flipperzero-firmware/wiki/Testing.md

Bootloader test

1. Clean flash

2. make -C bootloader flash # Load bootloader
3. # reboot device
   1. Press right
   2. Press left
   3. Wait 0.1 s
   4. Release left
   5. Release right
4. Wait 0.5 s
5. # Expect no FW
   1. Expect: no uart welcome message
   2. Expect: red led on
   3. Expect: no USB
6. # reboot device and go to DFU
   1. Press left
   2. Press right
   3. Wait 0.1 s
   4. Release left
   5. Wait 0.5 s
   6. Release right
7. Wait 0.5 s
8. # Expect DFU
   1. Expect: blue led on
   2. Expect: USB: DFU
9. target_f2/deploy-dfu.sh # load FW
10. # reboot device
    1. Press right
    2. Press left
    3. Wait 0.1 s
    4. Release left
    5. Release right
11. Wait 0.5 s
12. # Expect FW
    1. Expect: uart welcome message
    2. Expect: USB Flipper CDC