Syster Services
This commit is contained in:
Elizabeth Cray
parent
510f321833
commit
d07bd68db4
19
config/services/klipper.service
Normal file
19
config/services/klipper.service
Normal file
@ -0,0 +1,19 @@
|
||||
[Unit]
|
||||
Description=Klipper 3D Printer Firmware - PRINTERNAME
|
||||
Documentation=https://www.klipper3d.org/
|
||||
After=network-online.target
|
||||
Before=moonraker.service
|
||||
Wants=udev.target
|
||||
|
||||
[Install]
|
||||
WantedBy=multi-user.target
|
||||
|
||||
[Service]
|
||||
Type=simple
|
||||
User=pi
|
||||
RemainAfterExit=yes
|
||||
WorkingDirectory=/home/pi/PRINTERNAME/klipper
|
||||
EnvironmentFile=/home/pi/PRINTERNAME/printer_data/systemd/klipper.env
|
||||
ExecStart=/home/pi/PRINTERNAME/klippy-env/bin/python $KLIPPER_ARGS
|
||||
Restart=always
|
||||
RestartSec=10
|
||||
18
config/services/moonraker.service
Normal file
18
config/services/moonraker.service
Normal file
@ -0,0 +1,18 @@
|
||||
# systemd service file for moonraker
|
||||
[Unit]
|
||||
Description=API Server for Klipper - PRINTERNAME
|
||||
Requires=network-online.target
|
||||
After=network-online.target
|
||||
|
||||
[Install]
|
||||
WantedBy=multi-user.target
|
||||
|
||||
[Service]
|
||||
Type=simple
|
||||
User=pi
|
||||
SupplementaryGroups=moonraker-admin
|
||||
RemainAfterExit=yes
|
||||
EnvironmentFile=/home/pi/PRINTERNAME/printer_data/systemd/moonraker.env
|
||||
ExecStart=/home/pi/PRINTERNAME/moonraker-env/bin/python $MOONRAKER_ARGS
|
||||
Restart=always
|
||||
RestartSec=10
|
||||
@ -1,294 +0,0 @@
|
||||
## Client klipper macro definitions
|
||||
##
|
||||
## Copyright (C) 2022 Alex Zellner <alexander.zellner@googlemail.com>
|
||||
##
|
||||
## This file may be distributed under the terms of the GNU GPLv3 license
|
||||
##
|
||||
## !!! This file is read-only. Maybe the used editor indicates that. !!!
|
||||
##
|
||||
## Customization:
|
||||
## 1) copy the gcode_macro _CLIENT_VARIABLE (see below) to your printer.cfg
|
||||
## 2) remove the comment mark (#) from all lines
|
||||
## 3) change any value in there to your needs
|
||||
##
|
||||
## Use the PAUSE macro direct in your M600:
|
||||
## e.g. with a different park position front left and a minimal height of 50
|
||||
## [gcode_macro M600]
|
||||
## description: Filament change
|
||||
## gcode: PAUSE X=10 Y=10 Z_MIN=50
|
||||
## Z_MIN will park the toolhead at a minimum of 50 mm above to bed to make it easier for you to swap filament.
|
||||
##
|
||||
## Client variable macro for your printer.cfg
|
||||
#[gcode_macro _CLIENT_VARIABLE]
|
||||
#variable_use_custom_pos : False ; use custom park coordinates for x,y [True/False]
|
||||
#variable_custom_park_x : 0.0 ; custom x position; value must be within your defined min and max of X
|
||||
#variable_custom_park_y : 0.0 ; custom y position; value must be within your defined min and max of Y
|
||||
#variable_custom_park_dz : 2.0 ; custom dz value; the value in mm to lift the nozzle when move to park position
|
||||
#variable_retract : 1.0 ; the value to retract while PAUSE
|
||||
#variable_cancel_retract : 5.0 ; the value to retract while CANCEL_PRINT
|
||||
#variable_speed_retract : 35.0 ; retract speed in mm/s
|
||||
#variable_unretract : 1.0 ; the value to unretract while RESUME
|
||||
#variable_speed_unretract : 35.0 ; unretract speed in mm/s
|
||||
#variable_speed_hop : 15.0 ; z move speed in mm/s
|
||||
#variable_speed_move : 100.0 ; move speed in mm/s
|
||||
#variable_park_at_cancel : False ; allow to move the toolhead to park while execute CANCEL_PRINT [True/False]
|
||||
#variable_park_at_cancel_x : None ; different park position during CANCEL_PRINT [None/Position as Float]; park_at_cancel must be True
|
||||
#variable_park_at_cancel_y : None ; different park position during CANCEL_PRINT [None/Position as Float]; park_at_cancel must be True
|
||||
## !!! Caution [firmware_retraction] must be defined in the printer.cfg if you set use_fw_retract: True !!!
|
||||
#variable_use_fw_retract : False ; use fw_retraction instead of the manual version [True/False]
|
||||
#variable_idle_timeout : 0 ; time in sec until idle_timeout kicks in. Value 0 means that no value will be set or restored
|
||||
#variable_runout_sensor : "" ; If a sensor is defined, it will be used to cancel the execution of RESUME in case no filament is detected.
|
||||
## Specify the config name of the runout sensor e.g "filament_switch_sensor runout". Hint use the same as in your printer.cfg
|
||||
## !!! Custom macros, please use with care and review the section of the corresponding macro.
|
||||
## These macros are for simple operations like setting a status LED. Please make sure your macro does not interfere with the basic macro functions.
|
||||
## Only single line commands are supported, please create a macro if you need more than one command.
|
||||
#variable_user_pause_macro : "" ; Everything inside the "" will be executed after the klipper base pause (PAUSE_BASE) function
|
||||
#variable_user_resume_macro: "" ; Everything inside the "" will be executed before the klipper base resume (RESUME_BASE) function
|
||||
#variable_user_cancel_macro: "" ; Everything inside the "" will be executed before the klipper base cancel (CANCEL_PRINT_BASE) function
|
||||
#gcode:
|
||||
|
||||
[virtual_sdcard]
|
||||
path: ~/taz/printer_data_taz/gcodes
|
||||
on_error_gcode: CANCEL_PRINT
|
||||
|
||||
[pause_resume]
|
||||
#recover_velocity: 50.
|
||||
# When capture/restore is enabled, the speed at which to return to
|
||||
# the captured position (in mm/s). Default is 50.0 mm/s.
|
||||
|
||||
[display_status]
|
||||
|
||||
[respond]
|
||||
|
||||
[gcode_macro CANCEL_PRINT]
|
||||
description: Cancel the actual running print
|
||||
rename_existing: CANCEL_PRINT_BASE
|
||||
gcode:
|
||||
##### get user parameters or use default #####
|
||||
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
|
||||
{% set allow_park = client.park_at_cancel|default(false)|lower == 'true' %}
|
||||
{% set retract = client.cancel_retract|default(5.0)|abs %}
|
||||
##### define park position #####
|
||||
{% set park_x = "" if (client.park_at_cancel_x|default(none) is none)
|
||||
else "X=" ~ client.park_at_cancel_x %}
|
||||
{% set park_y = "" if (client.park_at_cancel_y|default(none) is none)
|
||||
else "Y=" ~ client.park_at_cancel_y %}
|
||||
{% set custom_park = park_x|length > 0 or park_y|length > 0 %}
|
||||
##### end of definitions #####
|
||||
# restore idle_timeout time if needed
|
||||
{% if printer['gcode_macro RESUME'].restore_idle_timeout > 0 %}
|
||||
SET_IDLE_TIMEOUT TIMEOUT={printer['gcode_macro RESUME'].restore_idle_timeout}
|
||||
{% endif %}
|
||||
{% if (custom_park or not printer.pause_resume.is_paused) and allow_park %} _TOOLHEAD_PARK_PAUSE_CANCEL {park_x} {park_y} {% endif %}
|
||||
_CLIENT_RETRACT LENGTH={retract}
|
||||
TURN_OFF_HEATERS
|
||||
M106 S0
|
||||
{client.user_cancel_macro|default("")}
|
||||
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
|
||||
# clear pause_next_layer and pause_at_layer as preparation for next print
|
||||
SET_PAUSE_NEXT_LAYER ENABLE=0
|
||||
SET_PAUSE_AT_LAYER ENABLE=0 LAYER=0
|
||||
CANCEL_PRINT_BASE
|
||||
|
||||
[gcode_macro PAUSE]
|
||||
description: Pause the actual running print
|
||||
rename_existing: PAUSE_BASE
|
||||
gcode:
|
||||
##### get user parameters or use default #####
|
||||
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
|
||||
{% set idle_timeout = client.idle_timeout|default(0) %}
|
||||
{% set temp = printer[printer.toolhead.extruder].target if printer.toolhead.extruder != '' else 0 %}
|
||||
{% set restore = False if printer.toolhead.extruder == ''
|
||||
else True if params.RESTORE|default(1)|int == 1 else False %}
|
||||
##### end of definitions #####
|
||||
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=last_extruder_temp VALUE="{{'restore': restore, 'temp': temp}}"
|
||||
# set a new idle_timeout value
|
||||
{% if idle_timeout > 0 %}
|
||||
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=restore_idle_timeout VALUE={printer.configfile.settings.idle_timeout.timeout}
|
||||
SET_IDLE_TIMEOUT TIMEOUT={idle_timeout}
|
||||
{% endif %}
|
||||
PAUSE_BASE
|
||||
{client.user_pause_macro|default("")}
|
||||
_TOOLHEAD_PARK_PAUSE_CANCEL {rawparams}
|
||||
|
||||
[gcode_macro RESUME]
|
||||
description: Resume the actual running print
|
||||
rename_existing: RESUME_BASE
|
||||
variable_last_extruder_temp: {'restore': False, 'temp': 0}
|
||||
variable_restore_idle_timeout: 0
|
||||
variable_idle_state: False
|
||||
gcode:
|
||||
##### get user parameters or use default #####
|
||||
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
|
||||
{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
|
||||
{% set sp_move = client.speed_move|default(velocity) %}
|
||||
{% set runout_resume = True if client.runout_sensor|default("") == "" # no runout
|
||||
else True if not printer[client.runout_sensor].enabled # sensor is disabled
|
||||
else printer[client.runout_sensor].filament_detected %} # sensor status
|
||||
{% set can_extrude = True if printer.toolhead.extruder == '' # no extruder defined in config
|
||||
else printer[printer.toolhead.extruder].can_extrude %} # status of active extruder
|
||||
{% set do_resume = False %}
|
||||
{% set prompt_txt = [] %}
|
||||
##### end of definitions #####
|
||||
#### Printer comming from timeout idle state ####
|
||||
{% if printer.idle_timeout.state|upper == "IDLE" or idle_state %}
|
||||
SET_GCODE_VARIABLE MACRO=RESUME VARIABLE=idle_state VALUE=False
|
||||
{% if last_extruder_temp.restore %}
|
||||
# we need to use the unicode (\u00B0) for the ° as py2 env's would throw an error otherwise
|
||||
RESPOND TYPE=echo MSG='{"Restoring \"%s\" temperature to %3.1f\u00B0C, this may take some time" % (printer.toolhead.extruder, last_extruder_temp.temp) }'
|
||||
M109 S{last_extruder_temp.temp}
|
||||
{% set do_resume = True %}
|
||||
{% elif can_extrude %}
|
||||
{% set do_resume = True %}
|
||||
{% else %}
|
||||
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
|
||||
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
|
||||
{% endif %}
|
||||
#### Printer comming out of regular PAUSE state ####
|
||||
{% elif can_extrude %}
|
||||
{% set do_resume = True %}
|
||||
{% else %}
|
||||
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder}'
|
||||
{% set _d = prompt_txt.append("\"%s\" not hot enough, please heat up again and press RESUME" % printer.toolhead.extruder) %}
|
||||
{% endif %}
|
||||
{% if runout_resume %}
|
||||
{% if do_resume %}
|
||||
{% if restore_idle_timeout > 0 %} SET_IDLE_TIMEOUT TIMEOUT={restore_idle_timeout} {% endif %} # restore idle_timeout time
|
||||
{client.user_resume_macro|default("")}
|
||||
_CLIENT_EXTRUDE
|
||||
RESUME_BASE VELOCITY={params.VELOCITY|default(sp_move)}
|
||||
{% endif %}
|
||||
{% else %}
|
||||
RESPOND TYPE=error MSG='{"Resume aborted !!! \"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]}'
|
||||
{% set _d = prompt_txt.append("\"%s\" detects no filament, please load filament and press RESUME" % (client.runout_sensor.split(" "))[1]) %}
|
||||
{% endif %}
|
||||
##### Generate User Information box in case of abort #####
|
||||
{% if not (runout_resume and do_resume) %}
|
||||
RESPOND TYPE=command MSG="action:prompt_begin RESUME aborted !!!"
|
||||
{% for element in prompt_txt %}
|
||||
RESPOND TYPE=command MSG='{"action:prompt_text %s" % element}'
|
||||
{% endfor %}
|
||||
RESPOND TYPE=command MSG="action:prompt_footer_button Ok|RESPOND TYPE=command MSG=action:prompt_end|info"
|
||||
RESPOND TYPE=command MSG="action:prompt_show"
|
||||
{% endif %}
|
||||
|
||||
# Usage: SET_PAUSE_NEXT_LAYER [ENABLE=[0|1]] [MACRO=<name>]
|
||||
[gcode_macro SET_PAUSE_NEXT_LAYER]
|
||||
description: Enable a pause if the next layer is reached
|
||||
gcode:
|
||||
{% set pause_next_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_next_layer %}
|
||||
{% set ENABLE = params.ENABLE|default(1)|int != 0 %}
|
||||
{% set MACRO = params.MACRO|default(pause_next_layer.call, True) %}
|
||||
SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_next_layer VALUE="{{ 'enable': ENABLE, 'call': MACRO }}"
|
||||
|
||||
# Usage: SET_PAUSE_AT_LAYER [ENABLE=[0|1]] [LAYER=<number>] [MACRO=<name>]
|
||||
[gcode_macro SET_PAUSE_AT_LAYER]
|
||||
description: Enable/disable a pause if a given layer number is reached
|
||||
gcode:
|
||||
{% set pause_at_layer = printer['gcode_macro SET_PRINT_STATS_INFO'].pause_at_layer %}
|
||||
{% set ENABLE = params.ENABLE|int != 0 if params.ENABLE is defined
|
||||
else params.LAYER is defined %}
|
||||
{% set LAYER = params.LAYER|default(pause_at_layer.layer)|int %}
|
||||
{% set MACRO = params.MACRO|default(pause_at_layer.call, True) %}
|
||||
SET_GCODE_VARIABLE MACRO=SET_PRINT_STATS_INFO VARIABLE=pause_at_layer VALUE="{{ 'enable': ENABLE, 'layer': LAYER, 'call': MACRO }}"
|
||||
|
||||
# Usage: SET_PRINT_STATS_INFO [TOTAL_LAYER=<total_layer_count>] [CURRENT_LAYER= <current_layer>]
|
||||
[gcode_macro SET_PRINT_STATS_INFO]
|
||||
rename_existing: SET_PRINT_STATS_INFO_BASE
|
||||
description: Overwrite, to get pause_next_layer and pause_at_layer feature
|
||||
variable_pause_next_layer: { 'enable': False, 'call': "PAUSE" }
|
||||
variable_pause_at_layer : { 'enable': False, 'layer': 0, 'call': "PAUSE" }
|
||||
gcode:
|
||||
{% if pause_next_layer.enable %}
|
||||
RESPOND TYPE=echo MSG='{"%s, forced by pause_next_layer" % pause_next_layer.call}'
|
||||
{pause_next_layer.call} ; execute the given gcode to pause, should be either M600 or PAUSE
|
||||
SET_PAUSE_NEXT_LAYER ENABLE=0
|
||||
{% elif pause_at_layer.enable and params.CURRENT_LAYER is defined and params.CURRENT_LAYER|int == pause_at_layer.layer %}
|
||||
RESPOND TYPE=echo MSG='{"%s, forced by pause_at_layer [%d]" % (pause_at_layer.call, pause_at_layer.layer)}'
|
||||
{pause_at_layer.call} ; execute the given gcode to pause, should be either M600 or PAUSE
|
||||
SET_PAUSE_AT_LAYER ENABLE=0
|
||||
{% endif %}
|
||||
SET_PRINT_STATS_INFO_BASE {rawparams}
|
||||
|
||||
##### internal use #####
|
||||
[gcode_macro _TOOLHEAD_PARK_PAUSE_CANCEL]
|
||||
description: Helper: park toolhead used in PAUSE and CANCEL_PRINT
|
||||
gcode:
|
||||
##### get user parameters or use default #####
|
||||
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
|
||||
{% set velocity = printer.configfile.settings.pause_resume.recover_velocity %}
|
||||
{% set use_custom = client.use_custom_pos|default(false)|lower == 'true' %}
|
||||
{% set custom_park_x = client.custom_park_x|default(0.0) %}
|
||||
{% set custom_park_y = client.custom_park_y|default(0.0) %}
|
||||
{% set park_dz = client.custom_park_dz|default(2.0)|abs %}
|
||||
{% set sp_hop = client.speed_hop|default(15) * 60 %}
|
||||
{% set sp_move = client.speed_move|default(velocity) * 60 %}
|
||||
##### get config and toolhead values #####
|
||||
{% set origin = printer.gcode_move.homing_origin %}
|
||||
{% set act = printer.gcode_move.gcode_position %}
|
||||
{% set max = printer.toolhead.axis_maximum %}
|
||||
{% set cone = printer.toolhead.cone_start_z|default(max.z) %} ; height as long the toolhead can reach max and min of an delta
|
||||
{% set round_bed = True if printer.configfile.settings.printer.kinematics is in ['delta','polar','rotary_delta','winch']
|
||||
else False %}
|
||||
##### define park position #####
|
||||
{% set z_min = params.Z_MIN|default(0)|float %}
|
||||
{% set z_park = [[(act.z + park_dz), z_min]|max, (max.z - origin.z)]|min %}
|
||||
{% set x_park = params.X if params.X is defined
|
||||
else custom_park_x if use_custom
|
||||
else 0.0 if round_bed
|
||||
else (max.x - 5.0) %}
|
||||
{% set y_park = params.Y if params.Y is defined
|
||||
else custom_park_y if use_custom
|
||||
else (max.y - 5.0) if round_bed and z_park < cone
|
||||
else 0.0 if round_bed
|
||||
else (max.y - 5.0) %}
|
||||
##### end of definitions #####
|
||||
_CLIENT_RETRACT
|
||||
{% if "xyz" in printer.toolhead.homed_axes %}
|
||||
G90
|
||||
G1 Z{z_park} F{sp_hop}
|
||||
G1 X{x_park} Y{y_park} F{sp_move}
|
||||
{% if not printer.gcode_move.absolute_coordinates %} G91 {% endif %}
|
||||
{% else %}
|
||||
RESPOND TYPE=echo MSG='Printer not homed'
|
||||
{% endif %}
|
||||
|
||||
[gcode_macro _CLIENT_EXTRUDE]
|
||||
description: Extrudes, if the extruder is hot enough
|
||||
gcode:
|
||||
##### get user parameters or use default #####
|
||||
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
|
||||
{% set use_fw_retract = (client.use_fw_retract|default(false)|lower == 'true') and (printer.firmware_retraction is defined) %}
|
||||
{% set length = params.LENGTH|default(client.unretract)|default(1.0)|float %}
|
||||
{% set speed = params.SPEED|default(client.speed_unretract)|default(35) %}
|
||||
{% set absolute_extrude = printer.gcode_move.absolute_extrude %}
|
||||
##### end of definitions #####
|
||||
{% if printer.toolhead.extruder != '' %}
|
||||
{% if printer[printer.toolhead.extruder].can_extrude %}
|
||||
{% if use_fw_retract %}
|
||||
{% if length < 0 %}
|
||||
G10
|
||||
{% else %}
|
||||
G11
|
||||
{% endif %}
|
||||
{% else %}
|
||||
M83
|
||||
G1 E{length} F{(speed|float|abs) * 60}
|
||||
{% if absolute_extrude %}
|
||||
M82
|
||||
{% endif %}
|
||||
{% endif %}
|
||||
{% else %}
|
||||
RESPOND TYPE=echo MSG='{"\"%s\" not hot enough" % printer.toolhead.extruder}'
|
||||
{% endif %}
|
||||
{% endif %}
|
||||
|
||||
[gcode_macro _CLIENT_RETRACT]
|
||||
description: Retracts, if the extruder is hot enough
|
||||
gcode:
|
||||
{% set client = printer['gcode_macro _CLIENT_VARIABLE']|default({}) %}
|
||||
{% set length = params.LENGTH|default(client.retract)|default(1.0)|float %}
|
||||
{% set speed = params.SPEED|default(client.speed_retract)|default(35) %}
|
||||
|
||||
_CLIENT_EXTRUDE LENGTH=-{length|float|abs} SPEED={speed|float|abs}
|
||||
|
||||
@ -1 +1 @@
|
||||
CROWSNEST_ARGS="-c /home/pi/printer_data_taz/config/crowsnest.conf"
|
||||
CROWSNEST_ARGS="-c /home/pi/PRINTERNAME/printer_data/config/crowsnest.conf"
|
||||
|
||||
@ -1 +1 @@
|
||||
KLIPPER_ARGS="/home/pi/taz/klipper-taz/klippy/klippy.py /home/pi/taz/printer_data_taz/config/printer.cfg -l /home/pi/taz/printer_data_taz/logs/klippy.log -I /home/pi/taz/printer_data_taz/comms/klippy.serial -a /home/pi/taz/printer_data_taz/comms/klippy.sock"
|
||||
KLIPPER_ARGS="/home/pi/PRINTERNAME/klipper/klippy/klippy.py /home/pi/PRINTERNAME/printer_data/onfig/printer.cfg -l /home/pi/taz/printer_data_taz/logs/klippy.log -I /home/pi/taz/printer_data_taz/comms/klippy.serial -a /home/pi/taz/printer_data_taz/comms/klippy.sock"
|
||||
|
||||
@ -1,4 +1,4 @@
|
||||
MOONRAKER_DATA_PATH="/home/pi/taz/printer_data_taz"
|
||||
MOONRAKER_DATA_PATH="/home/pi/PRINTERDATA/printer_data"
|
||||
MOONRAKER_ARGS="-m moonraker"
|
||||
PYTHONPATH="/home/pi/taz/moonraker-taz"
|
||||
PYTHONPATH="/home/pi/PRINTERNAME/moonraker"
|
||||
|
||||
|
||||
61
setup.sh
61
setup.sh
@ -2,9 +2,6 @@
|
||||
ROOT_DIR="$(dirname "$0")"
|
||||
cd $ROOT_DIR
|
||||
|
||||
# TODO: add CMD line args
|
||||
# - skip makeconfig
|
||||
|
||||
# Pull Klipper
|
||||
git submodule update --init --recursive
|
||||
|
||||
@ -18,7 +15,7 @@ for f in ${CONFIG_FILES[@]}; do
|
||||
C+=($i $f)
|
||||
let i+=1
|
||||
done
|
||||
CONFIG_INDEX=$(dialog --backtitle "drwho@hackers.town" --title "Printer Selection" --menu "Select Printer Config" --output-fd 1 40 0 1 ${C[@]})
|
||||
CONFIG_INDEX=$(dialog --backtitle "drwho@hackers.town" --title "Printer Selection" --menu "Select Printer Config" --output-fd 1 40 0 1 ${C[@]} 3>&1 1>&2 2>&3)
|
||||
CONFIG_FILE=${CONFIG_FILES[$CONFIG_INDEX]}
|
||||
|
||||
# Select Serial Device
|
||||
@ -29,11 +26,17 @@ for f in ${DEVICES[@]}; do
|
||||
C+=($i $f)
|
||||
let i+=1
|
||||
done
|
||||
DEVICE_INDEX=$(dialog --backtitle "drwho@hackers.town" --title "USB Device Selection" --menu "Select USB Device" --output-fd 1 40 0 1 ${C[@]})
|
||||
DEVICE_INDEX=$(dialog --backtitle "drwho@hackers.town" --title "USB Device Selection" --menu "Select USB Device" --output-fd 1 40 0 1 ${C[@]} 3>&1 1>&2 2>&3)
|
||||
DEVICE=${DEVICES[$DEVICE_INDEX]}
|
||||
|
||||
# Name Printer
|
||||
PRINTER_NAME="$(dialog --backtitle \"drwho@hackers.town\" --title \"Printer Name\" --inputbox \"Name This Printer\" 8 40 3>&1 1>&2 2>&3)"
|
||||
NAME_NOT_VALID=true
|
||||
while $NAME_NOT_VALID ; do
|
||||
PRINTER_NAME="$(dialog --backtitle 'drwho@hackers.town' --inputbox 'Name This Printer' 8 40 'Print' 3>&1 1>&2 2>&3)"
|
||||
if [[ $PRINTER_NAME =~ ^[a-zA-Z0-9_-]+$ ]]; then
|
||||
NAME_NOT_VALID=false
|
||||
fi
|
||||
done
|
||||
|
||||
# Build Klipper
|
||||
cat ./config/$CONFIG_FILE | sed -e "s/^serial: .\+$/serial: \/dev\/serial\/by-id\/${DEVICE}/" > ./printer.cfg
|
||||
@ -43,20 +46,52 @@ make -j$(nproc)
|
||||
make flash FLASH_DEVICE=/dev/serial/by-id/$DEVICE
|
||||
|
||||
# Copy over printer config file
|
||||
cd $ROOT_DIR
|
||||
cp dirs/klipper/printer.cfg dirs/printer_data/config/printer.cfg
|
||||
cd $ROOT_DIR/dirs
|
||||
cat $ROOT_DIR/config/macros.gcode >> printer.cfg.tmp
|
||||
cat klipper/printer.cfg >> printer.cfg.tmp
|
||||
mv printer.cfg.tmp printer_data/config/printer.cfg
|
||||
|
||||
# Apply Edits to Configs
|
||||
cd $ROOT_DIR/dirs/print_data
|
||||
cat config/moonraker.conf | sed -e "s/PRINTERNAME/$PRINTER_NAME/g" > config/moonraker.conf.tmp
|
||||
mv config/moonraker.conf.tmp config/moonraker.conf
|
||||
|
||||
# Create Empty Dirs
|
||||
mkdir -p ~/PRINTER/logs
|
||||
mkdir -p ~/PRINTER/gcodes
|
||||
mkdir -p ~/PRINTER/certs
|
||||
mkdir -p ~/PRINTER/backup
|
||||
cat mainsail-config/client.cfg | sed -e "s/~\/printer_data/~\/$PRINTER_NAME\/printer_data/g" > mainsail-config/client.cfg.tmp
|
||||
mv mainsail-config/client.cfg.tmp mainsail-config/client.cfg
|
||||
|
||||
FILES=(crowsnest moonraker klipper)
|
||||
for f in ${FILES[@]}; do
|
||||
cat systemd/$f.service | sed -e "s/PRINTERNAME/$PRINTER_NAME/g" > systemd/$f.service.tmp
|
||||
mv systemd/$f.service.tmp systemd/$f.service
|
||||
done
|
||||
|
||||
# Download Mainsail
|
||||
cd $ROOT_DIR
|
||||
wget -q -O mainsail.zip https://github.com/mainsail-crew/mainsail/releases/latest/download/mainsail.zip
|
||||
unzip -o mainsail.zip -d dirs/mainsail
|
||||
|
||||
# Copy To Final Location
|
||||
mkdir -p ~/$PRINTER_NAME
|
||||
cp -r dirs/* ~/$PRINTER_NAME
|
||||
|
||||
# Create Empty Dirs
|
||||
DIRS=(logs gcodes certs backup mainsail-config)
|
||||
for d in ${DIRS[@]}; do
|
||||
mkdir -p "~/$PRINTER_NAME/$d"
|
||||
done
|
||||
|
||||
# Configure System Services
|
||||
cd $ROOT_DIR/config/services
|
||||
SERVICES=()
|
||||
for f in *.service; do
|
||||
SERVICES+=($f)
|
||||
cat $f | sed -e "s/PRINTERNAME/$PRINTER_NAME/g" > /etc/systemd/system/$PRINTERNAME-$f
|
||||
done
|
||||
|
||||
# Install System Services
|
||||
sudo cp $ROOT_DIR/config/services/* /etc/systemd/system/
|
||||
sudo systemctl daemon-reload
|
||||
for svc in ${SERVICES[@]}; do
|
||||
sudo systemctl enable $PRINTER_NAME-$svc
|
||||
sudo systemctl start $PRINTER_NAME-$svc
|
||||
done
|
||||
|
||||
Loading…
Reference in New Issue
Block a user