* Add Universal AC Remote scene
* Implement AC gui
* Basic working implemetation
* Another Universal AC Remote implementation
* Update icons
* Adjust button positions
* Revert old ButtonPanel class
* Update resource manifest
* [FL-2627] Flipper applications: SDK, build and debug system (#1387)
* Update api definitions
* Add UniversalRemotes documentation
* Use more Flipper-friendly signal names
Co-authored-by: SG <who.just.the.doctor@gmail.com>
* Add MFC user keys list
* Leakey submenu fix
* Set next target for Save/Delete success scenes
* Delete individual user keys
* Update count of total keys
* Fix memory leak
* Check for duplicate keys
* Remove a submodule that I never added?
* Swap and position icons
* Revamp according to design doc
* Rename icons to include size and replace keychain icon with smaller variant
* Fix typos
* Final fixes
* Fufill requested changes
* Cleanup comments
* Merge dev after SD app loading
* Fixing icon names
* Revert merge mistakes and API version
* Scene switching adjustments
* F7: add/change/remove some nfc icons in api_symbols.csv
Co-authored-by: あく <alleteam@gmail.com>
* Add the "Two cities" parser
* Add plantain and plantain4k parsers
* Add new parsers to the supported list
* United card PoC
* Fix nfc device not sleeping
* Completely read the 4K troika variants
* Correct naming
* Update to reflect upstream changes
* Add support for MfUl info
* Fix parsers
* Card type detection fixes
* Remove debug info
* Fixes for the verification of cards
* nfc: fix verification for supported cards
* nfc: remove unused vars
* Improve card reading reliability and fix plantain
* plantain: change log level
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* Oregon v2.1 decoder
* Refactor FSM to switch
* Refactor headers
* Format strings
* Unit tests of oregon2
* Cleanups
* Add oregon2 raw data to random_test_raw.sub
* Adjust count of packets detected on random test
* Format sources
Co-authored-by: あく <alleteam@gmail.com>
* RFID: fix read info screen
* Fix line break for long data string
* Protocol data redecoding before write
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Show error popup when NFC chip is not init/disconnected
* Move to dialogs for the error message
* Fix a memory leak and wrap the hal check
* F7: update api_symbols.csv, add furi_hal_nfc_is_init
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* faploader: more subsystem headers in API table; not counting header entries for SDK version change
* subghz: removed dead function
* Adjusted API version
* hal: removed furi_hal_power_get_system_voltage
* lib: mbedtls: additional flags for .fap linkage
* fbt: rebuilding assets when git commit id changes
* fbt: removed assets rebuild on git commit id change; added explicit dependency for SDK source on compiled assets parts; removed unneeded sdk regeneration runs
* fbt: changed stock plugins to EXTERNAL apps; restored building app as a PLUGIN as a part of main fw as well as a .fap; readme fixes
* fbt: restored certain apps to PLUGIN type
* fbt: app manifests: renamed version->fap_version, added extra fields
* fbt: fixed version processing after rename
Co-authored-by: あく <alleteam@gmail.com>
* Show error popup when NFC chip is not init/disconnected
* Move to dialogs for the error message
* NFC notifications fixed to match the intended design
* Revert "Move to dialogs for the error message"
* Revert "Show error popup when NFC chip is not init/disconnected"
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Added support for running applications from SD card (FAPs - Flipper Application Packages)
* Added plugin_dist target for fbt to build FAPs
* All apps of type FlipperAppType.EXTERNAL and FlipperAppType.PLUGIN are built as FAPs by default
* Updated VSCode configuration for new fbt features - re-deploy stock configuration to use them
* Added debugging support for FAPs with fbt debug & VSCode
* Added public firmware API with automated versioning
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* LF RFID: port to plain C
* LFRFID debug port to C, new reading screen
* LFRFID debug: fix pvs-studio warnings
* RFID read view: remove unused input callback
* RFID read view: animation update
* Lib: update lfs to v2.5.0
* Storage: set minimum free pages for update on internal storage to 3
* Updater: lower min int free space limit
* lfs: disabled debug and trace logs by default
Co-authored-by: hedger <hedger@nanode.su>
* Add permission fix (no execute bit for source files) to fbt lint|format
* Remove execute bit from 59 source files using fbt format
* Also list which permissions are unwanted in lint.py
* Also remove exec permissions from lib/../rfal_nfc.c
Co-authored-by: あく <alleteam@gmail.com>
* FuriHal: sram2 memory manager
* FuriHal: sram2 memory allocator
* FuriHal: allow NULL buffers for txrx in spi hal
* SD card: sector cache
* FuriHal: fix init in memory hal
* RPC: STARTUP instead SERVICE
* Memory: pool "free" command
* Thread: service can be statically allocated in a memory pool
Co-authored-by: あく <alleteam@gmail.com>
* Fix U2F counter endianness
* Increment U2F counter before using it
* U2F: increment counter before use
* U2F: don't increment on U2fCheckOnly
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* nfc: add scroll element for info
* widget: format lines for scroll text element
* widget: fix new line generation
* widget: finish element text scroll
* nfc: rework ultralight and NTAG info scenes
* nfc: rework mf classic info screens
* nfc: rework nfca info scenes
* nfc: fix mf ultralight navigation
* widget: add documentation
* nfc: rework bank card infO
* nfc: rework device info scene
* nfc: fix incorrect atqa order
* mf ultralight: remove unused function
* widget: add mutex for model protection
* widget: fix memory leak
* nfc: rework delete scene
* nfc: fix selected item in saved menu scene
* widget: fix naming in text scroll element
* nfc: fix navigation from delete success
* nfc: add dictionary icon
* widget: fix memory leak
* SubGhz: update notification messages
* Assets: update default notification dolphin. SubGhz: update prohibited frequency text.
* FuriHal: finalize version and region link
* FuriHal: region HAL draft
* FuriHal,SubGhz: complete region provisioning.
* Rpc: fix null pointer dereference.
* Cli: device info formatting
* FuriHal: region provisioning fixes and documentation.
* Add the info screen
* Oops, don't dupe the points!
* Show ATQA and SAK, remove the back label
* And the dolphin doesn't need to be imported anymore
* Correct UX to the approved one
Co-authored-by: gornekich <n.gorbadey@gmail.com>
* Fix unexpected behaviour when opening remote from outside
* Same fix for editing button name
* Exit application correctly if remote was deleted
* Remove duplicate function from ibutton
* Use COUNT_OF macro
Co-authored-by: あく <alleteam@gmail.com>
* Do not use infrared worker callback for notifications
* Remove tx callback
* Port Infrared notifications to hardware blinker
* Move all blink message definitions to notification_messages.h
* Fix potential hangup after leaving debug scene
* Added option to edit UID in saved NFC files
* Fixed bug with saved filename
* Only show for data that can't be read
Co-authored-by: あく <alleteam@gmail.com>
* FIX: Fixed inconsistencies between texts: I have changed inconsistencies. Sometimes there was a missing capital letter and sometimes there was dot instead of exclamation mark and so on. No other changes were made. I have made the correction based on how other text looks on Fliper and for headers most texts use Pascal Case.
* FIX: Fixed inconsistencies between texts: Found 2 more texts with inconsistencies.
Co-authored-by: あく <alleteam@gmail.com>
* Fix incorrect buffered stream behaviour
* Add specific tests
* Make the test fail on wrong behaviour
* Better names
Co-authored-by: あく <alleteam@gmail.com>
* Updater: retrying pre-boot SD card mount multiple times
* Updater: added delay before retrying SD card mount on early boot
Co-authored-by: あく <alleteam@gmail.com>
* nfc: change read scene views
* nfc: rework return after save success
* nfc: add fallback to read UID of unrecognized iso14443-3
* nfc: show mifare desfire on read success
* nfc: add restore original confirm scene
* nfc: fix icon name
* nfc: clear 6 bit in SAK to emulate 14443-4 uids
* nfc: don't change original sak
* [FL-2684] SubGhz: fix incorrect CAME TWICE protocol definition
* [FL-2685] SubGhz: fix the recorded RAW signal is deleted when trying to transmit on a prohibited frequency
Co-authored-by: あく <alleteam@gmail.com>
* desktop: restored automatic power off & manual power off on slideshow view; assets: added frames for new first start sequence; docs: added info on slideshow compilation
* desktop: restarting long timer on OK button release
Co-authored-by: あく <alleteam@gmail.com>
* storage: added global #defines for /int, /ext & /any
* storage: introduced PATH_EXT, PATH_INT& PATH_ANY macros
* core apps: moved hardcoded config files names to separate headers; prefixed them with "."; updater: added file name migration to new naming convention on backup extraction
* storage: fixed storage_merge_recursive handling of complex directory structures; storage_move_to_sd: changed data migration logic to all non-dot files & all folders
* core: added macro aliases for core record names
* Bumped protobuf commit pointer
* storage: reserved 5 pages in /int; denying write&creation of non-dot files when running out of free space
Co-authored-by: あく <alleteam@gmail.com>
* Added condition to cli "log" command. If USB is disconnected while "log" command is running, it will end the command.
* Reverted change on cli_commands.c
Added condition in cli.c for cli_cmd_interrupt_received function to react appropriately when serial terminal is disconnected.
Added condition in subghz_cli.c for subghz chat cmd to exit gracefully when serial terminal is disconnected.
* Formatting
Co-authored-by: あく <alleteam@gmail.com>
* Move samsung raw data to assets
* Add more assets and fix bugs
* Clean up code
* Implement all raw data as assets
* Remove input data from old test files
* Better signal names
* Better file opening logic
* Implement loading parsed data from files
* Move most of RC5 tests into assets
* Add more test cases
* Add more test cases
* Eliminate RUN_DECODER macro
* Better code structure
* Implement run_encoder function
* More encoder tests
* Move all encoder tests to assets
* Move all test data to assets
* Normalise function names
* Rename code files
* Uncomment other tests
* Swich test order to avoid weird memory leaks
* UnitTests: cleanup output and redirect it into stdout
* UnitTests: selectable tests and better reporting
Co-authored-by: あく <alleteam@gmail.com>
* Update the HID Keycodes to pull from the library
* Composite BLE Report Map, add consumer & mouse HID
* Add Mouse & keyboard bt remote, fixed media remote
* BT Keyboard remove long press shift
* Fix usb hid modifier keys
* Fixed misaligned bad usb keys
* Fix keyboard app keys
* Partial fix for bt app and linux
* Update to work across platforms
* Fix for report ids
* BtHidApp: move variable from bss to model, cleanup naming.
* FuriHal: add const to immutable data declaration
Co-authored-by: あく <alleteam@gmail.com>
* Move structs to header
* roll mbedtls into loclass
* Picopass with scene for reading card
* Picopass: fix memory leak
* Lib: return mbedtls back
* Picopass: rename symbols to match naming guide
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* [FL-2610] SubGhz: add keypad lock SubGhz -> Read
* SubGhz: fix multiple clicks on the back button
* SubGhz: turn on the backlight when receiving with the keypad locked. key processing delay when exiting Locked mode
* SubGhz: chanage lock variable and enums names
* SubGhz: replace direct return with consumed
Co-authored-by: あく <alleteam@gmail.com>
* add mdedtls for des3 implementation
* add localss from RfidResearchGroup/proxmark3
* picopass reader app and rfal for communicating with picopass cards
* always turn off field
* close storage when keys are not found
* Add mbedtls as submodule
* add mbedtl_config
* Switched to only including specific mbedtls files I need. Thank you @kevinwallace
* cherry-pick kevinwallace sconsify
* scons for mbedtls/loclass
* Reset to ready state on error
* unsigned FC/CN
* clean FC/CN if not decoded
Co-authored-by: hedger <hedger@users.noreply.github.com>
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
* fbt: building `core` with respect for debug flag
* fbt: added size output for firmware elf
* Infrared: fix cli
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* nfc: don't give up on reading DESFire card if GET_KEY_SETTINGS fails
Some cards are configured to refuse to provide key settings, but still
provide other info. For example, Ubiquiti UniFi Protect access cards
won't list keys or applications, but will still answer GET_FREE_MEMORY.
* nfc: don't show error when saving DESFire card with no applications
* nfc: fix DESFire load with 0 applications or no PICC key settings
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* Add skeleton for infrared C port, rename old app
* Add scene stubs
* Add more views
* Misc changes
* Add remote and signal class stubs
* Complete infrared signal class
* Add remote button class stub
* Check if button contains a signal during destruction
* Complete infrared signal class more
* Implement remote storing
* Implement remote loading
* Fix error handling
* Implement remote transmitting
* Rename scene
* Canonise event consumption
* Implement remote learning (stub)
* Implement learn success screen (stub)
* Implement AskBack scene
* Improve remote saving&loading
* Fix remote file name
* Add LearnDone scene
* Switch from Remote scene correctly
* Add SceneButtonSelect
* Remove unneeded assert
* Add new SceneManager method
* Use new SceneManager method in Infrared
* Implement renaming of buttons and remotes
* Implement deleting of buttons and remotes
* Add universal remotes list
* Add brute force code
* Brute force code improvements
* Partially implement Universal Remote GUI
* Fix wrong singnal handling
* Fully implement Universal Remote
* Use standard custom events everywhere
* Return infrared CLI
* Remove old Infrared app
* Change container name
* Fix scene order
* Put ButtonPanel into stack only when needed
* Show loading animation during slow operations
* Do not hardcode Loading widget coordinates
* Switch Loading widget orientation as needed
* Save Start scene state
* Save Remote scene state
* Save Edit scene state
* Save EditButtonSelect scene state
* Do not use scene state
* Use string_t instead of const char* for brevity
* Fix memory leak
* Fix saving raw remotes
* Add Infrared debug menu
* Add debug view
* Move Infrared monitor into Infrared application
* Remove old Infrared monitor app
* Use common signal received callback everywhere
* desktop: prompt to power off on back button long press
Implemented by launching Power Settings app, passing "off" as arg to
directly jump to "power off" scene.
* Add more options
* Change from one big command to three small commands
These changes follow from the review. Instead of having to
rely in GOTOs (which are forbidden :<( ) to ensure cleaning,
I divided in smaller pieces. Since I had no feedback w.r.t
the previously existing `gpio_set`, this fits more with the
current implementation.
I also tried to interpret "That's not how we do enums" as
to not include a `enum EnumName` decl. when using typedefs.
I also distanced the implementation from using LL_GPIO
in favour of functions provided in `<furi_hal_gpio.h>`
but there was nothing to get the mode, so I stuck with
LL_GPIO for mode check.
Co-authored-by: あく <alleteam@gmail.com>
* nfc: refactor nfc_worker_read_mifare_desfire to use furi_hal_nfc_tx_rx
Renames furi_hal_nfc_exchange_full to furi_hal_nfc_tx_rx_full, and
rewrites it to use furi_hal_nfc_tx_rx. This eliminates the final
remaining use of furi_hal_nfc_exchange, so remove that.
* nfc: write debug.pcap when debug mode enabled
Limited to NFC protocols that use furi_hal_nfc_tx_rx to communicate.
* switch to Doxygen style comment
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: add frequency support 310 MHz
* SubGhz: deleting a TMP file using the "Erase" button in Read RAW
* SubGhz: fix frequency analyzer scan speed
* SubGhz: fix start duration came_atomo protocol
* SubGhz: refactoring subghz_setting
* SubGhz: refactoring load setting frequency analyzer
* SubGhz: fix load setting, default frequency
* SubGhz: patch raw temp file remove code to work with string_t
* Storage: parallel safe cli
* SubGhz: new frequency settings loading system
* Assets: recompile to include latest subghz custom frequency control changes
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: fix frequency reset on incomplete exit from the transmission menu
* SubGhz: fix incorrect shutdown of CC1101 if it was not turned on
* SubGhz: consciousness and transmission support Security+ 1.0
* Unit_test: add test encoder Security+ 1/0
* SubGhz: fix start counter Security+ 1.0
Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* File browser module and test app
* nfc: Add support for saved files in subdirectories
* nfc: Use helper function to get shadow path when loading data
* File browser dialog integration pt.1
* File browser dialog integration pt.2
* Gui,Dialogs: drop file select
* Correct use of dynamic string_t(string_ptr)
Co-authored-by: Yukai Li <yukaili.geek@gmail.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* nfc: Add NTAG I2C (Plus) 1K/2K read support
* nfc: Add rudimentary NTAG I2C emulation
* nfc: Closer NTAG I2C emulation plus debug logging
* nfc: Fix NTAG I2C sector select emulation
* nfc: Add security for NTAG I2C
* nfc: Send NAK correctly for MFUL reads
* nfc: Better emulate NTAG I2C SECTOR_SELECT behavior
* nfc: Fix non-I2C Ultralight read
Per datasheet, max sector for SECTOR_SELECT is 0xfe, so 0xff is OK
as uninit value
* nfc: Only read sig for NTAG if supported
Attempting to read signature breaks immediate call to sector select on
NTAG I2C original for some reason, so don't read signature if the
command is not supported
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Only the bottom nybble of buf[1] is the key ID; the top nybble contains flags.
Notably, the top bit is set for AES mode on EV1+ cards, and ORCA cards in the
Seattle area were just upgraded to include an app that uses AES.
Prior to this, cards with flags set could be read and saved just fine, but
loading them would fail due to missing keys. After this, tags saved with the
old version will load fine, and when re-saved will have the flags separated
out into a new field.
Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* battery service: add power state charachteristic
* bt: update power state on charging / discharging events
* ble config: support only one connection
* bt: always update flow control characteristic
* bt: fix power state update
* bt: simplify updating power state
* bt: don't update flow control charachteristic
* bt: Fix race condition when disconnect during TX
* bt: Move flag clear to not be in middle of other logic
* bt: Bail out of send bytes a little bit earlier
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
* SubGhz: MegaCode display changes
* SubGhz: refactoring frequency analyzer
* SubGhz: use one stage detection in frequency analyzer, tune bw, datarate and etc
* SubGhz: tune analyzer threshold
* SubGhz: raise frequency analyzer threshold and rssi sampling config
* SubGhz: fix frequency analyzer, small step frequency analysis
* SubGhz: subghz_frequency_analyzer_worker
* SubGhz: fix SUBGHZ_FREQUENCY_ANALYZER_THRESHOLD
* SubGhz: debug logging in frequency analyzer, increase MAGN_TARGET to max value
* SubGhz: reduce RSSI delay in frequency scanner
* SubGhz: fix delays, remove trace logging from frequency analyzer
* SubGhz: cleanup variable names and add comments
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Updater: Migrating to new manifest path convention
* RPC: Added update preparation status to RPC
* RPC: bumped protobuf submodule
* Bumped protobuf_version.h
* FuriCore: add missing include. Lib: make mlib smaller
* Explicitly tell where we have doubles and fix random in animations
* makefile: added -DLFS_NO_DEBUG
* Updater: path len constant dedup
* Updater: checking for hardware version match before parsing manifest
* LD: moved _DRIVER_CONTEXT sections to .bss, where they belong.
* LD: avoiding PROBGITS warning, moved _CONTEXT to data
* Updater: Added version check on update package - refusing to install outdated
Co-authored-by: あく <alleteam@gmail.com>
* Initial C iButton app setup
* Add more scenes
* Add even more scenes
* Add even more scenes again
* More scenes...
* Add key info scene
* Add delete success scene
* Use scene state to store internal data
* Add parameter parsing
* Add emulate scene
* Add write scene
* Add write success scene
* Add Read scene
* Add read success scene
* Add exit confirm scene
* Add retry confirm scene
* Add CRC error scene
* Add not key scene
* Add read key menu scene
* Rename some scenes
* Refactor conditionals
* Remove unneeded custom events
* Remove the old iButton app
* Correct formatting
* Remove rogue comments and function prototypes
* iButton: cleanup merge artifacts and fix warnings
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Updater: UI rework initial
* Updater: further updates to UI, added a temporary parrot
* Updater: additional checks on radio stack type before update
* Second iteration of updater UI: additional handling of resource unpacking errors
* updater: removed extra logging, renamed some stages
* Updater: Changed "back" button icon on error screen
* Archive: signed/unsigned fix
* Updater: cancelling update also cancels LFS+resources processing; restored /ext/update/ folder magic to 0
* Updater: root dir fix
Co-authored-by: nminaylov <nm29719@gmail.com>
* Fixing compiler warnings with -Wextra
* More warnings suppression, WIP
* Even more warning fixes
* Added new lines at end of text files.
* Padding fix
* Additional fixes to warnings on different build configurations; added -Wextra to default build pipeline
* Fixes for Secplus v1
* -additional warnings
* +-Wredundant-decls fixes
* FuriHal: print stack overflow task name in console
* FuriHal: add missing include
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Music player: cli tool and new worker
* Music player cli: flush message
* Music player: fix note calculation
* MusicPlayer: fix # parsing and add magic
* FuriHal: improve speaker volume handling. MusicPlayer: minor sustain improvements
* MusicPlayer: fix buffer overseek
* FuriHal: drop unused variables
* MusicPlayer: LFO 4 magic
* MusicPlayer: add RTTTL parser
* MusicPlayer: refactoring and add file open dialog on start
* MusicPlayer: fix memcpy issue and more
* FuriHal: force disconnect USB on early init and then leave usb line alone for some time.
* FuriHal: switch speaker to old volume. MusicPlayer: fix incorrect note history, and drop lfo from worker.
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* [FL-2515] Keep backlight on for updater ops
* Notification: Renamed backlight sequences to more obvious names
Co-authored-by: あく <alleteam@gmail.com>
