Commit Graph

60 Commits

Author SHA1 Message Date
aanper
14d1325b17 rename ioc 2020-12-26 12:09:23 +06:00
あく
9a257b048e
Power: more info (#274) 2020-12-23 00:16:32 +06:00
DrZlo13
8b6e7fd4ae
FL-443 Move sd card to second spi (#271)
* sd card spi 2 fix, add spi mgr
2020-12-19 13:52:17 +06:00
あく
73ecc7cde6
Rename Irukagotchi to Dolphin. Add basic game state structures. (#268)
* Rename Irukagotchi to Dolphin. Add basic game state structures.
* Dolphin: state, counters, api. BT: shared access to flash. Flash: write api.
* add fake -1 deeds, example of changing icounter

Co-authored-by: coreglitch <mail@s3f.ru>
2020-12-19 02:15:29 +06:00
DrZlo13
3ba1738acd
FL-262 Interrupt manager (#270)
* interrupt manager
* init interrupt manager
* add usage to lf-rfid app
* check ready flag
* move interrupts code to target hal
* fix path
2020-12-19 01:26:03 +06:00
あく
153d32bf15
Power: info (#272) 2020-12-19 00:03:28 +06:00
coreglitch
c1c069e95f
F2 F3 deprecate (#267)
* move f3-1 to f4, remove f3
* remove f2
* remove firmware F3 for pipeline
* remove patch for F4 makefile
* fix fw makefile
* migrate bootloader to f4
2020-12-14 19:36:07 +03:00
coreglitch
ff7ce6f00f
swap PB3/PA5 for SWO exposing (#263) 2020-12-11 18:12:37 +03:00
あく
46537f4470
FL-501 CSS for both clock domains (#264)
* CSS for both clock domains. Stale LSE detection and RTC domain reset on start.
* migrate to f4

Co-authored-by: aanper <mail@s3f.ru>
2020-12-11 15:34:17 +03:00
aanper
df27d775bf increase max app count 2020-12-10 17:58:33 +03:00
あく
2f2f6b5f50
BLE: F3 integration (#260)
* BLE: working version
* BLE: cleanup
* BLE: update device description and DIS.
* BLE: explicitly take semaphore and configure CLK48, bt subsystem status, remove LPM.
* HAL: add missing api_hal_bt_is_alive symbol
* TODO about valuemutex
* duplicate f3-1 (f4) ioc from f3
* regenerate project
* use target dir for ble glue path
* update f4 from f3

Co-authored-by: coreglitch <mail@s3f.ru>
2020-12-10 17:25:20 +03:00
aanper
162418f7e3 add ld file 2020-12-08 13:18:35 +03:00
coreglitch
61cce74291
Fix OK button in F4 (#259)
* fix OK button in F4
* return DFU serial to make
2020-12-08 12:51:59 +03:00
あく
228055e4eb
OpenOCD makefile integration and Charger IC initialization fixes. (#258)
* Makefile: start openocd from gdb, boot no boot version.
* bq25896: reset before readout. Cleanup.
2020-12-04 20:30:50 +03:00
coreglitch
884dba647a
FL-409 Boot0 OK button (#257)
* update makefiles for f3-1
* add f3-1 files
* fix mk for f3
* remap OK button
* differ gpio invert
* expose full duplex spi2
* remove duplicate bq drivers
* remove bq inc
2020-12-02 16:40:06 +03:00
あく
3a6fbff8c3
FL-339: cli diagnostic interface for power subsystem. (#256)
* Core, API: add externs for c++
* Makefile: improve debug speed, flash with openocd, cleanup f2 config
* Power: add cli diagnostic.
* Local: fix api hal externs
* Local: fix externs in main and flipper_hal
* F2: power state dump stabs
* Bootloader flashing with openocd
* F3: move bq drivers to libs
* temporary do not build drivers on local
* temporary do not build drivers on f2

Co-authored-by: aanper <mail@s3f.ru>
2020-12-02 13:47:13 +03:00
coreglitch
f58b322bb5
FL-353 Cc1101 rx (#255)
* enable transparent mode
* rssi ok, transmit ok, fifo ok
* I see the signal
* successful async rx (registers from smartrf)
* refactor rfstudio register config
* rewrite config, found some issues
* handle G0 interrupts
* g0 irq enable after cc1101 init
* update cube
2020-12-01 21:47:46 +03:00
DrZlo13
1f761d7fbb
[FL-84] iButton app, dallas emulate + cyfral read, cyfral emulate (#253)
* maxim crc function
* one wire template device and ds1990 classes
* 3 fields for addr
* cyfral emulator lib
* add cyfral read mode, refract rendering and events
* add ADC1_IN14, add adc interrupt
* cyfral read mode
* rename and move api-hal includes folder
* build onewire libs only if we build app
* start in mode 0
2020-11-25 10:25:13 +03:00
あく
758e37e294
Enable RTC for all platforms and add cli date command (#252)
* F2: enable RTC. Cli: add date command.
2020-11-23 16:26:19 +03:00
あく
e348990fc6
Debug: Add PyCortexDebug. Core and peripheral register database and decoder. (#251)
* Debug: pycortexdebug
* Debug: format PyCortexMDebug source code
2020-11-19 18:48:34 +03:00
DrZlo13
a96f23af9b
fix multithread logic in template app, update gpio HAL (#250)
* fix multithread logic
* more buffer for dallas id string
* update apps to use new logic
* delay_us small speedup
* add consant qualifier to gpio records and some core api
* fix some apps to use simpler method of getting gpio record
* fix ibutton app, stupid stack problem
2020-11-19 15:25:32 +03:00
coreglitch
ccd40497eb
FL-176 LF RFID RX (#248)
* pulldown ibutton pin during rfid read
* enable and handle COMP interrupts
* send events from comparator IRQ and handle in app
* manchester encode
* successfully read em4100
* read-emulate
* led
2020-11-19 14:11:03 +03:00
DrZlo13
27ae2a8fa9
#FL-303 fix for some spi bugs, test app for sd-nfc interconnection (#247)
* sd-nfc test app

* do not hold spi in disable mode

* disable pullups in nfc chip
2020-11-18 16:01:25 +03:00
あく
d57b7fd448
Cli: fix memleak, add more commands. (#244)
* Cli: add statndard applications, fix memory leak, add reset and reset to dfu.

* Lib: pass proper data pointer to osMessageQueueGet

* App-loader: optional cli

* Format sources
2020-11-17 20:08:31 +03:00
DrZlo13
1abc98086e split resources, fix format 2020-11-17 07:39:48 +10:00
coreglitch
3d5563b169
init nfc later (#239) 2020-11-16 18:26:34 +03:00
あく
3749eb0eed
USB VCP Cli (#237)
* Core: ring buffer.
* Api: usb vcp. F3: vcp glue code.
* Applications: cli draft version.
* Cli: basic working version, includes help and version commands
* HAL: vcp on f2
* Makefile: update openocd conf
* F3: vcp rx with freertos stream
* Cli: help
* Cli: standard commands, api-hal-uid
* Power: cli poweroff.
2020-11-16 13:16:34 +03:00
DrZlo13
714d732745
FL-78 Microsd test application (#230)
* variable cluster size, label info functions for targets
* app record
* init, mount, get label, get sn, get space
* enable exfat
* more stack for the stack god
* remove c app and add cpp app
* remove MULTI_PARTITION
* fix 4gb bug
* update app to new template lib, add animated waiting
* tiny buffer configuration
* write speed benchmark
* fnv1a hash library
* make DEFAULT_STACK_SIZE and MAX_TASK_COUNT defined per target
* fully functional sd card app
* build sd test app to release firmware
* cpp, not c
* light up red led if error
* flags for c++
* linking with g++
* suppres snprintf warning
* move format work area to heap

Co-authored-by: coreglitch <mail@s3f.ru>
2020-11-14 19:24:38 +03:00
coreglitch
a61eef0f99
FL-186 Add vibro demo (#234)
* add vibro demo
* add F2 support
2020-11-12 22:26:49 +03:00
DrZlo13
9d8c36810e
IR RX simple app (#218)
* split falling and rising ir rx events
* fix irda
* simple irda rx function for app
* add extern timer
* fix timer num for f2
2020-11-11 10:36:27 +03:00
あく
f05ffddbde
Power: bq25896 and bq27220 drivers, portable power api. (#224)
* Power: add portability layer, port to F3.
* F3: bq25896 driver stab
* GUI: new primary and secondary fonts
* F3: bq25896 register map, basic functions
* F3: move bq27220 command descritpion to separate file. Code format.
* Power: OTG enable/disable
* Power: choose more correct profile
* F3: pet bq25896 watchdog sometimes
2020-11-11 09:31:35 +03:00
DrZlo13
49fdb28871
sd detect pin feature (#222)
* test sd detect pin
* sd detect support for f2 board
2020-11-11 09:17:53 +03:00
あく
76e3fd3060
Firmware, Bootloader: add f3 target. (#215)
* Firmware, Bootloader: add f3 target. Refactor code to be portable across targets.
* Firmware: remove bkpt
* Makefile: debug agent. Debug: f3 platform throw openocd.
* freertos-openocd helper
* separate hal resources
* return of input_dump app
* using hew target resources abstration layer for backlight and blink
* dirty hack for input driver, f3 has no charging pin
* worked input interrupts
* working display
* F3: switch to 32mHz resonator
* F3: configure SD_CS pin
* NFC: port to F3.
* fat uart app
* sd card hal api
* separate CC1101 spi config
* faster spi gpio for sd card
* Assets: disable LFS
* Cube: disable css on LSE
* Input: format code
* Make: add bootloader source code to formatting rule
* F3: enable rf by default, adjust clock settings, map all pins where they should be.
* libs for coreglitch_demo_0
* nvic priority
* bus clocks all to 64
* lf-rfid timer and pin
* irda
* ir rx setup
* tim2 irq handler
* Makefile: environment aware mkdir
* Makefile, Irukagotchi: commit seq number.
* split falling and rising ir rx events
* Makefile: proper git branch detect on old git. Firmware: api fix.
* fix irda
* Makefile,Irukagotchi: date timestamp.
* NFC: adjust SPI speed
* Irukagotchi: format code
* Make: add blackmagic debug in host mode
* Makefile: detach blackmagic from terminal signals
* Makefile,Irukagotchi: stamp target
* add F3 bootloader/firmware to CI

Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
Co-authored-by: aanper <mail@s3f.ru>
2020-11-06 13:52:50 +03:00
coreglitch
bce6f867f1
show target version, date, commit hash and branch (#221) 2020-11-06 12:31:06 +03:00
coreglitch
eb2679b982
Refactor F2/local before F3 merge (#220)
* add files from f3
* rollback lfs
* Move assets from LFS
* remove lfs from build

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2020-11-06 11:31:59 +03:00
DrZlo13
979af6c165
Core code cleanup (#206)
* add delay function
* todo about delay_isr
* remove arduino defines and fix all apps to use core-api/hal-api
* delay for local target
* remove warnings of task_equal
* fix BSP_SD_Init
* fix USBD_static
* grio read constant pointer to gpio
* add TODO about ISR context
* const void* arg for pubsub api
* mark unused functions
* app pointers now pointed to constant apps
* fix printf format
* fix "unused" warnings in local target
* fix const pin read in local target
* fix int to pointer warnings in local target
* power read mutex error fix
* delete old makefile
* add -werror

Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: aanper <mail@s3f.ru>
2020-10-29 10:58:19 +03:00
DrZlo13
8aeafd8179
furi_check - a new way to asserting (#204)
* hal-related task_is_isr_context function
* furi_check implementation
* change application to use furi_check
* add second level of assertion
* add TODO about ISR context
* Applications: refactor furi_check and furi_assert.
* Apploader: propwer widget usage. Menu: check on furi resource request.
* refactor furi_check

Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: coreglitch <mail@s3f.ru>
2020-10-29 09:27:17 +03:00
DrZlo13
c9b921f6ce
added openocd support (#211)
openocd needs a visible uxTopUsedPriority symbol for freertos, but freertos is discarding it in v7, so I add the helper file manually
2020-10-29 08:41:44 +03:00
あく
665f6d7d9c
Assets, Icons, UI toolkit. Part 1. (#202)
* Assets: import from gdrive
* Assets: fully working build pipeline and registry
* NFC: menu icon
* Gui: layers. Irukagotchi: base app to handle input on idle screen. Makefile: reboot after flash in dfu mode.
* ValueMutex: with lambda
* Assets: proper animation frames sorting
* ValueMutex: proper furi_open usage
* Assets,GUI: split icon into icon data and icon state.
* Format source code
* Docker: add python3 and imagemagic
* Irukagotchi: cleanup
* GUI: event lock moved to gui.
* Rfid: proper gui layer
* GUI: elements. Menu: frame and scroll
* GUI, Menu: format code.
* Menu: dual font main menu
* Menu: format sources
* GUI: 0 total scrollbar
* CI: enable lfs
* Menu: pixel perfect main menu

Co-authored-by: Aleksandr Kutuzov <aku@plooks.com>
Co-authored-by: aanper <mail@s3f.ru>
2020-10-26 20:00:17 +03:00
coreglitch
e699c4a31e
Lf rfid (#196)
* add lf rfid workaround
* add pwmn
* carrier generator
* proper exit for lf rfid

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2020-10-26 12:56:46 +03:00
Vadim Kaushan
bb68fca20b
Implement ValueManager and ValueComposer (#183)
* Fix ValueManager implementation
* Implement ValueComposer
* Add constructor for ValueManager
* Add value-expanders.h to flipper_v2.h set
* Move COPY_COMPOSE body into a .c file
* Add test for ValueManager
* Add destructors for ValueMutex, ValueManager and ValueComposer
* Use destructors in tests
* Move composition logic into perform_compose()
* Add docs for perform_compose()
* Add test for ValueComposer
* Replace atomic_bool with bool as g++ compiler doesn't support C11 atomics
* Add Event type
* Add semaphore support to the local target
* Add test for Event
* Update input records and relevant examples
* Rename Event to AppEvent in the cc1101-workaround example
* Rename Event to AppEvent in the irda example
* Use Event in ValueComposer to wait for update request
* Add perform_compose_internal() function
* fix Event/AppEvent

Co-authored-by: aanper <mail@s3f.ru>
2020-10-26 12:26:15 +03:00
DrZlo13
69d97afea8
IRDA samsung protocol (#200)
* samsung irda protocol implementation
* app for samsung irda protocol
* smaller strings and hal pwm

Co-authored-by: aanper <mail@s3f.ru>
2020-10-26 10:27:27 +03:00
coreglitch
f5b342abbe
Api hw gpio pwm (#199)
* initial gpio layer

* move temlplate.c to template.c.example in preparing to applications.mk rework

* separate arduino layer

* separate flipper_hal.x

* prepare to switch applications on v2 core gpio api

* swithch applications to v2 gpio api

* gpio api for local target

* better gpio_disable handling

* remove pwm functions from local target

* inline gpio funcs

* common function to init all api's

* fix local example blink

* move delay us to hal api folder

* move pwm_set/pwm_stop to hal api folder

* update applications to use hal pwm api

* remove gpio mode case warning

* add speaker demo to build

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2020-10-26 10:16:54 +03:00
DrZlo13
37fc47a24f
IR transmit example (#180)
* DWT-based microsecond delay

* simple ir app (work only with NEC protocol and predefined address - command)

* remove space from file name, add delay_us_init_DWT header

* float-based delay us

* init tim2 by CubeMX

* fix simple pwm functions

* simple pwm timer based ir nec protocol

* ir gui test app

Co-authored-by: aanper <mail@s3f.ru>
2020-10-23 12:39:11 +03:00
Aleksandr Kutuzov
4c60218997 NFC: proper include order in Makefile 2020-10-20 15:25:01 +03:00
Aleksandr Kutuzov
4c9eb4928d NFC: application + rfal + driver. 2020-10-20 14:12:28 +03:00
aanper
05d704fd54 merge 2020-10-17 16:48:13 +03:00
aanper
571f97e2b3 hotfix usb stack 2020-10-16 09:45:38 +03:00
DrZlo13
05ef19b07a
Pubsub core api feature (#174)
* fixed inline functions for modern C standart

* pubsub api, base version

* basic test for pubsub

* update applications.mk, add test file

* more test for pubsub

* remove unimplemented files, cleanup header file

* remove legacy tests, check unsubscribe not call cb

* implement deleting mutex, fail test

* release mutex before deleting

Co-authored-by: aanper <mail@s3f.ru>
2020-10-15 21:23:18 +03:00
DrZlo13
59740349fa
furi memory managment (#177)
* memory managment calls now forwarded to freertos heap

* memory managment tests

* local target test compability

* rename heap.c file to heap_4.c for local target and explicity init heap in single thread context

* rebase BlockLink_t struct

* check mutex in local heap

Co-authored-by: aanper <mail@s3f.ru>
2020-10-15 20:36:15 +03:00