flipperzero-firmware/scripts/ReadMe.md
gornekich ecff31d228
[FL-1643] NFC emv assets (#661)
* assets: add EMV AID table for NFC app
* file-worker: add searching for value by the key
* nfc: add emv parser helpers
* assets: add country and currency codes
* nfc: add country and currency code parsing
* emv_decoder: add country and currency code support
* nfc: add AID. currency and country display
* nfc: rework bank_card view
* nfc: add currency and country save
* assets: change emv chip asset
* nfc: change asset in bank card
* gui: add frame element to widget
* nfc: add bank card frame, add documentation
* rfal: fix long APDU command emulation
* nfc: fix typos
* Scripts ReadMe: assets delivery command

Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-08-20 22:56:43 +03:00

63 lines
1.6 KiB
Markdown

# About
This folder contains differnt scripts that automates routine actions.
Flashing scripts are based on cli version of [STM32CubeProgrammer](https://www.st.com/en/development-tools/stm32cubeprog.html).
You will need to add STM32_Programmer_CLI to your path to use them.
# Flashing empty MCU/Flipper
Always flash your device in the folllowing sequence:
- OTP (Only on empty MCU)
- Core2 firmware
- Core1 firmware
- Option Bytes
## Otp flashing
!!! Flashing incorrect OTP may permanently brick your device !!!
Normally OTP data generated and flashed at factory.
In case if MCU was replaced you'll need correct OTP data to be able to use companion applications.
Use `otp.py` to generate OTP data and `flash_otp_version_*` to flash OTP zone.
You will need exact main board revision to genrate OTP data. It can be found on main PCB.
!!! Flashing incorrect OTP may permanently brick your device !!!
## Core2 flashing
Script blindly updates FUS and Radiostack. This operation is going to corrupt bootloader and firmware.
Reflash Core1 after Core2.
## Core1 flashing
Script compiles and flashes both bootloader and firmware.
## Option Bytes
!!! Setting incorrect Otion Bytes may brick your MCU !!!
Defaults are mostly OK, but there are couple things that we'd like to tune.
Also OB may be damaged, so we've made couple scripts to check and set option bytes.
!!! Setting incorrect Otion Bytes may brick your MCU !!!
Checking option bytes:
```bash
ob.py check
```
Setting option bytes:
```bash
ob.py set
```
# Assets delivery
Run in the root folder of the repo:
```bash
python scripts/storage.py -p <flipper_cli_port> send assets/resources /ext
```