Updated Japanese and default, and re-generated all language files

rtdata/languages/default

@@ -1080,58 +1080,58 @@ TP_COLORAPP_TONECIE;Tone mapping using CIECAM02
 TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in Lab space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
 TP_COLORAPP_WBCAM;WB [RT+CAT02] + [output]
 TP_COLORAPP_WBRT;WB [RT] + [output]
-TP_COLORTONING_LABEL;Color Toning
-TP_COLORTONING_OPACITY;Opacity
-TP_COLORTONING_LUMAMODE;Preserve luminance
-TP_COLORTONING_LUMAMODE_TOOLTIP;If enabled, when you change color (red, green, cyan, blue, etc.) the luminance of each pixel is preserved.
-TP_COLORTONING_COLOR;Color
-TP_COLORTONING_LABCOL;Direct Colors
-TP_COLORTONING_LABCOL_TOOLTIP;When you move a saturation slider, these 'direct' colors are increased.
-TP_COLORTONING_LABINT;-
-TP_COLORTONING_LABINT_TOOLTIP;When the image color is blue and the blending color is red, it results in a magenta color in the function of % opacity.\nWhen the image color is red and the blending color is yellow, it results in an orange color in the function of % opacity.
-TP_COLORTONING_CHROMA;Opacity 'ab' or 'a'
+TP_COLORTONING_AB;o C/L
+TP_COLORTONING_AUTOSAT;Auto saturation
+TP_COLORTONING_BALANCE;Balance
+TP_COLORTONING_BALANCE_TOOLTIP;Equilibrate tones between shadows and highlights
+TP_COLORTONING_BY;o C/L
 TP_COLORTONING_CHROMA1;Opacity 'a'
 TP_COLORTONING_CHROMA2;Opacity 'b'
 TP_COLORTONING_CHROMAC;Opacity chroma
-TP_COLORTONING_AB;o C/L
-TP_COLORTONING_BY;o C/L
-TP_COLORTONING_LUMA;Luminance
+TP_COLORTONING_CHROMA;Opacity 'ab' or 'a'
+TP_COLORTONING_COLOR;Color
 TP_COLORTONING_CURVEEDITOR_LL;L
-TP_COLORTONING_METHOD;Method
-TP_COLORTONING_TWOSTD;Opacity standard chroma
-TP_COLORTONING_TWOALL;Opacity special chroma
-TP_COLORTONING_TWOBY;Opacity special 'a' and 'b'
-TP_COLORTONING_TWO2;Opacity special chroma 2 colors
-TP_COLORTONING_TWOCOLOR_TOOLTIP;Standard - linear response same for 'a' and 'b'\nSpecial chroma same response for 'a' and 'b', but without bound - try under the diagonal\nSpecial 'a' and 'b': as Special + first curve 'a' only - second curve 'b' only : dedicate for special effects\nSpecial 2 colors - more predictable
+TP_COLORTONING_HIGHLIGHT;Highlights
+TP_COLORTONING_HUE;Hue
 TP_COLORTONING_HUE;Hue blending only
+TP_COLORTONING_LABCOL;Direct Colors
+TP_COLORTONING_LABCOL_TOOLTIP;When you move a saturation slider, these 'direct' colors are increased.
+TP_COLORTONING_LABEL;Color Toning
+TP_COLORTONING_LABINT;-
+TP_COLORTONING_LABINT_TOOLTIP;When the image color is blue and the blending color is red, it results in a magenta color in the function of % opacity.\nWhen the image color is red and the blending color is yellow, it results in an orange color in the function of % opacity.
 TP_COLORTONING_LAB;Lab blending
 TP_COLORTONING_LCH;Lch blending
 TP_COLORTONING_LCH_1;Hue + XYZ
 TP_COLORTONING_LCH_2;XYZ blending
+TP_COLORTONING_LUMAMODE;Preserve luminance
+TP_COLORTONING_LUMAMODE_TOOLTIP;If enabled, when you change color (red, green, cyan, blue, etc.) the luminance of each pixel is preserved.
+TP_COLORTONING_LUMA;Luminance
+TP_COLORTONING_METHOD;Method
+TP_COLORTONING_METHOD_TOOLTIP;Lab blending use interpolation colour blending\nColor balance (Shadows Midtones Highlights)\nSplit Toning Colour SH+balance (Shadows Highlights + balance shadows/highlights) use direct colors\nIn all methods you can enabled Black and White 
+TP_COLORTONING_MIDTONES;Mid Tones
 TP_COLORTONING_NEUTRALCUR;Reset curves
 TP_COLORTONING_NEUTRALCUR_TIP;Reset all curves to default.
 TP_COLORTONING_NEUTRAL;Reset sliders
 TP_COLORTONING_NEUTRAL_TIP;Reset all values (Shadows Midtones Highlights) to default.
-TP_COLORTONING_SPLITCO;Split Toning Colour SMH
-TP_COLORTONING_SPLITCOCO;Color Balance SMH
-TP_COLORTONING_SPLITBAL;Split Toning Colour SH + balance
-TP_COLORTONING_SPLITLR;Split Toning Saturation 2 colors
-TP_COLORTONING_SATL;Saturation shadows
-TP_COLORTONING_SATH;Saturation highlights
-TP_COLORTONING_BALANCE;Balance
-TP_COLORTONING_STRPROTECT;Strength protection
-TP_COLORTONING_METHOD_TOOLTIP;Lab blending use interpolation colour blending\nColor balance (Shadows Midtones Highlights)\nSplit Toning Colour SH+balance (Shadows Highlights + balance shadows/highlights) use direct colors\nIn all methods you can enabled Black and White 
-TP_COLORTONING_BALANCE_TOOLTIP;Equilibrate tones between shadows and highlights
-TP_COLORTONING_RGBSLIDERS;RGB - Sliders
+TP_COLORTONING_OPACITY;Opacity
 TP_COLORTONING_RGBCURVES;RGB - Curves
-TP_COLORTONING_AUTOSAT;Auto saturation
-TP_COLORTONING_SATURATIONTHRESHOLD;Saturation protection threshold
+TP_COLORTONING_RGBSLIDERS;RGB - Sliders
+TP_COLORTONING_SATH;Saturation highlights
+TP_COLORTONING_SATL;Saturation shadows
 TP_COLORTONING_SATURATEDOPACITY;Saturation protection
+TP_COLORTONING_SATURATIONTHRESHOLD;Saturation protection threshold
 TP_COLORTONING_SHADOWS;Shadows
-TP_COLORTONING_MIDTONES;Mid Tones
-TP_COLORTONING_HIGHLIGHT;Highlights
+TP_COLORTONING_SPLITBAL;Split Toning Colour SH + balance
+TP_COLORTONING_SPLITCOCO;Color Balance SMH
+TP_COLORTONING_SPLITCO;Split Toning Colour SMH
+TP_COLORTONING_SPLITLR;Split Toning Saturation 2 colors
 TP_COLORTONING_STRENGTH;Strength
-TP_COLORTONING_HUE;Hue
+TP_COLORTONING_STRPROTECT;Strength protection
+TP_COLORTONING_TWO2;Opacity special chroma 2 colors
+TP_COLORTONING_TWOALL;Opacity special chroma
+TP_COLORTONING_TWOBY;Opacity special 'a' and 'b'
+TP_COLORTONING_TWOCOLOR_TOOLTIP;Standard - linear response same for 'a' and 'b'\nSpecial chroma same response for 'a' and 'b', but without bound - try under the diagonal\nSpecial 'a' and 'b': as Special + first curve 'a' only - second curve 'b' only : dedicate for special effects\nSpecial 2 colors - more predictable
+TP_COLORTONING_TWOSTD;Opacity standard chroma
 TP_CROP_FIXRATIO;Fix ratio:
 TP_CROP_GTDIAGONALS;Rule of Diagonals
 TP_CROP_GTEPASSPORT;Biometric Passport
@@ -1156,39 +1156,39 @@ TP_DARKFRAME_LABEL;Dark Frame
 TP_DEFRINGE_LABEL;Defringe
 TP_DEFRINGE_RADIUS;Radius
 TP_DEFRINGE_THRESHOLD;Threshold
+TP_DIRPYRDENOISE_33;3x3 strong
+TP_DIRPYRDENOISE_55SOFT;5x5
+TP_DIRPYRDENOISE_55;5x5 strong
+TP_DIRPYRDENOISE_77;7x7 (slow)
 TP_DIRPYRDENOISE_BLUE;Chrominance - Blue-Yellow
 TP_DIRPYRDENOISE_CHROMA;Chrominance - Master
 TP_DIRPYRDENOISE_ENABLED_TOOLTIP;Can be used on raw and non-raw images.\n\nFor non-raw images noise reduction of luminance depends on the gamma of the input color profile. An sRGB gamma is assumed, thus if the image uses an input color profile of a different gamma, the effects of luminance noise reduction will differ.
 TP_DIRPYRDENOISE_ENH;Enhanced mode
 TP_DIRPYRDENOISE_ENH_TOOLTIP;Increases noise reduction quality at the expense of a 20% processing time increase.
-TP_DIRPYRDENOISE_MED;Median - Luminance only
-TP_DIRPYRDENOISE_MET_TOOLTIP;Median filtering type:\n3x3, 3x3 strong and 5x5 (RGB) or 5x5 strong or 7x7 (L only and Lab) in the treatment - Increases noise reduction.
-TP_DIRPYRDENOISE_METM_TOOLTIP;When using the "Luminance only" and "Lab" methods, median filtering will be performed just after the wavelet step in the noise reduction pipeline.\nWhen using the "RGB" mode, it will be performed at the very end of the noise reduction pipeline.
 TP_DIRPYRDENOISE_GAMMA;Gamma
 TP_DIRPYRDENOISE_GAMMA_TOOLTIP;Gamma varies noise reduction strength across the range of tones. Smaller values will target shadows, while larger values will stretch the effect to the brighter tones.
 TP_DIRPYRDENOISE_LABEL;Noise Reduction
+TP_DIRPYRDENOISE_LABM;Lab
 TP_DIRPYRDENOISE_LAB;Lab
 TP_DIRPYRDENOISE_LDETAIL;Luminance Detail
+TP_DIRPYRDENOISE_LM;Luminance only
 TP_DIRPYRDENOISE_LUMA;Luminance
+TP_DIRPYRDENOISE_MEDMETHOD;Median method
+TP_DIRPYRDENOISE_MEDTYPE;Median type
+TP_DIRPYRDENOISE_MED;Median - Luminance only
+TP_DIRPYRDENOISE_MED_TOOLTIP;-
 TP_DIRPYRDENOISE_METHOD;Method
 TP_DIRPYRDENOISE_METHOD_TOOLTIP;For raw images either RGB or Lab methods can be used.\n\nFor non-raw images the Lab method will be used, regardless of the selection.
+TP_DIRPYRDENOISE_METM_TOOLTIP;When using the "Luminance only" and "Lab" methods, median filtering will be performed just after the wavelet step in the noise reduction pipeline.\nWhen using the "RGB" mode, it will be performed at the very end of the noise reduction pipeline.
+TP_DIRPYRDENOISE_MET_TOOLTIP;Apply a median filter of the desired size. The larger the size, the longer it takes.\n\n3x3 soft: treats 5 pixels in a 1-pixel range.\n3x3: treats 9 pixels in a 1-pixel range.\n5x5 soft: treats 13 pixels in a 2-pixel range.\n5x5: treats 25 pixels in a 2-pixel range.\n7x7: treats 49 pixels in a 3-pixel range.\n\nSometimes it is possible to achieve higher quality running several iterations with a small range than one iteration with a large range.
+TP_DIRPYRDENOISE_NONE;None
+TP_DIRPYRDENOISE_PASSES_TOOLTIP;Applying a 3x3 median filter with three iterations often leads to better results than applying 7x7 once.
+TP_DIRPYRDENOISE_PASSE;Median iterations
 TP_DIRPYRDENOISE_PERF;RGB mode (raw images)
 TP_DIRPYRDENOISE_RED;Chrominance - Red-Green
-TP_DIRPYRDENOISE_RGB;RGB
-TP_DIRPYRDENOISE_MEDTYPE;Median type
-TP_DIRPYRDENOISE_MEDMETHOD;Median method
-TP_DIRPYRDENOISE_LM;Luminance only
-TP_DIRPYRDENOISE_LABM;Lab
 TP_DIRPYRDENOISE_RGBM;RGB
-TP_DIRPYRDENOISE_NONE;None
+TP_DIRPYRDENOISE_RGB;RGB
 TP_DIRPYRDENOISE_SOFT;3x3
-TP_DIRPYRDENOISE_33;3x3 strong
-TP_DIRPYRDENOISE_55;5x5 strong
-TP_DIRPYRDENOISE_55SOFT;5x5
-TP_DIRPYRDENOISE_77;7x7 (slow)
-TP_DIRPYRDENOISE_MED_TOOLTIP;-
-TP_DIRPYRDENOISE_PASSE;Median iterations
-TP_DIRPYRDENOISE_PASSES_TOOLTIP;Applying median filtering often leads to better results when done in small steps (iterations) than in one large one.
 TP_DIRPYREQUALIZER_ALGO;Algorithm Skin
 TP_DIRPYREQUALIZER_ALGO_FI;Fine
 TP_DIRPYREQUALIZER_ALGO_LA;Large
@@ -1216,8 +1216,6 @@ TP_EPD_REWEIGHTINGITERATES;Reweighting Iterates
 TP_EPD_SCALE;Scale
 TP_EPD_STRENGTH;Strength
 TP_EPD_TOOLTIP;Tone mapping is possible via Lab mode (standard) and CIECAM02 mode.\n\nTo engage CIECAM02 tone mapping mode enable the following settings:\n1. CIECAM02\n2. Algorithm="Brightness + Colorfulness (QM)"\n3. "Tone mapping using CIECAM02 brightness (Q)"
-TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
-TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
 TP_EXPOSURE_AUTOLEVELS;Auto Levels
 TP_EXPOSURE_AUTOLEVELS_TIP;Toggles execution of Auto Levels to automatically set Exposure slider values based on an image analysis.\nEnables Highlight Reconstruction if necessary.
 TP_EXPOSURE_BLACKLEVEL;Black
@@ -1240,6 +1238,8 @@ TP_EXPOSURE_TCMODE_LABEL2;Curve mode 2
 TP_EXPOSURE_TCMODE_SATANDVALBLENDING;Saturation and Value Blending
 TP_EXPOSURE_TCMODE_STANDARD;Standard
 TP_EXPOSURE_TCMODE_WEIGHTEDSTD;Weighted Standard
+TP_EXPOS_BLACKPOINT_LABEL;Raw Black Points
+TP_EXPOS_WHITEPOINT_LABEL;Raw White Points
 TP_FLATFIELD_AUTOSELECT;Auto-selection
 TP_FLATFIELD_BLURRADIUS;Blur Radius
 TP_FLATFIELD_BLURTYPE;Blur Type
@@ -1384,9 +1384,9 @@ TP_RAWEXPOS_BLACK_0;Green 1 (lead)
 TP_RAWEXPOS_BLACK_1;Red
 TP_RAWEXPOS_BLACK_2;Blue
 TP_RAWEXPOS_BLACK_3;Green 2
-TP_RAWEXPOS_BLACK_RED;Red
-TP_RAWEXPOS_BLACK_GREEN;Green
 TP_RAWEXPOS_BLACK_BLUE;Blue
+TP_RAWEXPOS_BLACK_GREEN;Green
+TP_RAWEXPOS_BLACK_RED;Red
 TP_RAWEXPOS_LINEAR;White Point Correction
 TP_RAWEXPOS_PRESER;Highlight Preservation
 TP_RAWEXPOS_RGB;Red, Green, Blue
@@ -1403,8 +1403,8 @@ TP_RAW_LABEL;Demosaicing
 TP_RAW_LMMSEITERATIONS;LMMSE Enhancement Steps
 TP_RAW_LMMSE_TOOLTIP;Adds gamma (step 1), median (steps 2-4) and refinement (steps 5-6) to reduce artifacts and improve the signal-to-noise ratio.
 TP_RAW_SENSOR_BAYER_LABEL;Sensor with Bayer matrix
-TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans matrix
 TP_RAW_SENSOR_XTRANS_DMETHOD_TOOLTIP;3-pass gives best results (recommended for low ISO images)\n1-pass is almost undistinguishable from 3-pass for high ISO images and is faster.
+TP_RAW_SENSOR_XTRANS_LABEL;Sensor with X-Trans matrix
 TP_RESIZE_APPLIESTO;Applies to:
 TP_RESIZE_BICUBICSF;Bicubic (Softer)
 TP_RESIZE_BICUBICSH;Bicubic (Sharper)