flipperzero-firmware/wiki/hw.md

Display

• Monochrome LCD
• Resolution: 128х64px
• Diagonal: 1.4”
• Orange LED backlight

LED

RGB LED

Control

• 5-button joystick
• Back button
• Reboot — Back+Left buttons for 2 seconds

MCU

• ARM® Cortex®-M4
• 80MHz
• 1MB (1M x 8) FLASH

Sub-1 GHz Range

• TX/RX
• Frequency: 433/434/315/868 Mhz
• Modulation: FM/AM
• Operate modes: Sniffer/Jammer/Emulator

USB

• 1x USB 2.0 port
• Charging
• Firmware flashing
• User Arduino sketches flashing (must not break normal system behaviour)

GPIO

• 0.65mm Female Header Connectors with 2.54 pitch
• x12+ — Data pins / 5V tolerant
• 2x — GND
• 1x — 3.3V
• 1x — 5V

125 khz RFID

• Supported protocols: EM-4100, HID Prox
• Operate modes: Reader/Writer/Emulator

iButton 1-Wire

• Supported protocols: Dallas DS1990A, Cyphral, Metakom
• Operate modes: Reader/Writer/Emulator

InfraRed

• Supported frequency: 36-40 kHz
• Operate modes: Reader/Emulator

Bluetooth

• Bluetooth Low Energy 4.0+
• Firmware flashing
• Data transfer from/to the app

NFC

• Supported protocols: Mifare
• Operate modes: Reader/Emulator/Sniffer

Vibro

• Type: Coin motor
• RPM: ≥10000

Speaker

• Type: Coin

Power and battery

• Built-in not removable lithium‑ion battery 2000mAh
• USB charging 5V, 500-2000mA
• ≥10 days standby

Physical

• Materials: PC
• Weight: <200g
• Size: ~98х40х22mm
• Operating temperature: 0 ~ 50 °C