[FL-1528] SubGhz: dma send (#579)

* Gui: input injection in screen stream
* Cli: expose ASCII table in public header
* SubGhz: dma output draft
* SubGhz: output initialization cleanup
* SubGhz: update dma send routine, add subghz_tx cli command.
* SubGhz: proper register address for DMA
* SubGhz: proper, fully working dma+tim2 configuration
* SubGhz: transmit PT with cli.
* Drivers: fix invalid size in CC1101 PA_TABLE loading routine.
* Interrupts: configurable DMA isrs.
* F5: backport fixes.
* SubGhz: free buffer after use
* SubGhz: use sleep instead of reset at the end
* SubGhz: async tx repeat with circular DMA
* SubGhz: disable dma channel on complete, adjust PT send timings
* SubGhz: backport function singature change to F5
* SubGhz: add tx debug gpio

applications/subghz/subghz_cli.c

@@ -66,9 +66,8 @@ void subghz_cli_command_tx_carrier(Cli* cli, string_t args, void* context) {
         osDelay(250);
     }
 
-    api_hal_subghz_reset();
     api_hal_subghz_set_path(ApiHalSubGhzPathIsolate);
-    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
+    api_hal_subghz_sleep();
 }
 
 void subghz_cli_command_rx_carrier(Cli* cli, string_t args, void* context) {
@@ -92,8 +91,6 @@ void subghz_cli_command_rx_carrier(Cli* cli, string_t args, void* context) {
     printf("Receiving at frequency %lu Hz\r\n", frequency);
     printf("Press CTRL+C to stop\r\n");
 
-    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
-
     api_hal_subghz_rx();
 
     while(!cli_cmd_interrupt_received(cli)) {
@@ -102,8 +99,8 @@ void subghz_cli_command_rx_carrier(Cli* cli, string_t args, void* context) {
         fflush(stdout);
     }
 
-    api_hal_subghz_reset();
     api_hal_subghz_set_path(ApiHalSubGhzPathIsolate);
+    api_hal_subghz_sleep();
 }
 
 void subghz_cli_command_tx_pt(Cli* cli, string_t args, void* context) {
@@ -148,16 +145,13 @@ void subghz_cli_command_tx_pt(Cli* cli, string_t args, void* context) {
         api_hal_subghz_idle();
         api_hal_subghz_write_packet(subghz_test_packet_data, sizeof(subghz_test_packet_data));
         api_hal_subghz_tx();
-        while(!hal_gpio_read(&gpio_cc1101_g0))
+        while(!hal_gpio_read(&gpio_cc1101_g0)) osDelay(1); // Wait for sync
-            ; // Wait for sync
+        while(hal_gpio_read(&gpio_cc1101_g0)) osDelay(1); // Wait end of transaction
-        while(hal_gpio_read(&gpio_cc1101_g0))
-            ; // Wait end of transaction
         count--;
     }
 
-    api_hal_subghz_reset();
+    api_hal_subghz_sleep();
     api_hal_subghz_set_path(ApiHalSubGhzPathIsolate);
-    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
 }
 
 void subghz_cli_command_rx_pt(Cli* cli, string_t args, void* context) {
@@ -204,12 +198,73 @@ void subghz_cli_command_rx_pt(Cli* cli, string_t args, void* context) {
 
     printf("Received %lu packets", packet_cnt);
 
-    api_hal_subghz_reset();
+    api_hal_subghz_sleep();
     api_hal_subghz_set_path(ApiHalSubGhzPathIsolate);
     hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
 }
 
+#define SUBGHZ_PT_SHORT 260
+#define SUBGHZ_PT_LONG (SUBGHZ_PT_SHORT * 3)
+#define SUBGHZ_PT_GUARD 8060
+
 void subghz_cli_command_tx(Cli* cli, string_t args, void* context) {
+    uint32_t frequency = 433920000;
+    size_t repeat = 10;
+    uint32_t key = 0x0074BADE;
+
+    if(string_size(args)) {
+        int ret = sscanf(string_get_cstr(args), "%lx %lu %u", &key, &frequency, &repeat);
+        if(ret != 3) {
+            printf(
+                "sscanf returned %d, key: %lx, frequency: %lu, repeat: %u\r\n",
+                ret,
+                key,
+                frequency,
+                repeat);
+            cli_print_usage(
+                "subghz_rx",
+                "<3 Byte Key in hex> <Frequency in HZ> <Repeat count>",
+                string_get_cstr(args));
+            return;
+        }
+
+        if(!subghz_check_frequency_range(frequency)) {
+            printf(
+                "Frequency must be in " CC1101_FREQUENCY_RANGE_STR " range, not %lu\r\n",
+                frequency);
+            return;
+        }
+    }
+
+    size_t subghz_test_data_size = 25 * 2 * sizeof(uint32_t);
+    uint32_t* subghz_test_data = furi_alloc(subghz_test_data_size);
+
+    size_t pos = 0;
+    for(uint8_t i = 0; i < 24; i++) {
+        uint8_t byte = i / 8;
+        uint8_t bit = i % 8;
+        bool value = (((uint8_t*)&key)[2 - byte] >> (7 - bit)) & 1;
+        if(value) {
+            subghz_test_data[pos++] = SUBGHZ_PT_SHORT;
+            subghz_test_data[pos++] = SUBGHZ_PT_LONG;
+        } else {
+            subghz_test_data[pos++] = SUBGHZ_PT_LONG;
+            subghz_test_data[pos++] = SUBGHZ_PT_SHORT;
+        }
+    }
+    subghz_test_data[pos++] = SUBGHZ_PT_SHORT;
+    subghz_test_data[pos++] = SUBGHZ_PT_SHORT + SUBGHZ_PT_GUARD;
+
+    api_hal_subghz_reset();
+    api_hal_subghz_load_preset(ApiHalSubGhzPresetMP);
+    frequency = api_hal_subghz_set_frequency_and_path(frequency);
+
+    api_hal_subghz_start_async_tx(subghz_test_data, subghz_test_data_size, repeat);
+    api_hal_subghz_wait_async_tx();
+    api_hal_subghz_stop_async_tx();
+
+    free(subghz_test_data);
+    api_hal_subghz_sleep();
 }
 
 #include <fl_subghz/protocols/subghz_protocol.h>
@@ -248,25 +303,20 @@ void subghz_cli_command_rx(Cli* cli, string_t args, void* context) {
     }
 
     api_hal_subghz_reset();
-    api_hal_subghz_idle();
     api_hal_subghz_load_preset(ApiHalSubGhzPresetMP);
+    frequency = api_hal_subghz_set_frequency_and_path(frequency);
+    hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
 
     SubGhzProtocol* protocol = subghz_protocol_alloc();
     subghz_protocol_load_keeloq_file(protocol, "/assets/subghz/keeloq_mfcodes");
     subghz_protocol_load_nice_flor_s_file(protocol, "/assets/subghz/nice_floor_s_rx");
     subghz_protocol_enable_dump_text(protocol, NULL, NULL);
 
-    frequency = api_hal_subghz_set_frequency_and_path(frequency);
-    hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
-
     StreamBufferHandle_t rx_stream =
         xStreamBufferCreate(sizeof(LevelDuration) * 1024, sizeof(LevelDuration));
 
-    api_hal_subghz_set_capture_callback(subghz_cli_command_rx_callback, rx_stream);
+    api_hal_subghz_set_async_rx_callback(subghz_cli_command_rx_callback, rx_stream);
-    api_hal_subghz_enable_capture();
+    api_hal_subghz_start_async_rx();
-
-    api_hal_subghz_flush_rx();
-    api_hal_subghz_rx();
 
     printf("Listening at %lu. Press CTRL+C to stop\r\n", frequency);
     LevelDuration level_duration;
@@ -284,8 +334,8 @@ void subghz_cli_command_rx(Cli* cli, string_t args, void* context) {
         }
     }
 
+    api_hal_subghz_stop_async_rx();
+    api_hal_subghz_sleep();
     subghz_protocol_free(protocol);
     vStreamBufferDelete(rx_stream);
-    api_hal_subghz_disable_capture();
-    api_hal_subghz_init();
 }

applications/subghz/views/subghz_capture.c

@@ -156,8 +156,8 @@ void subghz_capture_enter(void* context) {
 
     hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
 
-    api_hal_subghz_set_capture_callback(subghz_worker_rx_callback, subghz_capture->worker);
+    api_hal_subghz_set_async_rx_callback(subghz_worker_rx_callback, subghz_capture->worker);
-    api_hal_subghz_enable_capture();
+    api_hal_subghz_start_async_rx();
 
     subghz_worker_start(subghz_capture->worker);
 
@@ -171,8 +171,8 @@ void subghz_capture_exit(void* context) {
 
     subghz_worker_stop(subghz_capture->worker);
 
-    api_hal_subghz_disable_capture();
+    api_hal_subghz_stop_async_rx();
-    api_hal_subghz_init();
+    api_hal_subghz_sleep();
 }
 
 uint32_t subghz_capture_back(void* context) {

applications/subghz/views/subghz_static.c

@@ -100,15 +100,15 @@ bool subghz_static_input(InputEvent* event, void* context) {
                             uint8_t bit = i % 8;
                             bool value = (key[byte] >> (7 - bit)) & 1;
                             // Payload send
-                            hal_gpio_write(&gpio_cc1101_g0, false);
-                            delay_us(value ? SUBGHZ_PT_ONE : SUBGHZ_PT_ZERO);
                             hal_gpio_write(&gpio_cc1101_g0, true);
+                            delay_us(value ? SUBGHZ_PT_ONE : SUBGHZ_PT_ZERO);
+                            hal_gpio_write(&gpio_cc1101_g0, false);
                             delay_us(value ? SUBGHZ_PT_ZERO : SUBGHZ_PT_ONE);
                         }
                         // Last bit
-                        hal_gpio_write(&gpio_cc1101_g0, false);
-                        delay_us(SUBGHZ_PT_ONE);
                         hal_gpio_write(&gpio_cc1101_g0, true);
+                        delay_us(SUBGHZ_PT_ONE);
+                        hal_gpio_write(&gpio_cc1101_g0, false);
                         // Guard time
                         delay_us(10600);
                     }
@@ -132,7 +132,7 @@ void subghz_static_enter(void* context) {
     api_hal_subghz_load_preset(ApiHalSubGhzPresetOokAsync);
 
     hal_gpio_init(&gpio_cc1101_g0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
-    hal_gpio_write(&gpio_cc1101_g0, true);
+    hal_gpio_write(&gpio_cc1101_g0, false);
 
     with_view_model(
         subghz_static->view, (SubghzStaticModel * model) {
@@ -151,7 +151,7 @@ void subghz_static_exit(void* context) {
     // SubghzStatic* subghz_static = context;
 
     // Reinitialize IC to default state
-    api_hal_subghz_init();
+    api_hal_subghz_sleep();
 }
 
 uint32_t subghz_static_back(void* context) {

applications/subghz/views/subghz_test_basic.c

@@ -108,7 +108,7 @@ bool subghz_test_basic_input(InputEvent* event, void* context) {
                 osTimerStart(subghz_test_basic->timer, 1024 / 4);
             } else {
                 hal_gpio_init(&gpio_cc1101_g0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
-                hal_gpio_write(&gpio_cc1101_g0, false);
+                hal_gpio_write(&gpio_cc1101_g0, true);
                 api_hal_subghz_tx();
             }
 
@@ -150,7 +150,7 @@ void subghz_test_basic_exit(void* context) {
     osTimerStop(subghz_test_basic->timer);
 
     // Reinitialize IC to default state
-    api_hal_subghz_init();
+    api_hal_subghz_sleep();
 }
 
 void subghz_test_basic_rssi_timer_callback(void* context) {

applications/subghz/views/subghz_test_packet.c

@@ -157,7 +157,7 @@ void subghz_test_packet_exit(void* context) {
     osTimerStop(subghz_test_packet->timer);
 
     // Reinitialize IC to default state
-    api_hal_subghz_init();
+    api_hal_subghz_sleep();
 }
 
 void subghz_test_packet_rssi_timer_callback(void* context) {

firmware/targets/api-hal-include/api-hal-subghz.h

@@ -2,6 +2,7 @@
 
 #include <stdbool.h>
 #include <stdint.h>
+#include <stddef.h>
 #include <toolbox/level_duration.h>
 
 #ifdef __cplusplus
@@ -23,12 +24,28 @@ typedef enum {
     ApiHalSubGhzPath868,            /** Center Frquency: 868MHz. Path 3: SW1RF3-SW2RF3, LCLC */
 } ApiHalSubGhzPath;
 
+/** SubGhz state */
+typedef enum {
+    SubGhzStateInit,        /** Init pending */
+
+    SubGhzStateIdle,        /** Idle, energy save mode */
+
+    SubGhzStateAsyncRx,   /** Async RX started */
+
+    SubGhzStateAsyncTx,   /** Async TX started, DMA and timer is on */
+    SubGhzStateAsyncTxLast, /** Async TX continue, DMA completed and timer got last value to go */
+    SubGhzStateAsyncTxEnd,  /** Async TX complete, cleanup needed */
+} SubGhzState;
+
 /** Initialize and switch to power save mode
  * Used by internal API-HAL initalization routine
  * Can be used to reinitialize device to safe state and send it to sleep
  */
 void api_hal_subghz_init();
 
+/** Send device to sleep mode */
+void api_hal_subghz_sleep();
+
 /** Dump info to stdout */
 void api_hal_subghz_dump_state();
 
@@ -60,7 +77,6 @@ void api_hal_subghz_write_packet(const uint8_t* data, uint8_t size);
  * @param data, pointer
  * @param size, size
  */
-
 void api_hal_subghz_read_packet(uint8_t* data, uint8_t* size);
 
 /** Flush rx FIFO buffer */
@@ -108,23 +124,40 @@ uint32_t api_hal_subghz_set_frequency(uint32_t value);
  */
 void api_hal_subghz_set_path(ApiHalSubGhzPath path);
 
+/* High Level API */
+
 /** Signal Timings Capture callback */
 typedef void (*ApiHalSubGhzCaptureCallback)(bool level, uint32_t duration, void* context);
 
 /** Set signal timings capture callback
  * @param callback - your callback for front capture
  */
-void api_hal_subghz_set_capture_callback(ApiHalSubGhzCaptureCallback callback, void* context);
+void api_hal_subghz_set_async_rx_callback(ApiHalSubGhzCaptureCallback callback, void* context);
 
 /** Enable signal timings capture 
  * Initializes GPIO and TIM2 for timings capture
  */
-void api_hal_subghz_enable_capture();
+void api_hal_subghz_start_async_rx();
 
 /** Disable signal timings capture
  * Resets GPIO and TIM2
  */
-void api_hal_subghz_disable_capture();
+void api_hal_subghz_stop_async_rx();
+
+/** Send buffer
+ * Initializes GPIO, TIM2 and DMA1 for signal output
+ * @param buffer - pointer to data buffer
+ * @param buffer_size - buffer size in bytes
+ */
+void api_hal_subghz_start_async_tx(uint32_t* buffer, size_t buffer_size, size_t repeat);
+
+/** Wait for async transmission to complete */
+void api_hal_subghz_wait_async_tx();
+
+/** Stop async transmission and cleanup resources
+ * Resets GPIO, TIM2, and DMA1
+ */
+void api_hal_subghz_stop_async_tx();
 
 #ifdef __cplusplus
 }

firmware/targets/api-hal-include/api-hal.h

@@ -5,6 +5,7 @@ template <unsigned int N> struct STOP_EXTERNING_ME {};
 #endif
 
 #include "api-hal-boot.h"
+#include "api-hal-clock.h"
 #include "api-hal-os.h"
 #include "api-hal-i2c.h"
 #include "api-hal-resources.h"
@@ -15,6 +16,7 @@ template <unsigned int N> struct STOP_EXTERNING_ME {};
 #include "api-hal-task.h"
 #include "api-hal-power.h"
 #include "api-hal-vcp.h"
+#include "api-hal-interrupt.h"
 #include "api-hal-version.h"
 #include "api-hal-bt.h"
 #include "api-hal-spi.h"

firmware/targets/f5/api-hal/api-hal-subghz.c

@@ -2,11 +2,15 @@
 
 #include <api-hal-gpio.h>
 #include <api-hal-spi.h>
+#include <api-hal-interrupt.h>
 #include <api-hal-resources.h>
+
 #include <furi.h>
 #include <cc1101.h>
 #include <stdio.h>
 
+static volatile SubGhzState api_hal_subghz_state = SubGhzStateInit;
+
 static const uint8_t api_hal_subghz_preset_ook_async_regs[][2] = {
     /* Base setting */
     { CC1101_IOCFG0,    0x0D }, // GD0 as async serial data output/input
@@ -22,7 +26,7 @@ static const uint8_t api_hal_subghz_preset_ook_async_regs[][2] = {
 };
 
 static const uint8_t api_hal_subghz_preset_ook_async_patable[8] = {
-    0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    0x00, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
 static const uint8_t api_hal_subghz_preset_mp_regs[][2] = {
@@ -61,7 +65,7 @@ static const uint8_t api_hal_subghz_preset_mp_regs[][2] = {
 };
 
 static const uint8_t api_hal_subghz_preset_mp_patable[8] = {
-    0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    0x00, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
 static const uint8_t api_hal_subghz_preset_2fsk_packet_regs[][2] = {
@@ -83,25 +87,52 @@ static const uint8_t api_hal_subghz_preset_2fsk_packet_patable[8] = {
 };
 
 void api_hal_subghz_init() {
-    hal_gpio_init(&gpio_rf_sw_0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
+    furi_assert(api_hal_subghz_state == SubGhzStateInit);
-    hal_gpio_init(&gpio_rf_sw_1, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
+    api_hal_subghz_state = SubGhzStateIdle;
 
     const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
-    // Reset and shutdown
+
+    // Reset
+    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
     cc1101_reset(device);
+    cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHighImpedance);
+
     // Prepare GD0 for power on self test
     hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
+
     // GD0 low
     cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHW);
     while(hal_gpio_read(&gpio_cc1101_g0) != false);
+
     // GD0 high
     cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHW | CC1101_IOCFG_INV);
     while(hal_gpio_read(&gpio_cc1101_g0) != true);
+
     // Reset GD0 to floating state
     cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHighImpedance);
     hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
-    // Turn off oscillator
+
+    // RF switches
+    hal_gpio_init(&gpio_rf_sw_0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
+    hal_gpio_init(&gpio_rf_sw_1, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
+
+    // Go to sleep
     cc1101_shutdown(device);
+
+    api_hal_spi_device_return(device);
+}
+
+void api_hal_subghz_sleep() {
+    furi_assert(api_hal_subghz_state == SubGhzStateIdle);
+    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
+
+    cc1101_switch_to_idle(device);
+
+    cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHighImpedance);
+    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
+
+    cc1101_shutdown(device);
+
     api_hal_spi_device_return(device);
 }
 
@@ -181,7 +212,10 @@ void api_hal_subghz_shutdown() {
 
 void api_hal_subghz_reset() {
     const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
+    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
+    cc1101_switch_to_idle(device);
     cc1101_reset(device);
+    cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHighImpedance);
     api_hal_spi_device_return(device);
 }
 
@@ -266,8 +300,15 @@ void api_hal_subghz_set_path(ApiHalSubGhzPath path) {
     }
 }
 
-void api_hal_subghz_set_capture_callback(ApiHalSubGhzCaptureCallback callback, void* context) {}
+void api_hal_subghz_set_async_rx_callback(ApiHalSubGhzCaptureCallback callback, void* context) {}
 
-void api_hal_subghz_enable_capture() {}
+void api_hal_subghz_start_async_rx() {}
+
+void api_hal_subghz_stop_async_rx() {}
+
+void api_hal_subghz_start_async_tx(uint32_t* buffer, size_t buffer_size, size_t repeat) {}
+
+void api_hal_subghz_wait_async_tx() {}
+
+void api_hal_subghz_stop_async_tx() {}
 
-void api_hal_subghz_disable_capture() {}

firmware/targets/f6/api-hal/api-hal-clock.c

@@ -2,6 +2,15 @@
 
 #include <stm32wbxx_ll_rcc.h>
 
+void api_hal_clock_init() {
+    // AHB
+    LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMAMUX1);
+    LL_AHB1_GRP1_EnableClock(LL_AHB1_GRP1_PERIPH_DMA1);
+
+    // APB
+    LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM2);
+}
+
 void api_hal_clock_switch_to_hsi() {
     LL_RCC_HSI_Enable( );
 

firmware/targets/f6/api-hal/api-hal-clock.h

@@ -1,7 +1,10 @@
 #pragma once
 
-/* Switch to HSI clock */
+/** Initialize clocks */
+void api_hal_clock_init();
+
+/** Switch to HSI clock */
 void api_hal_clock_switch_to_hsi();
 
-/* Switch to PLL clock */
+/** Switch to PLL clock */
 void api_hal_clock_switch_to_pll();

firmware/targets/f6/api-hal/api-hal-interrupt.c

@@ -6,15 +6,17 @@
 
 volatile ApiHalInterruptISR api_hal_tim_tim2_isr = NULL;
 
-void TIM2_IRQHandler(void) {
+#define API_HAL_INTERRUPT_DMA_COUNT 2
-    if (api_hal_tim_tim2_isr) {
+#define API_HAL_INTERRUPT_DMA_CHANNELS_COUNT 8
-        api_hal_tim_tim2_isr();
+
-    } else {
+volatile ApiHalInterruptISR api_hal_dma_channel_isr[API_HAL_INTERRUPT_DMA_COUNT][API_HAL_INTERRUPT_DMA_CHANNELS_COUNT] = {0};
-        HAL_TIM_IRQHandler(&htim2);
+
-    }
+void api_hal_interrupt_init() {
+    NVIC_SetPriority(DMA1_Channel1_IRQn, NVIC_EncodePriority(NVIC_GetPriorityGrouping(), 5, 0));
+    NVIC_EnableIRQ(DMA1_Channel1_IRQn);
 }
 
-void api_hal_interrupt_set_timer_isr(TIM_TypeDef *timer, ApiHalInterruptISR isr) {
+void api_hal_interrupt_set_timer_isr(TIM_TypeDef* timer, ApiHalInterruptISR isr) {
     if (timer == TIM2) {
         if (isr) {
             furi_assert(api_hal_tim_tim2_isr == NULL);
@@ -27,6 +29,19 @@ void api_hal_interrupt_set_timer_isr(TIM_TypeDef *timer, ApiHalInterruptISR isr)
     }
 }
 
+void api_hal_interrupt_set_dma_channel_isr(DMA_TypeDef* dma, uint32_t channel, ApiHalInterruptISR isr) {
+    --channel; // Pascal 
+    furi_check(dma);
+    furi_check(channel < API_HAL_INTERRUPT_DMA_CHANNELS_COUNT);
+    if (dma == DMA1) {
+        api_hal_dma_channel_isr[0][channel] = isr;
+    } else if (dma == DMA1) {
+        api_hal_dma_channel_isr[1][channel] = isr;
+    } else {
+        furi_check(0);
+    }
+}
+
 extern void api_interrupt_call(InterruptType type, void* hw);
 
 /* ST HAL symbols */
@@ -40,3 +55,78 @@ void HAL_COMP_TriggerCallback(COMP_HandleTypeDef* hcomp) {
 void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef* htim) {
     api_interrupt_call(InterruptTypeTimerUpdate, htim);
 }
+
+/* Timer 2 */
+void TIM2_IRQHandler(void) {
+    if (api_hal_tim_tim2_isr) {
+        api_hal_tim_tim2_isr();
+    } else {
+        HAL_TIM_IRQHandler(&htim2);
+    }
+}
+
+/* DMA 1 */
+void DMA1_Channel1_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[0][0]) api_hal_dma_channel_isr[0][0]();
+}
+
+void DMA1_Channel2_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[0][1]) api_hal_dma_channel_isr[0][1]();
+}
+
+void DMA1_Channel3_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[0][2]) api_hal_dma_channel_isr[0][2]();
+}
+
+void DMA1_Channel4_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[0][3]) api_hal_dma_channel_isr[0][3]();
+}
+
+void DMA1_Channel5_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[0][4]) api_hal_dma_channel_isr[0][4]();
+}
+
+void DMA1_Channel6_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[0][5]) api_hal_dma_channel_isr[0][5]();
+}
+
+void DMA1_Channel7_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[0][6]) api_hal_dma_channel_isr[0][6]();
+}
+
+void DMA1_Channel8_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[0][7]) api_hal_dma_channel_isr[0][7]();
+}
+
+/* DMA 2 */
+void DMA2_Channel1_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[1][0]) api_hal_dma_channel_isr[1][0]();
+}
+
+void DMA2_Channel2_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[1][1]) api_hal_dma_channel_isr[1][1]();
+}
+
+void DMA2_Channel3_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[1][2]) api_hal_dma_channel_isr[1][2]();
+}
+
+void DMA2_Channel4_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[1][3]) api_hal_dma_channel_isr[1][3]();
+}
+
+void DMA2_Channel5_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[1][4]) api_hal_dma_channel_isr[1][4]();
+}
+
+void DMA2_Channel6_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[1][5]) api_hal_dma_channel_isr[1][5]();
+}
+
+void DMA2_Channel7_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[1][6]) api_hal_dma_channel_isr[1][6]();
+}
+
+void DMA2_Channel8_IRQHandler(void) {
+    if (api_hal_dma_channel_isr[1][7]) api_hal_dma_channel_isr[1][7]();
+}

firmware/targets/f6/api-hal/api-hal-interrupt.h

@@ -9,11 +9,22 @@ extern "C" {
 /** Timer ISR */
 typedef void (*ApiHalInterruptISR)();
 
+/** Initialize interrupt subsystem */
+void api_hal_interrupt_init();
+
+/** Set DMA Channel ISR
+ * We don't clear interrupt flags for you, do it by your self.
+ * @param dma - DMA instance
+ * @param channel - DMA channel
+ * @param isr - your interrupt service routine or use NULL to clear
+ */
+void api_hal_interrupt_set_dma_channel_isr(DMA_TypeDef* dma, uint32_t channel, ApiHalInterruptISR isr);
+
 /** Set Timer ISR
  * By default ISR is serviced by ST HAL. Use this function to override it.
  * We don't clear interrupt flags for you, do it by your self.
- * @timer - timer instance
+ * @param timer - timer instance
- * @isr - your interrupt service routine or use NULL to clear
+ * @param isr - your interrupt service routine or use NULL to clear
  */
 void api_hal_interrupt_set_timer_isr(TIM_TypeDef *timer, ApiHalInterruptISR isr);
 

firmware/targets/f6/api-hal/api-hal-subghz.c

@@ -9,6 +9,8 @@
 #include <cc1101.h>
 #include <stdio.h>
 
+static volatile SubGhzState api_hal_subghz_state = SubGhzStateInit;
+
 static const uint8_t api_hal_subghz_preset_ook_async_regs[][2] = {
     /* Base setting */
     { CC1101_IOCFG0,    0x0D }, // GD0 as async serial data output/input
@@ -24,7 +26,7 @@ static const uint8_t api_hal_subghz_preset_ook_async_regs[][2] = {
 };
 
 static const uint8_t api_hal_subghz_preset_ook_async_patable[8] = {
-    0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    0x00, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
 static const uint8_t api_hal_subghz_preset_mp_regs[][2] = {
@@ -63,7 +65,7 @@ static const uint8_t api_hal_subghz_preset_mp_regs[][2] = {
 };
 
 static const uint8_t api_hal_subghz_preset_mp_patable[8] = {
-    0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    0x00, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
 };
 
 static const uint8_t api_hal_subghz_preset_2fsk_packet_regs[][2] = {
@@ -85,9 +87,19 @@ static const uint8_t api_hal_subghz_preset_2fsk_packet_patable[8] = {
 };
 
 void api_hal_subghz_init() {
+    furi_assert(api_hal_subghz_state == SubGhzStateInit);
+    api_hal_subghz_state = SubGhzStateIdle;
+
     const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
-    // Reset and shutdown
+
+#ifdef API_HAL_SUBGHZ_TX_GPIO
+    hal_gpio_init(&API_HAL_SUBGHZ_TX_GPIO, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
+#endif
+
+    // Reset
+    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
     cc1101_reset(device);
+    cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHighImpedance);
 
     // Prepare GD0 for power on self test
     hal_gpio_init(&gpio_cc1101_g0, GpioModeInput, GpioPullNo, GpioSpeedLow);
@@ -108,8 +120,23 @@ void api_hal_subghz_init() {
     hal_gpio_init(&gpio_rf_sw_0, GpioModeOutputPushPull, GpioPullNo, GpioSpeedLow);
     cc1101_write_reg(device, CC1101_IOCFG2, CC1101IocfgHW);
 
-    // Turn off oscillator
+    // Go to sleep
     cc1101_shutdown(device);
+
+    api_hal_spi_device_return(device);
+}
+
+void api_hal_subghz_sleep() {
+    furi_assert(api_hal_subghz_state == SubGhzStateIdle);
+    const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
+
+    cc1101_switch_to_idle(device);
+
+    cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHighImpedance);
+    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
+
+    cc1101_shutdown(device);
+
     api_hal_spi_device_return(device);
 }
 
@@ -189,7 +216,10 @@ void api_hal_subghz_shutdown() {
 
 void api_hal_subghz_reset() {
     const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
+    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
+    cc1101_switch_to_idle(device);
     cc1101_reset(device);
+    cc1101_write_reg(device, CC1101_IOCFG0, CC1101IocfgHighImpedance);
     api_hal_spi_device_return(device);
 }
 
@@ -207,7 +237,6 @@ void api_hal_subghz_rx() {
 
 void api_hal_subghz_tx() {
     const ApiHalSpiDevice* device = api_hal_spi_device_get(ApiHalSpiDeviceIdSubGhz);
-    cc1101_switch_to_idle(device);
     cc1101_switch_to_tx(device);
     api_hal_spi_device_return(device);
 }
@@ -281,11 +310,6 @@ volatile uint32_t api_hal_subghz_capture_delta_duration = 0;
 volatile ApiHalSubGhzCaptureCallback api_hal_subghz_capture_callback = NULL;
 volatile void* api_hal_subghz_capture_callback_context = NULL;
 
-void api_hal_subghz_set_capture_callback(ApiHalSubGhzCaptureCallback callback, void* context) {
-    api_hal_subghz_capture_callback = callback;
-    api_hal_subghz_capture_callback_context = context;
-}
-
 static void api_hal_subghz_capture_ISR() {
     // Channel 1
     if(LL_TIM_IsActiveFlag_CC1(TIM2)) {
@@ -308,10 +332,14 @@ static void api_hal_subghz_capture_ISR() {
     }
 }
 
-void api_hal_subghz_enable_capture() {
+void api_hal_subghz_set_async_rx_callback(ApiHalSubGhzCaptureCallback callback, void* context) {
-    /* Peripheral clock enable */
+    api_hal_subghz_capture_callback = callback;
-    LL_APB1_GRP1_EnableClock(LL_APB1_GRP1_PERIPH_TIM2);
+    api_hal_subghz_capture_callback_context = context;
-    LL_AHB2_GRP1_EnableClock(LL_AHB2_GRP1_PERIPH_GPIOA);
+}
+
+void api_hal_subghz_start_async_rx() {
+    furi_assert(api_hal_subghz_state == SubGhzStateIdle);
+    api_hal_subghz_state = SubGhzStateAsyncRx;
 
     hal_gpio_init_ex(&gpio_cc1101_g0, GpioModeAltFunctionPushPull, GpioPullNo, GpioSpeedLow, GpioAltFn1TIM2);
 
@@ -323,24 +351,27 @@ void api_hal_subghz_enable_capture() {
     TIM_InitStruct.ClockDivision = LL_TIM_CLOCKDIVISION_DIV1;
     LL_TIM_Init(TIM2, &TIM_InitStruct);
 
-    // Timer: advanced and channel
+    // Timer: advanced
     LL_TIM_SetClockSource(TIM2, LL_TIM_CLOCKSOURCE_INTERNAL);
     LL_TIM_DisableARRPreload(TIM2);
     LL_TIM_SetTriggerInput(TIM2, LL_TIM_TS_TI2FP2);
     LL_TIM_SetSlaveMode(TIM2, LL_TIM_SLAVEMODE_RESET);
-    LL_TIM_CC_DisableChannel(TIM2, LL_TIM_CHANNEL_CH2);
-    LL_TIM_IC_SetFilter(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_IC_FILTER_FDIV1);
-    LL_TIM_IC_SetPolarity(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_IC_POLARITY_RISING);
-    LL_TIM_DisableIT_TRIG(TIM2);
-    LL_TIM_DisableDMAReq_TRIG(TIM2);
     LL_TIM_SetTriggerOutput(TIM2, LL_TIM_TRGO_RESET);
     LL_TIM_EnableMasterSlaveMode(TIM2);
+    LL_TIM_DisableDMAReq_TRIG(TIM2);
+    LL_TIM_DisableIT_TRIG(TIM2);
+
+    // Timer: channel 1 indirect
     LL_TIM_IC_SetActiveInput(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_ACTIVEINPUT_INDIRECTTI);
     LL_TIM_IC_SetPrescaler(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_ICPSC_DIV1);
-    LL_TIM_IC_SetFilter(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_IC_FILTER_FDIV1);
     LL_TIM_IC_SetPolarity(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_IC_POLARITY_FALLING);
+    LL_TIM_IC_SetFilter(TIM2, LL_TIM_CHANNEL_CH1, LL_TIM_IC_FILTER_FDIV1);
+
+    // Timer: channel 2 direct
     LL_TIM_IC_SetActiveInput(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_ACTIVEINPUT_DIRECTTI);
     LL_TIM_IC_SetPrescaler(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_ICPSC_DIV1);
+    LL_TIM_IC_SetPolarity(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_IC_POLARITY_RISING);
+    LL_TIM_IC_SetFilter(TIM2, LL_TIM_CHANNEL_CH2, LL_TIM_IC_FILTER_FDIV1);
 
     // ISR setup
     api_hal_interrupt_set_timer_isr(TIM2, api_hal_subghz_capture_ISR);
@@ -356,10 +387,132 @@ void api_hal_subghz_enable_capture() {
     // Start timer
     LL_TIM_SetCounter(TIM2, 0);
     LL_TIM_EnableCounter(TIM2);
+
+    // Switch to RX
+    api_hal_subghz_rx();
 }
 
-void api_hal_subghz_disable_capture() {
+void api_hal_subghz_stop_async_rx() {
+    furi_assert(api_hal_subghz_state == SubGhzStateAsyncRx);
+    api_hal_subghz_state = SubGhzStateIdle;
+
+    // Shutdown radio
+    api_hal_subghz_idle();
+
     LL_TIM_DeInit(TIM2);
     api_hal_interrupt_set_timer_isr(TIM2, NULL);
+
+    hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
+}
+
+volatile size_t api_hal_subghz_tx_repeat = 0;
+
+static void api_hal_subghz_tx_dma_isr() {
+    if (LL_DMA_IsActiveFlag_TC1(DMA1)) {
+        LL_DMA_ClearFlag_TC1(DMA1);
+        furi_assert(api_hal_subghz_state == SubGhzStateAsyncTx);
+        if (--api_hal_subghz_tx_repeat == 0) {
+            api_hal_subghz_state = SubGhzStateAsyncTxLast;
+            LL_DMA_DisableChannel(DMA1, LL_DMA_CHANNEL_1);
+        }
+    }
+}
+
+static void api_hal_subghz_tx_timer_isr() {
+    if(LL_TIM_IsActiveFlag_UPDATE(TIM2)) {
+        LL_TIM_ClearFlag_UPDATE(TIM2);
+        if (api_hal_subghz_state == SubGhzStateAsyncTxLast) {
+            LL_TIM_DisableCounter(TIM2);
+            api_hal_subghz_state = SubGhzStateAsyncTxEnd;
+        }
+    }
+}
+
+void api_hal_subghz_start_async_tx(uint32_t* buffer, size_t buffer_size, size_t repeat) {
+    furi_assert(api_hal_subghz_state == SubGhzStateIdle);
+    api_hal_subghz_state = SubGhzStateAsyncTx;
+    api_hal_subghz_tx_repeat = repeat;
+
+    // Connect CC1101_GD0 to TIM2 as output
+    hal_gpio_init_ex(&gpio_cc1101_g0, GpioModeAltFunctionPushPull, GpioPullDown, GpioSpeedLow, GpioAltFn1TIM2);
+
+    // Configure DMA
+    LL_DMA_InitTypeDef dma_config = {0};
+    dma_config.PeriphOrM2MSrcAddress = (uint32_t)&(TIM2->ARR);
+    dma_config.MemoryOrM2MDstAddress = (uint32_t)buffer;
+    dma_config.Direction = LL_DMA_DIRECTION_MEMORY_TO_PERIPH;
+    dma_config.Mode = LL_DMA_MODE_CIRCULAR;
+    dma_config.PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT;
+    dma_config.MemoryOrM2MDstIncMode = LL_DMA_MEMORY_INCREMENT;
+    dma_config.PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_WORD;
+    dma_config.MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_WORD;
+    dma_config.NbData = buffer_size / sizeof(uint32_t);
+    dma_config.PeriphRequest = LL_DMAMUX_REQ_TIM2_UP;
+    dma_config.Priority = LL_DMA_MODE_NORMAL;
+    LL_DMA_Init(DMA1, LL_DMA_CHANNEL_1, &dma_config);
+    api_hal_interrupt_set_dma_channel_isr(DMA1, LL_DMA_CHANNEL_1, api_hal_subghz_tx_dma_isr);
+    LL_DMA_EnableIT_TC(DMA1, LL_DMA_CHANNEL_1);
+    LL_DMA_EnableChannel(DMA1, LL_DMA_CHANNEL_1);
+
+    // Configure TIM2
+    LL_TIM_InitTypeDef TIM_InitStruct = {0};
+    TIM_InitStruct.Prescaler = 64-1;
+    TIM_InitStruct.CounterMode = LL_TIM_COUNTERMODE_UP;
+    TIM_InitStruct.Autoreload = 1000;
+    TIM_InitStruct.ClockDivision = LL_TIM_CLOCKDIVISION_DIV1;
+    LL_TIM_Init(TIM2, &TIM_InitStruct);
+    LL_TIM_SetClockSource(TIM2, LL_TIM_CLOCKSOURCE_INTERNAL);
+    LL_TIM_EnableARRPreload(TIM2);
+
+    // Configure TIM2 CH2
+    LL_TIM_OC_InitTypeDef TIM_OC_InitStruct = {0};
+    TIM_OC_InitStruct.OCMode = LL_TIM_OCMODE_TOGGLE;
+    TIM_OC_InitStruct.OCState = LL_TIM_OCSTATE_DISABLE;
+    TIM_OC_InitStruct.OCNState = LL_TIM_OCSTATE_DISABLE;
+    TIM_OC_InitStruct.CompareValue = 0;
+    TIM_OC_InitStruct.OCPolarity = LL_TIM_OCPOLARITY_HIGH;
+    LL_TIM_OC_Init(TIM2, LL_TIM_CHANNEL_CH2, &TIM_OC_InitStruct);
+    LL_TIM_OC_DisableFast(TIM2, LL_TIM_CHANNEL_CH2);
+    LL_TIM_DisableMasterSlaveMode(TIM2);
+
+    api_hal_interrupt_set_timer_isr(TIM2, api_hal_subghz_tx_timer_isr);
+    LL_TIM_EnableIT_UPDATE(TIM2);
+    LL_TIM_EnableDMAReq_UPDATE(TIM2);
+    LL_TIM_CC_EnableChannel(TIM2, LL_TIM_CHANNEL_CH2);
+
+    // Start counter
+    LL_TIM_GenerateEvent_UPDATE(TIM2);
+#ifdef API_HAL_SUBGHZ_TX_GPIO
+    hal_gpio_write(&API_HAL_SUBGHZ_TX_GPIO, true);
+#endif
+    api_hal_subghz_tx();
+
+    LL_TIM_SetCounter(TIM2, 0);
+    LL_TIM_EnableCounter(TIM2);
+}
+
+void api_hal_subghz_wait_async_tx() {
+    while(api_hal_subghz_state != SubGhzStateAsyncTxEnd) osDelay(1);
+}
+
+void api_hal_subghz_stop_async_tx() {
+    furi_assert(api_hal_subghz_state == SubGhzStateAsyncTxEnd);
+    api_hal_subghz_state = SubGhzStateIdle;
+
+    // Shutdown radio
+    api_hal_subghz_idle();
+#ifdef API_HAL_SUBGHZ_TX_GPIO
+    hal_gpio_write(&API_HAL_SUBGHZ_TX_GPIO, false);
+#endif
+
+    // Deinitialize Timer
+    LL_TIM_DeInit(TIM2);
+    api_hal_interrupt_set_timer_isr(TIM2, NULL);
+
+    // Deinitialize DMA
+    LL_DMA_DeInit(DMA1, LL_DMA_CHANNEL_1);
+    api_hal_interrupt_set_dma_channel_isr(DMA1, LL_DMA_CHANNEL_1, NULL);
+
+    // Deinitialize GPIO
     hal_gpio_init(&gpio_cc1101_g0, GpioModeAnalog, GpioPullNo, GpioSpeedLow);
 }

firmware/targets/f6/api-hal/api-hal.c

@@ -3,6 +3,10 @@
 void api_hal_init() {
     api_hal_boot_init();
     FURI_LOG_I("FURI_HAL", "BOOT OK");
+    api_hal_interrupt_init();
+    FURI_LOG_I("FURI_HAL", "INTERRUPT OK");
+    api_hal_clock_init();
+    FURI_LOG_I("FURI_HAL", "CLOCK OK");
     api_hal_version_init();
     FURI_LOG_I("FURI_HAL", "VERSION OK");
     api_hal_delay_init();

firmware/targets/f6/target.mk

@@ -19,6 +19,11 @@ ifeq ($(API_HAL_OS_DEBUG), 1)
 CFLAGS			+= -DAPI_HAL_OS_DEBUG
 endif
 
+API_HAL_SUBGHZ_TX_GPIO ?= 0
+ifneq ($(API_HAL_SUBGHZ_TX_GPIO), 0)
+CFLAGS			+= -DAPI_HAL_SUBGHZ_TX_GPIO=$(API_HAL_SUBGHZ_TX_GPIO)
+endif
+
 ifeq ($(INVERT_RFID_IN), 1)
 CFLAGS += -DINVERT_RFID_IN
 endif
@@ -46,8 +51,6 @@ C_SOURCES		+= \
 	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cryp.c \
 	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_crc.c \
 	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_crc_ex.c \
-	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma.c \
-	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_dma_ex.c \
 	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c \
 	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash.c \
 	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_flash_ex.c \
@@ -72,6 +75,7 @@ C_SOURCES		+= \
 	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_uart_ex.c \
 	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_lptim.c \
 	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c \
+	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_dma.c \
 	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_gpio.c \
 	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_i2c.c \
 	$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rcc.c \

lib/drivers/cc1101.c

@@ -145,7 +145,7 @@ void cc1101_set_pa_table(const ApiHalSpiDevice* device, const uint8_t value[8])
 
     hal_gpio_write(device->chip_select, false);
     while(hal_gpio_read(device->bus->miso));
-    api_hal_spi_bus_trx(device->bus, tx, (uint8_t*)rx, 2, CC1101_TIMEOUT);
+    api_hal_spi_bus_trx(device->bus, tx, (uint8_t*)rx, sizeof(rx), CC1101_TIMEOUT);
     hal_gpio_write(device->chip_select, true);
 
     assert((rx[0].CHIP_RDYn|rx[8].CHIP_RDYn) == 0);