* Lib: new flipper file format library
* Lib: flipper file format cpp wrapper
* Storage: simple function for remove file and check error
* iButton app: remove file worker, use new flipper file format instead
* Dialogs: storage error message
* Storage: simple function for mkdir and check error
* iButton app: error messages
* Libs: update makefile
* RFID app: remove file worker, use new flipper file format instead
* Flipper File: library documentation
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Lib: add random name library
* Text_input: add default text clearing
* All: rework all applications with new text_input API
* Nfc: fix removing dev file on save_name scene enter
* Lib: move all free radicals to toolbox and update API usage.
Co-authored-by: あく <alleteam@gmail.com>
* Firmware: drop F5 target
* Rename app-loader to loader
* Update code owners file
* Loader: global application start lock API, minor refactoring
* Archive: update loader usage
* Cli: Command flags, global application start lock
* Apps: update cli API usage
* Bootloader: minor refactoring
* Firmware: minor build refactoring
* SubGhz: GUI packet test
* SubGhz: drop packet transmission and unused presets
* Github: drop F5 from build
* Archive: favorites
* Archive: a little bit more of Favorites
* Add RAW format
* F5 stubs for build to pass
* Fix saving decoded signal error
* Irda: set ISR before starting timer, remove explicit NVIC configuration
Co-authored-by: あく <alleteam@gmail.com>
* ApiHal: set frequency and path in one go. Drivers: proper frequency registers calculation for CC1101. Update subghz cli to match new api.
* SubGhz: preparation for parsers porting, tim2 sharing
* ApiHal: add interrupts API, move all TIM2 related things there.
* SubGhz: refactor protocol lib and add keeloq.
* SubGhz: proper init_set for keeloq manafacture key
* SubGhz: port more protocols to lib
* SubGhz: load keeloq manufacture keys from sd card (if any).
* SubGhz: format output from protocols.
* SubGhz: use default frequency in subghz_rx cli command.
* SubGhz: keeloq key types
* Fix compillation error when internal storage disabled
* SubGhz: minor cleanup
* SubGhz: properly handle timeout and reset signal in subghz_rx
* SubGhz: Worker, Capture View. Furi: emulate thread join.
* SubGhz: free strings on keeloq key load end
* SubGhz: update protocols reporting API, app refactoring and capture view, update API HAL usage.
* SubGhz: update dump formatting
* ApiHal: backport subghz preset to F5
* ApiHal: backport subghz frequency range to F5
* Add cscope db generation
* Add api-hal-irda, TIM2: HAL->LL
* Add libirda: pwm decoding
* Universal state machine
* Add irda decoder library
* Move IRDA capture to standalone tool
* Add encoder/decoder samsung32, NEC, fix bugs
* Port current App to new Irda lib
* Fix clang format for test data
* Port IRDA api-hal to f6
Co-authored-by: あく <alleteam@gmail.com>
* Add littlefs submodule
* Furi: add mutex in logging, fix issues with corrupted printf
* ApiHal: disable debug traces in ble glue
* App-loader: more logs
* Passport: fix invalid DolphinState usage
* ApiHal, linker script: flash API is now aware of free space, complete abstraction layer for storage
* Internal Storage: littlefs based storage services with key value API. Migrate dolphin state to new storage API.
* Add bootloader versioning
* Move some logic to api-hal-version
* Backport to f4
* Dolphin: update version screen layout, make it more readable
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* rename old ibutton app to ibutton-test
* more renames
* updated onewire library compilation condition
* add submenu_clean subroutine
* add index for submenu callback
* c++ guard for gui modules
* add released ibutton app
* fix the position of the submenu window if there are too few items
* iButton app basis
* negative icon position info
* fix submenu_clean subroutine
* add ibutton app to applications makefile
* add onewire key read routine to read mode
* rename mode to scene
* rename files and folder (mode to scene)
* rename ibutton view to view manager
* rename get_view to get_view_manager
* cpp guards
* key read, store and notify features
* syntax fix
* make iButtonScene functions pure virtual
* fix syntax
* add text store, add new scene (crc error)
* not a key scene
* syntax fix
* read success scene
* app, switching to the previous scene with the number of scenes to be skipped
* scene whith menu when key is readed
* fix font height calculation, fix offsets
* add key write scene
* view_dispatcher_remove_view subroutine
* generic pause/resume os methods
* fix furi_assert usage
* key store, worker
* fix pointer comparsion
* saved keys, saved key action scenes
* key delete/confirm delete scenes and routines
* use last input subsystem changes
* fix syntax
* fix new model usage in submenu
* fix includes
* use vibro pin
* use stored key name if valid
* emulate scene
* random name generator
* name and save readed key scenes, new icon
* fix icon position
* fix text scene exit
* fix naming, fix text placement, new info scene
* state-driven cyfral decoder
* better cyfral decoder
* better cyfral decoder
* one wire: search command set
* metakom decoder
* more key types
* add next scene to error scenes
* universal key reader
* use new key reader
* syntax fix
* warning fix
* byte input module template
* new thread and insomnia api usage
* New element: slightly rounded frame
* Use elements_slightly_rounded_frame in text input
* Gui test app: byte input usage
* Byte input module: data drawing and selection
* Byte input: comment currently unused fns
* remove volatile qualifier
* base byte input realisation
* App gui test: remove internal fns visibility
* Byne input, final version
* test install gcc-arm-none-eabi-10-2020-q4-major
* test install gcc-arm-none-eabi-10-2020-q4-major
* App iButton: byte input view managment
* App iButton: add key manually scenes
* App iButton: rename scenes, add popup timeout
* App iButton: use new scenes, new fn for rollback to specific prevous scene.
* App iButton: remove byte input view on app exit
* App iButton: edit key scene
* Module byte input: reduce swintch value to uint8_t
* Module byte input: switch from switch-case to if, unfortunately we need compile-time constants to use with switch
* Icons: new small arrows
* Module byte input: new arrangement of elements
* OneWire slave lib: fix deattach sequence
* App iButton: pulse sequencer
* App iButton: add more keys to store
* App iButton: split key worker to separate read/write/emulate entitys
* App iButton: use new read/emulate entities
* fix callback pointer saving
* App iButton: use KeyReader error enum instead of KeyWorker error list handling
* App iButton: do not use insomnia fns in pulse sequencer
* App iButton: use KeyReader error enum in read scene
* OneWire slave lib: more READ ROM command variants, call callback only if positive result
* GPIO resources: add external gpio
* App SD/NFC: removed application
* App iButton-test: update to new light api
* App iButton: update to new light-api
* Outdated apps: add api-light-usage
* Gpio: update SD card CS pin settings
* API-power: added fns to disable/enable external 3v3 dc-dc
* API-gpio: separated SD card detect routines
* Resources: removed sd cs pin
* SD card: low level init now resets card power supply
* App SD-filesystem: use new card detect fns
* SD card: fix low level init headers
* SD card: more realilable low level init, power reset, exit from command read cycle conditionally
* App SD-filesystem: led notifiers, init cycling
* SD card: backport to F4
* Api PWM: add c++ guards
* App iButton: yellow blink in emulate scene, vibro on
* App iButton: one wire keys command set
* App iButton: successful write scene
* App iButton: key writer
* App iButton: syntax fix
* App iButton: notify write success
* App iButton: fix double scene change
* SD card: handle eject in init sequence
* SD card: api to set level on detect gpio
* SPI: api to set state on bus pins
* SD card: set low state on bus pins while power reset
* File select: init
* File select: fix input consuming
* SD Card: fixed dir open api error
* SD-card: replace strncpy by strlcpy. Fix buffer overflow error.
* API HAL OS: replace CMP based ticks with ARR based one, hard reset lptimer on reconfiguration.
* GUI: More stack size for (temporary, wee need to implement sd card api in separate thread)
* GUI: File select module.
* App iButton-test: remove obsolete app
Co-authored-by: rusdacent <rusdacentx0x08@gmail.com>
Co-authored-by: coreglitch <mail@s3f.ru>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SYSTEM: tickless mode with deep sleep.
* Move FreeRTOS ticks to lptim2
* API: move all sumbodules init routines to one place. Timebase: working lptim2 at tick source.
* API Timebase: lp-timer routines, timer access safe zones prediction and synchronization. FreeRTOS: adjust configuration for tickless mode.
* NFC: support for tickless mode.
* API Timebase: improve tick error handling in IRQ. Apploader: use insomnia mode to run applications.
* BLE: prevent sleep while core2 starting
* HAL: nap while in insomnia mode
* init records work
* try to implement record delete
* tests and flapp
* flapp subsystem
* new core functions to get app stat, simplify core code
* fix thread termination
* add strdup to core
* fix tests
* Refactoring: remove all unusued parts, update API usage, aggreagate API sources and headers, new record storage
* Refactoring: update furi record api usage, cleanup code
* Fix broken merge for freertos apps
* Core, Target: fix compilation warnings
* Drop firmware target local
* HAL Timebase, Power, Clock: semaphore guarded access to clock and power modes, better sleep mode.
* SD-Filesystem: wait for all deps to arrive before adding widget. Core, BLE: disable debug dump to serial.
* delete old app example-ipc
* delete old app fatfs list
* fix strobe app, add input header
* delete old display driver
* comment old app qr-code
* fix sd-card test, add forced widget update
* remove unused new core test
* increase heap to 128k
* comment and assert old core tests
* fix syntax
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* Core, API: add externs for c++
* Makefile: improve debug speed, flash with openocd, cleanup f2 config
* Power: add cli diagnostic.
* Local: fix api hal externs
* Local: fix externs in main and flipper_hal
* F2: power state dump stabs
* Bootloader flashing with openocd
* F3: move bq drivers to libs
* temporary do not build drivers on local
* temporary do not build drivers on f2
Co-authored-by: aanper <mail@s3f.ru>
* variable cluster size, label info functions for targets
* app record
* init, mount, get label, get sn, get space
* enable exfat
* more stack for the stack god
* remove c app and add cpp app
* remove MULTI_PARTITION
* fix 4gb bug
* update app to new template lib, add animated waiting
* tiny buffer configuration
* write speed benchmark
* fnv1a hash library
* make DEFAULT_STACK_SIZE and MAX_TASK_COUNT defined per target
* fully functional sd card app
* build sd test app to release firmware
* cpp, not c
* light up red led if error
* flags for c++
* linking with g++
* suppres snprintf warning
* move format work area to heap
Co-authored-by: coreglitch <mail@s3f.ru>
* Assets: import from gdrive
* Assets: fully working build pipeline and registry
* NFC: menu icon
* Gui: layers. Irukagotchi: base app to handle input on idle screen. Makefile: reboot after flash in dfu mode.
* ValueMutex: with lambda
* Assets: proper animation frames sorting
* ValueMutex: proper furi_open usage
* Assets,GUI: split icon into icon data and icon state.
* Format source code
* Docker: add python3 and imagemagic
* Irukagotchi: cleanup
* GUI: event lock moved to gui.
* Rfid: proper gui layer
* GUI: elements. Menu: frame and scroll
* GUI, Menu: format code.
* Menu: dual font main menu
* Menu: format sources
* GUI: 0 total scrollbar
* CI: enable lfs
* Menu: pixel perfect main menu
Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: aanper <mail@s3f.ru>
* add input debounce code from old fw
* exampl of input api
* change input API to get/release
* revert input API to read
* pointer instead of instance
* add input API description
* add display API
* rewrite display names
* migrate to valuemanager
* add LED API
* add closing brakets
* add sound api
* fix led api
* basic api
* rename API pages
* change pubsub implementation
* move FURI AC -> flapp, add valuemutex example, add valuemanager implementation
* pubsub usage example
* user led example
* update example
* simplify input
* add composed display
* add SPI/GPIO and CC1101 bus
* change cc1101 api
* spi api and devices
* spi api and devices
* move SPI to page, add GPIO
* not block pin open
* backlight API and more
* add minunit tests
* fix logging
* ignore unexisting time service on embedded targets
* fix warning, issue with printf
* Deprecate furi_open and furi_close (#167)
Rename existing furi_open and furi_close to deprecated version
* add exitcode
* migrate to printf
* indicate test by leds
* add testing description
* rename furi.h
* wip basic api
* add valuemutex, pubsub, split files
* add value expanders
* value mutex realization and tests
* valuemutex test added to makefile
* do not build unimplemented files
* fix build furmware target f2
* redesigned minunit tests to allow testing in separate files
* test file for valuemutex minunit testing
* minunit partial test valuemutex
* local cmsis_os2 mutex bindings
* implement furi open/create, tests
* migrate concurrent_access to ValueMutex
* add spi header
* Lib: add mlib submodule.
Co-authored-by: rusdacent <rusdacentx0x08@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* fixed inline functions for modern C standart
* more stack for application
* added library
* init fatfs library
* fatfs example application
* Merge with current master
* fix typo and delete old files
* cmsis os 2 reentrance fix
* Reworked dependency wait to support multiple dependency
* Build FatFS on local target, syscall.c is target-specific.
* run local target ok
* testcase for fatfs
Co-authored-by: aanper <mail@s3f.ru>
* Lib: move cube to libs. Firmware: prepare for code base refactoring, detach from cube, port to cmsis_os2.
* Firmware, target f2: regenerate project with latest cube package, tim17 for os ticks.
* Firmware: unified codebase.
* Core: do not include semaphore on old targets. Firmware: dfu uplaod target.
* CI: submodules, add firmware build.
* CI: proper submodule config.
* refactor build system
* CI: update chain to use new targets. Documentation: update to match current structure.
* CI: clean before rebuild.
* Add local test
docker-compose exec dev make -C firmware TARGET=local TEST=1 run
* Makefile: target specific build directory. CI: updated artifacts path.
* Makefile: init git submodules if they don't exists.
* Makefile: debug rule now doesn't reset MCU, prevent SIGINT propagation to st-util.
* Makefile: proper rebuild sequence in zz and zzz
* Makefile: timestamp tracking for flash and upload commands.
* Apps: modular build. Input: fix flipper hal inline.
* Wiki: proper bootloader link.
* Applications: fix broken build for local targets.
* add st-flash to docker
* fix build
* force rebuild app
* move app force to firmware part
* fix build deps
* qrcode build ok
* fix example display
* add testing routine
* update build instruction
Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: aanper <mail@s3f.ru>
