Commit Graph

52 Commits

Author SHA1 Message Date
あく
616b7325c6
[FL-952] I2C: correctly handle STOP flags. Apps: increase cli_app stack size. (#408)
* I2C: correctly handle STOP flags. Apps: increase cli_app stack size.
* API HAL Power: simplify api_hal_power_dump_state. Format sources.
2021-04-12 21:09:38 +03:00
あく
5d08b35b54
[FL-1009, FL-1118] Better initialization sequence and V8 hardware support (#406)
* Interrupt manager: add memory barriers.
* ISRs: remove TIM17 dead code.
* API HAL Delay: rename initialization routine and move to API-HAL
* Main: move FURI initialization to the start.
* API HAL GPIO: drop CC1101 shenanigans, COMP inversion for new boards.
* IButton: migrate Cyfral and Metakom to RFID comp routine, make it compatible with new boards.
* RFID: Better keyboard handling and shutdown routines
2021-04-11 16:47:36 +03:00
あく
41c3b95f6d
Backport subghz to f4 targret (#395) 2021-04-01 13:03:55 +03:00
あく
6fb6e8bd3f
Consistent furi_assert usage across project. (#392) 2021-03-31 21:05:00 +03:00
あく
81ace53cc1
Api Hal OS/Power: split insomnia and return to where it belongs. (#393) 2021-03-31 20:55:00 +03:00
あく
5439e232cc
[FL-950] CC1101 Stage1, SPI Refactoring, Drivers layer (#386)
* API HAL SPI: refactoring, split into layers, prepare ST HAL separation. API HAL SubGhz: initialize on start. Drivers: add basic cc1101 driver. Update API usage. Debug: increase max debugger port speed. Remove subghz apps.
* CC1101: chip status handling. ApiHalSpi: increase SubGhz bus speed to 8mhz. F4: backport subghz initialization.
* Api Hal SubGhz: rx path and frequency. CC1101: frequency control.
* SubGhz Application: basic tests
* SubGhz app: tone and packet test. API HAL SUBGHZ: update configs, add missing bits and pieces.
2021-03-31 20:52:26 +03:00
gornekich
6375f21cf5
[FL-185] Gauge calibration (#391)
* api-hal-power: add design capacity parameter
* bq27220: fix control command and initialization
* bq27220: add cedv configuration
* power: add cedv configuration parameters
* bootloader: add only used drivers sources for build
* main: init DWT before api-hal

Co-authored-by: あく <alleteam@gmail.com>
2021-03-26 14:23:31 +03:00
its your bedtime
b85cc7f788
[FL-904] Power info UI (#382)
* New power screen UI
* API HAL Power: add VBUS voltage to API

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-03-19 22:37:52 +03:00
あく
4ae5bd3d75
[FL-944] Preliminary BLE fix: leave PC4 unconfigured. Cleanup code. (#381)
* GPIO: disable CC1101 GD0 pin configuration. API HAL OS: enable sleep. Cleanup interrupts and gpio code.

* API HAL: disable deep sleep, add light sleep, use it instead.
2021-03-19 17:23:53 +03:00
SG
1daef3d025
new iButton app (#328)
* rename old ibutton app to ibutton-test

* more renames

* updated onewire library compilation condition

* add submenu_clean subroutine

* add index for submenu callback

* c++ guard for gui modules

* add released ibutton app

* fix the position of the submenu window if there are too few items

* iButton app basis

* negative icon position info

* fix submenu_clean subroutine

* add ibutton app to applications makefile

* add onewire key read routine to read mode

* rename mode to scene

* rename files and folder (mode to scene)

* rename ibutton view to view manager

* rename get_view to get_view_manager

* cpp guards

* key read, store and notify features

* syntax fix

* make iButtonScene functions pure virtual

* fix syntax

* add text store, add new scene (crc error)

* not a key scene

* syntax fix

* read success scene

* app, switching to the previous scene with the number of scenes to be skipped

* scene whith menu when key is readed

* fix font height calculation, fix offsets

* add key write scene

* view_dispatcher_remove_view subroutine

* generic pause/resume os methods

* fix furi_assert usage

* key store, worker

* fix pointer comparsion

* saved keys, saved key action scenes

* key delete/confirm delete scenes and routines

* use last input subsystem changes

* fix syntax

* fix new model usage in submenu

* fix includes

* use vibro pin

* use stored key name if valid

* emulate scene

* random name generator

* name and save readed key scenes, new icon

* fix icon position

* fix text scene exit

* fix naming, fix text placement, new info scene

* state-driven cyfral decoder

* better cyfral decoder

* better cyfral decoder

* one wire: search command set

* metakom decoder

* more key types

* add next scene to error scenes

* universal key reader

* use new key reader

* syntax fix

* warning fix

* byte input module template

* new thread and insomnia api usage

* New element: slightly rounded frame

* Use elements_slightly_rounded_frame in text input

* Gui test app: byte input usage

* Byte input module: data drawing and selection

* Byte input: comment currently unused fns

* remove volatile qualifier

* base byte input realisation

* App gui test: remove internal fns visibility

* Byne input, final version

* test install gcc-arm-none-eabi-10-2020-q4-major

* test install gcc-arm-none-eabi-10-2020-q4-major

* App iButton: byte input view managment

* App iButton: add key manually scenes

* App iButton: rename scenes, add popup timeout

* App iButton: use new scenes, new fn for rollback to specific prevous scene.

* App iButton: remove byte input view on app exit

* App iButton: edit key scene

* Module byte input: reduce swintch value to uint8_t

* Module byte input: switch from switch-case to if, unfortunately we need compile-time constants to use with switch

* Icons: new small arrows

* Module byte input: new arrangement of elements

* OneWire slave lib: fix deattach sequence

* App iButton: pulse sequencer

* App iButton: add more keys to store

* App iButton: split key worker to separate read/write/emulate entitys

* App iButton: use new read/emulate entities

* fix callback pointer saving

* App iButton: use KeyReader error enum instead of KeyWorker error list handling

* App iButton: do not use insomnia fns in pulse sequencer

* App iButton: use KeyReader error enum in read scene

* OneWire slave lib: more READ ROM command variants, call callback only if positive result

* GPIO resources: add external gpio

* App SD/NFC: removed application

* App iButton-test: update to new light api

* App iButton: update to new light-api

* Outdated apps: add api-light-usage

* Gpio: update SD card CS pin settings

* API-power: added fns to disable/enable external 3v3 dc-dc

* API-gpio: separated SD card detect routines

* Resources: removed sd cs pin

* SD card: low level init now resets card power supply

* App SD-filesystem: use new card detect fns

* SD card: fix low level init headers

* SD card: more realilable low level init, power reset, exit from command read cycle conditionally

* App SD-filesystem: led notifiers, init cycling

* SD card: backport to F4

* Api PWM: add c++ guards

* App iButton: yellow blink in emulate scene, vibro on

* App iButton: one wire keys command set

* App iButton: successful write scene

* App iButton: key writer

* App iButton: syntax fix

* App iButton: notify write success

* App iButton: fix double scene change

* SD card: handle eject in init sequence

* SD card: api to set level on detect gpio

* SPI: api to set state on bus pins

* SD card: set low state on bus pins while power reset

* File select: init

* File select: fix input consuming

* SD Card: fixed dir open api error

* SD-card: replace strncpy by strlcpy. Fix buffer overflow error.

* API HAL OS: replace CMP based ticks with ARR based one, hard reset lptimer on reconfiguration.

* GUI: More stack size for (temporary, wee need to implement sd card api in separate thread)

* GUI: File select module.

* App iButton-test: remove obsolete app

Co-authored-by: rusdacent <rusdacentx0x08@gmail.com>
Co-authored-by: coreglitch <mail@s3f.ru>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-03-12 15:45:18 +03:00
its your bedtime
fc12f91a64
[FL-378] Update usb descriptor to display unique flipper name (#373)
* update usb descriptor to display unique flipper name

* added flip_ prefix for usb descriptor, updated manufacturer string

* include name in ApiHalVersionOTP struct, update assets.py

Co-authored-by: あく <alleteam@gmail.com>
2021-03-12 12:18:13 +03:00
gornekich
0af6c9882e
[FL-580] Prepare BLE for certification (#376)
* api-hal-bt: separate bt init to core init and app start

* bt: add continuous TX and RX tests

* bt: finish rx test on Back button click

* api-hal-bt: check core 2 started, same f4 and f5 implementation

* bt: refactoring, move hopping test logic to main thread

Co-authored-by: あく <alleteam@gmail.com>
2021-03-11 12:31:07 +03:00
あく
b920248693
API HAL OS: replace CMP based ticks with ARR based one, hard reset lptimer on reconfiguration. (#377) 2021-03-11 09:47:07 +03:00
あく
2f14f6dac5
API HAL I2C: add timeout support. Update I2C API usage by drivers. (#374)
* API HAL I2C: add timeout support. Update I2C API usage by drivers.
* F4: Add missing API HAL Vibro implementation.
2021-03-10 16:23:54 +03:00
SG
fef16a8e7a
SD card v7 BSP (#361)
* Outdated apps: add api-light-usage

* Gpio: update SD card CS pin settings

* API-power: added fns to disable/enable external 3v3 dc-dc

* API-gpio: separated SD card detect routines

* Resources: removed sd cs pin

* SD card: low level init now resets card power supply

* App SD-filesystem: use new card detect fns

* SD card: fix low level init headers

* SD card: more realilable low level init, power reset, exit from command read cycle conditionally

* App SD-filesystem: led notifiers, init cycling

* SD card: backport to F4

* SD card: handle eject in init sequence

* SD card: api to set level on detect gpio

* SPI: api to set state on bus pins

* SD card: set low state on bus pins while power reset

Co-authored-by: coreglitch <mail@s3f.ru>
2021-03-09 14:53:33 +03:00
あく
9df4d8e2ed
[FL-635] Enable LSE CSS (#371)
* LSE CSS: explicitly configure and start LSE + LSI1 and enable LSECSS at boot, enable LSECSS interrupt in firmware.
* F4: backport LSE CSS shenanigans.
* Split LSE/HSE CSS handling routines, add TODO for missing notification.
2021-03-08 18:55:51 +03:00
あく
f4f8ef59fd
[FL-933] API HAL I2C: initialize bus on start (#360)
* API HAL I2C: initialize bus on start
* API HAL I2C: move timing register to resources, explain its value. Update cube project.
2021-03-03 12:21:14 +03:00
gornekich
cfa76f19d0
[FL-905] Add battery health state monitoring in power app (#358)
* add battery health reading from gauge
* add battery health reading to api-hal-power
* update battery health in power application

Co-authored-by: あく <alleteam@gmail.com>
2021-03-02 19:07:26 +03:00
あく
38011e88f3
API HAL: takeover i2c initialization and abstraction. Update I2C drivers to match new api. Back port API HAL to bootloader and enable light support for F5. (#356)
Co-authored-by: coreglitch <mail@s3f.ru>
2021-03-02 14:45:47 +03:00
coreglitch
056e6ffa9c
New lf rfid (#342)
* invert inputs
* move RFID RX to IRQ, unstable
* remove critical blink
* supress short carrier, decrease queue
* migrate to stream buffer
* enable state change
* conditions build for invert RFID IN
* move get_rfid_in_level
* use hal function for get comp level, remove duplicate interrupt registration, interrupt unregister on exit
* reinit comparator context on mode change
2021-03-02 13:17:27 +03:00
coreglitch
2fbf427e0a
Switch sub-1GHz band (#349)
* switch band
* extract subghz api to files
2021-02-25 13:29:00 +03:00
あく
1b2c31da6f
Power subsystem improvements and bug fixes (#353)
* BT: render icon statically.
* Move API HAL Power init call to api_hal_init.
* API HAL Power: replace stop2 mode with stop1 to ensure usb and lptim2 proper work.
2021-02-25 13:22:46 +03:00
あく
a0db2986b5
Adjust I2C pins configuration: disable pullup and set speed to low (#352)
* Adjust I2C pins configuration: disable pullup and set speed to low
* promote i2c owner

Co-authored-by: aanper <mail@s3f.ru>
2021-02-25 12:50:57 +03:00
あく
68a3f6b4b7
[FL-873] Add F5 target, lp5562 driver and api-hal-light (#347)
* Add F5 target, lp5562 driver and api-hal-light. Update api-usage, switch to F5 by default.
* API HAL: add i2c and hardware version api. Dolphin: show hardware version.
* OTP version generator and flashing utility.
* Assets script: fix code formatting
* Backport F5 changes to F4
* F4: disable insomnia, prevent damage to BLE RX path
* F5 HAL API Light: remove magic delay to fix magic BLE
* Dolphin: HW target validation on start
* invert RSSI indication in sub-1
* API HAL: rename board to body in version api
* Gpio tester: detach and release viewport on exit

Co-authored-by: aanper <mail@s3f.ru>
2021-02-18 15:49:32 +03:00
あく
d2200a00d1
Update linker script to match upper bound (#345) 2021-02-16 13:57:35 +03:00
あく
b835d7a451
[FL-872] Furi, API-HAL, App-Loader cleanup and improvements (#334)
* Furi: replace obsolete furiac_exit with osThreadExit, drop obsolete apis and test. Rename systemd to flipper and move to separate file, cleanup. ApiHal: Rename timebase to os and move freertos hooks there, move insomnia api to power module.
* Furi: new thread helper
* Furi: cleanup thread documentation
* Flipper, AppLoader: update to use FuriThread. Update tasks signatures to match FuriThreadCallback signature.
* F4: rename API_HAL_TIMEBASE_DEBUG to API_HAL_OS_DEBUG
* Applications: rename FuriApplication to FlipperApplication, use FuriThreadCallback signature for apps.
* C++ app template sample, new exit method
2021-02-12 20:24:34 +03:00
あく
928bca4eaa
Api hal timebase: fix lptim lockups caused by flag clear outside of interrupt (#332) 2021-02-10 12:00:38 +03:00
あく
8b94eff7f9
Input: refactoring, platform agnostic key configuration.
Update input usage across project. Minor queue usage fixes and tick timings. (#330)
2021-02-10 11:56:05 +03:00
あく
9642f0d529
API HAL Power: enable smps by default (#324) 2021-02-04 15:20:27 +03:00
あく
8836e34840
[FL-831] Update DIS profile: add firmware generation and software version. Stack overflow fixes. (#322)
* BLE: prevent stack overflow in hrs thread
* BLE: add firmware and software attribute to dis service
* BLE: return tx to 0dBm
* BLE: update tx power configuration comment to match real value
2021-02-02 19:41:19 +03:00
coreglitch
41219cc78e
Fix werror flag and warnings (#321)
* fix Werror flag
* strdup implementation fix
* fix irda and lfrdid printf
* remove unused position
* doubtful type fix
* type fix in EXTI interrupt
* fix warnings in CubeWB, need to fork ST repo
* onewire fixes
* fork STM32WB Cube repo
2021-02-01 10:51:22 +03:00
DrZlo13
63a1a4e4d7
fix some bugs with sd spi (#320)
* change sd init speed
* add pullup on bus
2021-01-30 12:01:48 +03:00
あく
584c0962d8
[FL-781] FURI, CLI, stdlib: stdout hooks, integration between subsystems, uniform printf usage (#311)
* FURI stdglue: stdout hooks, local and global, ISR safe printf. Uniform newlines for terminal/debug output. Power: prevent sleep while core 2 has not started.
* Furi record, stdglue: check mutex allocation
* remove unused test
* Furi stdglue: buferized output, dynamically allocated state. Furi record: dynamically allocated state. Input dump: proper line ending. Hal VCP: dynamically allocated state.
* Interrupt manager: explicitly init list.
* Makefile: cleanup rules, fix broken dfu upload. F4: add compiler stack protection options.
* BLE: call debug uart callback on transmission complete
* FreeRTOS: add configUSE_NEWLIB_REENTRANT
* API HAL Timebase: fix issue with idle thread stack corruption caused by systick interrupt. BT: cleanup debug info output. FreeRTOS: disable reentry for newlib.
* F4: update stack protection CFLAGS to match used compiller
* F4: disable compiller stack protection because of incompatibility with current compiller
* Makefile: return openocd logs to gdb
* BLE: fixed pin, moar power, ble trace info.
* Prevent sleep when connection is active
* Makefile: return serial port to upload rule, add workaround for mac os
* Furi: prevent usage of stack for cmsis functions.
* F4: add missing includes, add debugger breakpoints
* Applications: per app stack size.
* Furi: honor kernel state in stdglue
* FreeRTOS: remove unused hooks
* Cleanup and format sources

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-01-29 03:09:33 +03:00
DrZlo13
cf1c8fb223
[FL-85][FL-446][FL-720] Dallas key blanks and OneWire lib rework (#313)
* sepate one wire class
* TM2004 writer
* app mode write ds1990
* test another blanks protocol
* new ibutton slave
* one wire states
* tim1 capture compare and update interrupts
* interrupt mgr, new timers IRQ
* discard HAL_TIM_PeriodElapsedCallback from main
* add exti_14 line
* add external interrupt callback
* use int mgr in input
* better interrupt managment
* add interrupt callback enable and disable fns
* properly init app
* changed timings
* rename one wire classes
* use new owb classes
* properly remove interrupts
* new blanks writer
* remove unused tests
* new core includes
* extern c guard
* fix api_interrupt_remove usage
* remove debug info, new way to detect blanks writing
* remove copy constructor
* change keys template
* fix app sources recipe
2021-01-28 15:30:31 +03:00
DrZlo13
8f9b2513ff
[FL-140] Core api dynamic records (#296)
* SYSTEM: tickless mode with deep sleep.
* Move FreeRTOS ticks to lptim2
* API: move all sumbodules init routines to one place. Timebase: working lptim2 at tick source.
* API Timebase: lp-timer routines, timer access safe zones prediction and synchronization. FreeRTOS: adjust configuration for tickless mode.
* NFC: support for tickless mode.
* API Timebase: improve tick error handling in IRQ. Apploader: use insomnia mode to run applications.
* BLE: prevent sleep while core2 starting
* HAL: nap while in insomnia mode
* init records work
* try to implement record delete
* tests and flapp
* flapp subsystem
* new core functions to get app stat, simplify core code
* fix thread termination
* add strdup to core
* fix tests
* Refactoring: remove all unusued parts, update API usage, aggreagate API sources and headers, new record storage
* Refactoring: update furi record api usage, cleanup code
* Fix broken merge for freertos apps
* Core, Target: fix compilation warnings
* Drop firmware target local
* HAL Timebase, Power, Clock: semaphore guarded access to clock and power modes, better sleep mode.
* SD-Filesystem: wait for all deps to arrive before adding widget. Core, BLE: disable debug dump to serial.
* delete old app example-ipc
* delete old app fatfs list
* fix strobe app, add input header
* delete old display driver
* comment old app qr-code
* fix sd-card test, add forced widget update
* remove unused new core test
* increase heap to 128k
* comment and assert old core tests
* fix syntax

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-01-20 19:09:26 +03:00
あく
6c4983c6b6
HAL Timebase, Power, Clock: semaphore guarded access to clock and power modes, better sleep mode. (#307) 2021-01-20 10:43:12 +03:00
あく
c8aca9ef48
[FL-667] Power saving: deep sleep in tickless state (#300)
* SYSTEM: tickless mode with deep sleep.
* Move FreeRTOS ticks to lptim2.
* API: move all sumbodules init routines to one place.
* Timebase: working lptim2 at tick source.
* API Timebase: lp-timer routines, timer access safe zones prediction and synchronization. 
* FreeRTOS: adjust configuration for tickless mode.
* NFC: support for tickless mode.
* API Timebase: improve tick error handling in IRQ. 
* Apploader: use insomnia mode to run applications.
* BLE: prevent sleep while core2 starting.
* HAL: nap while in insomnia mode.

Co-authored-by: coreglitch <mail@s3f.ru>
2021-01-18 18:08:58 +03:00
DrZlo13
9ed8bebba1
SPI Device API (#304)
* spi device config
* fix api_interrupt_call warning
* added configs for spi2 bus devices
* simplified spi bus api
* use new spi device api
2021-01-12 20:33:36 +03:00
DrZlo13
f94633863c
[FL-520] Filesystem Api and App (#280)
* update fatfs integer types
* fix sector size to 512
* fix sector size calculation
* common fs api
* fs api realization (sd card + fat fs)
* better sector size definition
* more api realization fns
* add error description api, add common api
* fix api flag naming, run app
* add fs_info call
* disable fatfs strfuncs, enable fatfs chmod
* rework filesystem app
* sd detect cycle, sd menu, sd eject feature
* fix sd detect cycle
* sd card format routine
* ui improvements, sd info routine
* properly unmount card
* separate mode flags
* add api folder, move app, rename app
* fix api naming
* update st-card-test to use api
* update path to app
* fixed potential problem of using sizeof union
* updated api documentation, new time/date fns
* update codeowners
* changed app requirements
* changed app order
* sd insert/remove log
2021-01-11 20:52:35 +06:00
あく
6928122650
FL-53: new NFC worker, A/B/F/V poll and display. (#283)
* GUI: view. Flooper-blooper fix compilation error.
* GUI: view and viewdispatcher bones
* GUI: view implementation, view models, view dispatcher
* GUI: view navigation, model refinement. Power: use view, view dispatcher.

* HAL Flash: proper page write. Dolphin: views. Power: views

* Dolphin: transition idle scree to Views
* Dolphin: input events on stats view. Format sources.

* HAL: flash erase. Dolphin: permanent state storage.

* Dolphin: first start welcome. HAL: flash operation status, errata 2.2.9 crutch.

* NFC: rewrite worker
* NFC: add support for B,F,V.
* NFC: replace rfal irq hanlder with realtime thread, more details about cards.

* Bootloader: LSE and RTS shenanigans, LED control, morse code for LSE failure error.

* F4: stop in Error_Handler

* BLE: handle working FUS, but empty radio stack.

* HAL: alive FUS is now sufficient for flash controller access

* Dolphin: update model after state load

* NFC: detect navigation

* RFAL: use osPriorityISR for isr thread

* NFC: emulation

* Bootloader: rollback incorrectly merged rename

* Dolphin: rollback incorrectly merged changes

* RFAL: remove volatile from thread attr

* RFAL: do not call platform ErrorHandler, error codes is enough

* NFC: improved error handling

* Format sources

* NFC: reset detect view model on start

* Format sources

* update codeowners

* NFC: hide last info if no card detected
2021-01-11 18:42:25 +06:00
あく
2cfe80cc36
Debug: add openocd freertos support (#302) 2021-01-11 14:27:20 +03:00
あく
1b78418f9f
FL-528 GUI: View, ViewDispather. Dolphin: first start. (#276)
* GUI: view. Flooper-blooper fix compilation error.
* GUI: view and viewdispatcher bones
* GUI: view implementation, view models, view dispatcher
* GUI: view navigation, model refinement. Power: use view, view dispatcher.
* HAL Flash: proper page write. Dolphin: views. Power: views
* Dolphin: transition idle scree to Views
* Dolphin: input events on stats view. Format sources.
* HAL: flash erase. Dolphin: permanent state storage.
* Dolphin: first start welcome. HAL: flash operation status, errata 2.2.9 crutch.
2021-01-08 10:42:48 +06:00
DrZlo13
d65e9b04ce
[FL-572][FL-577] Irda receive feature (#282)
* fix "state not acquired error"
* add InterruptTypeComparatorTrigger to interrupt mgr, use interrupt mgr in irda app
* separate init irda timer
* capture events buffer by app
* irda common decoder
* irda nec decoder realization
* finished work with decoder
* fix app path
* fix widget remove on exit
* nec receive, store and send
* init some packets
2021-01-07 22:28:35 +06:00
あく
88ed32483d
Power: set smps clock according to used inductor. RTC: do not reset clock on each start. (#281) 2021-01-07 02:03:37 +06:00
あく
bf97123ba8
Debug: adjust openocd config for max speed (#278) 2020-12-28 13:20:58 +06:00
aanper
14d1325b17 rename ioc 2020-12-26 12:09:23 +06:00
あく
9a257b048e
Power: more info (#274) 2020-12-23 00:16:32 +06:00
DrZlo13
8b6e7fd4ae
FL-443 Move sd card to second spi (#271)
* sd card spi 2 fix, add spi mgr
2020-12-19 13:52:17 +06:00
あく
73ecc7cde6
Rename Irukagotchi to Dolphin. Add basic game state structures. (#268)
* Rename Irukagotchi to Dolphin. Add basic game state structures.
* Dolphin: state, counters, api. BT: shared access to flash. Flash: write api.
* add fake -1 deeds, example of changing icounter

Co-authored-by: coreglitch <mail@s3f.ru>
2020-12-19 02:15:29 +06:00
DrZlo13
3ba1738acd
FL-262 Interrupt manager (#270)
* interrupt manager
* init interrupt manager
* add usage to lf-rfid app
* check ready flag
* move interrupts code to target hal
* fix path
2020-12-19 01:26:03 +06:00