flipperzero-firmware/firmware/targets/f5/api-hal/api-hal-resources.h

93 lines
2.0 KiB
C
Raw Normal View History

#pragma once
#include "main.h"
#include <furi.h>
#include <stm32wbxx.h>
#include <stm32wbxx_ll_gpio.h>
#ifdef __cplusplus
extern "C" {
#endif
#define POWER_I2C_SCL_Pin LL_GPIO_PIN_9
#define POWER_I2C_SCL_GPIO_Port GPIOA
#define POWER_I2C_SDA_Pin LL_GPIO_PIN_10
#define POWER_I2C_SDA_GPIO_Port GPIOA
#define POWER_I2C I2C1
/** Timing register value is computed with the STM32CubeMX Tool,
* Fast Mode @100kHz with I2CCLK = 64 MHz,
* rise time = 0ns, fall time = 0ns
*/
#define POWER_I2C_TIMINGS 0x10707DBC
/* Input Related Constants */
#define INPUT_DEBOUNCE_TICKS 20
/* Input Keys */
typedef enum {
InputKeyUp,
InputKeyDown,
InputKeyRight,
InputKeyLeft,
InputKeyOk,
InputKeyBack,
} InputKey;
/* Light */
typedef enum {
LightRed,
LightGreen,
LightBlue,
LightBacklight,
} Light;
typedef struct {
const GPIO_TypeDef* port;
const uint16_t pin;
const InputKey key;
const bool inverted;
} InputPin;
extern const InputPin input_pins[];
extern const size_t input_pins_count;
extern const GpioPin vibro_gpio;
extern const GpioPin ibutton_gpio;
2021-05-08 19:24:05 +00:00
extern const GpioPin gpio_cc1101_g0;
extern const GpioPin gpio_rf_sw_0;
extern const GpioPin gpio_rf_sw_1;
extern const GpioPin gpio_subghz_cs;
extern const GpioPin gpio_display_cs;
extern const GpioPin gpio_display_rst;
extern const GpioPin gpio_display_di;
extern const GpioPin gpio_sdcard_cs;
extern const GpioPin gpio_nfc_cs;
extern const GpioPin gpio_spi_d_miso;
extern const GpioPin gpio_spi_d_mosi;
extern const GpioPin gpio_spi_d_sck;
extern const GpioPin gpio_spi_r_miso;
extern const GpioPin gpio_spi_r_mosi;
extern const GpioPin gpio_spi_r_sck;
Low frequency RFID app [Read stage] (#385) * App Lfrfid: init * HAL-resources: add external gpios * HAL-pwm: fix frequency calculation * App LFRFID: generic manchester decoder * App LFRFID: em-marine decoder * App iButton: fix dwt timing acquire * App LFRFID: rfid reader * App LFRFID: temporary read keys on read scene * App LFRFID: remove atomic bool init. * App LFRFID: add *.c to build * App LFRFID: unstable HID decoder * App LFRFID: HID-26 reading * HAL OS: disable sleep * App LFRFID: HID-26 reader: remove debug * App LFRFID: static data decoder-analyzer * App LFRFID: very raw Indala decoder * App LFRFID: multiprotocol reader * App LFRFID: more reliable HID decoder * App LFRFID: syntax fix * App LFRFID: simple read scene * Gui: force redraw on screen stream connect * HAL-OS: allow sleep * App LFRFID: notify api, tune view, tune scene * App LFRFID: simple rfid emulator * App LFRFID: more scenes, more reliable EM decoder. * App LFRFID: format fix * App LFRFID: warning fix * Api-hal-resources: add rfid pins, rename external pins * App LFRFID: remove unused emulator * App LFRFID: use new gpio hal api * App accessor: use new ext gpio name * App LFRFID: remove unused emulator * App LFRFID: remove debug gpio * Api-hal-resources: alternate functions init * Api-hal-rfid: new api * Api-hal-ibutton: new api * Api-hal: new headers * App LFRFID: use new api in reader subroutines * App LFRFID: use new api in emulator subroutines * App LFRFID: remove old app * App LFRFID, App iButton: fix memleak * Api-hal-rfid: comments * App LFRFID: pulse joiner helper, it combines pulses of different polarity into one pulse suitable for a timer * App LFRFID: pulse joiner, now can accept only ne pulse * App LFRFID: pulse joiner, fixes * App LFRFID: EM encoder and emulation * App LFRFID: format fixes * App LFRFID: emmarine encoder cleanup * App LFRFID: HID Encoder blank * App LFRFID: Indala Encoder blank
2021-05-04 13:21:16 +00:00
extern const GpioPin gpio_ext_pc0;
extern const GpioPin gpio_ext_pc1;
extern const GpioPin gpio_ext_pc3;
extern const GpioPin gpio_ext_pb2;
extern const GpioPin gpio_ext_pb3;
extern const GpioPin gpio_ext_pa4;
extern const GpioPin gpio_ext_pa6;
extern const GpioPin gpio_ext_pa7;
extern const GpioPin gpio_rfid_pull;
extern const GpioPin gpio_rfid_carrier_out;
extern const GpioPin gpio_rfid_data_in;
#ifdef __cplusplus
}
#endif