* add minunit tests

* fix logging

* ignore unexisting time service on embedded targets

* fix warning, issue with printf

* add exitcode

* migrate to printf

* indicate test by leds

* add testing description

* redesigned minunit tests to allow testing in separate files

* add test step for local target

* add failure test

* add restore test_check

* testing description

Co-authored-by: rusdacent <rusdacentx0x08@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>

2020-10-10 13:32:06 +03:00

3.8 KiB

Raw Blame History

Building/debugging/emulating

Preparing for build

Install docker compose
After startup you should run docker-compose up -d to run the container.
Then you can run docker-compose exec dev make -C <target_dir> to build application.

If Dockerfile is changed you should run docker-compose down and docker-compose build for rebuild the image.

Local build

For simple case as unit tests or integration test that no require hardware we mock HW and replace RTOS syscalls to POSIX syscalls. We get simple linux app that easy to debug and get flexible control on hardware stubs.

You can run firmware locally (with HAL stub).

docker-compose exec dev make -C firmware TARGET=local APP_TEST=1 run for running tests
docker-compose exec dev make -C firmware TARGET=local APP_*=1 run for running examples (see applications/applications.mk for list of applications/examples)

For UI we do "UI emulator" (not implemented)

Web page with display and other UI elements, controls
Local (linux) version of firmware. All calls, writing data to UI like display or LED, redirects to unix socket writes, and messages from unix socket redirect to firmware (emulates button press, change batt level, insert/remove USB, etc.)
Webserver that run linux version fw, pass events from webpage to unixsocket and vice versa.

F2 build

docker-compose exec dev make -C firmware TARGET=f2 APP_*=1 flash for build and flash dev board (see applications/applications.mk for list of applications/examples)

Firmware emulation (not implemented)

For more HW- and RTOS- specific checks we run real FW in Renode

Running on remote Debug/test bench

Eventually we run real FW on remote debug/test bench (#26): flipper board + RPi + some stuff to control and check real hardware.

Debug/test bench (in progress)

24×7 connected target Flipper device and accessible via Internet. Raspberry PI or some Linux single-board PC can be used as basic high-level control board.
Tool can push/click each user buttons by hardware by "control board" (low level). Usage of optocouples/reed-switch relays is fine for that.
Connect other Flipper peripherals to target:
- 433 door bell/barrier controller, to read it status and it's remote control (to sniff it signal by flipper).
- Some iButtons and it's reader can be also connected to target.
- RFID reader under the target, to paste readed keys from it to out UART.
- RFID cards with different IDs. Can changed by servo or carousel from CD-changer
- IR-transmitter/receiver.
- ...all the peripherals, that we'll can realize...
"Hardware" USB peripherals (SWD programmer tool, etc?) reconnection and control of PWR, RST, BOOTx internal service lines, etc also need. This can be made by some software hacks or by relays.
Image from target display will be translated by webcam to web page.
WEB page, accessed to all developers (or maybe for everyone to view is better?) with these things:
- Target status area, Flipper control buttons, "connected" to real target. Power and service line switches.
- Ability to upload custom firmware binary to target. Take firmware build from CI/CD. Button to flash.
- Test tool UART with Flipper peripherals status and target device UART log also should be here.
OpenOCD connection from target (can be accessed from developers around the world by VPN or just port forwarding with IP access lists). So this feature allows deep remote debug.
List can be expanded with other good ideas...

Usage

Developers connect to target directly by shedule.
Run CI tests:
- For test automation we can use RobotDemo or simple expect tool/python scripts/etc.
- Apply test cases and submit its results.

Testing

You can read about testing in Testing page.

3.8 KiB Raw Blame History Unescape Escape