* Change management viewing temperature and tint
* Enable autotemp wbcamchanged and hide history message
* Change wbcamchnaged as proposed by kaesa
* First step levels
* Levels with luminosity mode
* History messages
* Clean and comment code
* Gamutmap xyz levels values
* Change range slope R G B
* Change range slope R G B
* Harmonize case Slope and Levels
* Harmonize case Slope and Levels 2
* Check Scale Yb viewing
* Small change
* Checbox black and white in source data adjustments
* Change tooltip avoid color shift issue 7066
* modify appimage.yml and windows.yml
* Fixed bad primaries space in free
* Fixed bwcie only in advanced mode
* Improve Dynamic Range Compression - for some images with very high DR
* Clean code
* Improve TM fattal with saturation control in LA
* Saturation control fattal in LA
* Re-order paramsedit
* Change history_msg_tmo_satur with saturation
---------
Co-authored-by: U-PCSPECIALIST01\jdesm <jdesmis@gmail.com>
* Improve Dynamic Range Compression - for some images with very high DR
* Clean code
* Improve TM fattal with saturation control in LA
* Saturation control fattal in LA
* Re-order paramsedit
* Change history_msg_tmo_satur with saturation
* Change estimchrom estim hue final
* Itcw observer checkbox
* 8 spectral colors
* 11 spectral colors
* 6 spectral colors
* Small change to correction green
* Fixed various bad behavior - settings itcwb_deltaspec
* 4 spectral colors green
* 3 green spectral colors
* 3 spectral colors green
* 5 spectral colors red green
* 3 spectral colors red green
* 3 spectral colrs green red
* Chnage slider choice deltaE - to size color patch
* display more info in console
* Display more info in console - comment code
* Clean - comment code
* 8 spectral colors green red
* 8 spectral colors blue
* 8 spectral colors blue
* 3 spectral colors
* 6 spectral colors
* 4 spectal colors
* 2 spectral colors
* Eliminate high Y - increse temp iteration - recenter selection inside patch
* compatibility 5.9
* Modify dislay and place selected dats in patch
* Dispaly in console hue chroma image selection
* First optimization
* optimization code - clean unused variables
* Remove sorted in chroma order - some others changes
* 5.9 compatibility
* Clean and optimize code
* Clean code - more display info in console
* More info in console - set itcwb_minsize in option
* Display patch chroma in GUI
* Change some default settings
* Minsize patch GUI
* Display GUI patch size
* Chroma patch variations
* Display in GUI min and max dats found in patch
* Some adjustments
* Remove too low datas in patch
* Various improvment - ponderate
* Clean code colortemp comment spectral datas
* Comment code - correc gren
* Comment and refine code
* Fixed bug in improcoordinator
* fixes a malfunction of AWB bias in improcoordinator
* Various improvments - clean code
* 2 improvments green and find patch
* Allows parametrind ponder and Ypurple in options
* Update autowb - filter on magenta purple
* Clean and optimize code
* Read colors in GUI
* Denoise median 5x5 image datas before Itcwb
* Change to GUI
* Replace median5x5 by 2 median3x3 - clean GUI code
* Work around to recalculate wbauto
* Remove work around - change params->wb related change
* Disabled low_sampling 5.9
* First try for compatibility Low sampling 5.9
* Re-enable WB autogrey
* Change reference image to autogrey if camera settings probably out
* Clean code aand adjust settings camera out
* Format astylert rawimagesource.cc - various small adjustments
* Small correction
* Small green correction
* Change default settings - correction to autowb bias in improccoordinator
* Save provisory work
* Save provisory work 2
* Try to find good tempitc with iterate when temptitc very different 5000K
* Change 2 default settings
* Work around awb temp bias
* Limit work around bias - small other changes
* 3 spectral colors deep blue
* 4 spectral color deep blue
* 4 color spectral yellow
* 5 spectral colors neutral red-magenta
* 5 spectral color neutral red magenta
* Change threshold tempitc
* 5.9 compatibility
* Work around bad claculation Planck's formula
* Fixed bad behavior when using blackbody spectal
* 6 spectral color - checkbutton remove 2 passes
* Fixed various bugs
* Format rawimagesource.cc
* Various improvment before to find the good selection
* First new optimization (perhaps?)
* Display GUI patc deltaE
* Various optimzation and tooltip
* Default observer 2°- Simplify GUI - improve display GUI - remove too low numbers datas
* 4 spectral colors - change 2 settings
* Change calculation threshold 2 passes
* 6 spectral colors magenta
* 13 spectral colors
* Improvment GUI display
* remove checkbutton no_purple
* 2 spectral colors - remove in GUI low sampling 5.9
* Change default setting display in console
* Change behavior when temp near stdA
* 4 spectral colors - settings Itcwb_tempstdA
* Gamut control on image histogram
* Clean code and format rawimagesource.cc
* Comment and format colortemp.cc
* Remove unused fileds from GUI - change tooltips
* Add tooltips
* Various changes
* Change settings when camera temperature is out
* improvment extra and tooltip
* Small change when using auto grey as start reference
* Remove itcwb_fgreen from GUI
* Various change - and 'unsatisfactory' test to take into account Custom
* Change second temp when < 4000 - replace automatic by automatic and refinement
* Neutralize 'Use custom tempertaure and green'
* Green refinement
* Clean code - small changes
* Other clean code
* Added forgotten itcw_green in procparams.cc
* Fixed a bug dispaly deltaE
* Change threshold settings - change code for Custom
* various change in case of using camera settings
* Change way to estimate range green
* clean code and message in console
* Clean and optimize
* Disable 2 passes if custom
* Improve GUI 2 passes
* Increase sampling and number of temperature above 9400K
* Hide AWB temperature bais and green refinement when Custom temerature ans green
* marks out the code with past time markers
* Improve time processing with spectral colors temp calculations
* Replace in console msec by nsec
* Scan temp 5.9
* Change max temp and behavior if temp > 15000k
* Refine temp near 14000K
* Increase sampling temperature 132 to 167
* Increase sampling temperature
* Set in preference choice for itcwb_custom
* White point calculated with observer instead of table
* More on whitepoint calculation - informations
* Clean and format code with astyle colortemp.cc rawimagesource.cc improccoordinator.cc
* Small change tooltip
* Improve update auto-wb
* Remove 'use custom temperature and tin' - simplify sampling to 2 choice
* Small change to rand AWB bias - green refinement - tooltips
* slightly modify the parameters upstream of the algo - do not use camera in some cases
* Mixed initial green
* Refine init green and temp when no camera
* Refine temp and green in do not use camera settings
* Change tint threshold and various improvments (tooltips, wrong values..)
* Refinment and clean code
* Improve mode No use camera settings
* Init nocam
* Refine use no camera settings
* Small change
* 5.9 compatibility - and format
* Refine sampling temperature around 7000 - 8000K
* Format astylert rawimagesource colortemp
* 5.9 settings
* 5.9 settings 2
* Various change - 5.9 - format
* Improve pre and post algorithm
* Fixed correction temp > 8000K
* Fixed bad behavior Tppat.minchroma
* Change sampling choices and tooltip
* Change name wp wp2 wip to wb wb2 iwb to avoid misunderstood
* Small Change settings - limit display studgood to 0.0001
* Improvment display GUI temp
* Change default sampling
* Change ACESP0 to JDCmax
* Improve GUI abstract profile
* Allows dispaly in console xy values thanks to Reffort
* Remove bruce rgb in wp and abstract
* Change wp abstract and save itcwb with dispaly cellxy
* Change prim = 13 improccoordinator iplab2rgb
* remove display datas in console - fixed wrong display Y xyY
* Fixed ifferences in GUI maxhist minhist
* Change limits x y in function sampling
* fixed a dizziness
* Change after algorithm rule when temp > 6000K
* Harmonize limx limy for oldsampling 5.9
* Added Cam xyz matrix to sampling - thanks to Reffort
* Display in console xyz matrix
* Forgotten instruction when mix camera and autowb grey
* Change rgbloc with Camera matrix Dcraw when no input profile
* Change rep to repref in rgbxyz
* Remove message in console
* 5.9 compat
* 5.9 compat 2
* 5.9 compat 3
* 5.9 compat 4
* 5.9 compat 5 format
* 5.9 compta 6
* Improve code
* Diasble itcwb_sampling in GUI
* Comment code
* Clean and comment code
* 5 spectral colors
* 9 spectral colors
* 2 spectral colors
* Various improvments
* 5 spectral colors
* 5 spectral colors
* First changes review lawrence37
* Second changes review Lawrence37
* 3rd changes review Lawrence37
* 4th changes review Lawrence37
* Change windows and appimage yml
* Re-enable Rtv4_Bruce in procparams.cc
* test for 5.9 compatibility
* Try to fixed crash
* Slightly improve the management of 5.9
* test for 5.9 compatibility by passing parameters via the GUI
* Forgotten parameter
* Change ref_spec limit and remove pac_start for itcwb_sampling
* Puts back the old Planck formula - the same as in dev
* Revert "test for 5.9 compatibility by passing parameters via the GUI"
This reverts commit d6b5a8feda31b93a5574cee6ebf4d3e9d58bbcfb.
* Switch to new ITCWB only when changing WB method
Prevents sudden changing of the white balance if ITCWB is selected and
the image is reopened.
* Fix spelling in comment
* Suggested change from Lawrence37 to whitebalance - small change to improcoordinator
* tempbias Set_sentive(false) if itcwb_smapling - clean whitebalance
* Another clean whitebalance.cc
---------
Co-authored-by: Lawrence Lee <45837045+Lawrence37@users.noreply.github.com>
* Init improvment LA denoise
* First display luma chroma residual noise
* Clean code denoise iplocallab.cc
* Change windows.yml with old version january 2023
* Clean code - change calculation denoise - GUI
* Improve labels tooltip denoise
* Clean code
* Change tooltip
* Set auto denoise - main - chroma auto to 50% when LA denoise is used
* Change GUI denoise with expanders
* Change labels
* Change reference remianing noise in percentage
* Change tooltip and labels
* Change values in preview remaining noise
* Clean comment code - chnage tooltips
* Change windows.yml and appimage.yml publish_pre_dev labels
* Update windows.yml
* Restore windows.yml
* Restore windows.yml and clean code
* Revert change Noise Reduction link with Local denoise
* Revert all changes on Noise-reduction linked with Local adjustments
Use LCMS to convert values back into L*a*b*. The pipette buffer has the
output or working profile applied with LCMS. Performing the inverse
operation fixes the incorrect values shown in the navigator, histogram
indicator bars, and lockable color pickers.
* Fixed numerous problems with gamut and Munsell in Local adjustments
* change gamut-munsell in lab adjustmnts - gamut in ciecam
* Improve XYZ colorimetry and tooltip
* Change event - format code - change labels tooltips
* Removed avoid_ and avoidmun_
* Removed avoidcolorshift in labcurve
* Push change proposed by Lawrence37 - compatibility with old pp3
Merge with local adjustments tone equalizer image processing function
for consistent results.
To-do: Enable for batch editing and add pivot/colormap to the local
adjustments version.
* Gui improvments
* Several improvments GUI Jz algo
* Change function La for lightess Jz
* SH jzazbz first
* enable Jz SH
* Clean code
* Disabled Munsell correction when Jz
* Change tooltip and Cam16 Munsell
* GUI for CzHz and HzHz curves
* Enable curves Hz(Hz) Cz(Hz)
* Improve Cz chroma
* Jz100 reference refine
* Change limit Jz100
* Refine link between jz100 and peak adaptation
* Improve GUI
* Various improvment PQ PU gamut
* Change defaults settings
* forgotten PL in gamutjz
* Small changes and comment
* Change gamujz parameter
* disabled gamut Jz too slow
* Jzazbz curve Jz(Hz)
* reenable gamutjz
* small changes
* Change tooltip
* Change labels tooltips
* Jzazbz only on advanced mode
* GUI improvments
* Change tooltip
* Change default values and tooltip
* Added tooltip Jz
* Disabled Jz gamut
* Change gamma color and light - remove exposure
* Gamma for exposure and DR
* gamma Sharp
* Gamma vibrance
* gamma optimizations
* Change tooltips
* Optimization PQ
* LA GUI for tone curve Ciecam
* LA ciecam Enable curve lightness - brightness
* LA ciecam GUI color curve
* LA ciecam enable color curve
* Change tooltip and default values
* Enable Jz curve
* Enable Cz(Cz) curve
* Enable Cz(Jz) curve
* Added Log encoding to ciecam
* Improvment algorithm remapping
* Reenable forgotten listener logencodchanged
* Change Jz tooltips
* Reenable dynamic range and exposure
* First change GUI auto ciecam
* 2nd fixed ciecam auto
* Improve GUI maskbackground curves
* Enable activspot for la ciecam
* set sensitive sliders La ciecam when auto scene conditions
* Change internal calculations see comments
* Checcbox ForceJz to 1
* Change tool position - change order CAM model
* Expander for Jzczhz
* Remove unused code
* GUI changes
* Change labels CAM16 Jzazbz
* Change slider brightness parameters
* improvment SH jz
* Some changes to brightness Jz
* Fixed scene conditions auto
* Renable forgotten change
* Prepare calculation Zcam
* Prepare Iz for zcam
* First GUI Zcam
* Improve GUI Zcam
* Calculate Qz white - brightness of the reference white
* Prepare for PQ - eventually
* Init LUT ZCAMBrightCurveJz and ZCAMBrightCurveQz
* prepare zcam achromatic variables
* First zcam
* Change algo step 5 zcam
* Another change original algo
* Another change to original algo
* first colorfullness
* Fixed bad behavior threshold and change c c2 surround parameters
* added saturation Zcam
* Change parameters surround
* Enable chroma zcam
* change chroma and lightness formula
* disable OMP for 2nd process Zcam
* Improvment zcam for some high-light images
* Change parameters overflow zcam
* Change parmeters high datas
* another change to retrieve...
* Simplify code matrix conversion xyz-jzazbz
* Adjust internam parameters zcam
* Change some parameters - clean code
* Enable PQCam16
* Enable PQ Cam16 - disable ZCAM
* remove warning compilation message
* Change GUI jzczhz
* Fixed bad behavior remaping jz
* Remove forgotten parameter - hide Jz100 - PU adaptation- chnage tooltips
* Another change to chroma parameter
* Small changes
* If verbose display in console Cam16 informations
* If verbose display in console source saturation colorfullness
* Change to La calculation for ciecam
* Change GUI cam16 - jzczhz - remove cam16 and jzczhz
* Disable exposure compensation to calculate La for all Ciecam and Log encoding
* Change label Cam16 and jzczhz
* Improve GUI Jz
* Other improvment GUI Jz Cam16
* verify nan Jz and ciecam matrix to avoid crash
* Enable La manual for Jz to change PU-adaptation
* Improve calculation to avoid crash Jz and Cam16 matrix
* Fixed crash with local contrast in cam16
* Clean code loccont
* First step GUI Cie mask
* GUI part 2 - Cie
* Build cieMask
* Gui part 3 cie
* Valid llcieMask
* Valid llcieMask
* Pass GUI curves parameters to iplocallab.cc
* 2nd pass parameters from GUI to iplocallab.cc
* Init first functions modifications
* Add expander to cam16 adjustments
* First test mask cie
* Various improvment GUI - tooltips - process
* Take into account Yb cam16 for Jz - reenable warm-cool
* Surround source Cam16 before Jz
* Improve GUI and process
* Fixed bug and bad behavior last commit
* Fixed bug chroma mask - improve GUI - Relative luminance for Jz
* Increase sensitivity mask chroma
* Improve Jz with saturation Z - improve GUI Jzczhz
* Small code improvment
* Another change mask C and enable mask for Cam16 and Jz
* Some changes
* Enable denoise chroma mask
* Small change LIM01 normchromar
* Enable Zcam matrix
* Improve chroma curves...mask and boudaries
* take into account recursive slider in settings
* Change tooltip - improvment to C curve (denoise C - best value in curves - etc.) - remove Zcam button
* Change tooltips
* First part GUI - local contrast wavelet Jz
* Passed parameters GUI local contrast wav jz to rtengine
* save config wavelet jz
* first try wavelet local contrast Jz
* Add tooltips
* Simplify code wavelet local contrast
* take into account edge wavelet performance in Wavelet Jz
* Fixed overflow jz when usig botth contradt and wavelt local jz contrast
* Adapt size winGdiHandles in filepanel to avoid crash in Windows multieditor
* First GUI part Clarity wavelet Jz
* First try wavelet Jz Cz clarity
* Added tooltips
* Small change to enable wavelet jz
* Disabled (commented) all Zcam code
* Improve behavior when SH local-contrast and Clarity are use both
* Change limit PQremap jz
* Clean and optimize code
* Reenable mjjz
* Change settings guidedfilter wavelet Jz
* Fixed crash when revory based on lum mask negative
* Change tooltip
* Fixed ad behavior auto mean and absolute luminance
* Remove warning in console
* Fixed bad behavior auto Log encoding - bad behavior curves L(H) Jz
* Fixed another bad behavior - reenable curves color and light L(H) C(H)
* first transposition Lab Jz for curves H
* Change mask boundary for Jz
* Various improvment to H curves Jz
* Add amountchrom to Hcurve Color and Light
* Improve gray boundary curves behavior
* reenable Jz curve H(H) - soft radius
* Improve guidefilter Jz H curve
* Threshold chroma Jz(Hz)
* Enable guidedfilter chroma curve H
* improve GUI curves Hz
* Checkbutton chroma for curve Jz(Hz)
* Change event selectspot
* Clean and small optimization code
* Another clean code
* Change calculation Hz references for curves Hz
* Clean code
* Various changes to GF and GUI
* Another change to Chroma for Jz(H)
* Change GUI sensitive Jz100 adapdjzcie
* Improve code for Jz100
* Change default value skin-protection to 0 instead of 50
* Clean code
* Remove BENCHFUN for ciecam
* small correction to huejz_to_huehsv2 conversion
* Added missing plum parameter for jch2xyz_ciecam02float
* another small change to huejz_to_huehsv2
* Improvment to huelab_to_huehsv2 and some double functions
* Fixed warning hide parameters in lgtm-com
* Fixed ? Missing retuen statement in lgtm-com
* Change behavior Log encoding whith PQ Cam16
* Small improvment to Jz PU adaptation
* Added forgoten to_one for Cz slider
* Replace 0.707... by RT_SQRT1_2 - change some settings chroma
* Improvment to getAutoLogloc
* Fixed crash with array in getAutoLogloc
* First try Jz Log encoding
* Forgotten Cz
* Various improvment GUI setlogscale - Jz log encoding
* Change labels tooltips Jz log
* Change wrong clipcz value
* Change tooltip auto scene conditions
* Fixed bad behavior blackevjz whiteevjz
* Small improvment to LA Log encoding std
* Avoid bad behavior Jz log when enable Relative luminance
* Change sourcegray jz calculation
* Revert last change
* Clean and comment code
* Review tooltips thanks to Wayne - harmonize response La log encoding and Jz Log encoding
* Always force Dynamic Range evaluation in full frame mode for Jz log encoding
* Remove unused code
* Small optimizations sigmoid Cam16 and Jz
* Comment code
* Change parameters deltaE for HDR
* Various improvment to Jz - La - sigmoid - log encoding
* Basic support for Sony ILCE-7M4 in camconst.json
* German translation Spot Removal (#6388)
* Filmnegative German translation (#6389)
* (Temporarily) disable `ftree-loop-vectorize` for GCC 11 because of #6384
* Added BlacEv WhiteEv to sigmoidJz
* Improve GUI for BlackEv WhiteEv
* Change location SigmoidJz in Iplocallab
* Improvment GUI and sensitivity sliders strength sigmoid
* Change labels
Co-authored-by: Thanatomanic <6567747+Thanatomanic@users.noreply.github.com>
Co-authored-by: Anna <simonanna@gmx.net>
* Change TRC in the process
* Improve GUI slope
* Add tooltip output profile
* Various change to enable and tooltip
* Chnage rtthumbnail
* Small change tooltip trc
* Another small change tooltip
* Improve GUI - change default TRC BT709 - change tooltip
* Other GUI improvment
* Small changes to BT709 values
* Various change to TRC - add illuminant working profile
* Change labels tooltip TRC illuminant
* Display wp in console if wp provided
* Change tooltip
* Change max wlope
* Init trc + illum + primaries
* Add black point compensation
* Change location abstract
* Fixed bug with rtthumbnail...
* Added tooltip
* Logscale for wslope
* Change tooltip abstract
* Change labels tooltips abstract profile
* Added 6 sliders custom primaries X and Y
* Change GUI custom primaries
* Use custom primaries abstract profiles
* Tooltip with primaries red green blue
* Fixed warning gtk
* Change one tooltip
* Change range custom primaries
* Change GUI default Primaries
* Change one tooltip
* Speedup for trc
* Rendering intent for abstract profile
* Hide intent abstract
* Preserve neutral tones
* Chnage settings preserves neutral tones
* Improve GUI
* Improvment to preserv
* Clean code - speedup TRC when illuminant and primaries default
* Change label
* Change bad default value Blux
* Add forgoten illuminant when selecting primaries
* clean code
* Change labels
* improve workingtrc for LA
* Change default primaries when select default
* Added others working profile to primaries
* Change labels and GUI
* Change tooltip
* CIExy diagram displaying the primaries (interactive) and the white point (#6207)
* Ciexy diagram
* Change to Ciexy graph
* Change graph and defaut coordonates
* Various changes to graph - params
* Disable setListener(ToolPanelListener)
* Add some graduation to graph
* Clean comment code graph
* Change radius 0
* Enable sensitive graph Ciexy
* update Ciexy graph with primaries
* Remove reset button graph
* Change labels and behavior
* First step third spot green
* Second step 3rd spot green
* First try 3 primaries graph Ciexy
* Fixed bad behavior in lab grid
* Fixed another bad behavior graph
* Clean and comment code
* Change default gamma
* More accurate graph Cie xy
* Added white point to Ciexy graph
* Added tooltip Cie xy diagram
* Improvment when illuminant change
* Refine diagram CIE xy - added WP 2000K
* White point D120 + tooltip
* Change label
* Change labels
* Change tooltips
* Improve diagram CIE xy with parabolic
* Other parabolic to improve Cie xy diagram
* Small change GUI
* Added Label CIE xy - change labels
* Change behavior when none - change labels
* Improve gUI and trys to fix LGTM alerts
* CIE xy change set sensitive
* Improve tooltip primaries sliders
* Adapt tooltip to new labels
* Fixed crash and some bad behavior
* First fix bad behavior with some primaries
* Second fixed bad behavior primaries
* Third fixed bad behavior primaries
* Change white point BestRGB
* Change order rgb in history msg Ciexy
* Change tooltip
* Change tooltip
* Improve GUI primaries
* Illuminant 1500K - display in console matrix XYZ-RGB
* Improve GUI illuminant
* Change a tooltip
* Somme changes to GUI and verbose
* Test code for wprim in read
* clean code for wprims
* further cleanups, not tested
* Some cleanups and bugfixes, #5949
* Simplify `std::unique_ptr<>` dereferencing
Also some minor cleanups.
* Some changes suggested by Floessie
* Others change suggested
* Others changes suggested by Floessie
* Forgotten change in procparams.cc
* Added black and white for use with the primaries channel mixer
* Small change behavior GUI - illuminant
* Change pragma omp in iplab2rgb
* Add enums and clean up
* Remove unused code icmpanel.cc
* Fix LGTM alert, #5949
Co-authored-by: Ingo Weyrich <heckflosse67@gmx.de>
Co-authored-by: Flössie <floessie.mail@gmail.com>
* Enable dynamic range - settings normalize luminance
* Change range DR sigma offset
* improve normalize_mean_dt with mean std before
* Save work on normalize dynamic range
* Improve normalize for TM
* Added LA retinex to normalize_mean
* Clean and optimize code
* Disabled normalize DR - improve TM and Retinex
* Clean code - first part
* Clean code - part two
* Change 2 default values Retinex
* Change order TM and Retinex in process
* remove the order number in - add tool to current spot -
* Fixed bug in TM
* Some change Retinex - default...
* optimize mean sigma
* cleanup for mean_sig
* Fix some cppcheck issues
* convert one large loop into three loops to avoid performance penalty on machines with 4-way L1 cache
Co-authored-by: Ingo Weyrich <heckflosse67@gmx.de>
* Added Guidedfilter to avoid color shift
* Various improvment to avoid color shift
* Small change to mint maxt
* local adjustments avoid color shift: reduce memory usage by width * height * 8 byte if Soft Radius > 0
* Remove StopWatch
* local adjustments avoid color shift: speedup for last loop
* cleanups
* one more cleanup
* Added checkbox Munsell correction only - uniform perceptual lab
* Refine some settings
* Clean-up - other small refinement
Co-authored-by: Ingo Weyrich <heckflosse67@gmx.de>
* Added support for non-raw files to the film negative tool. The tool is now under the "Color" tab. Moved the entire filmneg code downstream, right after input profile conversion.
Usage changes a bit: White Balance must be set to the _backlight_ color temperature. Added two more sliders to color-balance the picture after negative inversion. Legacy inversion method kept for compatibility with processing profiles saved by RT v5.7 or 5.8 (only if Film Negative was enabled). Should be removed in a future version.
There is still an issue with DCP profiles that need the look table to be active to work properly. Using a simple matrix input profile (or just camera standard) is recommended for now.
* The user can now choose to perform inversion before or after input colorspace conversion.
Seamless backwards compatibility with previous processing profiles; upgrading from a previous version now gives an (almost) identical output as before.
Generalised the concept of film base values: the processing profile now contains a pair of RGB triplets, "reference input" and "reference output", which makes it much more straightforward to compute the output multipliers.
* Added support for `RGB` data type to putToKeyFile, removed the now unused `RGB::toVector()` method. Some cleanup.
* Spot balance picker now stays active indefinitely. Can be disabled by right-clicking, too.
* Removed film negative from `filterRawRefresh` condition, since the new version does not require raw rendering anymore.
* The Output Level slider is now exponential, so it should feel more familiar to use (similar to the exposure compensation slider).
* Removed old `RedBase`, `GreenBase`, `BlueBase` keys from the PP3 file after params upgrade. Keys are only kept if the file only undergoes batch edit (hence no params upgrade was done).
* Made the balance sliders exponential and centered at zero. Now they should be a bit smoother and possibly more user-friendly.
* Changed adjusters' step to more useful values, they were too fine-grained and hard to adjust using the +/- spinbutton.
Increased max ratio value from 3 to 5, as i found an old negative needing a very high blue channel exponent.
* Added an initial processing profile for film negative inversion, to be provided as a bundled profile.
* Removed Output Level and balance sliders when in batch mode: since the effect of these sliders is dependent on the reference input values, those values needed to be copied as well. And, touching any of the sliders needed to flag all three as dirty. All this felt more confusing than useful.
It should be sufficient (and clearer) to copy/paste the params, and then fine-tune the balance on individual pictures when needed.
* Set bayer demosaic method to RCD in the bundled "Film Negative" processing profile. RCD seems to play a bit better with Capture Sharpening in the presence of film grain, compared to Amaze.
This will favor new users starting with all-defaults settings, hence having Capture Sharpening enabled by default.
* Removed incorrect "contrast" term from the "Reference exponent" label. This parameter adjusts the image _gamma_, not its contrast.
* Fixed bug in inverse Blur chrominance - and general bad behavior Blur and noise
* Improve avoid color shift
* Another improvment to avoid color shift
* First LA log encoding ciecam
* Some changes hide show and tooltip
* Change label - tooltip
* Change max slider shadow
* Fixed bad behavior cat02 adaptation in some cases
* Another fix Cat02 GUI
* LA log encode add ciecam saturation
* LA log encoding - added contrast J ciecam
* LA Log encode various changes GUI labels tooltips
* Change 2 tooltips
* Clean code
* First wavelet denoise
* Gui for wavel denoise
* First version local contrast and denoise
* Second version local contrast and denoise
* second version GUI equalizer
* enable equalizer local contrast denoise 1234
* change local contrast curve defaut
* disable local contrast when curve 1
* denmethod in advanced - standard
* Simulate slider denoise with curve
* Some various chnages
* Chnage reference local contrast
* GUI part reference local contrast
* Enable reference noise mix denoise for local contrast denoise
* Improvment to reference local contrast denoise
* Display comment in console
* Best format string in console
* Change agressive denoise limit to 50 - added tooltip
* Added method quality denoise - change madL in ftblockdn
* Change equalizer 1234 settings - added high level local contrast
* added high levels local contrast curve
* Fixed sigma local contrast
* clean format code
* Some improvments
* normalize level slider high level threshold
* change ordonate curve high level contrast
* Fixed bad level for curve high levels - simplify GUI standard
* several changes - guidefilter final - new double slider threshold
* save provisory work
* save GUI work GF threshold
* save provisory work
* Fixed some bad behavior GUI
* save GUI Hue GF
* Curve Hue for GF
* OMP for hue GF
* addes noisevarhue and fixed some bug
* save GUI equalizer hue
* enable equalizer hue
* Fixed bad behavior GUI in advanced mode
* change some default values
* Others change default values
* Change in progressivity slider threshold local contrast
* simplifie algorithm and GUI
* Added tooltip and chnage some labels
* Change labels and tooltip wavelet denoise
* added level 5 denoise
* Change typo in label guided theshold
* Various changes labels tooltip
* Change minimum wavelet level
* Added level 5 to denoise
* Change slider sigm for a double slider sigm03 sigm45
* small delay for double slider sigm
* Fixed wrong values sigm
* Hide level56 in standard complexity
* Improve in standard complexity
* Various improvment levels 14
* interaction 56 14 - advanced complexity
* Mode simple to color and light
* Exposure complex
* Vibrance and SH complex
* Soft and Blur complex
* Common mask complex
* Sharp Retinex complex
* Localcontrast complex
* Change label tooltip complex
* Change labels and tooltip
* Change tooltip french
* Change default value scope TM
* Some forgotten hide..with basic in inverse mode
* Another hide in basic and inverse
* Change some type in labels
* Change typo contrast
* Refine some labels tootips
* Change after review Ingo - thanks
* Improve history behaviour when changing local adjustments complexity mode
* Added normal to original retinex - basic to dehaze
* Fixed bad behavior normal expert Color and Light
* Improve edge sharpness
* Another improvment edge sharpness
* various improvement
* locallab: speedup and reduced memory usage for wavcontrast4()
* remove file
* French labels complexity
* calckoe(): cleanup, speedup and bugfix for 3x3 gaussian kernels
* calckoe(): cleanup for 3x3 gaussian kernels
* calckoe(): fill koeli[] with zeroes if level <= 1 && tloww >= 75.f
* GUI part fixes and cleanup
* Fix in Locallab Settings panel
Additionnal minor fix in Preferences windows
* Change default mode complexity in preferences - basic
* Change complexity in option
* Improve gui when lauch first image
Co-authored-by: Ingo Weyrich <heckflosse67@gmx.de>
Co-authored-by: Pandagrapher <pierre.cab@gmail.com>
