* Init levels trc GUI
* Levels TRC
* Complete with gamma based attenuation
* Limit RGB channel Slope with checkbox
* Improve GUI and code channel TRC
* Change default values - compexity levels RGB channels
* Relative gamma mode RGB channel TRC
* Change label and ponderation rolloff
* Change rolloff level
* Threshold attenuation
* Threshold attenuation 2 part
* GUI Link R G B
* Linked RGB with Green slope - RGB channels
* Set Freeman TM functions with ImProcFunctions
* First GUI Abstract profile highlight attenuation
* GUI AP part 2
* Restore olg GUI AP
* Expander AP primaries adn illuminant
* Disable RGB channel TRC
* Expander contrast AP
* Slider attenuation response
* Save work GUI local contrast
* Save GUI part 2 AP curve
* Local contrast GUI Abstract Profile
* Move Abstract profile in toolpanel and ICMpanel
* rtengine variable contrast
* Variable contrast 2
* Variable contrast engine 3
* Variable contrast engine 4
* Variable contrast engine
* Detail levels pyramid
* Engine residual contrast
* Residual contrast
* Change settings detail levels
* Expander refinement - new tooltips - low resid contrast
* Change contrast profile and labels
* Remove warning message GUI Gtk
* Gamutcontrol code - disabled
* Improve with calceffect
* Other improvement variable contrast
* Offset variable contrast
* Range offset - comment code
* Parametric inva fot lut
* Clean cmakelist.txt
* Change contrast profiles
* Comment code ipwavelet
* Added orthogonal Daubechies scaling D20
* Change strenght curve - tooltip Daubechies
* Forgotten changes
* Comment code
* Move variable in process - take into account highlight attenuation
* Display label maximum preview and preset selection
* Remove console message
* harmonize levels wavelets iplocallab
* Tooltips contrast enhancement
* Change tooltip Contrast profile
* Chnage tooltip Contrast
* Message warning preview size
* Change gamma TRC values in GUI
* Remove itanium architecture support for windows as PR 7105
* Change windows.yml and appimage.yml
* Windows.yml apseimprov
* Clean and comment ipwavelet
* Clean comment icmpanel.cc
* Harmonize local contrast wavelet Selective editing with Abstract profile
* Harmonize with AP - offset
* vanishing moment D20 - Selective editing wavelet
* Offset only in advanced mode
* GUI expander contrast enable and pyrwavtrc
* Clean and comment code
* merge with dev
* Prepare sigmoid based
* Contrast sigmoid GUI
* Skew sigmoid GUI
* Sigmoid tone mapper in iplocallab
* Change GUI settings
* White-point and black-point auto
* Change EvDCP to ALLNORAW as others events DCP
* Change default skew
* Change settings - enable scale Yb
* Display white point - advanced mode
* Improve GUI
* Clean unused variable
* new sigmoid Q in cam16
* Change tooltips and default sigmoid Q settings
* Sigmoid Jz
* Clean code Jz and sigmoid
* Harmonize Sigmoid Q and Sigmoid RGB
* Harmonize Sigmoid Jz
* Clean code
* Improve labels wit cd/m2
* Slope base Q methode first
* GUI slope based Q
* Change default settings and tooltips
* Change tooltips
* Clean code - change default setting
* Change default local contrast & wavelet to wavelet & basic mode
* Fixed bad assignation slopesmoq
* Improve sigmoid and slope based Q - GUI for Log encoding Color appearance
* Remove wrong change
* various small improvments
* Allows black and white AP and SDA in basic mode
* Change the writing of wGamma and wSlope - attenuates the effect of the first 2 AP contrast profiles
* Clean code wgamma wslope
* Set curve Cam16 in basic mode
* Change position curve in GUI cam16
* Enable tonecurve1 in colorappearance & lighting in standard mode
* Fixed bug scale yb scene - ciecam curve - change default contrast enhancement
* not reset curve shape ciecam in strandard
* Change label Tone mapping operators and tooltips
* Change some labels and tooltips - Appearance - Mask and Mofifications - Recovery Based On Luminance Mask
* Forgotten changes
* Clean locallabtools2.cc
* Maxlevel wavelet minimum to 5
* Reset mask and modifications in SE wavelet and all tools in Global
* Show modified areas SE wavelet
* Tooltip show wavelets decomposition
* Fixed another bad behavior in Global - changes also in color & light for merge file
* Change behavior fullimage - global as in PR GHS
* Disable all mask and modifications in Global but remain active in fullimage and normal
* Set expander expanded = true
* Chane contrast enhancement coef
* Replace VBox trcWavVBox by ToolParamBlock trcWavFBox
* Forgotten code in icmpanel read pedited opacityShapeWLI - hope solve batch mode
* Change RGB Slope behavior with link
* No access to last level contrast enhancement
* Move Abstract Profile tooltip to title
The tooltip was popping up when the cursor was over almost any part of
the tool which was inconvenient. Now, the tooltip only appears when
hovering over the title.
* Improve Color Management expanders behavior
By default, collapse Abstract Profile and leave it's sub-expanders
expanded.
Keep the expanded state of all the sub-expanders during the editing
session.
Fix the right-click behavior. The clicked expander should be expanded
and all siblings, if any, should be collapsed.
* Fix RGB slope tone mapping RGB linkage
Synchronize the red, green, and blue values before updating the preview
to avoid using incorrect values to generate the preview.
* Fix SE CAM tone mapping slider defocus
Avoid unnecessarily hiding then showing the adjusters in tone mapping so
that focus is not lost while adjusting the adjusters.
* Delete history kslopesmo - remove IcmOpacityCurveWL
* change the tooltips as suggested by Lawrence
* Review L37 - change strengthjz strengthlc - MIDDLE_GREY MIDDLE_GREYjz - artifacts ciecam
* Change name Tone map freeman functions
* Remove gamutcont - rename localcont - change allocation memory wdspot
* Clean procparams
* remove sigmoidsenscie - logcieq
* Added * to three labels 'sigmoid' - change tooltip which shows the incompatibility with 5.11
* Forgotten correction suggested by Lawrence
* Compatibility 5.11 log encoding - sigmoid part 1
* Compatibility 5.11 part 2
* Compatibility 5.11 - step 3
* Compatibility 5.11 - step 4
* Compatibility 5.11 step xx
* Compatibility 5.11 - combobox operators Q and J
* Compatibility 5.11 Cam16 GUI first part
* Improve GUI Cam16 sigmoid compatibility
* Compatibility 5.11 Jz - sigmoid - step 1
* Compatibility 5.11 Jz gui step 2
* Compatibility 5.11 Jz GUI step x
* Compatibility 5.11 Jz - history - etc.
* Various change labels - history ...
* Improve GUI - hide show 5.11 5.12
* Jz 5.11 in iplocallab - step 1
* Compatibility 5.11 iplocallab cam16 step 1
* Improve GUI hide show 511 512
* Solved - I hope - GUI problem with tone mapper Q and J 5.11 and 5.12
* Compatibility 5.11 iplocallab Cam16 step 2
* Improve GUI compatibility 5.11 labels tooltips
* Small improvments GUI - labels - history...
* Fixed typo in paramsedited.cc clcurve issue 7283
* Change tooltips method 5.12 - 5.11 for cam16 and Jz brightness Q or J
* Clean and refine code
* Various change dafult language and CAM16 CAM02 replace by Cam16 Cam02
* Change modeQJ method for 5.11 in function ppversion
* Change labels as suggested by Wayne PR 7111
* Others changes suggested for label
* Change tooltips as suggested in PR
* Use unique pointer instead of manual management
* Update rtdata/languages/default
Co-authored-by: Lawrence37 <45837045+Lawrence37@users.noreply.github.com>
* Change all Cam16 references to CAM16
* Change convention uppercase and lowercase in frame - checkbox
* Improve tooltips for Tone Mapping Operators
* Another change CIECAM and uppercase lowercase in checkbox
* Remove appimage and windows yml
---------
Co-authored-by: Lawrence Lee <45837045+Lawrence37@users.noreply.github.com>
* Use target_include_directories to specify include paths
* Specify project root (parent of rtgui and rtengine) as include path
* Replace relative includes with normal includes
raw files, usually dng files, can provide a dcp profile by providing the
related tags.
This patch will make the "Use embedded" options in the color management
panel selectable if the source raw file embeds a dcp profile.
In this case the DCP panel will be enabled like when reading an external
dcp profile.
Additional changes:
* Rename "Use embedded, if possible" to just "Use embedded" since the
option is already disabled when no embedded profile is found.
* Update the "Use embedded" options tooltip as it's now not related to
only non raw images.
* Change estimchrom estim hue final
* Itcw observer checkbox
* 8 spectral colors
* 11 spectral colors
* 6 spectral colors
* Small change to correction green
* Fixed various bad behavior - settings itcwb_deltaspec
* 4 spectral colors green
* 3 green spectral colors
* 3 spectral colors green
* 5 spectral colors red green
* 3 spectral colors red green
* 3 spectral colrs green red
* Chnage slider choice deltaE - to size color patch
* display more info in console
* Display more info in console - comment code
* Clean - comment code
* 8 spectral colors green red
* 8 spectral colors blue
* 8 spectral colors blue
* 3 spectral colors
* 6 spectral colors
* 4 spectal colors
* 2 spectral colors
* Eliminate high Y - increse temp iteration - recenter selection inside patch
* compatibility 5.9
* Modify dislay and place selected dats in patch
* Dispaly in console hue chroma image selection
* First optimization
* optimization code - clean unused variables
* Remove sorted in chroma order - some others changes
* 5.9 compatibility
* Clean and optimize code
* Clean code - more display info in console
* More info in console - set itcwb_minsize in option
* Display patch chroma in GUI
* Change some default settings
* Minsize patch GUI
* Display GUI patch size
* Chroma patch variations
* Display in GUI min and max dats found in patch
* Some adjustments
* Remove too low datas in patch
* Various improvment - ponderate
* Clean code colortemp comment spectral datas
* Comment code - correc gren
* Comment and refine code
* Fixed bug in improcoordinator
* fixes a malfunction of AWB bias in improcoordinator
* Various improvments - clean code
* 2 improvments green and find patch
* Allows parametrind ponder and Ypurple in options
* Update autowb - filter on magenta purple
* Clean and optimize code
* Read colors in GUI
* Denoise median 5x5 image datas before Itcwb
* Change to GUI
* Replace median5x5 by 2 median3x3 - clean GUI code
* Work around to recalculate wbauto
* Remove work around - change params->wb related change
* Disabled low_sampling 5.9
* First try for compatibility Low sampling 5.9
* Re-enable WB autogrey
* Change reference image to autogrey if camera settings probably out
* Clean code aand adjust settings camera out
* Format astylert rawimagesource.cc - various small adjustments
* Small correction
* Small green correction
* Change default settings - correction to autowb bias in improccoordinator
* Save provisory work
* Save provisory work 2
* Try to find good tempitc with iterate when temptitc very different 5000K
* Change 2 default settings
* Work around awb temp bias
* Limit work around bias - small other changes
* 3 spectral colors deep blue
* 4 spectral color deep blue
* 4 color spectral yellow
* 5 spectral colors neutral red-magenta
* 5 spectral color neutral red magenta
* Change threshold tempitc
* 5.9 compatibility
* Work around bad claculation Planck's formula
* Fixed bad behavior when using blackbody spectal
* 6 spectral color - checkbutton remove 2 passes
* Fixed various bugs
* Format rawimagesource.cc
* Various improvment before to find the good selection
* First new optimization (perhaps?)
* Display GUI patc deltaE
* Various optimzation and tooltip
* Default observer 2°- Simplify GUI - improve display GUI - remove too low numbers datas
* 4 spectral colors - change 2 settings
* Change calculation threshold 2 passes
* 6 spectral colors magenta
* 13 spectral colors
* Improvment GUI display
* remove checkbutton no_purple
* 2 spectral colors - remove in GUI low sampling 5.9
* Change default setting display in console
* Change behavior when temp near stdA
* 4 spectral colors - settings Itcwb_tempstdA
* Gamut control on image histogram
* Clean code and format rawimagesource.cc
* Comment and format colortemp.cc
* Remove unused fileds from GUI - change tooltips
* Add tooltips
* Various changes
* Change settings when camera temperature is out
* improvment extra and tooltip
* Small change when using auto grey as start reference
* Remove itcwb_fgreen from GUI
* Various change - and 'unsatisfactory' test to take into account Custom
* Change second temp when < 4000 - replace automatic by automatic and refinement
* Neutralize 'Use custom tempertaure and green'
* Green refinement
* Clean code - small changes
* Other clean code
* Added forgotten itcw_green in procparams.cc
* Fixed a bug dispaly deltaE
* Change threshold settings - change code for Custom
* various change in case of using camera settings
* Change way to estimate range green
* clean code and message in console
* Clean and optimize
* Disable 2 passes if custom
* Improve GUI 2 passes
* Increase sampling and number of temperature above 9400K
* Hide AWB temperature bais and green refinement when Custom temerature ans green
* marks out the code with past time markers
* Improve time processing with spectral colors temp calculations
* Replace in console msec by nsec
* Scan temp 5.9
* Change max temp and behavior if temp > 15000k
* Refine temp near 14000K
* Increase sampling temperature 132 to 167
* Increase sampling temperature
* Set in preference choice for itcwb_custom
* White point calculated with observer instead of table
* More on whitepoint calculation - informations
* Clean and format code with astyle colortemp.cc rawimagesource.cc improccoordinator.cc
* Small change tooltip
* Improve update auto-wb
* Remove 'use custom temperature and tin' - simplify sampling to 2 choice
* Small change to rand AWB bias - green refinement - tooltips
* slightly modify the parameters upstream of the algo - do not use camera in some cases
* Mixed initial green
* Refine init green and temp when no camera
* Refine temp and green in do not use camera settings
* Change tint threshold and various improvments (tooltips, wrong values..)
* Refinment and clean code
* Improve mode No use camera settings
* Init nocam
* Refine use no camera settings
* Small change
* 5.9 compatibility - and format
* Refine sampling temperature around 7000 - 8000K
* Format astylert rawimagesource colortemp
* 5.9 settings
* 5.9 settings 2
* Various change - 5.9 - format
* Improve pre and post algorithm
* Fixed correction temp > 8000K
* Fixed bad behavior Tppat.minchroma
* Change sampling choices and tooltip
* Change name wp wp2 wip to wb wb2 iwb to avoid misunderstood
* Small Change settings - limit display studgood to 0.0001
* Improvment display GUI temp
* Change default sampling
* Change ACESP0 to JDCmax
* Improve GUI abstract profile
* Allows dispaly in console xy values thanks to Reffort
* Remove bruce rgb in wp and abstract
* Change wp abstract and save itcwb with dispaly cellxy
* Change prim = 13 improccoordinator iplab2rgb
* remove display datas in console - fixed wrong display Y xyY
* Fixed ifferences in GUI maxhist minhist
* Change limits x y in function sampling
* fixed a dizziness
* Change after algorithm rule when temp > 6000K
* Harmonize limx limy for oldsampling 5.9
* Added Cam xyz matrix to sampling - thanks to Reffort
* Display in console xyz matrix
* Forgotten instruction when mix camera and autowb grey
* Change rgbloc with Camera matrix Dcraw when no input profile
* Change rep to repref in rgbxyz
* Remove message in console
* 5.9 compat
* 5.9 compat 2
* 5.9 compat 3
* 5.9 compat 4
* 5.9 compat 5 format
* 5.9 compta 6
* Improve code
* Diasble itcwb_sampling in GUI
* Comment code
* Clean and comment code
* 5 spectral colors
* 9 spectral colors
* 2 spectral colors
* Various improvments
* 5 spectral colors
* 5 spectral colors
* First changes review lawrence37
* Second changes review Lawrence37
* 3rd changes review Lawrence37
* 4th changes review Lawrence37
* Change windows and appimage yml
* Re-enable Rtv4_Bruce in procparams.cc
* test for 5.9 compatibility
* Try to fixed crash
* Slightly improve the management of 5.9
* test for 5.9 compatibility by passing parameters via the GUI
* Forgotten parameter
* Change ref_spec limit and remove pac_start for itcwb_sampling
* Puts back the old Planck formula - the same as in dev
* Revert "test for 5.9 compatibility by passing parameters via the GUI"
This reverts commit d6b5a8feda31b93a5574cee6ebf4d3e9d58bbcfb.
* Switch to new ITCWB only when changing WB method
Prevents sudden changing of the white balance if ITCWB is selected and
the image is reopened.
* Fix spelling in comment
* Suggested change from Lawrence37 to whitebalance - small change to improcoordinator
* tempbias Set_sentive(false) if itcwb_smapling - clean whitebalance
* Another clean whitebalance.cc
---------
Co-authored-by: Lawrence Lee <45837045+Lawrence37@users.noreply.github.com>
* Gamut control when the chosen primaries are different from working profile
* Gamut control abstract
* Gamut label and history
* Change to Wx Wz
* Fixed crash if y primaries are set to zero
* Fomated with Astylert ImProcFunctions::workingtrc and Color::primaries_to_xyz
* Fixed black becomes green wit gamt abstract profile
* Harmonize types in color.cc
* Try to fix Multiplication result converted to larger type
* Change TRC in the process
* Improve GUI slope
* Add tooltip output profile
* Various change to enable and tooltip
* Chnage rtthumbnail
* Small change tooltip trc
* Another small change tooltip
* Improve GUI - change default TRC BT709 - change tooltip
* Other GUI improvment
* Small changes to BT709 values
* Various change to TRC - add illuminant working profile
* Change labels tooltip TRC illuminant
* Display wp in console if wp provided
* Change tooltip
* Change max wlope
* Init trc + illum + primaries
* Add black point compensation
* Change location abstract
* Fixed bug with rtthumbnail...
* Added tooltip
* Logscale for wslope
* Change tooltip abstract
* Change labels tooltips abstract profile
* Added 6 sliders custom primaries X and Y
* Change GUI custom primaries
* Use custom primaries abstract profiles
* Tooltip with primaries red green blue
* Fixed warning gtk
* Change one tooltip
* Change range custom primaries
* Change GUI default Primaries
* Change one tooltip
* Speedup for trc
* Rendering intent for abstract profile
* Hide intent abstract
* Preserve neutral tones
* Chnage settings preserves neutral tones
* Improve GUI
* Improvment to preserv
* Clean code - speedup TRC when illuminant and primaries default
* Change label
* Change bad default value Blux
* Add forgoten illuminant when selecting primaries
* clean code
* Change labels
* improve workingtrc for LA
* Change default primaries when select default
* Added others working profile to primaries
* Change labels and GUI
* Change tooltip
* CIExy diagram displaying the primaries (interactive) and the white point (#6207)
* Ciexy diagram
* Change to Ciexy graph
* Change graph and defaut coordonates
* Various changes to graph - params
* Disable setListener(ToolPanelListener)
* Add some graduation to graph
* Clean comment code graph
* Change radius 0
* Enable sensitive graph Ciexy
* update Ciexy graph with primaries
* Remove reset button graph
* Change labels and behavior
* First step third spot green
* Second step 3rd spot green
* First try 3 primaries graph Ciexy
* Fixed bad behavior in lab grid
* Fixed another bad behavior graph
* Clean and comment code
* Change default gamma
* More accurate graph Cie xy
* Added white point to Ciexy graph
* Added tooltip Cie xy diagram
* Improvment when illuminant change
* Refine diagram CIE xy - added WP 2000K
* White point D120 + tooltip
* Change label
* Change labels
* Change tooltips
* Improve diagram CIE xy with parabolic
* Other parabolic to improve Cie xy diagram
* Small change GUI
* Added Label CIE xy - change labels
* Change behavior when none - change labels
* Improve gUI and trys to fix LGTM alerts
* CIE xy change set sensitive
* Improve tooltip primaries sliders
* Adapt tooltip to new labels
* Fixed crash and some bad behavior
* First fix bad behavior with some primaries
* Second fixed bad behavior primaries
* Third fixed bad behavior primaries
* Change white point BestRGB
* Change order rgb in history msg Ciexy
* Change tooltip
* Change tooltip
* Improve GUI primaries
* Illuminant 1500K - display in console matrix XYZ-RGB
* Improve GUI illuminant
* Change a tooltip
* Somme changes to GUI and verbose
* Test code for wprim in read
* clean code for wprims
* further cleanups, not tested
* Some cleanups and bugfixes, #5949
* Simplify `std::unique_ptr<>` dereferencing
Also some minor cleanups.
* Some changes suggested by Floessie
* Others change suggested
* Others changes suggested by Floessie
* Forgotten change in procparams.cc
* Added black and white for use with the primaries channel mixer
* Small change behavior GUI - illuminant
* Change pragma omp in iplab2rgb
* Add enums and clean up
* Remove unused code icmpanel.cc
* Fix LGTM alert, #5949
Co-authored-by: Ingo Weyrich <heckflosse67@gmx.de>
Co-authored-by: Flössie <floessie.mail@gmail.com>
Replaces the following deprecated Gtk classes throughout the codebase by their non-deprecated counterparts. Style, HBox, VBox, HPaned, VPaned, HScrollbar, VScrollbar, VSeparator, HSeparator, Stock, Table, VScale and HScale.
- Exif of all frames are displayed in the Editor's Exif tab (without
separator)
- isHDR and isPixelShift is added to the data files stored in cache
- In the Editor panel, the QuickInfo frame display the HDR and
PixelShift information, as well as the number of frame and bit-depth for
HDR image
- the number of frame is provided by dcraw. If not set, it is provided
by the Exif's main IFD count
- the PixelShift information (for Pentax as of now) is provided by
looking at the Exif informations
- the HDR information is provided by the Exif information of the first
frame for Pentax raw files, or by the bitspersample, sampleformat and
compression tags for other files
TODO: add icons to the thumbnails to tag HDR and PixelShift files.
CMM at the end of the pipeline + sparse code refactoring
A new BPC checkbutton has been created in 'Preferences/Color Management'
and in the ICM tool. Better hanbling of widget sensitivity of the output
profile / gamma part of the ICM tool.
