add hardware specifications

This commit is contained in:
aanper 2020-08-02 08:36:22 +03:00
parent 44d403573b
commit cff6b11278
2 changed files with 94 additions and 0 deletions

View File

@ -22,6 +22,8 @@ Forum: [forum.flipperzero.one](https://forum.flipperzero.one/)
## Hardware
[Hardware specification](wiki/hw.md)
* [Version 1.0](wiki/hw-1.0.md)
* In progress Version 1.1

92
wiki/hw.md Normal file
View File

@ -0,0 +1,92 @@
### Display
* Monochrome LCD
* Resolution: 128х64px
* Diagonal: 1.4”
* Orange LED backlight
### LED
RGB LED
### Control
* 5-button joystick
* Back button
* Reboot — Back+Left buttons for 2 seconds
### MCU
* ARM® Cortex®-M4
* 80MHz
* 1MB (1M x 8) FLASH
### Sub-1 GHz Range
* TX/RX
* Frequency: 433/434/315/868 Mhz
* Modulation: FM/AM
* Operate modes: Sniffer/Jammer/Emulator
### USB
* 1x USB 2.0 port
* Charging
* Firmware flashing
* User Arduino sketches flashing (must not break normal system behaviour)
### GPIO
* 0.65mm Female Header Connectors with 2.54 pitch
* x12+ — Data pins / 5V tolerant
* 2x — GND
* 1x — 3.3V
* 1x — 5V
### 125 khz RFID
* Supported protocols: EM-4100, HID Prox
* Operate modes: Reader/Writer/Emulator
### iButton 1-Wire
* Supported protocols: Dallas DS1990A, Cyphral, Metakom
* Operate modes: Reader/Writer/Emulator
### InfraRed
* Supported frequency: 36-40 kHz
* Operate modes: Reader/Emulator
### Bluetooth
* Bluetooth Low Energy 4.0+
* Firmware flashing
* Data transfer from/to the app
### NFC
* Supported protocols: Mifare
* Operate modes: Reader/Emulator/Sniffer
### Vibro
* Type: Coin motor
* RPM: ≥10000
### Speaker
* Type: Coin
### Power and battery
* Built-in not removable lithiumion battery 2000mAh
* USB charging 5V, 500-2000mA
* ≥10 days standby
### Physical
* Materials: PC
* Weight: <200g
* Size: ~98х40х22mm
* Operating temperature: 0 ~ 50 °C