* FuriHal: SPI refactoring, flexible bus reconfigration on fly, same desiag as i2c.
* Lib: update CC1101 driver documentation
* FuriHal: update spi symbol names to match naming convention.
* Project: fix release build, replace asserts with checks.
* FuriHal: i2c refactoring, new bus access model, flexible bus gpio configuration.
* FuriHal: set i2c pins to high on detach.
* FuriHal: more i2c bus events, put bus under reset when not used, move bus enable/disable routine to bus handler.
* FuriHal: fix i2c deadlock in power api, add external i2c handle.
* [FL-2051] BadUsb: new GUI
* add missing assets
* skip empty lines and leading spaces
* SubGhz: add alignment check to keystore mess with iv routine
Co-authored-by: あく <alleteam@gmail.com>
* USB-UART: new gui
* Furi: use furi_console for logging instead of printf.
* CDC: calling open/close callbacks on interface change
* fix vcp_tx block on disconnect
* USB mode set by struct pointer
* FuriHal: proper event sequence on vcp reconnect
* disable debug prints
* HAL: add context to UART IRQ's
* Context usage in UART IRQ and CDC callbacks
* USB-UART: geting rid of baudrate limitations
* FuriHal: remove struct pollutant in usb api.
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
* Toolbox: fix null pointer dereference in manchester decoder.
* FuriHal: use MPU to protect from null pointer dereference, replace flash driver with our own implementation.
* rpc: increase RPC buffer size. Add get available buffer size API
* bt: add flow control characteristic to serial service
* ble: change updating flow control characteristic logic
* rpc: add buffer is empty callback
* bt: add notification about empty RPC buffer
* ble: add more debug info
* serial_service: add mutex guarding available buffer size
* ble: remove debug logs in serial service
* Core: wipe memory after free. RFID,iButton: fix iterator use after invalidation.
* Debug: support unix wildcards for register matching in svd, update MCU description file and minify it.
* Toolbox: getter for File in FlipperFile.
* Makefile: conditional flashing
* SubGhz: keeloq_mfcodes encryption tool.
* FuriHal: proper IV handling on CBC in crypto. SubGhz: add support for encrypted keeloq keys. Makefile: move formatting to top Makefile.
* SubGhz: rename some function names to match naming scheme.
* SubGhz: encryption tool, fix windows line endings
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
- RPC: added CLI command to start session - all input bytes goes into RPC, all RPC output goes into VCP
- RPC: added command to close session (actually it only notifies transport layer)
- RPC: added recursive rmdir
- RPC: hard-coded listing for root directory (any, ext, int)
- Fixed CLI leak
- Fixed furi_record_delete leak
- Unit tests: repaired
- Unit tests: corrected output - remove excess, change dots with progress spinner
- Unit tests: added leak check
- Unit tests: SD mount check before start
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* ble-glue: add on connect \ disconnect, on send \ received callbacks
* bt: rework service with furi-hal-bt and callbacks
* bt: update battery level on connect
* ble-glue: set one callback with parameters
* bt: rework callbacks, remove unused API
* ble-glue: remove dead code
* furi-hal-bt: add documentation
* ble-glue: apply changes for f7 target
* bt: rename RpcInstance -> Rpc
* ble: add disconnection reason
* ble: don't open bt record from GAP
* bt: fix RPC session close
* Assets: separate targets for icons and protobuf
Co-authored-by: あく <alleteam@gmail.com>
* ToolBox: add manchester-decoder and manchester-encoder
* SubGhz: add new FM config cc1101
* Subghz: add protocol Kia
* SubGhz: fix receiving the last packet Nero Radio
* SubGhz: app protocol CAME Twin (TW2EE/TW4EE)
* SubGhz: add protocol CAME Atomo (AT03EV/ AT04EV)
* F7: sync with F6
* SubGhz: add frequency analyzer
* SubGhz: remove space from file name
* SubGhz: frequency analyzer add filter and fix view
* [FL-1939] GubGhz: Frequency analyzer redesign
* SubGhz: fix incorrect subghz api call sequence in frequency analyzer worker
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* FuriHal: add charge suppress API.
* FuriHal: add guards to insomnia and charge suppress routines.
* FuriHal: proper API for scheduler in power.
* FuriHal: move charging control from critical section, fix deadlock.
* Gui: use FreeRTOS native timers controls for IconAnimation, fix crash on animation start stop
* [FL-1811] FuriHal: move core2 startup to hal init stage, prevent working with flash controller till core2 startup finish. #704
* SubGhz: fix GO0 low on last hop transmission, decreased DutyCycle in tests
* SubGhz: test_static fix max 5 sec in transmission mode, DutyCycle <23%
* [FL-1815] SubGhz: prohibiting transmission if it is not within the permitted range for the given region
* SubGhz: fix F7 furi-hal-subghz
* SubGhz: fix logic working tests
* SubGhz: fix princeton encoder for test
* SubGhz: add log princeton encoder
* [FL-1856] Subghz: fix output a double error if the file cannot be opened
* [FL-1851] SubGhz: add deleting Stored Signals in SubGHz App
* SubGhz: add rename file SubGhz app
* SubGhz: update stats message in princeton
* SubGhz: correct spelling
* SubGhz: fix FM config, add hardware signal processing less than 16 μs, add added filter for processing short signals
* SubGhz: add Scher-Khan MAGICAR Dinamic protocol
* SubGhz: sync fury targets
Co-authored-by: あく <alleteam@gmail.com>
* bt: add authentication for all characteristics
* bt: app_ble cleanup
* bt: add start and stop advertising API
* bt: rework application with start and stop advertising API
* bt: support f7 target
* bt: f7 target remove unused files
* bt: stop advertising in bt debug application
* bt: fix bt status bar update
* bt: change bluetooth On Off order
* RFID: pull antenna down when emulating
* Rfid: fixed HID emulation by adding zero pulse every 4 bits
* Rfid: HID emulation fixed with DSP based FSK oscillator.
* Rfid: receive 125KHz clock for emulation timer from antenna and comparator
* Rfid: commented unused variable
* Firmware: rollback changes in f6.
* Add F7 target based on F6.
* F7/F6: update cube projects, apply changes to the targets, update linker scripts with correct RAM start values.
* FuriHal: RFID init routine.
* Scripts: update OTP tool for v11 board
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
* SubGhz: Add millis() furi, add subghz history struct
* SubGhz: Fix subghz history
* Gubghz: Fix code repeat history, add clean history
* SubGhz: reading and adding keys to history
* Gui: Renaming Sub 1-Ghz -> SubGhz
* Archive: Renaming Sub 1-Ghz -> SubGhz
* SubGhz: Add menu history, modified button for sending a signal, changed output of data about accepted protocol
* Archive: Fix name subghz
* SubGhz: Menu navigation
* Assets: Add assets/SubGHz/icon.png
* Assets: add new icons for subghz
* SubGhz: Fix name Add manually scene
* SubGhz: Fix load icon Read scene. rename encoder struct, rename protocol function load from file, add load raw data protocol, add info pleasant signals all protocol
* SubGhz: fix memory leak
* SubGhz: change of receiving frequency for read scene
* SubGhz: Add save/load frequency and preset, add automatic configuration of transmit/receive to the desired frequency and modulation, add button "save" config scene
* SubGhz: Fix frequency and preset, fix frequency add manualli scene, fix re-executing the parser
* Furi-hal-subghz: add 2-FSK config, fix ook config 650KHz BW Tx filter
* Fix formatting and release build
* SubGhz: Delete read scene
* SubGhz: Fix frequency add manualli scene, refactoring code
* SubGhz: 2 profiles for OOK, fix broken build.
* SubGhz: Add passing static codes from read scene, add notification read scene, refactoring code
* SubGhz: fix assert on worker double stop.
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
- Restrict with 31 bytes length for remote and signal name
- Don't stuck for 0 PWM cycle timings
- Support timings > 65535 PWM cycles
- Fix remote file open error
- Add IRDA TX debug redirect
- Add remote parse error print, improve parsing, support tabs
- Fix stucks with uncorrect RAW signal values, long strings in remote file, etc
- Fix HAL signals capturing (save previous read value)
- Fix leak in case of failed parsing
