liz/flipperzero-firmware
liz/flipperzero-firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b564e8eb38
flipperzero-firmware/firmware/targets/f6/target.mk

160 lines
6.6 KiB
Makefile
Raw Normal View History

[FL-1196] Targets: add F6 (#427) * Targets: add F6 * F6: Update linker script for use with internal storage * F6: synchronize with F5, add all changes arriving in V9 board, update cube project. Github workflow: add multi-target build, add F6 to build targets. * CI: fix full assembly * CI: better artifact naming scheme * CI: fix artifacts wildcard * F6: Swap C10 - A15, vibro and sdcard detect pins
2021-05-18 09:23:14 +00:00
TOOLCHAIN = arm
BOOT_ADDRESS = 0x08000000
FW_ADDRESS = 0x08008000
OS_OFFSET = 0x00008000
FLASH_ADDRESS = 0x08008000
NO_BOOTLOADER ?= 0
ifeq ($(NO_BOOTLOADER), 1)
BOOT_ADDRESS = 0x08000000
FW_ADDRESS = 0x08000000
OS_OFFSET = 0x00000000
FLASH_ADDRESS = 0x08000000
CFLAGS += -DNO_BOOTLOADER
endif
OPENOCD_OPTS = -f interface/stlink.cfg -c "transport select hla_swd" -f ../debug/stm32wbx.cfg -c "stm32wbx.cpu configure -rtos auto" -c "init"
BOOT_CFLAGS = -DBOOT_ADDRESS=$(BOOT_ADDRESS) -DFW_ADDRESS=$(FW_ADDRESS) -DOS_OFFSET=$(OS_OFFSET)
MCU_FLAGS = -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard
CFLAGS += $(MCU_FLAGS) $(BOOT_CFLAGS) -DSTM32WB55xx -Wall -fdata-sections -ffunction-sections
LDFLAGS += $(MCU_FLAGS) -specs=nosys.specs -specs=nano.specs
CPPFLAGS += -fno-rtti -fno-use-cxa-atexit -fno-exceptions
LDFLAGS += -Wl,--start-group -lstdc++ -lsupc++ -Wl,--end-group
[FL-1961] Cli: device_info format versioning. Detach target from firmware name. #765
2021-10-16 11:25:32 +00:00
HARDWARE_TARGET = 6
[FL-1196] Targets: add F6 (#427) * Targets: add F6 * F6: Update linker script for use with internal storage * F6: synchronize with F5, add all changes arriving in V9 board, update cube project. Github workflow: add multi-target build, add F6 to build targets. * CI: fix full assembly * CI: better artifact naming scheme * CI: fix artifacts wildcard * F6: Swap C10 - A15, vibro and sdcard detect pins
2021-05-18 09:23:14 +00:00
MXPROJECT_DIR = $(TARGET_DIR)
F6: USB glue cleanup and fixes (#666) * USB-CDC: accepting the next data packet only if we process previous data * USB-CDC: use USB FS packet size * HAL-console: puts method * Check: print assertion data * FuriHal: rx stream free space aware CDC confirmation. * Bootloader: pull down USB lines, leave the rest to the firmware or bootloader * F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom. * F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-22 10:43:45 +00:00
# Entry Point
ASM_SOURCES += $(MXPROJECT_DIR)/startup_stm32wb55xx_cm4.s
# STM32WB HAL
CUBE_DIR = ../lib/STM32CubeWB
CFLAGS += \
-DUSE_FULL_LL_DRIVER \
-DUSE_HAL_DRIVER \
-DHAVE_FREERTOS
CFLAGS += \
-I$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Inc \
-I$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Inc/Legacy \
[FL-1857] New USB stack (#735) * libusb_stm32 USB stack test * USB: Add dual CDC mode * USB HID demo, added libusb_stm32 as submodule * Target F6/F7: remomve unused ll_usb Co-authored-by: n.minaylov <n.minaylov@flipperdevices.com> Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-06 09:24:09 +00:00
-I$(CUBE_DIR)/Drivers/CMSIS/Device/ST \
F6: USB glue cleanup and fixes (#666) * USB-CDC: accepting the next data packet only if we process previous data * USB-CDC: use USB FS packet size * HAL-console: puts method * Check: print assertion data * FuriHal: rx stream free space aware CDC confirmation. * Bootloader: pull down USB lines, leave the rest to the firmware or bootloader * F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom. * F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-22 10:43:45 +00:00
-I$(CUBE_DIR)/Drivers/CMSIS/Device/ST/STM32WBxx/Include \
-I$(CUBE_DIR)/Drivers/CMSIS/Include
C_SOURCES += \
[FL-1196] Targets: add F6 (#427) * Targets: add F6 * F6: Update linker script for use with internal storage * F6: synchronize with F5, add all changes arriving in V9 board, update cube project. Github workflow: add multi-target build, add F6 to build targets. * CI: fix full assembly * CI: better artifact naming scheme * CI: fix artifacts wildcard * F6: Swap C10 - A15, vibro and sdcard detect pins
2021-05-18 09:23:14 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cryp.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_ipcc.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c \
[FL-1528] SubGhz: dma send (#579) * Gui: input injection in screen stream * Cli: expose ASCII table in public header * SubGhz: dma output draft * SubGhz: output initialization cleanup * SubGhz: update dma send routine, add subghz_tx cli command. * SubGhz: proper register address for DMA * SubGhz: proper, fully working dma+tim2 configuration * SubGhz: transmit PT with cli. * Drivers: fix invalid size in CC1101 PA_TABLE loading routine. * Interrupts: configurable DMA isrs. * F5: backport fixes. * SubGhz: free buffer after use * SubGhz: use sleep instead of reset at the end * SubGhz: async tx repeat with circular DMA * SubGhz: disable dma channel on complete, adjust PT send timings * SubGhz: backport function singature change to F5 * SubGhz: add tx debug gpio
2021-07-15 13:54:11 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_dma.c \
[FL-1196] Targets: add F6 (#427) * Targets: add F6 * F6: Update linker script for use with internal storage * F6: synchronize with F5, add all changes arriving in V9 board, update cube project. Github workflow: add multi-target build, add F6 to build targets. * CI: fix full assembly * CI: better artifact naming scheme * CI: fix artifacts wildcard * F6: Swap C10 - A15, vibro and sdcard detect pins
2021-05-18 09:23:14 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_gpio.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_i2c.c \
[FL-1666] Bootloader: info screen when we going to DFU. FuriHal: port SPI to LL. Cleanup. (#634) * FuriHal: port spi to ll. Bootloader: add spi and display. * Makefile: rollback disabled freertos introspection * FuriHal: spi lock asserts. F6: minor cleanup port sdcard shenanigans to furi_hal_gpio. * SdCard: port missing bits to furi-hal-gpio * FuriHal: fix broken RX in SPI, update SPI API usage. RFAL: more asserts in SPI platform code. * GUI: clear canvas on start. FuriHal: no pullup on radio spi bus. * FuriHal: use check instead of assert in spi lock routines * FuriHal: remove timeouts * SdHal: add guard time to SDCARD CS PIN control. * FuriHal: proper name for SPI device reconfigure routine. SdHal: one more enterprise delay and better documentation. * Bootloader: update DFU text and add image. * FuriHal: drop unused ST HAL modules. * SdHal: fixed swapped hal_gpio_init_ex arguments * SpiHal: fixed swapped hal_gpio_init_ex arguments * IrdaHal: use hal_gpio_init instead of hal_gpio_init_ex * RfidHal: fixed swapped hal_gpio_init_ex arguments Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-08-12 08:48:05 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lptim.c \
[FL-1196] Targets: add F6 (#427) * Targets: add F6 * F6: Update linker script for use with internal storage * F6: synchronize with F5, add all changes arriving in V9 board, update cube project. Github workflow: add multi-target build, add F6 to build targets. * CI: fix full assembly * CI: better artifact naming scheme * CI: fix artifacts wildcard * F6: Swap C10 - A15, vibro and sdcard detect pins
2021-05-18 09:23:14 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rcc.c \
[FL-1666] Bootloader: info screen when we going to DFU. FuriHal: port SPI to LL. Cleanup. (#634) * FuriHal: port spi to ll. Bootloader: add spi and display. * Makefile: rollback disabled freertos introspection * FuriHal: spi lock asserts. F6: minor cleanup port sdcard shenanigans to furi_hal_gpio. * SdCard: port missing bits to furi-hal-gpio * FuriHal: fix broken RX in SPI, update SPI API usage. RFAL: more asserts in SPI platform code. * GUI: clear canvas on start. FuriHal: no pullup on radio spi bus. * FuriHal: use check instead of assert in spi lock routines * FuriHal: remove timeouts * SdHal: add guard time to SDCARD CS PIN control. * FuriHal: proper name for SPI device reconfigure routine. SdHal: one more enterprise delay and better documentation. * Bootloader: update DFU text and add image. * FuriHal: drop unused ST HAL modules. * SdHal: fixed swapped hal_gpio_init_ex arguments * SpiHal: fixed swapped hal_gpio_init_ex arguments * IrdaHal: use hal_gpio_init instead of hal_gpio_init_ex * RfidHal: fixed swapped hal_gpio_init_ex arguments Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-08-12 08:48:05 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_spi.c \
[FL-1156, FL-1249] Add IRDA encoder/decoder library (#451) * Add cscope db generation * Add api-hal-irda, TIM2: HAL->LL * Add libirda: pwm decoding * Universal state machine * Add irda decoder library * Move IRDA capture to standalone tool * Add encoder/decoder samsung32, NEC, fix bugs * Port current App to new Irda lib * Fix clang format for test data * Port IRDA api-hal to f6 Co-authored-by: あく <alleteam@gmail.com>
2021-05-18 10:51:00 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_tim.c \
[FL-1558] Technical Debt: console, bootloader, targets, stdglue, etc... (#590) * ApiHal: console abstraction, change uart baud rate to 230400. Bootloader: drop F5. Furi: prevent thread local output to serial console in stdglue. * ApiHal: take control over system initialization, reorder some subsystems in a hope of fixing USB issues. * Main: cleanup dead code. ISR: take care of HSECSS by our self. USB: leave clock configuration alone. * F6 cube: switch RCC to LL. * Cli: rollback return behavior.
2021-07-20 17:14:42 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usart.c \
[FL-1885] USB-UART bridge (#778) * [FL-1885] USB-UART: app and worker * [FL-1885] USB-UART: UART on CDC0 Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-21 18:12:20 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lpuart.c \
F6: USB glue cleanup and fixes (#666) * USB-CDC: accepting the next data packet only if we process previous data * USB-CDC: use USB FS packet size * HAL-console: puts method * Check: print assertion data * FuriHal: rx stream free space aware CDC confirmation. * Bootloader: pull down USB lines, leave the rest to the firmware or bootloader * F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom. * F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-22 10:43:45 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_utils.c
# FreeRTOS
CFLAGS += \
-I$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/include \
-I$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2 \
-I$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F
C_SOURCES += \
[FL-1196] Targets: add F6 (#427) * Targets: add F6 * F6: Update linker script for use with internal storage * F6: synchronize with F5, add all changes arriving in V9 board, update cube project. Github workflow: add multi-target build, add F6 to build targets. * CI: fix full assembly * CI: better artifact naming scheme * CI: fix artifacts wildcard * F6: Swap C10 - A15, vibro and sdcard detect pins
2021-05-18 09:23:14 +00:00
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/event_groups.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/list.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/queue.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/stream_buffer.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/tasks.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/timers.c \
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/CMSIS_RTOS_V2/cmsis_os2.c \
F6: USB glue cleanup and fixes (#666) * USB-CDC: accepting the next data packet only if we process previous data * USB-CDC: use USB FS packet size * HAL-console: puts method * Check: print assertion data * FuriHal: rx stream free space aware CDC confirmation. * Bootloader: pull down USB lines, leave the rest to the firmware or bootloader * F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom. * F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-22 10:43:45 +00:00
$(CUBE_DIR)/Middlewares/Third_Party/FreeRTOS/Source/portable/GCC/ARM_CM4F/port.c
[FL-1196] Targets: add F6 (#427) * Targets: add F6 * F6: Update linker script for use with internal storage * F6: synchronize with F5, add all changes arriving in V9 board, update cube project. Github workflow: add multi-target build, add F6 to build targets. * CI: fix full assembly * CI: better artifact naming scheme * CI: fix artifacts wildcard * F6: Swap C10 - A15, vibro and sdcard detect pins
2021-05-18 09:23:14 +00:00
F6: USB glue cleanup and fixes (#666) * USB-CDC: accepting the next data packet only if we process previous data * USB-CDC: use USB FS packet size * HAL-console: puts method * Check: print assertion data * FuriHal: rx stream free space aware CDC confirmation. * Bootloader: pull down USB lines, leave the rest to the firmware or bootloader * F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom. * F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-22 10:43:45 +00:00
# BLE glue
[FL-1196] Targets: add F6 (#427) * Targets: add F6 * F6: Update linker script for use with internal storage * F6: synchronize with F5, add all changes arriving in V9 board, update cube project. Github workflow: add multi-target build, add F6 to build targets. * CI: fix full assembly * CI: better artifact naming scheme * CI: fix artifacts wildcard * F6: Swap C10 - A15, vibro and sdcard detect pins
2021-05-18 09:23:14 +00:00
CFLAGS += \
F6: USB glue cleanup and fixes (#666) * USB-CDC: accepting the next data packet only if we process previous data * USB-CDC: use USB FS packet size * HAL-console: puts method * Check: print assertion data * FuriHal: rx stream free space aware CDC confirmation. * Bootloader: pull down USB lines, leave the rest to the firmware or bootloader * F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom. * F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-22 10:43:45 +00:00
-I$(TARGET_DIR)/ble-glue \
[FL-1196] Targets: add F6 (#427) * Targets: add F6 * F6: Update linker script for use with internal storage * F6: synchronize with F5, add all changes arriving in V9 board, update cube project. Github workflow: add multi-target build, add F6 to build targets. * CI: fix full assembly * CI: better artifact naming scheme * CI: fix artifacts wildcard * F6: Swap C10 - A15, vibro and sdcard detect pins
2021-05-18 09:23:14 +00:00
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/template \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/utilities \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/shci
F6: USB glue cleanup and fixes (#666) * USB-CDC: accepting the next data packet only if we process previous data * USB-CDC: use USB FS packet size * HAL-console: puts method * Check: print assertion data * FuriHal: rx stream free space aware CDC confirmation. * Bootloader: pull down USB lines, leave the rest to the firmware or bootloader * F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom. * F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-22 10:43:45 +00:00
C_SOURCES += \
[FL-1196] Targets: add F6 (#427) * Targets: add F6 * F6: Update linker script for use with internal storage * F6: synchronize with F5, add all changes arriving in V9 board, update cube project. Github workflow: add multi-target build, add F6 to build targets. * CI: fix full assembly * CI: better artifact naming scheme * CI: fix artifacts wildcard * F6: Swap C10 - A15, vibro and sdcard detect pins
2021-05-18 09:23:14 +00:00
$(wildcard $(TARGET_DIR)/ble-glue/*.c) \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/utilities/otp.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/utilities/stm_list.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/utilities/dbg_trace.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/svc/Src/svc_ctl.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/template/osal.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/auto/ble_hci_le.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/auto/ble_gap_aci.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/auto/ble_gatt_aci.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/auto/ble_hal_aci.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/tl_mbox.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/hci_tl.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/hci_tl_if.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/shci_tl.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/shci_tl_if.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/shci/shci.c
[FL-1857] New USB stack (#735) * libusb_stm32 USB stack test * USB: Add dual CDC mode * USB HID demo, added libusb_stm32 as submodule * Target F6/F7: remomve unused ll_usb Co-authored-by: n.minaylov <n.minaylov@flipperdevices.com> Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-06 09:24:09 +00:00
# USB stack
F6: USB glue cleanup and fixes (#666) * USB-CDC: accepting the next data packet only if we process previous data * USB-CDC: use USB FS packet size * HAL-console: puts method * Check: print assertion data * FuriHal: rx stream free space aware CDC confirmation. * Bootloader: pull down USB lines, leave the rest to the firmware or bootloader * F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom. * F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-22 10:43:45 +00:00
CFLAGS += \
[FL-1857] New USB stack (#735) * libusb_stm32 USB stack test * USB: Add dual CDC mode * USB HID demo, added libusb_stm32 as submodule * Target F6/F7: remomve unused ll_usb Co-authored-by: n.minaylov <n.minaylov@flipperdevices.com> Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-06 09:24:09 +00:00
-DSTM32WB \
-DUSB_PMASIZE=0x400
F6: USB glue cleanup and fixes (#666) * USB-CDC: accepting the next data packet only if we process previous data * USB-CDC: use USB FS packet size * HAL-console: puts method * Check: print assertion data * FuriHal: rx stream free space aware CDC confirmation. * Bootloader: pull down USB lines, leave the rest to the firmware or bootloader * F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom. * F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-22 10:43:45 +00:00
# Furi HAL
FURI_HAL_OS_DEBUG ?= 0
ifeq ($(FURI_HAL_OS_DEBUG), 1)
CFLAGS += -DFURI_HAL_OS_DEBUG
endif
FURI_HAL_SUBGHZ_TX_GPIO ?= 0
ifneq ($(FURI_HAL_SUBGHZ_TX_GPIO), 0)
CFLAGS += -DFURI_HAL_SUBGHZ_TX_GPIO=$(FURI_HAL_SUBGHZ_TX_GPIO)
endif
ifeq ($(INVERT_RFID_IN), 1)
CFLAGS += -DINVERT_RFID_IN
endif
FURI_HAL_DIR = $(TARGET_DIR)/furi-hal
CFLAGS += -I$(FURI_HAL_DIR)
C_SOURCES += $(wildcard $(FURI_HAL_DIR)/*.c)
# Other
CFLAGS += \
-I$(MXPROJECT_DIR)/Inc \
-I$(MXPROJECT_DIR)/Src/fatfs
C_SOURCES += \
$(wildcard $(MXPROJECT_DIR)/Src/*.c) \
$(wildcard $(MXPROJECT_DIR)/Src/fatfs/*.c)
# Linker options
ifeq ($(NO_BOOTLOADER), 1)
[FL-1990] Correct release type in copro manifest and rename boot to bootloader (#787) * World: rename boot to bootloader. * Scripts: correct release type in copro bundler.
2021-10-26 12:24:14 +00:00
LDFLAGS += -T$(MXPROJECT_DIR)/stm32wb55xx_flash_cm4_no_bootloader.ld
F6: USB glue cleanup and fixes (#666) * USB-CDC: accepting the next data packet only if we process previous data * USB-CDC: use USB FS packet size * HAL-console: puts method * Check: print assertion data * FuriHal: rx stream free space aware CDC confirmation. * Bootloader: pull down USB lines, leave the rest to the firmware or bootloader * F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom. * F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-22 10:43:45 +00:00
else
[FL-1990] Correct release type in copro manifest and rename boot to bootloader (#787) * World: rename boot to bootloader. * Scripts: correct release type in copro bundler.
2021-10-26 12:24:14 +00:00
LDFLAGS += -T$(MXPROJECT_DIR)/stm32wb55xx_flash_cm4_with_bootloader.ld
F6: USB glue cleanup and fixes (#666) * USB-CDC: accepting the next data packet only if we process previous data * USB-CDC: use USB FS packet size * HAL-console: puts method * Check: print assertion data * FuriHal: rx stream free space aware CDC confirmation. * Bootloader: pull down USB lines, leave the rest to the firmware or bootloader * F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom. * F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-22 10:43:45 +00:00
endif
[FL-1196] Targets: add F6 (#427) * Targets: add F6 * F6: Update linker script for use with internal storage * F6: synchronize with F5, add all changes arriving in V9 board, update cube project. Github workflow: add multi-target build, add F6 to build targets. * CI: fix full assembly * CI: better artifact naming scheme * CI: fix artifacts wildcard * F6: Swap C10 - A15, vibro and sdcard detect pins
2021-05-18 09:23:14 +00:00
SVD_FILE = ../debug/STM32WB55_CM4.svd
Reference in New Issue Copy Permalink