liz/flipperzero-firmware
liz/flipperzero-firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1d50a5981e
flipperzero-firmware/documentation/KeyCombo.md
Albert Kharisov 84410c83b5
[FL-2183] [FL-2209] Dolphin Deeds, Level up, assets generation, refactoring (#965) 
* Desktop: cleanup headers
* Get loader pubsub via record
* [FL-2183] Dolphin refactoring 2022.01
* Restruct animations assets structure
* Rename assets
* Cleanup headers
* Update Recording animation
* Add BadBattery animation
* Provide loader's pubsub via record
* Fix load/unload animations
* Scripts: add flipper format support, initial dolphin packager rework. Assets: internal and external dolphin.
* Sync internal meta.txt and manifest.txt
* Reorder, rename dolphin assets
* Split essential generated assets
* Add ReadMe for dolphin assets
* Separate essential blocking animations
* Scripts: full dolphin validation before packaging
* Assets, Scripts: dolphin external resources packer
* Github: update codeowners
* Scripts: proper slots handling in dolphin animation meta
* Scripts: correct frames enumeration and fix compiled assets.
* [FL-2209] Add Dolphin Deeds points and many more
* Remove excess frame_rate
* Change dolphin assets directory
* Scripts: add internal resource support to dolphin compiler
* Scripts: add internal assets generation, renaming
* Scripts: correct assert, renaming
* Code cleanup, documentation, fixes
* Update Levelup animations
* Rename essential -> blocking
* Fix Unlocked hint
* Scripts: rewrite Templite compiller, replace regexps with token parser, split block types into code and variable blocks. Update dolphin templates.
* Documentation: add key combos description and use information
* Scripts: cleanup templit, more debug info and add dev comment

Co-authored-by: あく <alleteam@gmail.com>
2022-01-29 12:20:41 +03:00

3.6 KiB
Raw Blame History

Key Combos

There are times when your flipper feels blue and don't respond to your commands. In that case you may find this guide useful.

Basic Combos

Hardware Reset

  • Press LEFT and BACK and hold for couple seconds
  • Release LEFT and BACK

This combo performs hardware reset by pulling MCU reset line down. Main components involved: Keys -> DD8(NC7SZ32M5X, OR-gate) -> DD1(STM32WB55, MCU)

There is 1 case when it's not working:

  • MCU debug block is active and holding reset line from inside.

Hardware Power Reset

  • Disconnect USB and any external power supplies
  • Disconnect USB once again
  • Make sure that you've disconnected USB and any external power supplies
  • Press BACK and hold for 30 seconds (Only will work with USB Disconnected)
  • If you have not disconnected USB, then disconnect USB and repeat previous step
  • Release BACK key

This combo performs reset by switching SYS power line off and then on. Main components involved: Keys -> DD6(bq25896, charger)

There is 1 case when it's not working:

  • Power supply is connected to USB or 5V_ext

Software DFU

  • Press LEFT on boot to enter DFU with flipper boot-loader

There is 1 case when it's not working:

  • Flipper Boot-loader is damaged or absent

Hardware DFU

  • Press OK on boot to enter DFU with ST boot-loader

There is 1 case when it's not working:

  • Option Bytes are damaged or set to ignore OK key

DFU Combos

Hardware Reset + Software DFU

  • Press LEFT and BACK and hold for couple seconds
  • Release BACK
  • Device will enter DFU with indication (Blue LED + DFU Screen)
  • Release LEFT

This combo performs hardware reset by pulling MCU reset line down. Then LEFT key indicates to boot-loader that DFU mode requested.

There are 2 cases when it's not working:

  • MCU debug block is active and holding reset line from inside
  • Flipper Boot-loader is damaged or absent

Hardware Reset + Hardware DFU

  • Press LEFT and BACK and OK and hold for couple seconds
  • Release BACK and LEFT
  • Device will enter DFU without indication

This combo performs hardware reset by pulling MCU reset line down. Then OK key forces MCU to load internal boot-loader.

There are 2 cases when it's not working:

  • MCU debug block is active and holding reset line from inside
  • Option Bytes are damaged or set to ignore OK key

Hardware Power Reset + Software DFU

  • Disconnect USB and any external power supplies
  • Press BACK and LEFT for 30 seconds
  • Release BACK
  • Device will enter DFU with indication (Blue LED + DFU Screen)
  • Release LEFT
  • Plug USB

This combo performs reset by switching SYS power line off and then on. Then LEFT key indicates to boot-loader that DFU mode requested.

There are 2 cases when it's not working:

  • Power supply is connected to USB or 5V_ext
  • Flipper Boot-loader is damaged or absent

Hardware Power Reset + Hardware DFU

  • Disconnect USB and any external power supplies
  • Press BACK and OK and hold for 30 seconds
  • Release BACK and OK
  • Device will enter DFU without indication
  • Plug USB

This combo performs reset by switching SYS power line off and then on. Then OK key forces MCU to load internal boot-loader.

There are 2 cases when it's not working:

  • Power supply is connected to USB or 5V_ext
  • Option Bytes are damaged or set to ignore OK key

Alternative ways to recover your device

If none of the described methods were useful:

  • Ensure battery charged
  • Disconnect battery and connect again (Requires disassembly)
  • Try to Flash device with ST-Link or other programmer that support SWD

If you still here and your device is not working: it's not software issue.