* FuriHal: SPI refactoring, flexible bus reconfigration on fly, same desiag as i2c.
* Lib: update CC1101 driver documentation
* FuriHal: update spi symbol names to match naming convention.
* Project: fix release build, replace asserts with checks.
* FuriHal: i2c refactoring, new bus access model, flexible bus gpio configuration.
* FuriHal: set i2c pins to high on detach.
* FuriHal: more i2c bus events, put bus under reset when not used, move bus enable/disable routine to bus handler.
* FuriHal: fix i2c deadlock in power api, add external i2c handle.
* FuriHal: add charge suppress API.
* FuriHal: add guards to insomnia and charge suppress routines.
* FuriHal: proper API for scheduler in power.
* FuriHal: move charging control from critical section, fix deadlock.
* Gui: use FreeRTOS native timers controls for IconAnimation, fix crash on animation start stop
* [FL-1811] FuriHal: move core2 startup to hal init stage, prevent working with flash controller till core2 startup finish. #704
* SubGhz: fix GO0 low on last hop transmission, decreased DutyCycle in tests
* SubGhz: test_static fix max 5 sec in transmission mode, DutyCycle <23%
* [FL-1815] SubGhz: prohibiting transmission if it is not within the permitted range for the given region
* SubGhz: fix F7 furi-hal-subghz
* SubGhz: fix logic working tests
* SubGhz: fix princeton encoder for test
* SubGhz: add log princeton encoder
* [FL-1856] Subghz: fix output a double error if the file cannot be opened
* [FL-1851] SubGhz: add deleting Stored Signals in SubGHz App
* SubGhz: add rename file SubGhz app
* SubGhz: update stats message in princeton
* SubGhz: correct spelling
* SubGhz: fix FM config, add hardware signal processing less than 16 μs, add added filter for processing short signals
* SubGhz: add Scher-Khan MAGICAR Dinamic protocol
* SubGhz: sync fury targets
Co-authored-by: あく <alleteam@gmail.com>
* Firmware: drop F5 target
* Rename app-loader to loader
* Update code owners file
* Loader: global application start lock API, minor refactoring
* Archive: update loader usage
* Cli: Command flags, global application start lock
* Apps: update cli API usage
* Bootloader: minor refactoring
* Firmware: minor build refactoring
* SubGhz: GUI packet test
* SubGhz: drop packet transmission and unused presets
* Github: drop F5 from build
* Archive: favorites
* Archive: a little bit more of Favorites
* ApiHal: set frequency and path in one go. Drivers: proper frequency registers calculation for CC1101. Update subghz cli to match new api.
* SubGhz: preparation for parsers porting, tim2 sharing
* ApiHal: add interrupts API, move all TIM2 related things there.
* SubGhz: refactor protocol lib and add keeloq.
* SubGhz: proper init_set for keeloq manafacture key
* SubGhz: port more protocols to lib
* SubGhz: load keeloq manufacture keys from sd card (if any).
* SubGhz: format output from protocols.
* SubGhz: use default frequency in subghz_rx cli command.
* SubGhz: keeloq key types
* Fix compillation error when internal storage disabled
* SubGhz: minor cleanup
* SubGhz: properly handle timeout and reset signal in subghz_rx
* SubGhz: Worker, Capture View. Furi: emulate thread join.
* SubGhz: free strings on keeloq key load end
* SubGhz: update protocols reporting API, app refactoring and capture view, update API HAL usage.
* SubGhz: update dump formatting
* ApiHal: backport subghz preset to F5
* ApiHal: backport subghz frequency range to F5
* API HAL SPI: refactoring, split into layers, prepare ST HAL separation. API HAL SubGhz: initialize on start. Drivers: add basic cc1101 driver. Update API usage. Debug: increase max debugger port speed. Remove subghz apps.
* CC1101: chip status handling. ApiHalSpi: increase SubGhz bus speed to 8mhz. F4: backport subghz initialization.
* Api Hal SubGhz: rx path and frequency. CC1101: frequency control.
* SubGhz Application: basic tests
* SubGhz app: tone and packet test. API HAL SUBGHZ: update configs, add missing bits and pieces.
* add battery health reading from gauge
* add battery health reading to api-hal-power
* update battery health in power application
Co-authored-by: あく <alleteam@gmail.com>
* Add F5 target, lp5562 driver and api-hal-light. Update api-usage, switch to F5 by default.
* API HAL: add i2c and hardware version api. Dolphin: show hardware version.
* OTP version generator and flashing utility.
* Assets script: fix code formatting
* Backport F5 changes to F4
* F4: disable insomnia, prevent damage to BLE RX path
* F5 HAL API Light: remove magic delay to fix magic BLE
* Dolphin: HW target validation on start
* invert RSSI indication in sub-1
* API HAL: rename board to body in version api
* Gpio tester: detach and release viewport on exit
Co-authored-by: aanper <mail@s3f.ru>
* Core, API: add externs for c++
* Makefile: improve debug speed, flash with openocd, cleanup f2 config
* Power: add cli diagnostic.
* Local: fix api hal externs
* Local: fix externs in main and flipper_hal
* F2: power state dump stabs
* Bootloader flashing with openocd
* F3: move bq drivers to libs
* temporary do not build drivers on local
* temporary do not build drivers on f2
Co-authored-by: aanper <mail@s3f.ru>
