Removed irrelevant changes from 'rtdata/languages/default'

rtdata/languages/default

@@ -138,6 +138,7 @@ FILEBROWSER_PARTIALPASTEPROFILE;Paste - partial
 FILEBROWSER_PASTEPROFILE;Paste
 FILEBROWSER_POPUPCANCELJOB;Cancel job
 FILEBROWSER_POPUPCOLORLABEL;Color label
+FILEBROWSER_POPUPCOLORLABEL0;Label: None
 FILEBROWSER_POPUPCOLORLABEL1;Label: Red
 FILEBROWSER_POPUPCOLORLABEL2;Label: Yellow
 FILEBROWSER_POPUPCOLORLABEL3;Label: Green
@@ -155,6 +156,7 @@ FILEBROWSER_POPUPPROCESS;Put to queue
 FILEBROWSER_POPUPPROCESSFAST;Put to queue (Fast export)
 FILEBROWSER_POPUPPROFILEOPERATIONS;Processing profile operations
 FILEBROWSER_POPUPRANK;Rank
+FILEBROWSER_POPUPRANK0;Unrank
 FILEBROWSER_POPUPRANK1;Rank 1 *
 FILEBROWSER_POPUPRANK2;Rank 2 **
 FILEBROWSER_POPUPRANK3;Rank 3 ***
@@ -1441,8 +1443,8 @@ HISTORY_MSG_LOCALCONTRAST_DARKNESS;Local Contrast - Darkness
 HISTORY_MSG_LOCALCONTRAST_ENABLED;Local Contrast
 HISTORY_MSG_LOCALCONTRAST_LIGHTNESS;Local Contrast - Lightness
 HISTORY_MSG_LOCALCONTRAST_RADIUS;Local Contrast - Radius
-HISTORY_MSG_LOCALLAB_TE_PIVOT;Local - Equalizer pivot
 HISTORY_MSG_LOCAL_GAMUTMUNSEL;Local - Gamut-Munsell
+HISTORY_MSG_LOCALLAB_TE_PIVOT;Local - Equalizer pivot
 HISTORY_MSG_METADATA_MODE;Metadata copy mode
 HISTORY_MSG_MICROCONTRAST_CONTRAST;Microcontrast - Contrast threshold
 HISTORY_MSG_PDSHARPEN_AUTO_CONTRAST;CS - Auto threshold
@@ -1748,11 +1750,11 @@ PARTIALPASTE_EXPOSURE;Exposure
 PARTIALPASTE_FILMNEGATIVE;Film negative
 PARTIALPASTE_FILMSIMULATION;Film simulation
 PARTIALPASTE_FLATFIELDAUTOSELECT;Flat-field auto-selection
+PARTIALPASTE_FLATFIELDFROMMETADATA;Flat-field from Metadata
 PARTIALPASTE_FLATFIELDBLURRADIUS;Flat-field blur radius
 PARTIALPASTE_FLATFIELDBLURTYPE;Flat-field blur type
 PARTIALPASTE_FLATFIELDCLIPCONTROL;Flat-field clip control
 PARTIALPASTE_FLATFIELDFILE;Flat-field file
-PARTIALPASTE_FLATFIELDFROMMETADATA;Flat-field from Metadata
 PARTIALPASTE_GRADIENT;Graduated filter
 PARTIALPASTE_HSVEQUALIZER;HSV equalizer
 PARTIALPASTE_ICMSETTINGS;Color management settings
@@ -1838,6 +1840,7 @@ PREFERENCES_CHUNKSIZE_RAW_XT;Xtrans demosaic
 PREFERENCES_CHUNKSIZE_RGB;RGB processing
 PREFERENCES_CIE;Ciecam
 PREFERENCES_CIEARTIF;Avoid artifacts
+PREFERENCES_WBA;White Balance
 PREFERENCES_CLIPPINGIND;Clipping Indication
 PREFERENCES_CLUTSCACHE;HaldCLUT Cache
 PREFERENCES_CLUTSCACHE_LABEL;Maximum number of cached CLUTs
@@ -2006,7 +2009,6 @@ PREFERENCES_TOOLPANEL_TOOL;Tool
 PREFERENCES_TP_LABEL;Tool panel:
 PREFERENCES_TP_VSCROLLBAR;Hide vertical scrollbar
 PREFERENCES_USEBUNDLEDPROFILES;Use bundled profiles
-PREFERENCES_WBA;White Balance
 PREFERENCES_WORKFLOW;Layout
 PREFERENCES_ZOOMONSCROLL;Zoom images by scrolling
 PROFILEPANEL_COPYPPASTE;Parameters to copy
@@ -2092,11 +2094,11 @@ SHCSELECTOR_TOOLTIP;Click right mouse button to reset the position of those 3 sl
 SOFTPROOF_GAMUTCHECK_TOOLTIP;Highlight pixels with out-of-gamut colors with respect to:\n- the printer profile, if one is set and soft-proofing is enabled,\n- the output profile, if a printer profile is not set and soft-proofing is enabled,\n- the monitor profile, if soft-proofing is disabled.
 SOFTPROOF_TOOLTIP;Soft-proofing simulates the appearance of the image:\n- when printed, if a printer profile is set in Preferences > Color Management,\n- when viewed on a display that uses the current output profile, if a printer profile is not set.
 SORT_ASCENDING;Ascending
+SORT_BY_NAME;By Name
 SORT_BY_DATE;By Date
 SORT_BY_EXIF;By EXIF
-SORT_BY_LABEL;By Color Label
-SORT_BY_NAME;By Name
 SORT_BY_RANK;By Rank
+SORT_BY_LABEL;By Color Label
 SORT_DESCENDING;Descending
 TC_PRIM_BLUX;Bx
 TC_PRIM_BLUY;By
@@ -2281,8 +2283,8 @@ TP_COLORAPP_TCMODE_LABEL3;Curve chroma mode
 TP_COLORAPP_TCMODE_LIGHTNESS;Lightness
 TP_COLORAPP_TCMODE_SATUR;Saturation
 TP_COLORAPP_TEMP2_TOOLTIP;Either symmetrical mode temp = White balance.\nEither select illuminant always set Tint=1.\n\nA temp=2856\nD41 temp=4100\nD50 temp=5003\nD55 temp=5503\nD60 temp=6000\nD65 temp=6504\nD75 temp=7504
-TP_COLORAPP_TEMPOUT_TOOLTIP;Temperature and Tint.\nDepending on the choices made previously, the selected temperature is:\nWhite balance\nA temp=2856\nD41 temp=4100\nD50 temp=5003\nD55 temp=5503\nD60 temp=6000\nD65 temp=6504\nD75 temp=7504\nFree.
 TP_COLORAPP_TEMP_TOOLTIP;To select an illuminant, always set Tint=1.\n\nA temp=2856\nD41 temp=4100\nD50 temp=5003\nD55 temp=5503\nD60 temp=6000\nD65 temp=6504\nD75 temp=7504
+TP_COLORAPP_TEMPOUT_TOOLTIP;Temperature and Tint.\nDepending on the choices made previously, the selected temperature is:\nWhite balance\nA temp=2856\nD41 temp=4100\nD50 temp=5003\nD55 temp=5503\nD60 temp=6000\nD65 temp=6504\nD75 temp=7504\nFree.
 TP_COLORAPP_TONECIE;Use CIECAM for tone mapping
 TP_COLORAPP_TONECIE_TOOLTIP;If this option is disabled, tone mapping is done in L*a*b* space.\nIf this option is enabled, tone mapping is done using CIECAM02.\nThe Tone Mapping tool must be enabled for this setting to take effect.
 TP_COLORAPP_VIEWINGF_TOOLTIP;Takes into account the support on which the final image will be viewed (monitor, TV, projector, printer, etc.), as well as its environment. This process will take the data coming from process 'Image Adjustments' and 'bring' it to the support in such a way that the viewing conditions and its environment are taken into account.
@@ -2757,8 +2759,6 @@ TP_LOCALLAB_CBDL_TOOLNAME;Contrast by Detail Levels
 TP_LOCALLAB_CENTER_X;Center X
 TP_LOCALLAB_CENTER_Y;Center Y
 TP_LOCALLAB_CH;CL - LC
-TP_LOCALLAB_CHRO46LABEL;Chroma levels 456: Mean=%1 High=%2
-TP_LOCALLAB_CHROLABEL;Chroma levels 0123: Mean=%1 High=%2
 TP_LOCALLAB_CHROMA;Chrominance
 TP_LOCALLAB_CHROMABLU;Chroma levels
 TP_LOCALLAB_CHROMABLU_TOOLTIP;Increases or reduces the effect depending on the luma settings.\nValues under 1 reduce the effect. Values greater than 1 increase the effect.
@@ -2932,11 +2932,11 @@ TP_LOCALLAB_GAMM;Gamma
 TP_LOCALLAB_GAMMASKCOL;Gamma
 TP_LOCALLAB_GAMMASK_TOOLTIP;Adjusting Gamma and Slope can provide a soft and artifact-free transformation of the mask by progressively modifying 'L' to avoid any discontinuities.
 TP_LOCALLAB_GAMSH;Gamma
-TP_LOCALLAB_GAMUTLABRELA;Lab
-TP_LOCALLAB_GAMUTMUNSELL;Munsell only
 TP_LOCALLAB_GAMUTNON;None
+TP_LOCALLAB_GAMUTLABRELA;Lab
 TP_LOCALLAB_GAMUTXYZABSO;XYZ Absolute
 TP_LOCALLAB_GAMUTXYZRELA;XYZ Relative
+TP_LOCALLAB_GAMUTMUNSELL;Munsell only
 TP_LOCALLAB_GAMW;Gamma (wavelet pyramids)
 TP_LOCALLAB_GRADANG;Gradient angle
 TP_LOCALLAB_GRADANG_TOOLTIP;Rotation angle in degrees: -180 0 +180.
@@ -3025,8 +3025,6 @@ TP_LOCALLAB_LAPRAD1_TOOLTIP;Increases the contrast of the mask by increasing the
 TP_LOCALLAB_LAPRAD2_TOOLTIP;Smooth radius uses a guided filter to decrease artifacts and smooth out the transition.
 TP_LOCALLAB_LAPRAD_TOOLTIP;Smooth radius uses a guided filter to decrease artifacts and smooth out the transition.
 TP_LOCALLAB_LAP_MASK_TOOLTIP;Solves PDEs for all Laplacian masks.\nIf enabled the Laplacian threshold mask reduces artifacts and smooths the result.\nIf disabled the response is linear.
-TP_LOCALLAB_LCLABELS;Residual noise levels
-TP_LOCALLAB_LCLABELS_TOOLTIP;Displays the mean and high-end noise values for the area shown in the Preview Panel (at 100% zoom). The noise values are grouped by wavelet levels 0,1,2,3 and 4,5,6.\nThe displayed values are indicative only and are designed to assist with denoise adjustments. They should not be interpreted as absolute noise levels.\n\n 300: Very noisy\n 100-300: Noisy\n 50-100: Moderatly noisy\n < 50: Low noise\n\nThey allow you to see:\n*The impact of Noise Reduction in the main-menu Detail tab.\n*The influence of Non-local Means, Wavelets and DCT on the luminance noise.\n*The influence of Wavelets and DCT on the chroma noise.\n*The influence of Capture Sharpening and Demosaicing.
 TP_LOCALLAB_LC_FFTW_TOOLTIP;FFT improves quality and allows the use of large radii, but increases processing time (depends on the area to be processed). Preferable to use only for large radii. The size of the area can be reduced by a few pixels to optimize the FFTW. This can reduce the processing time by a factor of 1.5 to 10.
 TP_LOCALLAB_LC_TOOLNAME;Local Contrast & Wavelets
 TP_LOCALLAB_LEVELBLUR;Maximum blur levels
@@ -3087,13 +3085,11 @@ TP_LOCALLAB_LOGSURSOUR_TOOLTIP;Changes tones and colors to take into account the
 TP_LOCALLAB_LOGVIEWING_TOOLTIP;Corresponds to the medium on which the final image will be viewed (monitor, TV, projector, printer, etc.), as well as the surrounding conditions.
 TP_LOCALLAB_LOG_TOOLNAME;Log Encoding
 TP_LOCALLAB_LUM;LL - CC
-TP_LOCALLAB_LUM46LABEL;Luma levels 456: Mean=%1 High=%2
 TP_LOCALLAB_LUMADARKEST;Darkest
 TP_LOCALLAB_LUMASK;Background color/luma mask
 TP_LOCALLAB_LUMASK_TOOLTIP;Adjusts the shade of gray or color of the mask background in Show Mask (Mask and modifications).
 TP_LOCALLAB_LUMAWHITESEST;Lightest
 TP_LOCALLAB_LUMFRA;L*a*b* standard
-TP_LOCALLAB_LUMLABEL;Luma levels 0123: Mean=%1 High=%2 
 TP_LOCALLAB_MASFRAME;Mask and Merge
 TP_LOCALLAB_MASFRAME_TOOLTIP;For all masks.\nTakes into account the ΔE image to avoid modifying the selection area when the following Mask Tools are used: Gamma, Slope, Chroma, Contrast curve, Local contrast (by wavelet level), Blur Mask and Structure Mask (if enabled ).\nDisabled when Inverse mode is used.
 TP_LOCALLAB_MASK;Curves
@@ -3174,6 +3170,7 @@ TP_LOCALLAB_MERNIN;Screen
 TP_LOCALLAB_MERONE;Normal
 TP_LOCALLAB_MERSAT;Saturation
 TP_LOCALLAB_MERSEV;Soft Light (legacy)
+TP_LOCALLAB_MERSEV0;Soft Light Illusion
 TP_LOCALLAB_MERSEV1;Soft Light W3C
 TP_LOCALLAB_MERSEV2;Hard Light
 TP_LOCALLAB_MERSIX;Divide
@@ -3183,6 +3180,12 @@ TP_LOCALLAB_MERTHR;Difference
 TP_LOCALLAB_MERTWE;Exclusion
 TP_LOCALLAB_MERTWO;Subtract
 TP_LOCALLAB_METHOD_TOOLTIP;'Enhanced + chroma denoise' significantly increases processing times.\nBut reduce artifacts.
+TP_LOCALLAB_LCLABELS;Residual noise levels
+TP_LOCALLAB_LCLABELS_TOOLTIP;Displays the mean and high-end noise values for the area shown in the Preview Panel (at 100% zoom). The noise values are grouped by wavelet levels 0,1,2,3 and 4,5,6.\nThe displayed values are indicative only and are designed to assist with denoise adjustments. They should not be interpreted as absolute noise levels.\n\n 300: Very noisy\n 100-300: Noisy\n 50-100: Moderatly noisy\n < 50: Low noise\n\nThey allow you to see:\n*The impact of Noise Reduction in the main-menu Detail tab.\n*The influence of Non-local Means, Wavelets and DCT on the luminance noise.\n*The influence of Wavelets and DCT on the chroma noise.\n*The influence of Capture Sharpening and Demosaicing.
+TP_LOCALLAB_LUMLABEL;Luma levels 0123: Mean=%1 High=%2 
+TP_LOCALLAB_LUM46LABEL;Luma levels 456: Mean=%1 High=%2
+TP_LOCALLAB_CHROLABEL;Chroma levels 0123: Mean=%1 High=%2
+TP_LOCALLAB_CHRO46LABEL;Chroma levels 456: Mean=%1 High=%2
 TP_LOCALLAB_MLABEL;Restored data Min=%1 Max=%2
 TP_LOCALLAB_MLABEL_TOOLTIP;The values should be close to Min=0 Max=32768 (log mode) but other values are possible.You can adjust 'Clip restored data (gain)' and 'Offset' to normalize.\nRecovers image data without blending.
 TP_LOCALLAB_MODE_EXPERT;Advanced
@@ -3790,12 +3793,12 @@ TP_TM_FATTAL_AMOUNT;Amount
 TP_TM_FATTAL_ANCHOR;Anchor
 TP_TM_FATTAL_LABEL;Dynamic Range Compression
 TP_TM_FATTAL_THRESHOLD;Detail
-TP_TONE_EQUALIZER_BANDS;Bands
 TP_TONE_EQUALIZER_BAND_0;Blacks
 TP_TONE_EQUALIZER_BAND_1;Shadows
 TP_TONE_EQUALIZER_BAND_2;Midtones
 TP_TONE_EQUALIZER_BAND_3;Highlights
 TP_TONE_EQUALIZER_BAND_4;Whites
+TP_TONE_EQUALIZER_BANDS;Bands
 TP_TONE_EQUALIZER_DETAIL;Regularization
 TP_TONE_EQUALIZER_LABEL;Tone Equalizer
 TP_TONE_EQUALIZER_PIVOT;Pivot (Ev)