* Change TRC in the process
* Improve GUI slope
* Add tooltip output profile
* Various change to enable and tooltip
* Chnage rtthumbnail
* Small change tooltip trc
* Another small change tooltip
* Improve GUI - change default TRC BT709 - change tooltip
* Other GUI improvment
* Small changes to BT709 values
* Various change to TRC - add illuminant working profile
* Change labels tooltip TRC illuminant
* Display wp in console if wp provided
* Change tooltip
* Change max wlope
* Init trc + illum + primaries
* Add black point compensation
* Change location abstract
* Fixed bug with rtthumbnail...
* Added tooltip
* Logscale for wslope
* Change tooltip abstract
* Change labels tooltips abstract profile
* Added 6 sliders custom primaries X and Y
* Change GUI custom primaries
* Use custom primaries abstract profiles
* Tooltip with primaries red green blue
* Fixed warning gtk
* Change one tooltip
* Change range custom primaries
* Change GUI default Primaries
* Change one tooltip
* Speedup for trc
* Rendering intent for abstract profile
* Hide intent abstract
* Preserve neutral tones
* Chnage settings preserves neutral tones
* Improve GUI
* Improvment to preserv
* Clean code - speedup TRC when illuminant and primaries default
* Change label
* Change bad default value Blux
* Add forgoten illuminant when selecting primaries
* clean code
* Change labels
* improve workingtrc for LA
* Change default primaries when select default
* Added others working profile to primaries
* Change labels and GUI
* Change tooltip
* CIExy diagram displaying the primaries (interactive) and the white point (#6207)
* Ciexy diagram
* Change to Ciexy graph
* Change graph and defaut coordonates
* Various changes to graph - params
* Disable setListener(ToolPanelListener)
* Add some graduation to graph
* Clean comment code graph
* Change radius 0
* Enable sensitive graph Ciexy
* update Ciexy graph with primaries
* Remove reset button graph
* Change labels and behavior
* First step third spot green
* Second step 3rd spot green
* First try 3 primaries graph Ciexy
* Fixed bad behavior in lab grid
* Fixed another bad behavior graph
* Clean and comment code
* Change default gamma
* More accurate graph Cie xy
* Added white point to Ciexy graph
* Added tooltip Cie xy diagram
* Improvment when illuminant change
* Refine diagram CIE xy - added WP 2000K
* White point D120 + tooltip
* Change label
* Change labels
* Change tooltips
* Improve diagram CIE xy with parabolic
* Other parabolic to improve Cie xy diagram
* Small change GUI
* Added Label CIE xy - change labels
* Change behavior when none - change labels
* Improve gUI and trys to fix LGTM alerts
* CIE xy change set sensitive
* Improve tooltip primaries sliders
* Adapt tooltip to new labels
* Fixed crash and some bad behavior
* First fix bad behavior with some primaries
* Second fixed bad behavior primaries
* Third fixed bad behavior primaries
* Change white point BestRGB
* Change order rgb in history msg Ciexy
* Change tooltip
* Change tooltip
* Improve GUI primaries
* Illuminant 1500K - display in console matrix XYZ-RGB
* Improve GUI illuminant
* Change a tooltip
* Somme changes to GUI and verbose
* Test code for wprim in read
* clean code for wprims
* further cleanups, not tested
* Some cleanups and bugfixes, #5949
* Simplify `std::unique_ptr<>` dereferencing
Also some minor cleanups.
* Some changes suggested by Floessie
* Others change suggested
* Others changes suggested by Floessie
* Forgotten change in procparams.cc
* Added black and white for use with the primaries channel mixer
* Small change behavior GUI - illuminant
* Change pragma omp in iplab2rgb
* Add enums and clean up
* Remove unused code icmpanel.cc
* Fix LGTM alert, #5949
Co-authored-by: Ingo Weyrich <heckflosse67@gmx.de>
Co-authored-by: Flössie <floessie.mail@gmail.com>
* Enable dynamic range - settings normalize luminance
* Change range DR sigma offset
* improve normalize_mean_dt with mean std before
* Save work on normalize dynamic range
* Improve normalize for TM
* Added LA retinex to normalize_mean
* Clean and optimize code
* Disabled normalize DR - improve TM and Retinex
* Clean code - first part
* Clean code - part two
* Change 2 default values Retinex
* Change order TM and Retinex in process
* remove the order number in - add tool to current spot -
* Fixed bug in TM
* Some change Retinex - default...
* optimize mean sigma
* cleanup for mean_sig
* Fix some cppcheck issues
* convert one large loop into three loops to avoid performance penalty on machines with 4-way L1 cache
Co-authored-by: Ingo Weyrich <heckflosse67@gmx.de>
* Remove unfilled formatting placeholders in KLT parser.
* Fix presumably unintentionally missing reference on PlanatPtr and ChunkyPtr call operators.
* Fix catching pointer and make use-after-free of workimg easier to spot.
Make sure all of our thrown exceptions derive from std::exception and then catch
by reference instead of by pointer.
* Fix mismatch between array form new and non-array form delete.
* Simplify memory management of embedded color profiles by unifying allocation to use operator new.
* LA change location in pipeline
* Improvment to events
* Second improvment events
* Another change events
* Change all events TRANSFORM to HDR
* Change in Log encoding for exposure now after
* Small change in Log encoding for calculation Black Ev and White Ev
* Change events for log encoding
* Add M_INIT | M_LINDENOISE | M_HDR to dcrop.cc
* Avoid unnecessary convertion from rgb to lab and back if local adjustments are not used, #6069
* Tooltip preview dE - disabled when BW
* Fixed issue 6092 - preview dE when BW is enabled
Co-authored-by: Ingo Weyrich <heckflosse67@gmx.de>
* Added support for non-raw files to the film negative tool. The tool is now under the "Color" tab. Moved the entire filmneg code downstream, right after input profile conversion.
Usage changes a bit: White Balance must be set to the _backlight_ color temperature. Added two more sliders to color-balance the picture after negative inversion. Legacy inversion method kept for compatibility with processing profiles saved by RT v5.7 or 5.8 (only if Film Negative was enabled). Should be removed in a future version.
There is still an issue with DCP profiles that need the look table to be active to work properly. Using a simple matrix input profile (or just camera standard) is recommended for now.
* The user can now choose to perform inversion before or after input colorspace conversion.
Seamless backwards compatibility with previous processing profiles; upgrading from a previous version now gives an (almost) identical output as before.
Generalised the concept of film base values: the processing profile now contains a pair of RGB triplets, "reference input" and "reference output", which makes it much more straightforward to compute the output multipliers.
* Added support for `RGB` data type to putToKeyFile, removed the now unused `RGB::toVector()` method. Some cleanup.
* Spot balance picker now stays active indefinitely. Can be disabled by right-clicking, too.
* Removed film negative from `filterRawRefresh` condition, since the new version does not require raw rendering anymore.
* The Output Level slider is now exponential, so it should feel more familiar to use (similar to the exposure compensation slider).
* Removed old `RedBase`, `GreenBase`, `BlueBase` keys from the PP3 file after params upgrade. Keys are only kept if the file only undergoes batch edit (hence no params upgrade was done).
* Made the balance sliders exponential and centered at zero. Now they should be a bit smoother and possibly more user-friendly.
* Changed adjusters' step to more useful values, they were too fine-grained and hard to adjust using the +/- spinbutton.
Increased max ratio value from 3 to 5, as i found an old negative needing a very high blue channel exponent.
* Added an initial processing profile for film negative inversion, to be provided as a bundled profile.
* Removed Output Level and balance sliders when in batch mode: since the effect of these sliders is dependent on the reference input values, those values needed to be copied as well. And, touching any of the sliders needed to flag all three as dirty. All this felt more confusing than useful.
It should be sufficient (and clearer) to copy/paste the params, and then fine-tune the balance on individual pictures when needed.
* Set bayer demosaic method to RCD in the bundled "Film Negative" processing profile. RCD seems to play a bit better with Capture Sharpening in the presence of film grain, compared to Amaze.
This will favor new users starting with all-defaults settings, hence having Capture Sharpening enabled by default.
* Removed incorrect "contrast" term from the "Reference exponent" label. This parameter adjusts the image _gamma_, not its contrast.
* First LA log encoding ciecam
* Some changes hide show and tooltip
* Change label - tooltip
* Change max slider shadow
* Fixed bad behavior cat02 adaptation in some cases
* Another fix Cat02 GUI
* LA log encode add ciecam saturation
* LA log encoding - added contrast J ciecam
* LA Log encode various changes GUI labels tooltips
* Change 2 tooltips
* Clean code
Previously, changing to a different scope was done by clicking the scope
type button and cycling through all scopes. This commit decreases the
number of clicks needed to switch between two scopes by adding a radio
selector. The radio buttons can be shown or hidden by pressing the scope
type button. This commit also makes the raw histogram one of the scope
types.
* First wavelet denoise
* Gui for wavel denoise
* First version local contrast and denoise
* Second version local contrast and denoise
* second version GUI equalizer
* enable equalizer local contrast denoise 1234
* change local contrast curve defaut
* disable local contrast when curve 1
* denmethod in advanced - standard
* Simulate slider denoise with curve
* Some various chnages
* Chnage reference local contrast
* GUI part reference local contrast
* Enable reference noise mix denoise for local contrast denoise
* Improvment to reference local contrast denoise
* Display comment in console
* Best format string in console
* Change agressive denoise limit to 50 - added tooltip
* Added method quality denoise - change madL in ftblockdn
* Change equalizer 1234 settings - added high level local contrast
* added high levels local contrast curve
* Fixed sigma local contrast
* clean format code
* Some improvments
* normalize level slider high level threshold
* change ordonate curve high level contrast
* Fixed bad level for curve high levels - simplify GUI standard
* several changes - guidefilter final - new double slider threshold
* save provisory work
* save GUI work GF threshold
* save provisory work
* Fixed some bad behavior GUI
* save GUI Hue GF
* Curve Hue for GF
* OMP for hue GF
* addes noisevarhue and fixed some bug
* save GUI equalizer hue
* enable equalizer hue
* Fixed bad behavior GUI in advanced mode
* change some default values
* Others change default values
* Change in progressivity slider threshold local contrast
* simplifie algorithm and GUI
* Added tooltip and chnage some labels
* Change labels and tooltip wavelet denoise
* added level 5 denoise
* Change typo in label guided theshold
* Various changes labels tooltip
* Change minimum wavelet level
* Added level 5 to denoise
* Change slider sigm for a double slider sigm03 sigm45
* small delay for double slider sigm
* Fixed wrong values sigm
* Hide level56 in standard complexity
* Improve in standard complexity
* Various improvment levels 14
* interaction 56 14 - advanced complexity
Only perform calculations for the currently shown scope.
Cache the waveform so it can be reused when the scope is resized.
Increase speed of waveform rendering.
