_WAVELET_EDGEDETECTTHR_TOOLTIP;This adjuster lets you target edge detection for example to avoid applying edge sharpness to fine details, such as noise in the sky.
 TP_WAVELET_EDGEDETECT_TOOLTIP;Moving the slider to the right increases edge sensitivity. This affects local contrast, edge settings and noise.
+TP_WAVELET_EDEFFECT;Damper
+TP_WAVELET_EDEFFECT_TOOLTIP;This slider controls how wide the range of contrast values are that receive the maximum effect from the tool.\nMaximum value (2.5) disabled the tool
 TP_WAVELET_EDGESENSI;Edge sensitivity
 TP_WAVELET_EDGREINF_TOOLTIP;Reinforce or reduce the action of the first level, do the opposite to the second level, and leave the rest unchanged.
 TP_WAVELET_EDGTHRESH;Detail
@@ -2173,10 +2253,12 @@ TP_WAVELET_EDSL;Threshold Sliders
 TP_WAVELET_EDTYPE;Local contrast method
 TP_WAVELET_EDVAL;Strength
 TP_WAVELET_FINAL;Final Touchup
+TP_WAVELET_FINCFRAME;Final Local Contrast
 TP_WAVELET_FINEST;Finest
-TP_WAVELET_HIGHLIGHT;Highlight luminance range
+TP_WAVELET_HIGHLIGHT;Finer levels luminance range
+TP_WAVELET_FINCOAR_TOOLTIP;The left (positive) part of the curve acts on the finer levels (increase).\nThe 2 points on the abscissa represent the respective action limits of finer and coarser levels 5 and 6 (default).\nThe right (negative) part of the curve acts on the coarser levels (increase).\nAvoid moving the left part of the curve with negative values. Avoid moving the right part of the curve with positives values
 TP_WAVELET_HS1;Whole luminance range
-TP_WAVELET_HS2;Shadows/Highlights
+TP_WAVELET_HS2;Selective luminance range
 TP_WAVELET_HUESKIN;Skin hue
 TP_WAVELET_HUESKIN_TOOLTIP;The bottom points set the beginning of the transition zone, and the upper points the end of it, where the effect is at its maximum.\n\nIf you need to move the area significantly, or if there are artifacts, then the <b>white balance is incorrect</b>.
 TP_WAVELET_HUESKY;Sky hue
@@ -2186,10 +2268,10 @@ TP_WAVELET_ITER_TOOLTIP;Left: increase low levels and reduce high levels,\nRight
 TP_WAVELET_LABEL;Wavelet Levels
 TP_WAVELET_LARGEST;Coarsest
 TP_WAVELET_LEVCH;Chroma
-TP_WAVELET_LEVDIR_ALL;All levels in all directions
-TP_WAVELET_LEVDIR_INF;Below or equal the level
+TP_WAVELET_LEVDIR_ALL;All levels, in all directions
+TP_WAVELET_LEVDIR_INF;Finer details levels, with selected level
 TP_WAVELET_LEVDIR_ONE;One level
-TP_WAVELET_LEVDIR_SUP;Above the level
+TP_WAVELET_LEVDIR_SUP;Coarser details levels, without selected level
 TP_WAVELET_LEVELS;Wavelet levels
 TP_WAVELET_LEVELS_TOOLTIP;Choose the number of detail levels the image is to be decomposed into. More levels require more RAM and require a longer processing time.
 TP_WAVELET_LEVF;Contrast
@@ -2200,57 +2282,91 @@ TP_WAVELET_LEVTWO;Level 3
 TP_WAVELET_LEVZERO;Level 1
 TP_WAVELET_LINKEDG;Link with Edge Sharpness' Strength
 TP_WAVELET_LIPST;Enhanced algoritm
-TP_WAVELET_LOWLIGHT;Shadow luminance range
+TP_WAVELET_LOWLIGHT;Coarser levels luminance range
+TP_WAVELET_LOWTHR_TOOLTIP;Prevents amplification of fine textures and noise
 TP_WAVELET_MEDGREINF;First level
 TP_WAVELET_MEDI;Reduce artifacts in blue sky
 TP_WAVELET_MEDILEV;Edge detection
 TP_WAVELET_MEDILEV_TOOLTIP;When you enable Edge Detection, it is recommanded:\n- to disabled low contrast levels to avoid artifacts,\n- to use high values of gradient sensitivity.\n\nYou can modulate the strength with 'refine' from Denoise and Refine.
+TP_WAVELET_MERGEC;Merge Chroma
+TP_WAVELET_MERGEL;Merge Luma
 TP_WAVELET_NEUTRAL;Neutral
 TP_WAVELET_NOIS;Denoise
 TP_WAVELET_NOISE;Denoise and Refine
+TP_WAVELET_NOISE_TOOLTIP;If level 4 luminance denoise superior to 20, mode Agressive is used.\nIf chrominance coarse superior to 20, mode Agressive is used.
 TP_WAVELET_NPHIGH;High
 TP_WAVELET_NPLOW;Low
 TP_WAVELET_NPNONE;None
 TP_WAVELET_NPTYPE;Neighboring pixels
 TP_WAVELET_NPTYPE_TOOLTIP;This algorithm uses the proximity of a pixel and eight of its neighbors. If less difference, edges are reinforced.
+TP_WAVELET_OLDSH;Algorithm using negatives values
 TP_WAVELET_OPACITY;Opacity Blue-Yellow
 TP_WAVELET_OPACITYW;Contrast balance d/v-h curve
-TP_WAVELET_OPACITYWL;Final local contrast
+TP_WAVELET_OPACITYWL;Local contrast
 TP_WAVELET_OPACITYWL_TOOLTIP;Modify the final local contrast at the end of the wavelet treatment.\n\nThe left side represents the smallest local contrast, progressing to the largest local contrast on the right.
 TP_WAVELET_PASTEL;Pastel chroma
 TP_WAVELET_PROC;Process
+TP_WAVELET_PROTAB;Protection
+TP_WAVELET_RADIUS;Radius Shadows - Highlight
+TP_WAVELET_RANGEAB;Range a and b %
 TP_WAVELET_RE1;Reinforced
 TP_WAVELET_RE2;Unchanged
 TP_WAVELET_RE3;Reduced
-TP_WAVELET_RESCHRO;Chroma
+TP_WAVELET_RESBLUR;Blur Luminance
+TP_WAVELET_RESBLURC;Blur Chroma
+TP_WAVELET_RESBLUR_TOOLTIP;Disabled if zoom > about 500%
+TP_WAVELET_RESCHRO;Intensity
 TP_WAVELET_RESCON;Shadows
 TP_WAVELET_RESCONH;Highlights
 TP_WAVELET_RESID;Residual Image
 TP_WAVELET_SAT;Saturated chroma
 TP_WAVELET_SETTINGS;Wavelet Settings
+TP_WAVELET_SHA;Sharp mask
+TP_WAVELET_SHFRAME;Shadows/Highlights
+TP_WAVELET_SHOWMASK;Show wavelet 'mask'
+TP_WAVELET_SIGMA;Damper
+TP_WAVELET_SIGMAFIN;Damper
+TP_WAVELET_SIGMA_TOOLTIP;The effect of the contrast sliders is stronger in medium contrast details, and weaker in high and low contrast details.\n With this slider you can control how quickly the effect dampens towards the extreme contrasts.\n The higher the slider is set, the wider the range of contrasts which will get a strong change, and the higher the risk to generate artifacts.\n The lower it is, the more pinpoint will the effect be applied to a narrow range of contrast values.
 TP_WAVELET_SKIN;Skin targetting/protection
 TP_WAVELET_SKIN_TOOLTIP;At -100 skin-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 skin-tones are protected while all other tones are affected.
 TP_WAVELET_SKY;Sky targetting/protection
 TP_WAVELET_SKY_TOOLTIP;At -100 sky-tones are targetted.\nAt 0 all tones are treated equally.\nAt +100 sky-tones are protected while all other tones are affected.
+TP_WAVELET_SOFTRAD;Soft Radius
 TP_WAVELET_STREN;Strength
 TP_WAVELET_STRENGTH;Strength
 TP_WAVELET_SUPE;Extra
 TP_WAVELET_THR;Shadows threshold
-TP_WAVELET_THRESHOLD;Highlight levels
-TP_WAVELET_THRESHOLD2;Shadow levels
-TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value).
-TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels.
+TP_WAVELET_THRESHOLD;Finer levels
+TP_WAVELET_THRESHOLD2;Coarser levels
+TP_WAVELET_THRESHOLD_TOOLTIP;Only levels beyond the chosen value will be affected by the highlight luminance range. Other levels will be fully treated. The chosen value here limits the highest possible value of the shadow levels. : All levels from level 1 up to the chosen value will only be affected within the Finer levels luminance range.\nAll other levels will have the whole range of luminances affected, unless the Coarser levels setting limits it.\nThe chosen value in this slider becomes the minimum possible value of the Coarser levels.
+TP_WAVELET_THRESHOLD2_TOOLTIP;Only levels between 9 and 9 minus the value will be affected by the shadow luminance range. Other levels will be fully treated. The highest level possible is limited by the highlight level value (9 minus highlight level value). : Only levels between the chosen value and level 9/Extra will be affected by the Coarser levels luminance range.\nAll other levels will have the whole range of luminances affected, unless the Finer levels setting limits it.\nThe lower level possible that will be considered by the algorithm is limited by the Finer levels value.
+TP_WAVELET_THRESWAV;Balance Threshold
 TP_WAVELET_THRH;Highlights threshold
-TP_WAVELET_TILESBIG;Big tiles
+TP_WAVELET_TILESBIG;Tiles
 TP_WAVELET_TILESFULL;Full image
 TP_WAVELET_TILESIZE;Tiling method
 TP_WAVELET_TILESLIT;Little tiles
 TP_WAVELET_TILES_TOOLTIP;Processing the full image leads to better quality and is the recommended option, while using tiles is a fall-back solution for users with little RAM. Refer to RawPedia for memory requirements.
+TP_WAVELET_BL;Blur levels
+TP_WAVELET_TMEDGS;Edge stopping
+TP_WAVELET_TMSCALE;Scale
 TP_WAVELET_TMSTRENGTH;Compression strength
-TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image. When the value is different from 0, the Strength and Gamma sliders of the Tone Mapping tool in the Exposure tab will become grayed out.
-TP_WAVELET_TMTYPE;Compression method
+TP_WAVELET_TMSTRENGTH_TOOLTIP;Control the strength of tone mapping or contrast compression of the residual image.
+TP_WAVELET_TMEDGS;Edge stopping
 TP_WAVELET_TON;Toning
+TP_WAVELET_TONFRAME;Excluded Colors
+TP_WAVELET_TMTYPE;Compression method
+TP_WAVELET_USH;None
+TP_WAVELET_USHARP;Clarity method
+TP_WAVELET_USHARP_TOOLTIP;Origin : the source file is the file before Wavelet.\nWavelet : the source file is the file including wavelet threatment
+TP_WAVELET_USH_TOOLTIP;If you select Sharp-mask, wavelet settings will be automatically positioned :\nBackground=black, Process=below, level=3...you can change level between 1 and 4.\n\nIf you select Clarity, wavelet settings will be automatically positioned :\nBackground=residual, Process=above, level=7..you can change level between 5 and 10 and wavelet levels.
+TP_WAVELET_WAVLOWTHR;Low contrast threshold
+TP_WAVELET_WAVOFFSET;Offset
+TP_WAVELET_OFFSET_TOOLTIP;Offset modifies the balance between shadows and highlights.\nHigh values here will amplify the contrast change of the highlights, whereas low values will amplify the contrast change of the shadows.\nAlong with a low Damper value you will able to select the contrasts that will be enhanced.
 TP_WBALANCE_AUTO;Auto
+TP_WBALANCE_AUTOITCGREEN;Temperature correlation
+TP_WBALANCE_AUTOOLD;RGB grey
+TP_WBALANCE_AUTO_HEADER;Automatic
 TP_WBALANCE_CAMERA;Camera
 TP_WBALANCE_CLOUDY;Cloudy
 TP_WBALANCE_CUSTOM;Custom
@@ -2292,6 +2408,8 @@ TP_WBALANCE_SOLUX41;Solux 4100K
 TP_WBALANCE_SOLUX47;Solux 4700K (vendor)
 TP_WBALANCE_SOLUX47_NG;Solux 4700K (Nat. Gallery)
 TP_WBALANCE_SPOTWB;Use the pipette to pick the white balance from a neutral patch in the preview.
+TP_WBALANCE_STUDLABEL;Correlation factor: %1
+TP_WBALANCE_STUDLABEL_TOOLTIP;Display calculated Student correlation.\nLower values are better, where <0.005 is excellent,\n<0.01 is good, and >0.5 is poor.\nLow values do not mean that the white balance is good:\nif the illuminant is non-standard the results can be erratic.\nA value of 1000 means previous calculations are used and\nthe resultsare probably good.
 TP_WBALANCE_TEMPBIAS;AWB temperature bias
 TP_WBALANCE_TEMPBIAS_TOOLTIP;Allows to alter the computation of the "auto white balance"\nby biasing it towards warmer or cooler temperatures. The bias\nis expressed as a percentage of the computed temperature,\nso that the result is given by "computedTemp + computedTemp * bias".
 TP_WBALANCE_TEMPERATURE;Temperature