* Init levels trc GUI
* Levels TRC
* Complete with gamma based attenuation
* Limit RGB channel Slope with checkbox
* Improve GUI and code channel TRC
* Change default values - compexity levels RGB channels
* Relative gamma mode RGB channel TRC
* Change label and ponderation rolloff
* Change rolloff level
* Threshold attenuation
* Threshold attenuation 2 part
* GUI Link R G B
* Linked RGB with Green slope - RGB channels
* Set Freeman TM functions with ImProcFunctions
* First GUI Abstract profile highlight attenuation
* GUI AP part 2
* Restore olg GUI AP
* Expander AP primaries adn illuminant
* Disable RGB channel TRC
* Expander contrast AP
* Slider attenuation response
* Save work GUI local contrast
* Save GUI part 2 AP curve
* Local contrast GUI Abstract Profile
* Move Abstract profile in toolpanel and ICMpanel
* rtengine variable contrast
* Variable contrast 2
* Variable contrast engine 3
* Variable contrast engine 4
* Variable contrast engine
* Detail levels pyramid
* Engine residual contrast
* Residual contrast
* Change settings detail levels
* Expander refinement - new tooltips - low resid contrast
* Change contrast profile and labels
* Remove warning message GUI Gtk
* Gamutcontrol code - disabled
* Improve with calceffect
* Other improvement variable contrast
* Offset variable contrast
* Range offset - comment code
* Parametric inva fot lut
* Clean cmakelist.txt
* Change contrast profiles
* Comment code ipwavelet
* Added orthogonal Daubechies scaling D20
* Change strenght curve - tooltip Daubechies
* Forgotten changes
* Comment code
* Move variable in process - take into account highlight attenuation
* Display label maximum preview and preset selection
* Remove console message
* harmonize levels wavelets iplocallab
* Tooltips contrast enhancement
* Change tooltip Contrast profile
* Chnage tooltip Contrast
* Message warning preview size
* Change gamma TRC values in GUI
* Remove itanium architecture support for windows as PR 7105
* Change windows.yml and appimage.yml
* Windows.yml apseimprov
* Clean and comment ipwavelet
* Clean comment icmpanel.cc
* Harmonize local contrast wavelet Selective editing with Abstract profile
* Harmonize with AP - offset
* vanishing moment D20 - Selective editing wavelet
* Offset only in advanced mode
* GUI expander contrast enable and pyrwavtrc
* Clean and comment code
* merge with dev
* Prepare sigmoid based
* Contrast sigmoid GUI
* Skew sigmoid GUI
* Sigmoid tone mapper in iplocallab
* Change GUI settings
* White-point and black-point auto
* Change EvDCP to ALLNORAW as others events DCP
* Change default skew
* Change settings - enable scale Yb
* Display white point - advanced mode
* Improve GUI
* Clean unused variable
* new sigmoid Q in cam16
* Change tooltips and default sigmoid Q settings
* Sigmoid Jz
* Clean code Jz and sigmoid
* Harmonize Sigmoid Q and Sigmoid RGB
* Harmonize Sigmoid Jz
* Clean code
* Improve labels wit cd/m2
* Slope base Q methode first
* GUI slope based Q
* Change default settings and tooltips
* Change tooltips
* Clean code - change default setting
* Change default local contrast & wavelet to wavelet & basic mode
* Fixed bad assignation slopesmoq
* Improve sigmoid and slope based Q - GUI for Log encoding Color appearance
* Remove wrong change
* various small improvments
* Allows black and white AP and SDA in basic mode
* Change the writing of wGamma and wSlope - attenuates the effect of the first 2 AP contrast profiles
* Clean code wgamma wslope
* Set curve Cam16 in basic mode
* Change position curve in GUI cam16
* Enable tonecurve1 in colorappearance & lighting in standard mode
* Fixed bug scale yb scene - ciecam curve - change default contrast enhancement
* not reset curve shape ciecam in strandard
* Change label Tone mapping operators and tooltips
* Change some labels and tooltips - Appearance - Mask and Mofifications - Recovery Based On Luminance Mask
* Forgotten changes
* Clean locallabtools2.cc
* Maxlevel wavelet minimum to 5
* Reset mask and modifications in SE wavelet and all tools in Global
* Show modified areas SE wavelet
* Tooltip show wavelets decomposition
* Fixed another bad behavior in Global - changes also in color & light for merge file
* Change behavior fullimage - global as in PR GHS
* Disable all mask and modifications in Global but remain active in fullimage and normal
* Set expander expanded = true
* Chane contrast enhancement coef
* Replace VBox trcWavVBox by ToolParamBlock trcWavFBox
* Forgotten code in icmpanel read pedited opacityShapeWLI - hope solve batch mode
* Change RGB Slope behavior with link
* No access to last level contrast enhancement
* Move Abstract Profile tooltip to title
The tooltip was popping up when the cursor was over almost any part of
the tool which was inconvenient. Now, the tooltip only appears when
hovering over the title.
* Improve Color Management expanders behavior
By default, collapse Abstract Profile and leave it's sub-expanders
expanded.
Keep the expanded state of all the sub-expanders during the editing
session.
Fix the right-click behavior. The clicked expander should be expanded
and all siblings, if any, should be collapsed.
* Fix RGB slope tone mapping RGB linkage
Synchronize the red, green, and blue values before updating the preview
to avoid using incorrect values to generate the preview.
* Fix SE CAM tone mapping slider defocus
Avoid unnecessarily hiding then showing the adjusters in tone mapping so
that focus is not lost while adjusting the adjusters.
* Delete history kslopesmo - remove IcmOpacityCurveWL
* change the tooltips as suggested by Lawrence
* Review L37 - change strengthjz strengthlc - MIDDLE_GREY MIDDLE_GREYjz - artifacts ciecam
* Change name Tone map freeman functions
* Remove gamutcont - rename localcont - change allocation memory wdspot
* Clean procparams
* remove sigmoidsenscie - logcieq
* Added * to three labels 'sigmoid' - change tooltip which shows the incompatibility with 5.11
* Forgotten correction suggested by Lawrence
* Compatibility 5.11 log encoding - sigmoid part 1
* Compatibility 5.11 part 2
* Compatibility 5.11 - step 3
* Compatibility 5.11 - step 4
* Compatibility 5.11 step xx
* Compatibility 5.11 - combobox operators Q and J
* Compatibility 5.11 Cam16 GUI first part
* Improve GUI Cam16 sigmoid compatibility
* Compatibility 5.11 Jz - sigmoid - step 1
* Compatibility 5.11 Jz gui step 2
* Compatibility 5.11 Jz GUI step x
* Compatibility 5.11 Jz - history - etc.
* Various change labels - history ...
* Improve GUI - hide show 5.11 5.12
* Jz 5.11 in iplocallab - step 1
* Compatibility 5.11 iplocallab cam16 step 1
* Improve GUI hide show 511 512
* Solved - I hope - GUI problem with tone mapper Q and J 5.11 and 5.12
* Compatibility 5.11 iplocallab Cam16 step 2
* Improve GUI compatibility 5.11 labels tooltips
* Small improvments GUI - labels - history...
* Fixed typo in paramsedited.cc clcurve issue 7283
* Change tooltips method 5.12 - 5.11 for cam16 and Jz brightness Q or J
* Clean and refine code
* Various change dafult language and CAM16 CAM02 replace by Cam16 Cam02
* Change modeQJ method for 5.11 in function ppversion
* Change labels as suggested by Wayne PR 7111
* Others changes suggested for label
* Change tooltips as suggested in PR
* Use unique pointer instead of manual management
* Update rtdata/languages/default
Co-authored-by: Lawrence37 <45837045+Lawrence37@users.noreply.github.com>
* Change all Cam16 references to CAM16
* Change convention uppercase and lowercase in frame - checkbox
* Improve tooltips for Tone Mapping Operators
* Another change CIECAM and uppercase lowercase in checkbox
* Remove appimage and windows yml
---------
Co-authored-by: Lawrence Lee <45837045+Lawrence37@users.noreply.github.com>
* Use target_include_directories to specify include paths
* Specify project root (parent of rtgui and rtengine) as include path
* Replace relative includes with normal includes
* Disable Laplace when others Spot with dehaze
* Disable Laplace when others Spot with dehaze
* appimage and widows yml with drexpos
* Compatibility 5.10 contrast attenuator
* Change control out of boud when using Contrast attenuator
* Comment code
* Comment code
* Comment code and fixed
* Clip original retinex to avoid crash in some cases
* Change tooltip
* Clip only Lapalacian if expose or soft enabled
* Various improvment to avoid crash
* Tonecurve hsv colortoning chmixer not allow negative RGB
* Fattal and black need clip issue 7151
* Disable Fattal
* Clean code
* Disable appimage and windows yml
* First step LA globally
* fixed several GUI bad behavior
* better behavior shows additional settings
* Improve transition in main
* First step hide-show invers and scope
* Hide show invers and scope step2
* hide show others inverse and scope
* Try to improve
* Change windows.yml and appimage.yml
* In Preference set choice for default Spot Method
* Optimization call idle_register
* forgotten delete mainfp
* Re-enable sliders scope in colorlight - shadows - vibrance - move setting checkbox others settings
* Fixed bad behavior hide - show
* Optimize behavior
* Bad behavior scope when changing method
* Clean and comment code
* disable preview mask and modif for cbdl and retinex
* Fixed preview deltaE mask and modif log encode - exposure - new button preview color and light
* Button preview deltaE - exposure
* Button preview SH
* Button preview Vibrance
* Improce code using mask
* Fixed several bad behavior - preview TM and Contrast
* Preview log button
* Preview Ciecam button
* Preview common mask button
* Disable Preview button in settings when not used in tools
* Change call to controspotpanel in improcoordinator
* Change Local adjustments title to Selective Editing
* Change default value spotmethod in option
* Missing cddl in preview settings
* Change parameter setting spot type
* put selective editing tab just after exposure tab
* Disable preview ΔE button when another is enabled
Only one button should be active at any given time.
* Deactivate preview ΔE buttons when switching spots
* Change tooltip Spot method
* Change selective editing position
* Remove duplicate line in language default
* Remove appimage.yml windows.yml
---------
Co-authored-by: Lawrence Lee <45837045+Lawrence37@users.noreply.github.com>
* Change management viewing temperature and tint
* Enable autotemp wbcamchanged and hide history message
* Change wbcamchnaged as proposed by kaesa
* First step levels
* Levels with luminosity mode
* History messages
* Clean and comment code
* Gamutmap xyz levels values
* Change range slope R G B
* Change range slope R G B
* Harmonize case Slope and Levels
* Harmonize case Slope and Levels 2
* Check Scale Yb viewing
* Small change
* Checbox black and white in source data adjustments
* Change tooltip avoid color shift issue 7066
* modify appimage.yml and windows.yml
* Fixed bad primaries space in free
* Fixed bwcie only in advanced mode
* Avoidgamumethod set to Munsell-only
* Set appimage.yml and windows.yml to la_gamutmunsell
* Remove procparams conversion XYZ absolute tu Munsell only
* Neutralize appimage.yml and windows.yml
* Improve Dynamic Range Compression - for some images with very high DR
* Clean code
* Improve TM fattal with saturation control in LA
* Saturation control fattal in LA
* Re-order paramsedit
* Change history_msg_tmo_satur with saturation
* Speed up preview when inpaint opposed enabled
Only reprocess from raw if the white balance is changed. Otherwise, a
cache from later in the pipeline can be used.
* Remove unused code
* Fix refresh map bit positions
* Make WB & inpaint opposed refresh less brittle
Co-authored-by: Hombre57 <natureh.510@gmail.com>
---------
Co-authored-by: Hombre57 <natureh.510@gmail.com>
* Init improvment LA denoise
* First display luma chroma residual noise
* Clean code denoise iplocallab.cc
* Change windows.yml with old version january 2023
* Clean code - change calculation denoise - GUI
* Improve labels tooltip denoise
* Clean code
* Change tooltip
* Set auto denoise - main - chroma auto to 50% when LA denoise is used
* Change GUI denoise with expanders
* Change labels
* Change reference remianing noise in percentage
* Change tooltip and labels
* Change values in preview remaining noise
* Clean comment code - chnage tooltips
* Change windows.yml and appimage.yml publish_pre_dev labels
* Update windows.yml
* Restore windows.yml
* Restore windows.yml and clean code
* Revert change Noise Reduction link with Local denoise
* Revert all changes on Noise-reduction linked with Local adjustments
* Change Preferences for observer whitebalance
* Change label white balance preferences
* Added Preferences 2 parameters Whitebalance auto correlation
* Add Preference Temperature correlation - sort and tooltip
* Change to rtengine cmakelist
* Apply patch from Lawrence37
* Small comment code
* Change defaut order prefrences wba
* Added force extra algoritm to Preferences
* Harmonize itcwb sorted
* Add fields to Preferences Itcwb
* Change settings precision Itcwb in Preferences
* Change tooltip Itcwb preferences
* First stage Itwcwb settings in main with pp3 and selction in preferences
* Second stage Itwcwb settings in main with pp3 and selction in preferences
* Third stage Itwcwb settings in main with pp3 and selction in preferences
* Add itcwb_fgreen student - green optimize
* Add Itcwb green range
* Itcwb history msg - first tooltips
* Remove force-extra because always used
* reused force-extra to use entire CIExy for sampling datas
* Removed inwanted text in console
* Set sensitive for Itcwbframe
* Various change - comment ..
* Small code review - chnage tooltips
* Remove settings itcwb_delta in Rawimagesource.cc to simplify
* Remove Itcwb Observer - put a single observer for everything - general - itcwb
* Fixed conflicts in colortemp.cc
* Various change - fixed bug - simplify
* Fixed limits for settings pp3 - chnage tooltip
* Clean unused code
* Put itcwb_findgreen in GUI
* Added checkbox 'Low sampling' to find the settings of 5.9
* Set Observer to Observer 10° - preferences default
* Missing setting Low sampling
* Show white balance multipliers
* Change default settings - Itcwb_sorted
* Move observer from preferences to WB
* Make observer selectable for camera WB
* Ensure observer checkbox is in sync with PP3
* Set default ITCWB low sampling for PP3s from <=5.9
Ensure temperature correlation white balance algorithm 1 is used when
opening edits from versions 5.9 and earlier.
* Removed unused White-balance frame in Preferences
* Comment some GUI sliders checkbox
* Removed all GUI itcwb in preferences and whitebalance
* Removed forgotten code in preferences
* Remove labels tooltips history Itcwb
---------
Co-authored-by: Lawrence Lee <45837045+Lawrence37@users.noreply.github.com>
* Essai HL
* Try Inpaint opposed
* Code improvment
* Add file
* Improvment to process inpaint opposed and color propagation
* Clean code
* Change Blend to Coloropp in Profile pp3
* Enable BENCHFUN hilite_recon
* Clean rtengine cmakelist
* Comment unused code
* Neutralise unused code
* Change bad Exposure in Pop2Lab.pp3
* Try to fix bug when Inpaint Opposed is used and White balance disabled
* Changes to refreshmap
* Change to improccoordinator M_RETINEX
* Clean unused commented code
* Force Inpaint-opposed in rawimagesouce if wb change
* Suppressed message in console
* Change events and limits to 1 the number of calls to inpaint-opposed
* Comment code
* Add gain theshold to inpaint opposed
* fixed typo in procparams.cc
* Change in option.cc itcwb_sort to true
* Change itcw sorted in options and rawimagesource.cc
* Change sampling read datas Itcwb
* Allow or not purple in WB itcwb
* Added option icwb.nopurple to bypass settings
* Added code comment Itcwb
* optimize Itcwb between green and student
* Formated code used by Itcwb with Astylert.bat
* Change color_match - thanks to Lawrence37
* Remove wrong text
* Fixed numerous problems with gamut and Munsell in Local adjustments
* change gamut-munsell in lab adjustmnts - gamut in ciecam
* Improve XYZ colorimetry and tooltip
* Change event - format code - change labels tooltips
* Removed avoid_ and avoidmun_
* Removed avoidcolorshift in labcurve
* Push change proposed by Lawrence37 - compatibility with old pp3
Merge with local adjustments tone equalizer image processing function
for consistent results.
To-do: Enable for batch editing and add pivot/colormap to the local
adjustments version.
