liz/flipperzero-firmware
liz/flipperzero-firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
4820a63c38
flipperzero-firmware/wiki/Testing.md
Vadim Kaushan 8c36d65e63
Input handling and debouncing (#148) 
* Add input driver and definitions for target_f2

* Add input_dump example

* Invert charge input

* Fix back and left button configuration

* remove input debug

* input testing case

* move header

* lint code

Co-authored-by: aanper <mail@s3f.ru>
2020-10-02 09:44:05 +03:00

1.3 KiB
Raw Blame History

Bootloader testcase

  1. # Clean flash
  2. make -C bootloader flash # Load bootloader
  3. # reboot device
    • Press right
    • Press left
    • Wait 0.1 s
    • Release left
    • Release right
  4. Wait 0.5 s
  5. # Expect no FW
    • Expect: no uart welcome message
    • Expect: red led on
    • Expect: no USB
  6. # reboot device and go to DFU
    • Press left
    • Press right
    • Wait 0.1 s
    • Release left
    • Wait 0.5 s
    • Release right
  7. Wait 0.5 s
  8. # Expect DFU
    • Expect: blue led on
    • Expect: USB: DFU
  9. target_f2/deploy-dfu.sh # load FW
  10. # reboot device
    • Press right
    • Press left
    • Wait 0.1 s
    • Release left
    • Release right
  11. Wait 0.5 s
  12. # Expect FW
    • Expect: uart welcome message
    • Expect: USB Flipper CDC

Input testcase

  1. docker-compose exec dev make -C target_f2 example_input_dump
  2. Flash
  3. For x in ``` [ (Up, "00"), (Down, "01"), (Right, "02"), (Left, "03"), (Ok, "04"), (Back, "05"), ]
    * Press ${x[0]}
    * wait 0.05
    * Expect: Uart: "event: ${x[1]} pressed"
    * wait 0.05
    * Release ${x[0]}
    * wait 0.05
    * Expect: Uart: "event: ${x[1]} released"
    * wait 0.05

TODO: add debouncing check (multiple press and check there is no multiple events)