128 lines
3.6 KiB
Markdown
128 lines
3.6 KiB
Markdown
# Controls
|
|
|
|
Flipper Zero have 5 button directional pad.
|
|
Buttons `← Left`, `→ Right`, `↑ Up`, `↓ Down` can be pressed only one at a time, and **CAN'T BE used in combination**.
|
|
Buttons `◉ OK` and `⮌ Back` is independed from other buttons and can be used for combinations.
|
|
|
|
```
|
|
Up
|
|
↑
|
|
Left ← (OK) → Right
|
|
↓
|
|
Down ⮌ Back
|
|
```
|
|
|
|
|
|
|
|
On directinal pad only one button out of 4 can be pressed at once. `◉ OK` and `⮌ Back` buttons are indepandent.
|
|
|
|
# Reboot combination
|
|
|
|
Reset combination triggers hard reboot that cannot be intercepted by any software. Used when application freezes or as normal way to reboot device.
|
|
|
|
1. Press and hold `Left ←` + `⮌ Back` for reset
|
|
2. Release to normal boot
|
|
|
|
|
|
|
|
# Reboot to Bootloader (Firmware update mode)
|
|
|
|
Same as hard reboot, but stay in Firmware Update mode after boot. Useful when firmware is broken and user cannot boot in normal mode.
|
|
|
|
1. Press and hold `Left ←` + `⮌ Back` for reset
|
|
2. Release `Left ←` and keep holding `⮌ Back` until `Firmware Update` mode appears
|
|
3. Release `⮌ Back`
|
|
|
|
To exit from `Firmware Update` mode use [reboot combination](#reboot-combination)
|
|
|
|
|
|
|
|
# DFU mode (Rescue mode)
|
|
|
|
Reboot to rescue DFU mode. Useful when firmware and bootloader is broken.
|
|
|
|
1. Press and hold `Left ←` + `⮌ Back` + `◉ OK`
|
|
2. Release `Left ←` + `⮌ Back` and keep `◉ OK` pressed
|
|
3. Release `◉ OK`
|
|
|
|
To exit from `Firmware Update` mode use [reboot combination](#reboot-combination)
|
|
|
|
|
|
|
|
# Menu structure
|
|
|
|
|
|
|
|
# Standby screen
|
|
|
|
On standby screen we can see battery, status bar and dolphin animation. Animation can cover the status bar according to the battery charge width.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
## Status Bar Icons
|
|
|
|
- SD Card mounted
|
|
- SD Card failed
|
|
- USB connected
|
|
|
|
|
|
|
|
# Main menu
|
|
|
|
Active row is always in the middle of the screen.
|
|
|
|
|
|
|
|
### Active row
|
|
|
|
Font: `u8g2_font_Born2bSportyV2_tf`
|
|
Size: 9 px
|
|
|
|
|
|
|
|
### Non-active row
|
|
|
|
Font: `u8g2_font_HelvetiPixel_tr`
|
|
Size: 8 px
|
|
|
|
|
|
|
|
### Icon
|
|
|
|
|
|
|
|
### Scrollbar
|
|
|
|
Scrollbar has 32 dots and a simple thumb.
|
|
|
|
|
|
|
|
# Application menu
|
|
|
|
Font: `u8g2_font_HelvetiPixel_tr`
|
|
Size: 8 px
|
|
|
|
|
|
|
|
# Application screen with buttons
|
|
|
|
Font: `u8g2_font_HelvetiPixel_tr`
|
|
Size: 8 px
|
|
|
|
Minimum button width is 38 px.
|
|
Maximum button width is 63 px.
|
|
|
|
|
|
|
|
# Pass-code lock
|
|
|
|
Flipper will store your secrets like U2F token and house keys. What if Flipper gets lost?
|
|
|
|
Well, no problem! For this case, we made a locking feature. You can lock Flipper and unlock it with the special pass-combo, like in good old fighting games (for example, →↑↑←↓↑↓). Users can set a pass-combo of any length, and all functions will be blocked until the combo is entered, including firmware flashing.
|
|
|
|
|