76e3fd3060
* Firmware, Bootloader: add f3 target. Refactor code to be portable across targets. * Firmware: remove bkpt * Makefile: debug agent. Debug: f3 platform throw openocd. * freertos-openocd helper * separate hal resources * return of input_dump app * using hew target resources abstration layer for backlight and blink * dirty hack for input driver, f3 has no charging pin * worked input interrupts * working display * F3: switch to 32mHz resonator * F3: configure SD_CS pin * NFC: port to F3. * fat uart app * sd card hal api * separate CC1101 spi config * faster spi gpio for sd card * Assets: disable LFS * Cube: disable css on LSE * Input: format code * Make: add bootloader source code to formatting rule * F3: enable rf by default, adjust clock settings, map all pins where they should be. * libs for coreglitch_demo_0 * nvic priority * bus clocks all to 64 * lf-rfid timer and pin * irda * ir rx setup * tim2 irq handler * Makefile: environment aware mkdir * Makefile, Irukagotchi: commit seq number. * split falling and rising ir rx events * Makefile: proper git branch detect on old git. Firmware: api fix. * fix irda * Makefile,Irukagotchi: date timestamp. * NFC: adjust SPI speed * Irukagotchi: format code * Make: add blackmagic debug in host mode * Makefile: detach blackmagic from terminal signals * Makefile,Irukagotchi: stamp target * add F3 bootloader/firmware to CI Co-authored-by: Aleksandr Kutuzov <aku@plooks.com> Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com> Co-authored-by: aanper <mail@s3f.ru>
291 lines
8.9 KiB
C
291 lines
8.9 KiB
C
/**
|
|
******************************************************************************
|
|
* File Name : SPI.c
|
|
* Description : This file provides code for the configuration
|
|
* of the SPI instances.
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2020 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under Ultimate Liberty license
|
|
* SLA0044, the "License"; You may not use this file except in compliance with
|
|
* the License. You may obtain a copy of the License at:
|
|
* www.st.com/SLA0044
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "spi.h"
|
|
|
|
/* USER CODE BEGIN 0 */
|
|
|
|
/* USER CODE END 0 */
|
|
|
|
SPI_HandleTypeDef hspi1;
|
|
SPI_HandleTypeDef hspi2;
|
|
|
|
/* SPI1 init function */
|
|
void MX_SPI1_Init(void)
|
|
{
|
|
|
|
hspi1.Instance = SPI1;
|
|
hspi1.Init.Mode = SPI_MODE_MASTER;
|
|
hspi1.Init.Direction = SPI_DIRECTION_2LINES;
|
|
hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
|
|
hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
|
|
hspi1.Init.CLKPhase = SPI_PHASE_2EDGE;
|
|
hspi1.Init.NSS = SPI_NSS_SOFT;
|
|
hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
|
|
hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
|
hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
|
|
hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
|
hspi1.Init.CRCPolynomial = 7;
|
|
hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
|
hspi1.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
|
|
if (HAL_SPI_Init(&hspi1) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
}
|
|
/* SPI2 init function */
|
|
void MX_SPI2_Init(void)
|
|
{
|
|
|
|
hspi2.Instance = SPI2;
|
|
hspi2.Init.Mode = SPI_MODE_MASTER;
|
|
hspi2.Init.Direction = SPI_DIRECTION_2LINES;
|
|
hspi2.Init.DataSize = SPI_DATASIZE_8BIT;
|
|
hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
|
|
hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
|
|
hspi2.Init.NSS = SPI_NSS_SOFT;
|
|
hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_16;
|
|
hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
|
hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
|
|
hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
|
hspi2.Init.CRCPolynomial = 7;
|
|
hspi2.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
|
hspi2.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
|
|
if (HAL_SPI_Init(&hspi2) != HAL_OK)
|
|
{
|
|
Error_Handler();
|
|
}
|
|
|
|
}
|
|
|
|
void HAL_SPI_MspInit(SPI_HandleTypeDef* spiHandle)
|
|
{
|
|
|
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
|
if(spiHandle->Instance==SPI1)
|
|
{
|
|
/* USER CODE BEGIN SPI1_MspInit 0 */
|
|
|
|
/* USER CODE END SPI1_MspInit 0 */
|
|
/* SPI1 clock enable */
|
|
__HAL_RCC_SPI1_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
/**SPI1 GPIO Configuration
|
|
PB3 ------> SPI1_SCK
|
|
PB4 ------> SPI1_MISO
|
|
PB5 ------> SPI1_MOSI
|
|
*/
|
|
GPIO_InitStruct.Pin = SPI_R_SCK_Pin|SPI_R_MISO_Pin|SPI_R_MOSI_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN SPI1_MspInit 1 */
|
|
|
|
// SD Card need faster spi gpio
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
|
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
|
|
/* USER CODE END SPI1_MspInit 1 */
|
|
}
|
|
else if(spiHandle->Instance==SPI2)
|
|
{
|
|
/* USER CODE BEGIN SPI2_MspInit 0 */
|
|
|
|
/* USER CODE END SPI2_MspInit 0 */
|
|
/* SPI2 clock enable */
|
|
__HAL_RCC_SPI2_CLK_ENABLE();
|
|
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
|
/**SPI2 GPIO Configuration
|
|
PB15 ------> SPI2_MOSI
|
|
PD1 ------> SPI2_SCK
|
|
*/
|
|
GPIO_InitStruct.Pin = SPI_D_MOSI_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
|
HAL_GPIO_Init(SPI_D_MOSI_GPIO_Port, &GPIO_InitStruct);
|
|
|
|
GPIO_InitStruct.Pin = SPI_D_SCK_Pin;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStruct.Alternate = GPIO_AF5_SPI2;
|
|
HAL_GPIO_Init(SPI_D_SCK_GPIO_Port, &GPIO_InitStruct);
|
|
|
|
/* USER CODE BEGIN SPI2_MspInit 1 */
|
|
|
|
/* USER CODE END SPI2_MspInit 1 */
|
|
}
|
|
}
|
|
|
|
void HAL_SPI_MspDeInit(SPI_HandleTypeDef* spiHandle)
|
|
{
|
|
|
|
if(spiHandle->Instance==SPI1)
|
|
{
|
|
/* USER CODE BEGIN SPI1_MspDeInit 0 */
|
|
|
|
/* USER CODE END SPI1_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_SPI1_CLK_DISABLE();
|
|
|
|
/**SPI1 GPIO Configuration
|
|
PB3 ------> SPI1_SCK
|
|
PB4 ------> SPI1_MISO
|
|
PB5 ------> SPI1_MOSI
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOB, SPI_R_SCK_Pin|SPI_R_MISO_Pin|SPI_R_MOSI_Pin);
|
|
|
|
/* USER CODE BEGIN SPI1_MspDeInit 1 */
|
|
|
|
/* USER CODE END SPI1_MspDeInit 1 */
|
|
}
|
|
else if(spiHandle->Instance==SPI2)
|
|
{
|
|
/* USER CODE BEGIN SPI2_MspDeInit 0 */
|
|
|
|
/* USER CODE END SPI2_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_SPI2_CLK_DISABLE();
|
|
|
|
/**SPI2 GPIO Configuration
|
|
PB15 ------> SPI2_MOSI
|
|
PD1 ------> SPI2_SCK
|
|
*/
|
|
HAL_GPIO_DeInit(SPI_D_MOSI_GPIO_Port, SPI_D_MOSI_Pin);
|
|
|
|
HAL_GPIO_DeInit(SPI_D_SCK_GPIO_Port, SPI_D_SCK_Pin);
|
|
|
|
/* USER CODE BEGIN SPI2_MspDeInit 1 */
|
|
|
|
/* USER CODE END SPI2_MspDeInit 1 */
|
|
}
|
|
}
|
|
|
|
/* USER CODE BEGIN 1 */
|
|
|
|
void NFC_SPI_Reconfigure() {
|
|
if (HAL_SPI_DeInit(&SPI_R) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
|
|
SPI_R.Init.Mode = SPI_MODE_MASTER;
|
|
SPI_R.Init.Direction = SPI_DIRECTION_2LINES;
|
|
SPI_R.Init.DataSize = SPI_DATASIZE_8BIT;
|
|
SPI_R.Init.CLKPolarity = SPI_POLARITY_LOW;
|
|
SPI_R.Init.CLKPhase = SPI_PHASE_2EDGE;
|
|
SPI_R.Init.NSS = SPI_NSS_SOFT;
|
|
SPI_R.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8; // 8mhz, 10mhz is max
|
|
SPI_R.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
|
SPI_R.Init.TIMode = SPI_TIMODE_DISABLE;
|
|
SPI_R.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
|
SPI_R.Init.CRCPolynomial = 7;
|
|
SPI_R.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
|
SPI_R.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
|
|
|
|
if (HAL_SPI_Init(&SPI_R) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
void SD_SPI_Reconfigure_Slow(void) {
|
|
if (HAL_SPI_DeInit(&SPI_SD_HANDLE) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
|
|
SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
|
|
SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
|
|
SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
|
|
SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
|
|
SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
|
|
SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
|
|
SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256;
|
|
SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
|
SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
|
|
SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
|
SPI_SD_HANDLE.Init.CRCPolynomial = 7;
|
|
SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
|
SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
|
|
|
|
if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
void SD_SPI_Reconfigure_Fast(void) {
|
|
if(HAL_SPI_DeInit(&SPI_SD_HANDLE) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
|
|
SPI_SD_HANDLE.Init.Mode = SPI_MODE_MASTER;
|
|
SPI_SD_HANDLE.Init.Direction = SPI_DIRECTION_2LINES;
|
|
SPI_SD_HANDLE.Init.DataSize = SPI_DATASIZE_8BIT;
|
|
SPI_SD_HANDLE.Init.CLKPolarity = SPI_POLARITY_LOW;
|
|
SPI_SD_HANDLE.Init.CLKPhase = SPI_PHASE_1EDGE;
|
|
SPI_SD_HANDLE.Init.NSS = SPI_NSS_SOFT;
|
|
SPI_SD_HANDLE.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2;
|
|
SPI_SD_HANDLE.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
|
SPI_SD_HANDLE.Init.TIMode = SPI_TIMODE_DISABLE;
|
|
SPI_SD_HANDLE.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
|
SPI_SD_HANDLE.Init.CRCPolynomial = 7;
|
|
SPI_SD_HANDLE.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
|
SPI_SD_HANDLE.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
|
|
|
|
if(HAL_SPI_Init(&SPI_SD_HANDLE) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
void CC1101_SPI_Reconfigure(void) {
|
|
if(HAL_SPI_DeInit(&SPI_R) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
|
|
SPI_R.Init.Mode = SPI_MODE_MASTER;
|
|
SPI_R.Init.Direction = SPI_DIRECTION_2LINES;
|
|
SPI_R.Init.DataSize = SPI_DATASIZE_8BIT;
|
|
SPI_R.Init.CLKPolarity = SPI_POLARITY_LOW;
|
|
SPI_R.Init.CLKPhase = SPI_PHASE_1EDGE;
|
|
SPI_R.Init.NSS = SPI_NSS_SOFT;
|
|
SPI_R.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_64;
|
|
SPI_R.Init.FirstBit = SPI_FIRSTBIT_MSB;
|
|
SPI_R.Init.TIMode = SPI_TIMODE_DISABLE;
|
|
SPI_R.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
|
|
SPI_R.Init.CRCPolynomial = 7;
|
|
SPI_R.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
|
|
SPI_R.Init.NSSPMode = SPI_NSS_PULSE_DISABLE;
|
|
|
|
if(HAL_SPI_Init(&SPI_R) != HAL_OK) {
|
|
Error_Handler();
|
|
}
|
|
}
|
|
|
|
/* USER CODE END 1 */
|
|
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|