* SubGhz: add new method of obtaining a manufactory code subghz_protocol_keeloq_common_magic_xor_type1_learning
* TextInput: checking for a lock on a file with the same name
* TextInput: fix checking for a lock on a file with the same name
* Assets: rename and recompile
* TextInput: added picture and timer to turn off blob
* TextInput: Fix graphics
* TextInput: fix validator
* Validators: Add validator is file
* TextInput: fix callback validator_is_file_alloc
* SubGhz: add propocol GNS (dimamic), Beninca/Alcatic, Elmes
* SubGhz: fix function description
* Gui: correct timer routine on deallocation
* Format sources
Co-authored-by: あく <alleteam@gmail.com>
* U2F: new gui
* U2F: user cert key encryption
* FuriCore: move type casting to dangerous_defines
* FuriCore: exclude dangerous things from furi.h
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* [FL-2051] BadUsb: new GUI
* add missing assets
* skip empty lines and leading spaces
* SubGhz: add alignment check to keystore mess with iv routine
Co-authored-by: あく <alleteam@gmail.com>
* Update protobuf
* Send ping data back
* Add check for has_next, more readability
* Fix nullptr dereference
Co-authored-by: Tony Freeman <tonyfreeman@users.noreply.github.com>
Co-authored-by: Albert Kharisov <albkharisov@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* USB-UART: new gui
* Furi: use furi_console for logging instead of printf.
* CDC: calling open/close callbacks on interface change
* fix vcp_tx block on disconnect
* USB mode set by struct pointer
* FuriHal: proper event sequence on vcp reconnect
* disable debug prints
* HAL: add context to UART IRQ's
* Context usage in UART IRQ and CDC callbacks
* USB-UART: geting rid of baudrate limitations
* FuriHal: remove struct pollutant in usb api.
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* Add correct key-reading asset
* IRDA: correct NEC42ext displaying
* IRDA App: correct vibro
There are no double vibro, but 1 vibro for any successful
new signal read, and 1 for sending just read signal.
Co-authored-by: あく <alleteam@gmail.com>
- RPC: added CLI command to start session - all input bytes goes into RPC, all RPC output goes into VCP
- RPC: added command to close session (actually it only notifies transport layer)
- RPC: added recursive rmdir
- RPC: hard-coded listing for root directory (any, ext, int)
- Fixed CLI leak
- Fixed furi_record_delete leak
- Unit tests: repaired
- Unit tests: corrected output - remove excess, change dots with progress spinner
- Unit tests: added leak check
- Unit tests: SD mount check before start
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* assets: add new ble assets
* bt: update pairing screen with new icon
* bt: add bt status and update status bar
* bt: update statusbar width from thread
* Icons: new BT icon
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* RPC: Add App start, lock status
- Add RPC commands Application start, lock status acquiring.
- Write tests for RPC App system.
- Replace Unit Tests application with CLI command. This is for CI needs and for tests that run application.
* Fix NDEBUG build
* Update PB submodule
* Fix RPC print (ENABLE DEBUG PRINT!)
* snprintf -> string_t
* Fix Hard Fault (early mutex free)
* printf -> string_t, format, enable tests
* Update submodule: protobuf
* Applications: rollback unit test naming scheme.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* ToolBox: add manchester-decoder and manchester-encoder
* SubGhz: add new FM config cc1101
* Subghz: add protocol Kia
* SubGhz: fix receiving the last packet Nero Radio
* SubGhz: app protocol CAME Twin (TW2EE/TW4EE)
* SubGhz: add protocol CAME Atomo (AT03EV/ AT04EV)
* F7: sync with F6
* SubGhz: add frequency analyzer
* SubGhz: remove space from file name
* SubGhz: frequency analyzer add filter and fix view
* [FL-1939] GubGhz: Frequency analyzer redesign
* SubGhz: fix incorrect subghz api call sequence in frequency analyzer worker
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* settings power: introduce power settings app
* power: move power API to separate file
* settings power: implement reboot scene
* settings power: add power off scene
* assets: add crying dolphin, fix Subghz assets names
* settings power: fix power off scene GUI
* settings power: add battery info scene
* power: add cli to application on start hook
* power: remove power from main menu
* power: move to power service folder
* power service: rework power off logic
* power: add pubsub events
* bt: subscribe to battery level change, update characteristic
* application: change order of Settings applications
* gui: add bubble element
* power: gui improvements
* application: rename Notification -> LCD and notifications
* Applications: menu order according to documentation and add missing power cli init
* settings power: add disconnect USB scene
* power cli: notify user to disconnect USB after poweroff
* Power: update poweroff message in cli
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Gui: move rotation logic to ViewPort, replace delayed View switch in ViewDispatcher with event filtering and redirection to previous view.
* SubGhz: add function description
* Gui, Input: add event id to input events.
* SubGhz: fix "crashing on ?"
* SubGhz: add icon scanning
* SubGhz: updated interface read scene, updated interface config scene
* Assets: update subghz assets
* SubGhz: replaced the picture in the read scene, changed the paths to additional files
* SubGhz: fix deadlock in timer callback
* SubGhz: fix icon read scene
* SubGhz: fix icon read scene
* SubGhz: fix duble text transmitter scene
* SubGhz: correct spelling. Gui: bigger queue for ViewDispatcher.
* SubGhz: fix creation and transmission of dynamic code without the presence of a manufactory key
* SubGhz: fix keelog, setting a name in the absence of a manufactory key
* SubGhz: fix load bad keelog key
* Format sources
* Furi: remove garbage from core. GpioTester: fix memory leak and cleanup
* Accessor: remove obsolete notification code
* MusicPlayer: remove input event injection
* Input: rename id to sequence
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: Add millis() furi, add subghz history struct
* SubGhz: Fix subghz history
* Gubghz: Fix code repeat history, add clean history
* SubGhz: reading and adding keys to history
* Gui: Renaming Sub 1-Ghz -> SubGhz
* Archive: Renaming Sub 1-Ghz -> SubGhz
* SubGhz: Add menu history, modified button for sending a signal, changed output of data about accepted protocol
* Archive: Fix name subghz
* SubGhz: Menu navigation
* Assets: Add assets/SubGHz/icon.png
* Assets: add new icons for subghz
* SubGhz: Fix name Add manually scene
* SubGhz: Fix load icon Read scene. rename encoder struct, rename protocol function load from file, add load raw data protocol, add info pleasant signals all protocol
* SubGhz: fix memory leak
* SubGhz: change of receiving frequency for read scene
* SubGhz: Add save/load frequency and preset, add automatic configuration of transmit/receive to the desired frequency and modulation, add button "save" config scene
* SubGhz: Fix frequency and preset, fix frequency add manualli scene, fix re-executing the parser
* Furi-hal-subghz: add 2-FSK config, fix ook config 650KHz BW Tx filter
* Fix formatting and release build
* SubGhz: Delete read scene
* SubGhz: Fix frequency add manualli scene, refactoring code
* SubGhz: 2 profiles for OOK, fix broken build.
* SubGhz: Add passing static codes from read scene, add notification read scene, refactoring code
* SubGhz: fix assert on worker double stop.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* assets: add EMV AID table for NFC app
* file-worker: add searching for value by the key
* nfc: add emv parser helpers
* assets: add country and currency codes
* nfc: add country and currency code parsing
* emv_decoder: add country and currency code support
* nfc: add AID. currency and country display
* nfc: rework bank_card view
* nfc: add currency and country save
* assets: change emv chip asset
* nfc: change asset in bank card
* gui: add frame element to widget
* nfc: add bank card frame, add documentation
* rfal: fix long APDU command emulation
* nfc: fix typos
* Scripts ReadMe: assets delivery command
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* FuriHal: port spi to ll. Bootloader: add spi and display.
* Makefile: rollback disabled freertos introspection
* FuriHal: spi lock asserts. F6: minor cleanup port sdcard shenanigans to furi_hal_gpio.
* SdCard: port missing bits to furi-hal-gpio
* FuriHal: fix broken RX in SPI, update SPI API usage. RFAL: more asserts in SPI platform code.
* GUI: clear canvas on start. FuriHal: no pullup on radio spi bus.
* FuriHal: use check instead of assert in spi lock routines
* FuriHal: remove timeouts
* SdHal: add guard time to SDCARD CS PIN control.
* FuriHal: proper name for SPI device reconfigure routine. SdHal: one more enterprise delay and better documentation.
* Bootloader: update DFU text and add image.
* FuriHal: drop unused ST HAL modules.
* SdHal: fixed swapped hal_gpio_init_ex arguments
* SpiHal: fixed swapped hal_gpio_init_ex arguments
* IrdaHal: use hal_gpio_init instead of hal_gpio_init_ex
* RfidHal: fixed swapped hal_gpio_init_ex arguments
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* FS-Api: removed datetime manipulation functions and most of the file flags
* Filesystem: common proxy api
* Filesystem: renamed to Storage. Work has begun on a glue layer. Added functions for reentrance.
* Storage: sd mount and sd file open
* Storage: sd file close
* Storage: temporary test app
* Storage: free filedata on close
* Storage: sd file read and write
* Storage: added internal storage (LittleFS)
* Storage: renamed internal commands
* Storage: seek, tell, truncate, size, sync, eof
* Storage: error descriptions
* Storage: directory management api (open, close, read, rewind)
* Storage: common management api (stat, fs_stat, remove, rename, mkdir)
* Dolphin app and Notifications app now use raw storage.
* Storage: storage statuses renamed. Implemented sd card icon.
* Storage: added raw sd-card api.
* Storage settings: work started
* Assets: use new icons approach
* Storage settings: working storage settings
* Storage: completely redesigned api, no longer sticking out FS_Api
* Storage: more simplified api, getting error_id from file is hidden from user, pointer to api is hidden inside file
* Storage: cli info and format commands
* Storage-cli: file list
* Storage: a simpler and more reliable api
* FatFS: slightly lighter and faster config. Also disabled reentrancy and file locking functions. They moved to a storage service.
* Storage-cli: accommodate to the new cli api.
* Storage: filesystem api is separated into internal and common api.
* Cli: added the ability to print the list of free heap blocks
* Storage: uses a list instead of an array to store the StorageFile. Rewrote api calls to use semaphores instead of thread flags.
* Storage settings: added the ability to benchmark the SD card.
* Gui module file select: uses new storage api
* Apps: removed deprecated sd_card_test application
* Args lib: support for enquoted arguments
* Dialogs: a new gui app for simple non-asynchronous apps
* Dialogs: view holder for easy single view work
* File worker: use new storage api
* IButton and lfrrfid apps: save keys to any storage
* Apps: fix ibutton and lfrfid stack, remove sd_card_test.
* SD filesystem: app removed
* File worker: fixed api pointer type
* Subghz: loading assets using the new storage api
* NFC: use the new storage api
* Dialogs: the better api for the message element
* Archive: use new storage api
* Irda: changed assest path, changed app path
* FileWorker: removed unused file_buf_cnt
* Storage: copying and renaming files now works between storages
* Storage cli: read, copy, remove, rename commands
* Archive: removed commented code
* Storage cli: write command
* Applications: add SRV_STORAGE and SRV_DIALOGS
* Internal-storage: removed
* Storage: improved api
* Storage app: changed api pointer from StorageApp to Storage
* Storage: better file_id handling
* Storage: more consistent errors
* Loader: support for NULL icons
* Storage: do nothing with the lfs file or directory if it is not open
* Storage: fix typo
* Storage: minor float usage cleanup, rename some symbols.
* Storage: compact doxygen comments.
Co-authored-by: あく <alleteam@gmail.com>
* GUI: Icons and IconsAnimation refactoring. Switch assets to new Icon API.
* Gui: icon and animation draw now do not accept null pointer
* Format Sources
* Fix no debug build
* Furi: stricter checks in memmgr
* Gui module byte-input: changed api
* Gui: changed font height in multiline text according to guideline
* Apps lrfid, nfc: changed send and receive icon
* App lfrfid: fix text, fix scene switсh
* Elements: multiline text framed, fix paddings
* Gui: remove duplicate definition of elements_multiline_text_framed
* App NFC: update byte_input callback signature
* App subghz: fix text lines in capture scene
* App subghz: position of the text is aligned with the guidelines and other scenes
* App subghz: removed mockup
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Assets: move assets compilation to separate Makefile. Move all scripts to scripts folder. Add scripts ReadMe. Add precompiled assets.
* Split assets.py into separate entities. Option bytes for FL-1289 and checker/setter.
* Cli: explicitly initialize variable befor use in api_hal_vcp_rx_with_timeout
* Rename ob_check script to ob.
