* ReadMe: update flashing scripts section
* Furi: add record exists method to record store.
* FuriHal: early OS init and i2c timeouts based on os ticks.
* Storage: replace malloc with furi_alloc, fix errors found by pvs.
* iButton: properly handle shutdown in cli search command
* SubGhz: proper argument type in sscanf and incorrect position of logging in switch.
* SubGhz: add vibration on input chat message, send joined/left events to room on start and exit app.
* SubGhz: optimize notification api usage
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* CLI: fix main GUI freeze while subghz chat is running
* CLI: fix processing backspace in the web console
* [FL-2086] SubGhz: fix can't save signals in sub'e to internal memory
* Cli: remove warning message in i2c command
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: add worker subghz_txrx
* SubGhz: added support for transferring Russian characters and support for backspace in CLI subghz_txrx
* SubGhz: refactoring subghz_txrx_worker, added a callback for accepting data in an empty one RX buffer
* SubGhz: fix conflict
* SubGhz: fix syntax errors
* Cli: document string_move usage and its behavior
* FuriHal: update subghz api and documentation. Subghz: move chat to subghz cli subcommand.
* Subghz: update text in chat cli
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Project: fix release build, replace asserts with checks.
* FuriHal: i2c refactoring, new bus access model, flexible bus gpio configuration.
* FuriHal: set i2c pins to high on detach.
* FuriHal: more i2c bus events, put bus under reset when not used, move bus enable/disable routine to bus handler.
* FuriHal: fix i2c deadlock in power api, add external i2c handle.
* Notification: add sequence_single_vibro
* SubGhz: optimizing the performance of the GUI ReadRAW
* SubGhz: full highlighting of the default filename on save
* SubGhz: add man Leopard, Faraon, Reff, ZX-750, Back_SL-B9, fix syntax
Co-authored-by: あく <alleteam@gmail.com>
* [FL-2051] BadUsb: new GUI
* add missing assets
* skip empty lines and leading spaces
* SubGhz: add alignment check to keystore mess with iv routine
Co-authored-by: あく <alleteam@gmail.com>
* Fix lock screen menu
* Fix pin setup in lock menu
* Desktop GUI layer on FS, black status bar
* Desktop: fix spelling
* Fix first start screen
* Fix status bar drawing
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: GUI RAW Read view
* SubGhz: GUI Read RAW refactoring
* SubGhz: fix bug wrong frequency of the allowed transmission
* GUI Read RAW refactoring
* SubGhz: fix set the default frequency
* SubGhz: fix save filename when returning from another menu
* SubGhz: fix Send and Back button behavior
Co-authored-by: あく <alleteam@gmail.com>
* Add snake game
* Applications: Added a classic game https://en.wikipedia.org/wiki/Snake_(video_game_genre)
* Snake Game: Making it impossible to lose button presses
* Use more native press button event
* Snake Game: use low level InputTypePress event instead of InputTypeShort high level unpredictable event
Co-authored-by: LionZXY <nikita@kulikof.ru>
Co-authored-by: あく <alleteam@gmail.com>
* Update protobuf
* Send ping data back
* Add check for has_next, more readability
* Fix nullptr dereference
Co-authored-by: Tony Freeman <tonyfreeman@users.noreply.github.com>
Co-authored-by: Albert Kharisov <albkharisov@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* USB-UART: new gui
* Furi: use furi_console for logging instead of printf.
* CDC: calling open/close callbacks on interface change
* fix vcp_tx block on disconnect
* USB mode set by struct pointer
* FuriHal: proper event sequence on vcp reconnect
* disable debug prints
* HAL: add context to UART IRQ's
* Context usage in UART IRQ and CDC callbacks
* USB-UART: geting rid of baudrate limitations
* FuriHal: remove struct pollutant in usb api.
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* Power: change power_off signature to match implementation
* Desktop: auto power off on first start screen and with ok button.
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* [FL-2010] furi-hal-vcp rework
* Fix connect state change on vcp enable
* New thread naming scheme and stack size adjustment.
* Applications: rename worker threads to match new naming scheme.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: add save key in flipper file format
* [FL-2005] SubGhz: fix stored signals cannot be deleted
* SubGhz: add load key in flipper file format
* SubGhz: fix syntax
* SubGhz: fix bad file upload
* Storage: add function to get the next free filename
* SubGhz: add save RAW in flipper file format
* SubGhz: add load RAW in flipper file format
* SubGhz: refactoring protocol
* SubGhz: refactoring scene
* SubGhz: fix SubGhzNotificationState define
* Makefile: proper comapre for FORCE
Co-authored-by: あく <alleteam@gmail.com>
* Toolbox: fix null pointer dereference in manchester decoder.
* FuriHal: use MPU to protect from null pointer dereference, replace flash driver with our own implementation.
* nfc: allocate nfc device on heap
* nfc: rework save with flipper file format
* nfc: rework nfc device load with flipper file
* nfc: save AID length and data
* nfc: remove file worker usage
* nfc: format sources
* nfc: rework with flipper file format addons
* assets: update EMV resources with flipper file format
* nfc: rework EMV resources parsing with new file format
* assets: fix EMV AID file format
* nfc: fix nfc_device usage
Co-authored-by: あく <alleteam@gmail.com>
* rpc: increase RPC buffer size. Add get available buffer size API
* bt: add flow control characteristic to serial service
* ble: change updating flow control characteristic logic
* rpc: add buffer is empty callback
* bt: add notification about empty RPC buffer
* ble: add more debug info
* serial_service: add mutex guarding available buffer size
* ble: remove debug logs in serial service
* SubGhz: add file with manufactory codes, and the ability to add your own manufactory codes for KeeLog
* SubGhz: add encrypt RAW data, add decrypt and get RAW data
* SubGhz: add encrypt magic_xor_atomo
* SubGhz: parsing atomo using file encrypt
* SubGhz: fix calculating the size of the read buffer
* SubGhz: parsing Nice FLOR S using file encrypt
* SubGhz: add file encrypt nice_flor_s_tx, fix name load file
* SubGhz: fix checking read buffer size
* Update subghz_keystore.c
* SubGhz: fix calculating the size of the read buffer
Co-authored-by: あく <alleteam@gmail.com>
* Add correct key-reading asset
* IRDA: correct NEC42ext displaying
* IRDA App: correct vibro
There are no double vibro, but 1 vibro for any successful
new signal read, and 1 for sending just read signal.
Co-authored-by: あく <alleteam@gmail.com>
