liz/flipperzero-firmware
liz/flipperzero-firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
065241fe5b
flipperzero-firmware/firmware/targets/f7/target.mk

167 lines
6.4 KiB
Makefile
Raw Normal View History

[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
TOOLCHAIN = arm
BOOT_ADDRESS = 0x08000000
FW_ADDRESS = 0x08008000
OS_OFFSET = 0x00008000
FLASH_ADDRESS = 0x08008000
NO_BOOTLOADER ?= 0
ifeq ($(NO_BOOTLOADER), 1)
BOOT_ADDRESS = 0x08000000
FW_ADDRESS = 0x08000000
OS_OFFSET = 0x00000000
FLASH_ADDRESS = 0x08000000
CFLAGS += -DNO_BOOTLOADER
endif
OPENOCD_OPTS = -f interface/stlink.cfg -c "transport select hla_swd" -f ../debug/stm32wbx.cfg -c "stm32wbx.cpu configure -rtos auto" -c "init"
BOOT_CFLAGS = -DBOOT_ADDRESS=$(BOOT_ADDRESS) -DFW_ADDRESS=$(FW_ADDRESS) -DOS_OFFSET=$(OS_OFFSET)
MCU_FLAGS = -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard
CFLAGS += $(MCU_FLAGS) $(BOOT_CFLAGS) -DSTM32WB55xx -Wall -fdata-sections -ffunction-sections
Bootloader size optimizations (#873)
2021-12-07 14:17:08 +00:00
LDFLAGS += $(MCU_FLAGS) -specs=nosys.specs -specs=nano.specs -u _printf_float
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
Bootloader size optimizations (#873)
2021-12-07 14:17:08 +00:00
CPPFLAGS += -fno-rtti -fno-use-cxa-atexit -fno-exceptions
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
LDFLAGS += -Wl,--start-group -lstdc++ -lsupc++ -Wl,--end-group
[FL-1961] Cli: device_info format versioning. Detach target from firmware name. #765
2021-10-16 11:25:32 +00:00
HARDWARE_TARGET = 7
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
MXPROJECT_DIR = $(TARGET_DIR)
# Entry Point
ASM_SOURCES += $(MXPROJECT_DIR)/startup_stm32wb55xx_cm4.s
# STM32WB HAL
CUBE_DIR = ../lib/STM32CubeWB
CFLAGS += \
-DUSE_FULL_LL_DRIVER \
-DUSE_HAL_DRIVER \
-DHAVE_FREERTOS
CFLAGS += \
-I$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Inc \
-I$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Inc/Legacy \
[FL-1857] New USB stack (#735) * libusb_stm32 USB stack test * USB: Add dual CDC mode * USB HID demo, added libusb_stm32 as submodule * Target F6/F7: remomve unused ll_usb Co-authored-by: n.minaylov <n.minaylov@flipperdevices.com> Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-06 09:24:09 +00:00
-I$(CUBE_DIR)/Drivers/CMSIS/Device/ST \
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
-I$(CUBE_DIR)/Drivers/CMSIS/Device/ST/STM32WBxx/Include \
-I$(CUBE_DIR)/Drivers/CMSIS/Include
C_SOURCES += \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_comp.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cortex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_cryp.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_exti.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_gpio.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_hsem.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_ipcc.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pcd_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_pwr_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rcc.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_rtc_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_hal_tim_ex.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_adc.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_dma.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_gpio.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_i2c.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lptim.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rcc.c \
[FL-1818] System setting and debug options. RTC HAL refactoring. (#902) * FuriHal: RTC API refactoring. System Setting application. FuriCore: adjustable log levels. Minor code cleanup. * Storage: change logging levels for internal storage. * FuriCore: fix broken trace logging level
2021-12-14 22:39:59 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rtc.c \
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_spi.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_tim.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_usart.c \
[FL-1885] USB-UART bridge (#778) * [FL-1885] USB-UART: app and worker * [FL-1885] USB-UART: UART on CDC0 Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-21 18:12:20 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_lpuart.c \
[FL-2159] BadUSB alt codes (#935) * badusb: alt code commands * badusb: demo script update * usb hid: consumer control descriptor * BadUsb: remove dangerous type casting, rename variable to match codding style guide Co-authored-by: あく <alleteam@gmail.com>
2022-01-02 17:34:39 +00:00
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_utils.c \
$(CUBE_DIR)/Drivers/STM32WBxx_HAL_Driver/Src/stm32wbxx_ll_rng.c
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
# FreeRTOS
CFLAGS += \
[FL-1910, FL-2146] Update to new FreeRTOS, fix CMSIS thread flags collision with stream buffer. New cube. (#917) * Libs: add FreeRTOS submodule. FuriHal: replace ST provided FreeRTOS with original one. FuriHal: for cmsis os hal and patch it for better compatibility with stream buffer. * Makefile: fix svd plugin on blackmagic * Lib: update STM32CubeWB package. Project: update project to match new cube package. * Lib: properly rebase and upload STM32CubeWB * BleGlue: switch ack logging level to trace
2021-12-21 12:16:25 +00:00
-I$(LIB_DIR)/FreeRTOS-Kernel/include \
-I$(LIB_DIR)/FreeRTOS-Kernel/portable/GCC/ARM_CM4F \
-I$(LIB_DIR)/FreeRTOS-glue/
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
C_SOURCES += \
[FL-1910, FL-2146] Update to new FreeRTOS, fix CMSIS thread flags collision with stream buffer. New cube. (#917) * Libs: add FreeRTOS submodule. FuriHal: replace ST provided FreeRTOS with original one. FuriHal: for cmsis os hal and patch it for better compatibility with stream buffer. * Makefile: fix svd plugin on blackmagic * Lib: update STM32CubeWB package. Project: update project to match new cube package. * Lib: properly rebase and upload STM32CubeWB * BleGlue: switch ack logging level to trace
2021-12-21 12:16:25 +00:00
$(LIB_DIR)/FreeRTOS-Kernel/event_groups.c \
$(LIB_DIR)/FreeRTOS-Kernel/list.c \
$(LIB_DIR)/FreeRTOS-Kernel/queue.c \
$(LIB_DIR)/FreeRTOS-Kernel/stream_buffer.c \
$(LIB_DIR)/FreeRTOS-Kernel/tasks.c \
$(LIB_DIR)/FreeRTOS-Kernel/timers.c \
$(LIB_DIR)/FreeRTOS-Kernel/portable/GCC/ARM_CM4F/port.c \
$(LIB_DIR)/FreeRTOS-glue/cmsis_os2.c \
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
# BLE glue
CFLAGS += \
-I$(TARGET_DIR)/ble-glue \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/template \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/utilities \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl \
-I$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/shci
C_SOURCES += \
$(wildcard $(TARGET_DIR)/ble-glue/*.c) \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/utilities/otp.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/utilities/stm_list.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/utilities/dbg_trace.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/svc/Src/svc_ctl.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/template/osal.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/auto/ble_hci_le.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/auto/ble_gap_aci.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/auto/ble_gatt_aci.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/ble/core/auto/ble_hal_aci.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/tl_mbox.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/hci_tl.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/hci_tl_if.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/shci_tl.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/tl/shci_tl_if.c \
$(CUBE_DIR)/Middlewares/ST/STM32_WPAN/interface/patterns/ble_thread/shci/shci.c
[FL-1857] New USB stack (#735) * libusb_stm32 USB stack test * USB: Add dual CDC mode * USB HID demo, added libusb_stm32 as submodule * Target F6/F7: remomve unused ll_usb Co-authored-by: n.minaylov <n.minaylov@flipperdevices.com> Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-06 09:24:09 +00:00
# USB stack
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
CFLAGS += \
[FL-1857] New USB stack (#735) * libusb_stm32 USB stack test * USB: Add dual CDC mode * USB HID demo, added libusb_stm32 as submodule * Target F6/F7: remomve unused ll_usb Co-authored-by: n.minaylov <n.minaylov@flipperdevices.com> Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-06 09:24:09 +00:00
-DSTM32WB \
-DUSB_PMASIZE=0x400
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
# Furi HAL
FURI_HAL_OS_DEBUG ?= 0
ifeq ($(FURI_HAL_OS_DEBUG), 1)
CFLAGS += -DFURI_HAL_OS_DEBUG
endif
RPC: Add Virtual Display & Unify log tags (#814) * RPC: Update protobuf sources * RPC: Add Virtual Display * Unify log tags * RPC: Virtual Display placeholder * Rpc: clear frame buffer callback before confirm. * Firmware: full assert for hal, move fatfs initialization to furi hal. * FuriHal: VCP optimizations, thread safe console. Rpc: adjust buffer sizes. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-11-12 13:04:35 +00:00
FURI_HAL_USB_VCP_DEBUG ?= 0
ifeq ($(FURI_HAL_USB_VCP_DEBUG), 1)
CFLAGS += -DFURI_HAL_USB_VCP_DEBUG
endif
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
FURI_HAL_SUBGHZ_TX_GPIO ?= 0
ifneq ($(FURI_HAL_SUBGHZ_TX_GPIO), 0)
CFLAGS += -DFURI_HAL_SUBGHZ_TX_GPIO=$(FURI_HAL_SUBGHZ_TX_GPIO)
endif
ifeq ($(INVERT_RFID_IN), 1)
CFLAGS += -DINVERT_RFID_IN
endif
FURI_HAL_DIR = $(TARGET_DIR)/furi-hal
CFLAGS += -I$(FURI_HAL_DIR)
C_SOURCES += $(wildcard $(FURI_HAL_DIR)/*.c)
# Other
CFLAGS += \
-I$(MXPROJECT_DIR)/Inc \
RPC: Add Virtual Display & Unify log tags (#814) * RPC: Update protobuf sources * RPC: Add Virtual Display * Unify log tags * RPC: Virtual Display placeholder * Rpc: clear frame buffer callback before confirm. * Firmware: full assert for hal, move fatfs initialization to furi hal. * FuriHal: VCP optimizations, thread safe console. Rpc: adjust buffer sizes. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-11-12 13:04:35 +00:00
-I$(MXPROJECT_DIR)/fatfs
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
C_SOURCES += \
$(wildcard $(MXPROJECT_DIR)/Src/*.c) \
RPC: Add Virtual Display & Unify log tags (#814) * RPC: Update protobuf sources * RPC: Add Virtual Display * Unify log tags * RPC: Virtual Display placeholder * Rpc: clear frame buffer callback before confirm. * Firmware: full assert for hal, move fatfs initialization to furi hal. * FuriHal: VCP optimizations, thread safe console. Rpc: adjust buffer sizes. Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-11-12 13:04:35 +00:00
$(wildcard $(MXPROJECT_DIR)/fatfs/*.c)
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
# Linker options
ifeq ($(NO_BOOTLOADER), 1)
[FL-1990] Correct release type in copro manifest and rename boot to bootloader (#787) * World: rename boot to bootloader. * Scripts: correct release type in copro bundler.
2021-10-26 12:24:14 +00:00
LDFLAGS += -T$(MXPROJECT_DIR)/stm32wb55xx_flash_cm4_no_bootloader.ld
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
else
[FL-1990] Correct release type in copro manifest and rename boot to bootloader (#787) * World: rename boot to bootloader. * Scripts: correct release type in copro bundler.
2021-10-26 12:24:14 +00:00
LDFLAGS += -T$(MXPROJECT_DIR)/stm32wb55xx_flash_cm4_with_bootloader.ld
[FL-1587] RFID: Clock for emulation timer from antenna (#622) * RFID: pull antenna down when emulating * Rfid: fixed HID emulation by adding zero pulse every 4 bits * Rfid: HID emulation fixed with DSP based FSK oscillator. * Rfid: receive 125KHz clock for emulation timer from antenna and comparator * Rfid: commented unused variable * Firmware: rollback changes in f6. * Add F7 target based on F6. * F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values. * FuriHal: RFID init routine. * Scripts: update OTP tool for v11 board Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-10 02:19:02 +00:00
endif
SVD_FILE = ../debug/STM32WB55_CM4.svd
Reference in New Issue Copy Permalink