8c36d65e63
* Add input driver and definitions for target_f2 * Add input_dump example * Invert charge input * Fix back and left button configuration * remove input debug * input testing case * move header * lint code Co-authored-by: aanper <mail@s3f.ru>
63 lines
1.3 KiB
Markdown
63 lines
1.3 KiB
Markdown
# Bootloader testcase
|
|
|
|
1. `# Clean flash`
|
|
2. `make -C bootloader flash` `# Load bootloader`
|
|
3. `# reboot device`
|
|
* Press right
|
|
* Press left
|
|
* Wait 0.1 s
|
|
* Release left
|
|
* Release right
|
|
4. Wait 0.5 s
|
|
5. `# Expect no FW`
|
|
* Expect: no uart welcome message
|
|
* Expect: red led on
|
|
* Expect: no USB
|
|
6. `# reboot device and go to DFU`
|
|
* Press left
|
|
* Press right
|
|
* Wait 0.1 s
|
|
* Release left
|
|
* Wait 0.5 s
|
|
* Release right
|
|
7. Wait 0.5 s
|
|
8. `# Expect DFU`
|
|
* Expect: blue led on
|
|
* Expect: USB: DFU
|
|
9. `target_f2/deploy-dfu.sh` `# load FW`
|
|
10. `# reboot device`
|
|
* Press right
|
|
* Press left
|
|
* Wait 0.1 s
|
|
* Release left
|
|
* Release right
|
|
11. Wait 0.5 s
|
|
12. `# Expect FW`
|
|
* Expect: uart welcome message
|
|
* Expect: USB Flipper CDC
|
|
|
|
# Input testcase
|
|
|
|
1. `docker-compose exec dev make -C target_f2 example_input_dump`
|
|
2. Flash
|
|
3. For x in ```
|
|
[
|
|
(Up, "00"),
|
|
(Down, "01"),
|
|
(Right, "02"),
|
|
(Left, "03"),
|
|
(Ok, "04"),
|
|
(Back, "05"),
|
|
]
|
|
```
|
|
* Press ${x[0]}
|
|
* wait 0.05
|
|
* Expect: Uart: "event: ${x[1]} pressed"
|
|
* wait 0.05
|
|
* Release ${x[0]}
|
|
* wait 0.05
|
|
* Expect: Uart: "event: ${x[1]} released"
|
|
* wait 0.05
|
|
|
|
TODO: add debouncing check (multiple press and check there is no multiple events)
|