あく
3a6fbff8c3
FL-339: cli diagnostic interface for power subsystem. ( #256 )
...
* Core, API: add externs for c++
* Makefile: improve debug speed, flash with openocd, cleanup f2 config
* Power: add cli diagnostic.
* Local: fix api hal externs
* Local: fix externs in main and flipper_hal
* F2: power state dump stabs
* Bootloader flashing with openocd
* F3: move bq drivers to libs
* temporary do not build drivers on local
* temporary do not build drivers on f2
Co-authored-by: aanper <mail@s3f.ru>
2020-12-02 13:47:13 +03:00
DrZlo13
1f761d7fbb
[FL-84] iButton app, dallas emulate + cyfral read, cyfral emulate ( #253 )
...
* maxim crc function
* one wire template device and ds1990 classes
* 3 fields for addr
* cyfral emulator lib
* add cyfral read mode, refract rendering and events
* add ADC1_IN14, add adc interrupt
* cyfral read mode
* rename and move api-hal includes folder
* build onewire libs only if we build app
* start in mode 0
2020-11-25 10:25:13 +03:00
coreglitch
ccd40497eb
FL-176 LF RFID RX ( #248 )
...
* pulldown ibutton pin during rfid read
* enable and handle COMP interrupts
* send events from comparator IRQ and handle in app
* manchester encode
* successfully read em4100
* read-emulate
* led
2020-11-19 14:11:03 +03:00
あく
3749eb0eed
USB VCP Cli ( #237 )
...
* Core: ring buffer.
* Api: usb vcp. F3: vcp glue code.
* Applications: cli draft version.
* Cli: basic working version, includes help and version commands
* HAL: vcp on f2
* Makefile: update openocd conf
* F3: vcp rx with freertos stream
* Cli: help
* Cli: standard commands, api-hal-uid
* Power: cli poweroff.
2020-11-16 13:16:34 +03:00
coreglitch
a61eef0f99
FL-186 Add vibro demo ( #234 )
...
* add vibro demo
* add F2 support
2020-11-12 22:26:49 +03:00
DrZlo13
9d8c36810e
IR RX simple app ( #218 )
...
* split falling and rising ir rx events
* fix irda
* simple irda rx function for app
* add extern timer
* fix timer num for f2
2020-11-11 10:36:27 +03:00
あく
f05ffddbde
Power: bq25896 and bq27220 drivers, portable power api. ( #224 )
...
* Power: add portability layer, port to F3.
* F3: bq25896 driver stab
* GUI: new primary and secondary fonts
* F3: bq25896 register map, basic functions
* F3: move bq27220 command descritpion to separate file. Code format.
* Power: OTG enable/disable
* Power: choose more correct profile
* F3: pet bq25896 watchdog sometimes
2020-11-11 09:31:35 +03:00
あく
76e3fd3060
Firmware, Bootloader: add f3 target. ( #215 )
...
* Firmware, Bootloader: add f3 target. Refactor code to be portable across targets.
* Firmware: remove bkpt
* Makefile: debug agent. Debug: f3 platform throw openocd.
* freertos-openocd helper
* separate hal resources
* return of input_dump app
* using hew target resources abstration layer for backlight and blink
* dirty hack for input driver, f3 has no charging pin
* worked input interrupts
* working display
* F3: switch to 32mHz resonator
* F3: configure SD_CS pin
* NFC: port to F3.
* fat uart app
* sd card hal api
* separate CC1101 spi config
* faster spi gpio for sd card
* Assets: disable LFS
* Cube: disable css on LSE
* Input: format code
* Make: add bootloader source code to formatting rule
* F3: enable rf by default, adjust clock settings, map all pins where they should be.
* libs for coreglitch_demo_0
* nvic priority
* bus clocks all to 64
* lf-rfid timer and pin
* irda
* ir rx setup
* tim2 irq handler
* Makefile: environment aware mkdir
* Makefile, Irukagotchi: commit seq number.
* split falling and rising ir rx events
* Makefile: proper git branch detect on old git. Firmware: api fix.
* fix irda
* Makefile,Irukagotchi: date timestamp.
* NFC: adjust SPI speed
* Irukagotchi: format code
* Make: add blackmagic debug in host mode
* Makefile: detach blackmagic from terminal signals
* Makefile,Irukagotchi: stamp target
* add F3 bootloader/firmware to CI
Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
Co-authored-by: aanper <mail@s3f.ru>
2020-11-06 13:52:50 +03:00
