flipperzero-firmware/wiki/hw/Hardware-specification.md
2020-08-15 09:57:12 +03:00

1.3 KiB
Raw Blame History

Display

  • Monochrome LCD
  • Resolution: 128х64px
  • Diagonal: 1.4”
  • Orange LED backlight

LED

RGB LED

Control

  • 5-button joystick
  • Back button
  • Reboot — Back+Left buttons for 2 seconds

MCU

  • ARM® Cortex®-M4
  • 64 MHz
  • 1MB (1M x 8) FLASH

Sub-1 GHz Range

  • СС1101
  • TX/RX
  • Frequency: 433/434/315/868 Mhz
  • Modulation: ASK/FSK

USB

  • 1x USB 2.0 port, type C
  • USB device
  • Charging

GPIO

  • 0.65mm Female Header Connectors with 2.54 pitch
  • x12+ — Data pins / 5V tolerant
  • 2x — GND
  • 1x — 3.3V
  • 1x — 5V

125 khz RFID

  • Supported protocols: EM-4100, HID Prox
  • Operate modes: Reader/Writer/Emulator

iButton 1-Wire

  • Supported protocols: Dallas DS1990A, Cyphral, Metakom
  • Operate modes: Reader/Writer/Emulator

InfraRed

  • Supported frequency: 36-40 kHz
  • Operate modes: Reader/Emulator

Bluetooth

  • Bluetooth Low Energy 4.0+
  • STM32WB55

NFC

  • Supported protocols: Mifare
  • Operate modes: Reader/Emulator/Sniffer

Vibro

  • Type: Coin motor
  • RPM: ≥10000

Speaker

  • Type: Coin

Power and battery

  • Built-in not removable lithiumion battery 2000mAh
  • USB charging 5V, 500-2000mA
  • ≥10 days standby

Physical

  • Materials: PC
  • Weight: <200g
  • Size: ~98х40х22mm
  • Operating temperature: 0 ~ 50 °C