* Improve Dynamic Range Compression - for some images with very high DR
* Clean code
* Improve TM fattal with saturation control in LA
* Saturation control fattal in LA
* Re-order paramsedit
* Change history_msg_tmo_satur with saturation
---------
Co-authored-by: U-PCSPECIALIST01\jdesm <jdesmis@gmail.com>
* Improve Dynamic Range Compression - for some images with very high DR
* Clean code
* Improve TM fattal with saturation control in LA
* Saturation control fattal in LA
* Re-order paramsedit
* Change history_msg_tmo_satur with saturation
* Improve Itcwb with non-raw files
* Change pre-dev builds wbrefinement
* Change template in pre-dev
* Improvment improccordinator.cc
* Forgotten observer convert
* Reenable wbauto autogrey as 5.8
* Remove wrong code
* Missing getrgbloc references
* Fixed bug due to bias in queu with temperaure correlation issue 6911
* Simpleprocess queue compatibility tif-jpg
* Preserve AWB edits from 5.9
In 5.9 for non-raw files,
1. RGB grey uses the unit multipliers with temperature bias applied.
2. Temperature correlation uses the equivalent of temperature 5000,
green 1, and red/blue equalizer 1.
* Refactor temperature correlation AWB code
* Fix inaccurate RGB grey WB preview after using ITC
The RGB grey automatic white balance algorithm caches the multipliers.
Temperature correlation automatic white balance also caches results to
the same location, but never uses it. This causes the RGB grey method to
produce incorrect results in the editor. Removing the temperature
correlation cache fixes the issue and does not have side-effects.
---------
Co-authored-by: U-PCSPECIALIST01\jdesm <jdesmis@gmail.com>
* Improve Itcwb with non-raw files
* Change pre-dev builds wbrefinement
* Change template in pre-dev
* Improvment improccordinator.cc
* Forgotten observer convert
* Reenable wbauto autogrey as 5.8
* Remove wrong code
* Missing getrgbloc references
* Fixed bug due to bias in queu with temperaure correlation issue 6911
* Simpleprocess queue compatibility tif-jpg
* Preserve AWB edits from 5.9
In 5.9 for non-raw files,
1. RGB grey uses the unit multipliers with temperature bias applied.
2. Temperature correlation uses the equivalent of temperature 5000,
green 1, and red/blue equalizer 1.
* Refactor temperature correlation AWB code
* Fix inaccurate RGB grey WB preview after using ITC
The RGB grey automatic white balance algorithm caches the multipliers.
Temperature correlation automatic white balance also caches results to
the same location, but never uses it. This causes the RGB grey method to
produce incorrect results in the editor. Removing the temperature
correlation cache fixes the issue and does not have side-effects.
---------
Co-authored-by: Lawrence Lee <45837045+Lawrence37@users.noreply.github.com>
Label initially says "Destination path for the first selected image appears here"
so the feature is discoverable. Select a file and it shows the destination path
that would be used if it is the first file to be processed and the file does
not already exist. Label is updated as the template is edited, so you can see the
effect of the edits. If "Save to folder" is selected, the previewed path uses
that folder.
Option to disable noise reduction automatic gain for consistency between
photographs.
Fix automatic gain not being recalculated after changing the white level
correction.
* Change estimchrom estim hue final
* Itcw observer checkbox
* 8 spectral colors
* 11 spectral colors
* 6 spectral colors
* Small change to correction green
* Fixed various bad behavior - settings itcwb_deltaspec
* 4 spectral colors green
* 3 green spectral colors
* 3 spectral colors green
* 5 spectral colors red green
* 3 spectral colors red green
* 3 spectral colrs green red
* Chnage slider choice deltaE - to size color patch
* display more info in console
* Display more info in console - comment code
* Clean - comment code
* 8 spectral colors green red
* 8 spectral colors blue
* 8 spectral colors blue
* 3 spectral colors
* 6 spectral colors
* 4 spectal colors
* 2 spectral colors
* Eliminate high Y - increse temp iteration - recenter selection inside patch
* compatibility 5.9
* Modify dislay and place selected dats in patch
* Dispaly in console hue chroma image selection
* First optimization
* optimization code - clean unused variables
* Remove sorted in chroma order - some others changes
* 5.9 compatibility
* Clean and optimize code
* Clean code - more display info in console
* More info in console - set itcwb_minsize in option
* Display patch chroma in GUI
* Change some default settings
* Minsize patch GUI
* Display GUI patch size
* Chroma patch variations
* Display in GUI min and max dats found in patch
* Some adjustments
* Remove too low datas in patch
* Various improvment - ponderate
* Clean code colortemp comment spectral datas
* Comment code - correc gren
* Comment and refine code
* Fixed bug in improcoordinator
* fixes a malfunction of AWB bias in improcoordinator
* Various improvments - clean code
* 2 improvments green and find patch
* Allows parametrind ponder and Ypurple in options
* Update autowb - filter on magenta purple
* Clean and optimize code
* Read colors in GUI
* Denoise median 5x5 image datas before Itcwb
* Change to GUI
* Replace median5x5 by 2 median3x3 - clean GUI code
* Work around to recalculate wbauto
* Remove work around - change params->wb related change
* Disabled low_sampling 5.9
* First try for compatibility Low sampling 5.9
* Re-enable WB autogrey
* Change reference image to autogrey if camera settings probably out
* Clean code aand adjust settings camera out
* Format astylert rawimagesource.cc - various small adjustments
* Small correction
* Small green correction
* Change default settings - correction to autowb bias in improccoordinator
* Save provisory work
* Save provisory work 2
* Try to find good tempitc with iterate when temptitc very different 5000K
* Change 2 default settings
* Work around awb temp bias
* Limit work around bias - small other changes
* 3 spectral colors deep blue
* 4 spectral color deep blue
* 4 color spectral yellow
* 5 spectral colors neutral red-magenta
* 5 spectral color neutral red magenta
* Change threshold tempitc
* 5.9 compatibility
* Work around bad claculation Planck's formula
* Fixed bad behavior when using blackbody spectal
* 6 spectral color - checkbutton remove 2 passes
* Fixed various bugs
* Format rawimagesource.cc
* Various improvment before to find the good selection
* First new optimization (perhaps?)
* Display GUI patc deltaE
* Various optimzation and tooltip
* Default observer 2°- Simplify GUI - improve display GUI - remove too low numbers datas
* 4 spectral colors - change 2 settings
* Change calculation threshold 2 passes
* 6 spectral colors magenta
* 13 spectral colors
* Improvment GUI display
* remove checkbutton no_purple
* 2 spectral colors - remove in GUI low sampling 5.9
* Change default setting display in console
* Change behavior when temp near stdA
* 4 spectral colors - settings Itcwb_tempstdA
* Gamut control on image histogram
* Clean code and format rawimagesource.cc
* Comment and format colortemp.cc
* Remove unused fileds from GUI - change tooltips
* Add tooltips
* Various changes
* Change settings when camera temperature is out
* improvment extra and tooltip
* Small change when using auto grey as start reference
* Remove itcwb_fgreen from GUI
* Various change - and 'unsatisfactory' test to take into account Custom
* Change second temp when < 4000 - replace automatic by automatic and refinement
* Neutralize 'Use custom tempertaure and green'
* Green refinement
* Clean code - small changes
* Other clean code
* Added forgotten itcw_green in procparams.cc
* Fixed a bug dispaly deltaE
* Change threshold settings - change code for Custom
* various change in case of using camera settings
* Change way to estimate range green
* clean code and message in console
* Clean and optimize
* Disable 2 passes if custom
* Improve GUI 2 passes
* Increase sampling and number of temperature above 9400K
* Hide AWB temperature bais and green refinement when Custom temerature ans green
* marks out the code with past time markers
* Improve time processing with spectral colors temp calculations
* Replace in console msec by nsec
* Scan temp 5.9
* Change max temp and behavior if temp > 15000k
* Refine temp near 14000K
* Increase sampling temperature 132 to 167
* Increase sampling temperature
* Set in preference choice for itcwb_custom
* White point calculated with observer instead of table
* More on whitepoint calculation - informations
* Clean and format code with astyle colortemp.cc rawimagesource.cc improccoordinator.cc
* Small change tooltip
* Improve update auto-wb
* Remove 'use custom temperature and tin' - simplify sampling to 2 choice
* Small change to rand AWB bias - green refinement - tooltips
* slightly modify the parameters upstream of the algo - do not use camera in some cases
* Mixed initial green
* Refine init green and temp when no camera
* Refine temp and green in do not use camera settings
* Change tint threshold and various improvments (tooltips, wrong values..)
* Refinment and clean code
* Improve mode No use camera settings
* Init nocam
* Refine use no camera settings
* Small change
* 5.9 compatibility - and format
* Refine sampling temperature around 7000 - 8000K
* Format astylert rawimagesource colortemp
* 5.9 settings
* 5.9 settings 2
* Various change - 5.9 - format
* Improve pre and post algorithm
* Fixed correction temp > 8000K
* Fixed bad behavior Tppat.minchroma
* Change sampling choices and tooltip
* Change name wp wp2 wip to wb wb2 iwb to avoid misunderstood
* Small Change settings - limit display studgood to 0.0001
* Improvment display GUI temp
* Change default sampling
* Change ACESP0 to JDCmax
* Improve GUI abstract profile
* Allows dispaly in console xy values thanks to Reffort
* Remove bruce rgb in wp and abstract
* Change wp abstract and save itcwb with dispaly cellxy
* Change prim = 13 improccoordinator iplab2rgb
* remove display datas in console - fixed wrong display Y xyY
* Fixed ifferences in GUI maxhist minhist
* Change limits x y in function sampling
* fixed a dizziness
* Change after algorithm rule when temp > 6000K
* Harmonize limx limy for oldsampling 5.9
* Added Cam xyz matrix to sampling - thanks to Reffort
* Display in console xyz matrix
* Forgotten instruction when mix camera and autowb grey
* Change rgbloc with Camera matrix Dcraw when no input profile
* Change rep to repref in rgbxyz
* Remove message in console
* 5.9 compat
* 5.9 compat 2
* 5.9 compat 3
* 5.9 compat 4
* 5.9 compat 5 format
* 5.9 compta 6
* Improve code
* Diasble itcwb_sampling in GUI
* Comment code
* Clean and comment code
* 5 spectral colors
* 9 spectral colors
* 2 spectral colors
* Various improvments
* 5 spectral colors
* 5 spectral colors
* First changes review lawrence37
* Second changes review Lawrence37
* 3rd changes review Lawrence37
* 4th changes review Lawrence37
* Change windows and appimage yml
* Re-enable Rtv4_Bruce in procparams.cc
* test for 5.9 compatibility
* Try to fixed crash
* Slightly improve the management of 5.9
* test for 5.9 compatibility by passing parameters via the GUI
* Forgotten parameter
* Change ref_spec limit and remove pac_start for itcwb_sampling
* Puts back the old Planck formula - the same as in dev
* Revert "test for 5.9 compatibility by passing parameters via the GUI"
This reverts commit d6b5a8feda31b93a5574cee6ebf4d3e9d58bbcfb.
* Switch to new ITCWB only when changing WB method
Prevents sudden changing of the white balance if ITCWB is selected and
the image is reopened.
* Fix spelling in comment
* Suggested change from Lawrence37 to whitebalance - small change to improcoordinator
* tempbias Set_sentive(false) if itcwb_smapling - clean whitebalance
* Another clean whitebalance.cc
---------
Co-authored-by: Lawrence Lee <45837045+Lawrence37@users.noreply.github.com>
