* Init levels trc GUI
* Levels TRC
* Complete with gamma based attenuation
* Limit RGB channel Slope with checkbox
* Improve GUI and code channel TRC
* Change default values - compexity levels RGB channels
* Relative gamma mode RGB channel TRC
* Change label and ponderation rolloff
* Change rolloff level
* Threshold attenuation
* Threshold attenuation 2 part
* GUI Link R G B
* Linked RGB with Green slope - RGB channels
* Set Freeman TM functions with ImProcFunctions
* First GUI Abstract profile highlight attenuation
* GUI AP part 2
* Restore olg GUI AP
* Expander AP primaries adn illuminant
* Disable RGB channel TRC
* Expander contrast AP
* Slider attenuation response
* Save work GUI local contrast
* Save GUI part 2 AP curve
* Local contrast GUI Abstract Profile
* Move Abstract profile in toolpanel and ICMpanel
* rtengine variable contrast
* Variable contrast 2
* Variable contrast engine 3
* Variable contrast engine 4
* Variable contrast engine
* Detail levels pyramid
* Engine residual contrast
* Residual contrast
* Change settings detail levels
* Expander refinement - new tooltips - low resid contrast
* Change contrast profile and labels
* Remove warning message GUI Gtk
* Gamutcontrol code - disabled
* Improve with calceffect
* Other improvement variable contrast
* Offset variable contrast
* Range offset - comment code
* Parametric inva fot lut
* Clean cmakelist.txt
* Change contrast profiles
* Comment code ipwavelet
* Added orthogonal Daubechies scaling D20
* Change strenght curve - tooltip Daubechies
* Forgotten changes
* Comment code
* Move variable in process - take into account highlight attenuation
* Display label maximum preview and preset selection
* Remove console message
* harmonize levels wavelets iplocallab
* Tooltips contrast enhancement
* Change tooltip Contrast profile
* Chnage tooltip Contrast
* Message warning preview size
* Change gamma TRC values in GUI
* Remove itanium architecture support for windows as PR 7105
* Change windows.yml and appimage.yml
* Windows.yml apseimprov
* Clean and comment ipwavelet
* Clean comment icmpanel.cc
* Harmonize local contrast wavelet Selective editing with Abstract profile
* Harmonize with AP - offset
* vanishing moment D20 - Selective editing wavelet
* Offset only in advanced mode
* GUI expander contrast enable and pyrwavtrc
* Clean and comment code
* merge with dev
* Prepare sigmoid based
* Contrast sigmoid GUI
* Skew sigmoid GUI
* Sigmoid tone mapper in iplocallab
* Change GUI settings
* White-point and black-point auto
* Change EvDCP to ALLNORAW as others events DCP
* Change default skew
* Change settings - enable scale Yb
* Display white point - advanced mode
* Improve GUI
* Clean unused variable
* new sigmoid Q in cam16
* Change tooltips and default sigmoid Q settings
* Sigmoid Jz
* Clean code Jz and sigmoid
* Harmonize Sigmoid Q and Sigmoid RGB
* Harmonize Sigmoid Jz
* Clean code
* Improve labels wit cd/m2
* Slope base Q methode first
* GUI slope based Q
* Change default settings and tooltips
* Change tooltips
* Clean code - change default setting
* Change default local contrast & wavelet to wavelet & basic mode
* Fixed bad assignation slopesmoq
* Improve sigmoid and slope based Q - GUI for Log encoding Color appearance
* Remove wrong change
* various small improvments
* Allows black and white AP and SDA in basic mode
* Change the writing of wGamma and wSlope - attenuates the effect of the first 2 AP contrast profiles
* Clean code wgamma wslope
* Set curve Cam16 in basic mode
* Change position curve in GUI cam16
* Enable tonecurve1 in colorappearance & lighting in standard mode
* Fixed bug scale yb scene - ciecam curve - change default contrast enhancement
* not reset curve shape ciecam in strandard
* Change label Tone mapping operators and tooltips
* Change some labels and tooltips - Appearance - Mask and Mofifications - Recovery Based On Luminance Mask
* Forgotten changes
* Clean locallabtools2.cc
* Maxlevel wavelet minimum to 5
* Reset mask and modifications in SE wavelet and all tools in Global
* Show modified areas SE wavelet
* Tooltip show wavelets decomposition
* Fixed another bad behavior in Global - changes also in color & light for merge file
* Change behavior fullimage - global as in PR GHS
* Disable all mask and modifications in Global but remain active in fullimage and normal
* Set expander expanded = true
* Chane contrast enhancement coef
* Replace VBox trcWavVBox by ToolParamBlock trcWavFBox
* Forgotten code in icmpanel read pedited opacityShapeWLI - hope solve batch mode
* Change RGB Slope behavior with link
* No access to last level contrast enhancement
* Move Abstract Profile tooltip to title
The tooltip was popping up when the cursor was over almost any part of
the tool which was inconvenient. Now, the tooltip only appears when
hovering over the title.
* Improve Color Management expanders behavior
By default, collapse Abstract Profile and leave it's sub-expanders
expanded.
Keep the expanded state of all the sub-expanders during the editing
session.
Fix the right-click behavior. The clicked expander should be expanded
and all siblings, if any, should be collapsed.
* Fix RGB slope tone mapping RGB linkage
Synchronize the red, green, and blue values before updating the preview
to avoid using incorrect values to generate the preview.
* Fix SE CAM tone mapping slider defocus
Avoid unnecessarily hiding then showing the adjusters in tone mapping so
that focus is not lost while adjusting the adjusters.
* Delete history kslopesmo - remove IcmOpacityCurveWL
* change the tooltips as suggested by Lawrence
* Review L37 - change strengthjz strengthlc - MIDDLE_GREY MIDDLE_GREYjz - artifacts ciecam
* Change name Tone map freeman functions
* Remove gamutcont - rename localcont - change allocation memory wdspot
* Clean procparams
* remove sigmoidsenscie - logcieq
* Added * to three labels 'sigmoid' - change tooltip which shows the incompatibility with 5.11
* Forgotten correction suggested by Lawrence
* Compatibility 5.11 log encoding - sigmoid part 1
* Compatibility 5.11 part 2
* Compatibility 5.11 - step 3
* Compatibility 5.11 - step 4
* Compatibility 5.11 step xx
* Compatibility 5.11 - combobox operators Q and J
* Compatibility 5.11 Cam16 GUI first part
* Improve GUI Cam16 sigmoid compatibility
* Compatibility 5.11 Jz - sigmoid - step 1
* Compatibility 5.11 Jz gui step 2
* Compatibility 5.11 Jz GUI step x
* Compatibility 5.11 Jz - history - etc.
* Various change labels - history ...
* Improve GUI - hide show 5.11 5.12
* Jz 5.11 in iplocallab - step 1
* Compatibility 5.11 iplocallab cam16 step 1
* Improve GUI hide show 511 512
* Solved - I hope - GUI problem with tone mapper Q and J 5.11 and 5.12
* Compatibility 5.11 iplocallab Cam16 step 2
* Improve GUI compatibility 5.11 labels tooltips
* Small improvments GUI - labels - history...
* Fixed typo in paramsedited.cc clcurve issue 7283
* Change tooltips method 5.12 - 5.11 for cam16 and Jz brightness Q or J
* Clean and refine code
* Various change dafult language and CAM16 CAM02 replace by Cam16 Cam02
* Change modeQJ method for 5.11 in function ppversion
* Change labels as suggested by Wayne PR 7111
* Others changes suggested for label
* Change tooltips as suggested in PR
* Use unique pointer instead of manual management
* Update rtdata/languages/default
Co-authored-by: Lawrence37 <45837045+Lawrence37@users.noreply.github.com>
* Change all Cam16 references to CAM16
* Change convention uppercase and lowercase in frame - checkbox
* Improve tooltips for Tone Mapping Operators
* Another change CIECAM and uppercase lowercase in checkbox
* Remove appimage and windows yml
---------
Co-authored-by: Lawrence Lee <45837045+Lawrence37@users.noreply.github.com>
* Use target_include_directories to specify include paths
* Specify project root (parent of rtgui and rtengine) as include path
* Replace relative includes with normal includes
* changes such as symmetric works and temperature output makes sense
* Comment code
* other Comment code and small change
* Change tint in tooltip temperature
* Improve GUI for tempout and greenout
Note: This commit has only been tested on MacOS
Changes:
- Icons now use the native hidpi support from Gtk (through Icon Theme)
- Icons are now directly generated from scalable file (i.e. SVG file)
- Widget sizes are scaled based on DPI and scale factor
- Font size is scaled based on DPI and scale factor
Replaces the following deprecated Gtk classes throughout the codebase by their non-deprecated counterparts. Style, HBox, VBox, HPaned, VPaned, HScrollbar, VScrollbar, VSeparator, HSeparator, Stock, Table, VScale and HScale.
