rawTherapee/rtgui/locallab.h
Desmis 1e4f41bc05
LA - new tool - Color appearance (Cam16 & JzCzHz) (#6377)
* Gui improvments

* Several improvments GUI Jz algo

* Change function La for lightess Jz

* SH jzazbz first

* enable Jz SH

* Clean code

* Disabled Munsell correction when Jz

* Change tooltip and Cam16 Munsell

* GUI for CzHz and HzHz curves

* Enable curves Hz(Hz) Cz(Hz)

* Improve Cz chroma

* Jz100 reference refine

* Change limit Jz100

* Refine link between jz100 and peak adaptation

* Improve GUI

* Various improvment PQ PU gamut

* Change defaults settings

* forgotten PL in gamutjz

* Small changes and comment

* Change gamujz parameter

* disabled gamut Jz too slow

* Jzazbz curve Jz(Hz)

* reenable gamutjz

* small changes

* Change tooltip

* Change labels tooltips

* Jzazbz only on advanced mode

* GUI improvments

* Change tooltip

* Change default values and tooltip

* Added tooltip Jz

* Disabled Jz gamut

* Change gamma color and light - remove exposure

* Gamma for exposure and DR

* gamma Sharp

* Gamma vibrance

* gamma optimizations

* Change tooltips

* Optimization PQ

* LA GUI for tone curve Ciecam

* LA ciecam Enable curve lightness - brightness

* LA ciecam GUI color curve

* LA ciecam enable color curve

* Change tooltip and default values

* Enable Jz curve

* Enable Cz(Cz) curve

* Enable Cz(Jz) curve

* Added Log encoding to ciecam

* Improvment algorithm remapping

* Reenable forgotten listener logencodchanged

* Change Jz tooltips

* Reenable dynamic range and exposure

* First change GUI auto ciecam

* 2nd fixed ciecam auto

* Improve GUI maskbackground curves

* Enable activspot for la ciecam

* set sensitive sliders La ciecam when auto scene conditions

* Change internal calculations see comments

* Checcbox ForceJz to 1

* Change tool position - change order CAM model

* Expander for Jzczhz

* Remove unused code

* GUI changes

* Change labels CAM16 Jzazbz

* Change slider brightness parameters

* improvment SH jz

* Some changes to brightness Jz

* Fixed scene conditions auto

* Renable forgotten change

* Prepare calculation Zcam

* Prepare Iz for zcam

* First GUI Zcam

* Improve GUI Zcam

* Calculate Qz white - brightness of the reference white

* Prepare for PQ - eventually

* Init LUT ZCAMBrightCurveJz and ZCAMBrightCurveQz

* prepare zcam achromatic variables

* First zcam

* Change algo step 5 zcam

* Another change original algo

* Another change to original algo

* first colorfullness

* Fixed bad behavior threshold and change c c2 surround parameters

* added saturation Zcam

* Change parameters surround

* Enable chroma zcam

* change chroma and lightness formula

* disable OMP for 2nd process Zcam

* Improvment zcam for some high-light images

* Change parameters overflow zcam

* Change parmeters high datas

* another change to retrieve...

* Simplify code matrix conversion xyz-jzazbz

* Adjust internam parameters zcam

* Change some parameters - clean code

* Enable PQCam16

* Enable PQ Cam16 - disable ZCAM

* remove warning compilation message

* Change GUI jzczhz

* Fixed bad behavior remaping jz

* Remove forgotten parameter - hide Jz100 - PU adaptation- chnage tooltips

* Another change to chroma parameter

* Small changes

* If verbose display in console Cam16 informations

* If verbose display in console source saturation colorfullness

* Change to La calculation for ciecam

* Change GUI cam16 - jzczhz - remove cam16 and jzczhz

* Disable exposure compensation to calculate La for all Ciecam and Log encoding

* Change label Cam16 and jzczhz

* Improve GUI Jz

* Other improvment GUI Jz Cam16

* verify nan Jz and ciecam matrix to avoid crash

* Enable La manual for Jz to change PU-adaptation

* Improve calculation to avoid crash Jz and Cam16 matrix

* Fixed crash with local contrast in cam16

* Clean code loccont

* First step GUI Cie mask

* GUI part 2 - Cie

* Build cieMask

* Gui part 3 cie

* Valid llcieMask

* Valid llcieMask

* Pass GUI curves parameters to iplocallab.cc

* 2nd pass parameters from GUI to iplocallab.cc

* Init first functions modifications

* Add expander to cam16 adjustments

* First test mask cie

* Various improvment GUI - tooltips - process

* Take into account Yb cam16 for Jz - reenable warm-cool

* Surround source Cam16 before Jz

* Improve GUI and process

* Fixed bug and bad behavior last commit

* Fixed bug chroma mask - improve GUI - Relative luminance for Jz

* Increase sensitivity mask chroma

* Improve Jz with saturation Z - improve GUI Jzczhz

* Small code improvment

* Another change mask C and enable mask for Cam16 and Jz

* Some changes

* Enable denoise chroma mask

* Small change LIM01 normchromar

* Enable Zcam matrix

* Improve chroma curves...mask and boudaries

* take into account recursive slider in settings

* Change tooltip - improvment to C curve (denoise C - best value in curves - etc.) - remove Zcam button

* Change tooltips

* First part GUI - local contrast wavelet Jz

* Passed parameters GUI local contrast wav jz to rtengine

* save config wavelet jz

* first try wavelet local contrast Jz

* Add tooltips

* Simplify code wavelet local contrast

* take into account edge wavelet performance in Wavelet Jz

* Fixed overflow jz when usig botth contradt and wavelt local jz contrast

* Adapt size winGdiHandles in filepanel to avoid crash in Windows multieditor

* First GUI part Clarity wavelet Jz

* First try wavelet Jz Cz clarity

* Added tooltips

* Small change to enable wavelet jz

* Disabled (commented) all Zcam code

* Improve behavior when SH local-contrast and Clarity are use both

* Change limit PQremap jz

* Clean and optimize code

* Reenable mjjz

* Change settings guidedfilter wavelet Jz

* Fixed crash when revory based on lum mask negative

* Change tooltip

* Fixed ad behavior auto mean and absolute luminance

* Remove warning in console

* Fixed bad behavior auto Log encoding - bad behavior curves L(H) Jz

* Fixed another bad behavior - reenable curves color and light L(H) C(H)

* first transposition Lab Jz for curves H

* Change mask boundary for Jz

* Various improvment to H curves Jz

* Add amountchrom to Hcurve Color and Light

* Improve gray boundary curves behavior

* reenable Jz curve H(H) - soft radius

* Improve guidefilter Jz H curve

* Threshold chroma Jz(Hz)

* Enable guidedfilter chroma curve H

* improve GUI curves Hz

* Checkbutton chroma for curve Jz(Hz)

* Change event selectspot

* Clean and small optimization code

* Another clean code

* Change calculation Hz references for curves Hz

* Clean code

* Various changes to GF and GUI

* Another change to Chroma for Jz(H)

* Change GUI sensitive Jz100 adapdjzcie

* Improve code for Jz100

* Change default value skin-protection to 0 instead of 50

* Clean code

* Remove BENCHFUN for ciecam

* small correction to huejz_to_huehsv2 conversion

* Added missing plum parameter for jch2xyz_ciecam02float

* another small change to huejz_to_huehsv2

* Improvment to huelab_to_huehsv2 and some double functions

* Fixed warning hide parameters in lgtm-com

* Fixed ? Missing retuen statement in lgtm-com

* Change behavior Log encoding whith PQ Cam16

* Small improvment to Jz PU adaptation

* Added forgoten to_one for Cz slider

* Replace 0.707... by RT_SQRT1_2 - change some settings chroma

* Improvment to getAutoLogloc

* Fixed crash with array in getAutoLogloc

* First try Jz Log encoding

* Forgotten Cz

* Various improvment GUI setlogscale - Jz log encoding

* Change labels tooltips Jz log

* Change wrong clipcz value

* Change tooltip auto scene conditions

* Fixed bad behavior blackevjz whiteevjz

* Small improvment to LA Log encoding std

* Avoid bad behavior Jz log when enable Relative luminance

* Change sourcegray jz calculation

* Revert last change

* Clean and comment code

* Review tooltips thanks to Wayne - harmonize response La log encoding and Jz Log encoding

* Always force Dynamic Range evaluation in full frame mode for Jz log encoding

* Remove unused code

* Small optimizations sigmoid Cam16 and Jz

* Comment code

* Change parameters deltaE for HDR

* Various improvment to Jz - La - sigmoid - log encoding

* Basic support for Sony ILCE-7M4 in camconst.json

* German translation Spot Removal (#6388)

* Filmnegative German translation (#6389)

* (Temporarily) disable `ftree-loop-vectorize` for GCC 11 because of #6384

* Added BlacEv WhiteEv to sigmoidJz

* Improve GUI for BlackEv WhiteEv

* Change location SigmoidJz in Iplocallab

* Improvment GUI and sensitivity sliders strength sigmoid

* Change labels

Co-authored-by: Thanatomanic <6567747+Thanatomanic@users.noreply.github.com>
Co-authored-by: Anna <simonanna@gmx.net>
2021-12-21 07:43:59 +01:00

219 lines
6.2 KiB
C++

/*
* This file is part of RawTherapee.
*
* Copyright (c) 2004-2010 Gabor Horvath <hgabor@rawtherapee.com>
*
*
* RawTherapee is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* RawTherapee is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with RawTherapee. If not, see <http://www.gnu.org/licenses/>.
* 2017 Jacques Desmis <jdesmis@gmail.com>
* 2019 Pierre Cabrera <pierre.cab@gmail.com>
*/
#ifndef _LOCALLAB_H_
#define _LOCALLAB_H_
#pragma once
#include "controlspotpanel.h"
#include "locallabtools.h"
/* ==== LocallabToolListListener ==== */
class LocallabToolList;
class LocallabToolListListener
{
public:
LocallabToolListListener() {};
virtual ~LocallabToolListListener() {};
virtual void locallabToolToAdd(const Glib::ustring &toolname) = 0;
};
/* ==== LocallabToolList ==== */
class LocallabToolList:
public Gtk::Box
{
private:
// Tree model to manage ComboBox rows
class ToolRow:
public Gtk::TreeModel::ColumnRecord
{
public:
Gtk::TreeModelColumn<int> id;
Gtk::TreeModelColumn<Glib::ustring> name;
ToolRow()
{
add(id);
add(name);
}
};
// Tool list GUI widgets
MyComboBox* const list;
sigc::connection listConn;
ToolRow toolRow;
Glib::RefPtr<Gtk::ListStore> listTreeModel;
// Tool list listener
LocallabToolListListener* listListener;
public:
LocallabToolList();
// Setter for tool list listener
void setLocallabToolListListener(LocallabToolListListener* ltll)
{
listListener = ltll;
}
// Tool list management function
void addToolRow(const Glib::ustring &toolname, const int id);
void removeToolRow(const Glib::ustring &toolname);
void removeAllTool();
private:
// Tool list event management function
void toolRowSelected();
};
/* ==== Locallab ==== */
class Locallab :
public ToolParamBlock,
public FoldableToolPanel,
public rtengine::LocallabListener,
public ControlPanelListener,
public LocallabToolListener,
public LocallabToolListListener
{
private:
// Spot control panel widget
ControlSpotPanel* const expsettings;
// Tool list widget
LocallabToolList* const toollist;
// Locallab tool widgets
LocallabColor expcolor;
LocallabExposure expexpose;
LocallabShadow expshadhigh;
LocallabVibrance expvibrance;
LocallabSoft expsoft;
LocallabBlur expblur;
LocallabTone exptonemap;
LocallabRetinex expreti;
LocallabSharp expsharp;
LocallabContrast expcontrast;
LocallabCBDL expcbdl;
LocallabLog explog;
LocallabMask expmask;
Locallabcie expcie;
std::vector<LocallabTool*> locallabTools;
// Locallab tools mask background management data
std::vector<locallabRetiMinMax> retiMinMax;
// Locallab tools mask background management data
std::vector<locallabRef> maskBackRef;
// Other widgets
Gtk::Button* const resetshowButton;
Glib::ustring spotName;
public:
Locallab();
// FoldableToolPanel management functions
void read(const rtengine::procparams::ProcParams* pp, const ParamsEdited* pedited = nullptr) override;
void write(rtengine::procparams::ProcParams* pp, ParamsEdited* pedited = nullptr) override;
void setDefaults(const rtengine::procparams::ProcParams* defParams, const ParamsEdited* pedited = nullptr) override;
void setListener(ToolPanelListener* tpl) override;
// Locallab Retinex tool min/man management function
void minmaxChanged(const std::vector<locallabRetiMinMax> &minmax, int selspot) override;
// Locallab Log Encoding autocompute function
void logencodChanged(const float blackev, const float whiteev, const float sourceg, const float sourceab, const float targetg, const bool autocomput, const bool autocie, const float jz1) override;
// Locallab tools mask background management function
// void refChanged(const std::vector<locallabRef> &ref, int selspot) override;
void refChanged2(float *huerefp, float *chromarefp, float *lumarefp, float *fabrefp, int selspot)override;
// Mask visibility management functions
struct llMaskVisibility {
bool previewDeltaE;
int colorMask;
int colorMaskinv;
int expMask;
int expMaskinv;
int SHMask;
int SHMaskinv;
int vibMask;
int softMask;
int blMask;
int tmMask;
int retiMask;
int sharMask;
int lcMask;
int cbMask;
int logMask;
int maskMask;
int cieMask;
};
void resetMaskVisibility();
llMaskVisibility getMaskVisibility() const;
// Other widgets event functions
void resetshowPressed();
// EditProvider management function
void setEditProvider(EditDataProvider* provider) override;
void subscribe();
void unsubscribe();
// FoldableToolPanel event function
void enabledChanged() override;
// Curve management function
void autoOpenCurve() override;
// Locallab tools expanders management functions
void foldAllButOne(LocallabTool* except);
void openAllTools();
// Locallab tools advice tooltips management function
void updateShowtooltipVisibility(bool showtooltip);
private:
// Locallab tools management functions
void addTool(Gtk::Box* where, LocallabTool* tool);
// Locallab GUI management function
void setParamEditable(bool cond);
// ControlSpotListener function
void resetToolMaskView() override;
void spotNameChanged(const Glib::ustring &newName) override;
// LocallabToolListener function
void resetOtherMaskView(LocallabTool* current) override;
void toolRemoved(LocallabTool* current) override;
// LocallabToolListListener function
void locallabToolToAdd(const Glib::ustring &toolname) override;
};
#endif