From f59122e05a05d528941b4b253ab71b7d5420cd09 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?D=C3=A1niel=20Batty=C3=A1nyi?= <86350313+LoKolbasz@users.noreply.github.com> Date: Fri, 21 Jul 2023 13:43:15 +0200 Subject: [PATCH] Removed irrelevant changes from 'rtdata/languages/default' --- rtdata/languages/default | 33 ++++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-) diff --git a/rtdata/languages/default b/rtdata/languages/default index 73a0ae1cc..6788f52e3 100644 --- a/rtdata/languages/default +++ b/rtdata/languages/default @@ -138,6 +138,7 @@ FILEBROWSER_PARTIALPASTEPROFILE;Paste - partial FILEBROWSER_PASTEPROFILE;Paste FILEBROWSER_POPUPCANCELJOB;Cancel job FILEBROWSER_POPUPCOLORLABEL;Color label +FILEBROWSER_POPUPCOLORLABEL0;Label: None FILEBROWSER_POPUPCOLORLABEL1;Label: Red FILEBROWSER_POPUPCOLORLABEL2;Label: Yellow FILEBROWSER_POPUPCOLORLABEL3;Label: Green @@ -155,6 +156,7 @@ FILEBROWSER_POPUPPROCESS;Put to queue FILEBROWSER_POPUPPROCESSFAST;Put to queue (Fast export) FILEBROWSER_POPUPPROFILEOPERATIONS;Processing profile operations FILEBROWSER_POPUPRANK;Rank +FILEBROWSER_POPUPRANK0;Unrank FILEBROWSER_POPUPRANK1;Rank 1 * FILEBROWSER_POPUPRANK2;Rank 2 ** FILEBROWSER_POPUPRANK3;Rank 3 *** @@ -1441,8 +1443,8 @@ HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius -HISTORY_MSG_LOCALLAB_TE_PIVOT;Local - Equalizer pivot HISTORY_MSG_LOCAL_GAMUTMUNSEL;Local - Gamut-Munsell +HISTORY_MSG_LOCALLAB_TE_PIVOT;Local - Equalizer pivot HISTORY_MSG_METADATA_MODE;Metadata copy mode HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold HISTORY_MSG_PDSHARPEN_AUTO_CONTRAST;CS - Auto threshold @@ -1748,11 +1750,11 @@ PARTIALPASTE_EXPOSURE;Exposure PARTIALPASTE_FILMNEGATIVE;Film negative PARTIALPASTE_FILMSIMULATION;Film simulation PARTIALPASTE_FLATFIELDAUTOSELECT;Flat-field auto-selection +PARTIALPASTE_FLATFIELDFROMMETADATA;Flat-field from Metadata PARTIALPASTE_FLATFIELDBLURRADIUS;Flat-field blur radius PARTIALPASTE_FLATFIELDBLURTYPE;Flat-field blur type PARTIALPASTE_FLATFIELDCLIPCONTROL;Flat-field clip control PARTIALPASTE_FLATFIELDFILE;Flat-field file -PARTIALPASTE_FLATFIELDFROMMETADATA;Flat-field from Metadata PARTIALPASTE_GRADIENT;Graduated filter PARTIALPASTE_HSVEQUALIZER;HSV equalizer PARTIALPASTE_ICMSETTINGS;Color management settings @@ -1838,6 +1840,7 @@ PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic PREFERENCES_CHUNKSIZE_RGB;RGB processing PREFERENCES_CIE;Ciecam PREFERENCES_CIEARTIF;Avoid artifacts +PREFERENCES_WBA;White Balance PREFERENCES_CLIPPINGIND;Clipping Indication PREFERENCES_CLUTSCACHE;HaldCLUT Cache PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs @@ -2006,7 +2009,6 @@ PREFERENCES_TOOLPANEL_TOOL;Tool PREFERENCES_TP_LABEL;Tool panel: PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles -PREFERENCES_WBA;White Balance PREFERENCES_WORKFLOW;Layout PREFERENCES_ZOOMONSCROLL;Zoom images by scrolling PROFILEPANEL_COPYPPASTE;Parameters to copy @@ -2092,11 +2094,11 @@ SHCSELECTOR_TOOLTIP;Click right mouse button to reset the position of those 3 sl SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled. SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set. SORT_ASCENDING;Ascending +SORT_BY_NAME;By Name SORT_BY_DATE;By Date SORT_BY_EXIF;By EXIF -SORT_BY_LABEL;By Color Label -SORT_BY_NAME;By Name SORT_BY_RANK;By Rank +SORT_BY_LABEL;By Color Label SORT_DESCENDING;Descending TC_PRIM_BLUX;Bx TC_PRIM_BLUY;By @@ -2281,8 +2283,8 @@ TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode TP_COLORAPP_TCMODE_LIGHTNESS;Lightness TP_COLORAPP_TCMODE_SATUR;Saturation TP_COLORAPP_TEMP2_TOOLTIP;Either symmetrical mode temp = White balance.\nEither select illuminant always set Tint=1.\n\nA temp=2856\nD41 temp=4100\nD50 temp=5003\nD55 temp=5503\nD60 temp=6000\nD65 temp=6504\nD75 temp=7504 -TP_COLORAPP_TEMPOUT_TOOLTIP;Temperature and Tint.\nDepending on the choices made previously, the selected temperature is:\nWhite balance\nA temp=2856\nD41 temp=4100\nD50 temp=5003\nD55 temp=5503\nD60 temp=6000\nD65 temp=6504\nD75 temp=7504\nFree. TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD41 temp=4100\nD50 temp=5003\nD55 temp=5503\nD60 temp=6000\nD65 temp=6504\nD75 temp=7504 +TP_COLORAPP_TEMPOUT_TOOLTIP;Temperature and Tint.\nDepending on the choices made previously, the selected temperature is:\nWhite balance\nA temp=2856\nD41 temp=4100\nD50 temp=5003\nD55 temp=5503\nD60 temp=6000\nD65 temp=6504\nD75 temp=7504\nFree. TP_COLORAPP_TONECIE;Use CIECAM for tone mapping TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect. TP_COLORAPP_VIEWINGF_TOOLTIP;Takes into account the support on which the final image will be viewed (monitor, TV, projector, printer, etc.), as well as its environment. This process will take the data coming from process 'Image Adjustments' and 'bring' it to the support in such a way that the viewing conditions and its environment are taken into account. @@ -2757,8 +2759,6 @@ TP_LOCALLAB_CBDL_TOOLNAME;Contrast by Detail Levels TP_LOCALLAB_CENTER_X;Center X TP_LOCALLAB_CENTER_Y;Center Y TP_LOCALLAB_CH;CL - LC -TP_LOCALLAB_CHRO46LABEL;Chroma levels 456: Mean=%1 High=%2 -TP_LOCALLAB_CHROLABEL;Chroma levels 0123: Mean=%1 High=%2 TP_LOCALLAB_CHROMA;Chrominance TP_LOCALLAB_CHROMABLU;Chroma levels TP_LOCALLAB_CHROMABLU_TOOLTIP;Increases or reduces the effect depending on the luma settings.\nValues under 1 reduce the effect. Values greater than 1 increase the effect. @@ -2932,11 +2932,11 @@ TP_LOCALLAB_GAMM;Gamma TP_LOCALLAB_GAMMASKCOL;Gamma TP_LOCALLAB_GAMMASK_TOOLTIP;Adjusting Gamma and Slope can provide a soft and artifact-free transformation of the mask by progressively modifying 'L' to avoid any discontinuities. TP_LOCALLAB_GAMSH;Gamma -TP_LOCALLAB_GAMUTLABRELA;Lab -TP_LOCALLAB_GAMUTMUNSELL;Munsell only TP_LOCALLAB_GAMUTNON;None +TP_LOCALLAB_GAMUTLABRELA;Lab TP_LOCALLAB_GAMUTXYZABSO;XYZ Absolute TP_LOCALLAB_GAMUTXYZRELA;XYZ Relative +TP_LOCALLAB_GAMUTMUNSELL;Munsell only TP_LOCALLAB_GAMW;Gamma (wavelet pyramids) TP_LOCALLAB_GRADANG;Gradient angle TP_LOCALLAB_GRADANG_TOOLTIP;Rotation angle in degrees: -180 0 +180. @@ -3025,8 +3025,6 @@ TP_LOCALLAB_LAPRAD1_TOOLTIP;Increases the contrast of the mask by increasing the TP_LOCALLAB_LAPRAD2_TOOLTIP;Smooth radius uses a guided filter to decrease artifacts and smooth out the transition. TP_LOCALLAB_LAPRAD_TOOLTIP;Smooth radius uses a guided filter to decrease artifacts and smooth out the transition. TP_LOCALLAB_LAP_MASK_TOOLTIP;Solves PDEs for all Laplacian masks.\nIf enabled the Laplacian threshold mask reduces artifacts and smooths the result.\nIf disabled the response is linear. -TP_LOCALLAB_LCLABELS;Residual noise levels -TP_LOCALLAB_LCLABELS_TOOLTIP;Displays the mean and high-end noise values for the area shown in the Preview Panel (at 100% zoom). The noise values are grouped by wavelet levels 0,1,2,3 and 4,5,6.\nThe displayed values are indicative only and are designed to assist with denoise adjustments. They should not be interpreted as absolute noise levels.\n\n 300: Very noisy\n 100-300: Noisy\n 50-100: Moderatly noisy\n < 50: Low noise\n\nThey allow you to see:\n*The impact of Noise Reduction in the main-menu Detail tab.\n*The influence of Non-local Means, Wavelets and DCT on the luminance noise.\n*The influence of Wavelets and DCT on the chroma noise.\n*The influence of Capture Sharpening and Demosaicing. TP_LOCALLAB_LC_FFTW_TOOLTIP;FFT improves quality and allows the use of large radii, but increases processing time (depends on the area to be processed). Preferable to use only for large radii. The size of the area can be reduced by a few pixels to optimize the FFTW. This can reduce the processing time by a factor of 1.5 to 10. TP_LOCALLAB_LC_TOOLNAME;Local Contrast & Wavelets TP_LOCALLAB_LEVELBLUR;Maximum blur levels @@ -3087,13 +3085,11 @@ TP_LOCALLAB_LOGSURSOUR_TOOLTIP;Changes tones and colors to take into account the TP_LOCALLAB_LOGVIEWING_TOOLTIP;Corresponds to the medium on which the final image will be viewed (monitor, TV, projector, printer, etc.), as well as the surrounding conditions. TP_LOCALLAB_LOG_TOOLNAME;Log Encoding TP_LOCALLAB_LUM;LL - CC -TP_LOCALLAB_LUM46LABEL;Luma levels 456: Mean=%1 High=%2 TP_LOCALLAB_LUMADARKEST;Darkest TP_LOCALLAB_LUMASK;Background color/luma mask TP_LOCALLAB_LUMASK_TOOLTIP;Adjusts the shade of gray or color of the mask background in Show Mask (Mask and modifications). TP_LOCALLAB_LUMAWHITESEST;Lightest TP_LOCALLAB_LUMFRA;L*a*b* standard -TP_LOCALLAB_LUMLABEL;Luma levels 0123: Mean=%1 High=%2 TP_LOCALLAB_MASFRAME;Mask and Merge TP_LOCALLAB_MASFRAME_TOOLTIP;For all masks.\nTakes into account the ΔE image to avoid modifying the selection area when the following Mask Tools are used: Gamma, Slope, Chroma, Contrast curve, Local contrast (by wavelet level), Blur Mask and Structure Mask (if enabled ).\nDisabled when Inverse mode is used. TP_LOCALLAB_MASK;Curves @@ -3174,6 +3170,7 @@ TP_LOCALLAB_MERNIN;Screen TP_LOCALLAB_MERONE;Normal TP_LOCALLAB_MERSAT;Saturation TP_LOCALLAB_MERSEV;Soft Light (legacy) +TP_LOCALLAB_MERSEV0;Soft Light Illusion TP_LOCALLAB_MERSEV1;Soft Light W3C TP_LOCALLAB_MERSEV2;Hard Light TP_LOCALLAB_MERSIX;Divide @@ -3183,6 +3180,12 @@ TP_LOCALLAB_MERTHR;Difference TP_LOCALLAB_MERTWE;Exclusion TP_LOCALLAB_MERTWO;Subtract TP_LOCALLAB_METHOD_TOOLTIP;'Enhanced + chroma denoise' significantly increases processing times.\nBut reduce artifacts. +TP_LOCALLAB_LCLABELS;Residual noise levels +TP_LOCALLAB_LCLABELS_TOOLTIP;Displays the mean and high-end noise values for the area shown in the Preview Panel (at 100% zoom). The noise values are grouped by wavelet levels 0,1,2,3 and 4,5,6.\nThe displayed values are indicative only and are designed to assist with denoise adjustments. They should not be interpreted as absolute noise levels.\n\n 300: Very noisy\n 100-300: Noisy\n 50-100: Moderatly noisy\n < 50: Low noise\n\nThey allow you to see:\n*The impact of Noise Reduction in the main-menu Detail tab.\n*The influence of Non-local Means, Wavelets and DCT on the luminance noise.\n*The influence of Wavelets and DCT on the chroma noise.\n*The influence of Capture Sharpening and Demosaicing. +TP_LOCALLAB_LUMLABEL;Luma levels 0123: Mean=%1 High=%2 +TP_LOCALLAB_LUM46LABEL;Luma levels 456: Mean=%1 High=%2 +TP_LOCALLAB_CHROLABEL;Chroma levels 0123: Mean=%1 High=%2 +TP_LOCALLAB_CHRO46LABEL;Chroma levels 456: Mean=%1 High=%2 TP_LOCALLAB_MLABEL;Restored data Min=%1 Max=%2 TP_LOCALLAB_MLABEL_TOOLTIP;The values should be close to Min=0 Max=32768 (log mode) but other values are possible.You can adjust 'Clip restored data (gain)' and 'Offset' to normalize.\nRecovers image data without blending. TP_LOCALLAB_MODE_EXPERT;Advanced @@ -3790,12 +3793,12 @@ TP_TM_FATTAL_AMOUNT;Amount TP_TM_FATTAL_ANCHOR;Anchor TP_TM_FATTAL_LABEL;Dynamic Range Compression TP_TM_FATTAL_THRESHOLD;Detail -TP_TONE_EQUALIZER_BANDS;Bands TP_TONE_EQUALIZER_BAND_0;Blacks TP_TONE_EQUALIZER_BAND_1;Shadows TP_TONE_EQUALIZER_BAND_2;Midtones TP_TONE_EQUALIZER_BAND_3;Highlights TP_TONE_EQUALIZER_BAND_4;Whites +TP_TONE_EQUALIZER_BANDS;Bands TP_TONE_EQUALIZER_DETAIL;Regularization TP_TONE_EQUALIZER_LABEL;Tone Equalizer TP_TONE_EQUALIZER_PIVOT;Pivot (Ev)