Commit Graph

1117 Commits

Author SHA1 Message Date
あく
f5175e1388
Music player rework (#1189)
* Music player: cli tool and new worker
* Music player cli: flush message
* Music player: fix note calculation
* MusicPlayer: fix # parsing and add magic
* FuriHal: improve speaker volume handling. MusicPlayer: minor sustain improvements
* MusicPlayer: fix buffer overseek
* FuriHal: drop unused variables
* MusicPlayer: LFO 4 magic
* MusicPlayer: add RTTTL parser
* MusicPlayer: refactoring and add file open dialog on start
* MusicPlayer: fix memcpy issue and more
* FuriHal: force disconnect USB on early init and then leave usb line alone for some time.
* FuriHal: switch speaker to old volume. MusicPlayer: fix incorrect note history, and drop lfo from worker.

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2022-05-05 12:49:59 +03:00
Nikolay Minaylov
0c85b88873
[FL-2512] Archive favourites fixes (#1195)
* Archive favourites fixes
* Archive: navigation history fix

Co-authored-by: あく <alleteam@gmail.com>
2022-05-05 01:51:45 +03:00
Skorpionm
f4a205142d
SubGhz: bug fixes (#1192)
* Subghz: fix simultaneous detection of Princeton and GateTx
* SubGhz: fix phantom frequencies in the Frequency Analyzer
2022-05-05 01:34:44 +03:00
hedger
7017fa4f9e
[FL-2515] Keep backlight on for updater ops (#1184)
* [FL-2515] Keep backlight on for updater ops
* Notification: Renamed backlight sequences to more obvious names

Co-authored-by: あく <alleteam@gmail.com>
2022-04-29 17:21:12 +03:00
Georgii Surkov
01434265f6
[FL-2399, FL-2261] Tickless sleep shenanigans (#1168)
* Disable USART in sleep
* Restore UART state on suspend/resume
* FuriHal: Enable stop mode and add insomnia to I2C and SPI
* Remove IDLE interrupt
* FuriHal: add FPU isr and disable all FPU interrupt, add core2 stop mode configuration on deep sleep
* FuriHal: tie stop mode debug with debug rtc flag
* FuriHal: adjust flash latency on clock switch, tie mcu debug with RTC debug flag
* FuriHal: move resource init to early stage
* Add EXTI pending check, enable debug traps with compile-time flag
* Wrap sleep debug functions in conditional compilation
* Remove erroneous changed
* Do not use CSS, remove it from everywhere
* Enable/disable USB on VBUS connect (prototype)
* FuriHal: add LPMS and DEEPSLEEP magic, workaround state inconsistency between cores
* FuriHal: honor c1 LMPS
* USB mode switch fix
* Applications: add flags and insomnia bypass system
* Correct spelling
* FuriHal: cleanup insomnia usage, reset sleep flags on wakeup, add shutdown api
* FuriHal: extra check on reinit request
* FuriHal: rename gpio_display_rst pin to gpio_display_rst_n
* FuriHal: add debug HAL
* FuriHal: add some magic to core2 reload procedure, fix issue with crash on ble keyboard exit
* FuriHal: cleanup ble glue, add BLE_GLUE_DEBUG flag
* FuriHal: ble reinit API, move os timer to LPTIM1 for deep sleep capability, shutdown that works
* FuriHal: take insomnia while shutdown
* Remove USB switch on/off on VBUS change
* Better tick skew handling
* Improve tick consistency under load
* Add USB_HP dummy IRQ handler
* Move interrupt check closer to sleep
* Clean up includes
* Re-enable Insomnia globally
* FuriHal: enable CSS
* FuriHal: remove questionable core2 clock shenanigans
* FuriHal: use core1 RCC registers in idle timer config
* FuriHal: return back CSS handlers, add lptim isr dispatching

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
2022-04-29 16:29:51 +03:00
Skorpionm
73477cceed
SubGhz add protocol Firefly (#1183)
* SubGhz: add protocol "Firefly"
* SubGhz: refactoring "Add Manually" scene
* SubGhz: refactoring Firefly protocol

Co-authored-by: あく <alleteam@gmail.com>
2022-04-29 15:17:42 +03:00
Nikolay Minaylov
0eac917f91
[FL-2163] CLI: Separate session from CLI service (#1130)
* CLI: session refactoring
* Added forgotten define
* Desktop lock state save
* Dolphin: use proper type for value returned by dolphin_state_xp_to_levelup

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-04-29 15:02:17 +03:00
Nikolay Minaylov
4526503d81
[FL-2456] App notifications update (#1175)
* Notifications update: SubGHz
* Notifications: ibutton, infrared, rfid
2022-04-28 20:20:59 +03:00
hedger
fe254d469f
[FL-2510] Fixed BT startup while backing up LFS (#1180)
* Waiting for dummy BT record on LFS ops; cleaner retry for backup file open
* Fixed files not being closed on failed open
2022-04-28 19:05:37 +03:00
Nikolay Minaylov
19f42c5290
[FL-2495] Archive: Refresh file list on application exit #1170
Co-authored-by: あく <alleteam@gmail.com>
2022-04-27 19:34:37 +03:00
Nikolay Minaylov
2034b6ac4a
[FL-2494, FL-2497] PIN Lock refactoring, IR library fix (#1167)
* PIN Lock refactoring
* Change tv.ir file type to prevent opening from archive
* Manifest update
* Assets: enforce sorting in fs traversal

Co-authored-by: あく <alleteam@gmail.com>
2022-04-27 19:30:37 +03:00
SG
c60562a02c
[FL-2502] Properly closing directory on free (#1174)
* Storage: better (at least working) mechanism to distinguish between files and dirs
* Storage API: debug log
* TarArchive: fix stream memleak
* TarArchive: fix another memleak
* Storage: better logs
* Storage: changed the log level to trace

Co-authored-by: あく <alleteam@gmail.com>
2022-04-27 19:16:06 +03:00
hedger
7ce305fca3
[FL-2269] Core2 OTA (#1144)
* C2OTA: wip
* Update Cube to 1.13.3
* Fixed prio
* Functional Core2 updater
* Removed hardware CRC usage; code cleanup & linter fixes
* Moved hardcoded stack params to copro.mk
* Fixing CI bundling of core2 fw
* Removed last traces of hardcoded radio stack
* OB processing draft
* Python scripts cleanup
* Support for comments in ob data
* Sacrificed SD card icon in favor of faster update. Waiting for Storage fix
* Additional handling for OB mismatched values
* Description for new furi_hal apis; spelling fixes
* Rework of OB write, WIP
* Properly restarting OB verification loop
* Split update_task_workers.c
* Checking OBs after enabling post-update mode
* Moved OB verification before flashing
* Removed ob.data for custom stacks
* Fixed progress calculation for OB
* Removed unnecessary OB mask cast

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-04-27 18:53:48 +03:00
Jack Doan
81aeda86db
NFC: fix memory corruption in nfc_worker_read_mifare_desfire (#1156)
* NFC: fix memory corruption in nfc_worker_read_mifare_desfire
* NFC: if the NFC tag doesn't have apps or files, don't try to save them.
* NFC: make-format

Co-authored-by: Jack Doan <jackdoan@rivian.com>
Co-authored-by: Skorpionm <85568270+Skorpionm@users.noreply.github.com>
Co-authored-by: Nikolay Minaylov <nm29719@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
2022-04-25 17:59:48 +03:00
あく
b28d408b49
[FL-2493] Infrared: fix crash on invalid name. Input: cancel info in dump command. (#1153)
* Infrared: fix crash on invalid name. Input: cancel info in dump command.
* FuriHal: add abort handler
2022-04-23 04:56:59 +03:00
Dmitry Pavlov
ec71a5c9d8
[FL-2455] LFRFID, iButton: more-menu fix (#1151)
* Items order changed
* iButton,Rfid: correct order in enums

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-04-22 22:01:21 +03:00
Skorpionm
0ff9f43eab
SubGhz: loading/saving files from any folder below the parent (#1142)
Co-authored-by: あく <alleteam@gmail.com>
2022-04-21 19:10:50 +03:00
gornekich
7c692a9f36
[FL-2432], [FL-2487] Rework bt keys load and save (#1139)
* bt keys: rework load and save with saved_struct
* bt: rename bt keys storage functions
* furi_hal_nfc: allow context switch during emilation
* bt settings: rework with saved struct
* infrared: replace file worker with dialogs and storage
* Core, Loader: fix thread allocation tracking, much better, so wow.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-04-21 18:36:53 +03:00
Nikolay Minaylov
ad1ee8a5c6
[FL-2463, FL-2471, FL-2472, FL-2473] Notifications, GUI elements, archive fixes #1137 2022-04-21 15:33:03 +03:00
gornekich
cea118cf2d
[FL-2470, FL-2385, FL-2411] NFC fixes (#1138)
* mifare classic: increase data exchange timeout
* nfc: exit from app if can't parse file
* furi_hal_nfc: allow to switch context during detect

Co-authored-by: あく <alleteam@gmail.com>
2022-04-20 17:08:36 +03:00
Skorpionm
d530d164b9
[FL-2459, FL-2469]SubGhz: displaying a long name in RAW, launching files from subfolders, bugfix (#1125)
* SubGhz: fix the RAW file is not restored when it is launched from under the folder
* SubGhz: fix does not fit long RAW file name
* SubGhz: fix Read not cleared after file rename
* SubGhz: fix restore default frequency and modulation on output
* SubGhz: fix long name output in RAW
2022-04-20 16:51:24 +03:00
gornekich
9351076c89
[FL-2475] Text Box add three dots trim option (#1136)
* introduce text box debug application
* text box: add strip to dots option
* applications: update text box usage

Co-authored-by: あく <alleteam@gmail.com>
2022-04-19 22:23:50 +03:00
hedger
57312961e8
[FL-2481] Renamed assets->resources; enforcing Manifest build if it does not exist (#1135)
* Renamed assets->resources; enforcing Manifest build if it does not exist
* Rebuild resources from CI
* Added Manifest to repo - be sure to rebuild it with `make -C assets` before committing changes!
* Actually added Manifest.
* Keeping Manifest on assets clean
* Spelling fix in Makefile
2022-04-19 22:02:37 +03:00
gornekich
956788c09b
[FL-2369] NFC refactoring (#1095)
* nfc: clean up scenes
* nfc worker: remove field on from worker
* nfc worker: move full data exchange to furi hal
* nfc_device: check UID length
* nfc protocol: introduce mifare common API
* nfc: move common data to furi hal nfc
* nfc: rename emv_decoder -> emv
* nfc: move emv data structure to emv lib
* nfc: remove deactivate after detection
* nfc: rework furi hal nfc detect
* nfc: clean up CLI commands and type
* nfc: remove unused includes and function
* nfc: add TxRxType enum
* nfc: read mifare ultralight refactoring
* nfc: refactore mifare ultralight start
* rfal: fix custom data exchange
* nfc: refactor read bank card
* nfc: refactor read emv application
* nfc: refactor emv test emulation
* nfc: refactor uid emulation
* nfc: add limit to uid emulation logger
* fix source formatting
* furi_hal_nfc: fix data exchange full
* nfc: fix mifare ultralight type load

Co-authored-by: あく <alleteam@gmail.com>
2022-04-19 18:23:58 +03:00
Dmitry Pavlov
e55d1572da
[FL-2343] IR: Rename the left button #1134 2022-04-19 18:15:42 +03:00
Dmitry Pavlov
29e5e57a70
[FL-2461] IR: change word from key to button (#1119)
* 2461 ir renamed menu items
* Renamed the key to the button

Co-authored-by: あく <alleteam@gmail.com>
2022-04-19 14:07:14 +03:00
gornekich
ac44b9bc69
Loader: always search application in debug apps list (#1133) 2022-04-19 11:43:58 +03:00
Dmitry Pavlov
1e30ebc5a3
[FL-2345] Archive: rename left button in delete scene #1132
Co-authored-by: あく <alleteam@gmail.com>
2022-04-19 11:07:35 +03:00
hedger
e8499e4ede
[FL-2477] Updater support for resource bundles (#1131)
* Resource unpacking core
* Added more fields to manifest; updated dist scripts
* Python linter fixes
* Parsing manifest before unpacking
* Updated pipelines for separate resource build
* Removed raw path formatting
* Visual progress for resource extraction
* Renamed update status enum

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-04-19 11:03:28 +03:00
あく
1623134a82
Build system improvements and bug fixes (#1129)
* Assets: recompile
* Makefile: add debug_other to main makefile
* Github: stop compilation if compiled assets not in sync with assets sources
* Assets: recompile
* Makefile: correct debug_other rule. Bt: prevent on system start hook from waiting for bt service
* Power, FuriHal: gauge self check report
* Loader: move on system start hook call to the beginning
2022-04-19 02:09:11 +03:00
あく
703844dd69
Desktop: use right button to open passport (#1127) 2022-04-18 15:34:18 +03:00
あく
d993c1f98e
Gui: add missing redraw call after layer change (#1126) 2022-04-18 01:29:45 +03:00
hedger
827e30aa5a
[FL-2468] Reboot to update with RPC (#1122)
* Added update boot mode for RPC
* Fixed FLIPPER_SYSTEM_APPS_COUNT & updater app arg parsing
* Bumped RPC version
* Moved boot mode
2022-04-15 19:47:57 +03:00
あく
c209ec56fc
Release Candidate Bug Fixes and Improvements (#1121)
* Notification: use all input for backlight, otherwise it is causing issues on repeat. Dolphin: rework debug tools.

* Notification: remove unused variable

* Applications: fix incorrect count in system apps list

* SubGhz: fix memory leak in settings

* SubGhz: fix incorrect frequency in newly created keys

* Loader: make cli command parallel safe
2022-04-15 19:31:25 +03:00
Dmitry Pavlov
3e5b030663
[FL-2458] Change iButton read success picture (#1115)
Co-authored-by: あく <alleteam@gmail.com>
2022-04-14 20:14:41 +03:00
Nikolay Minaylov
e67cdbdff8
[FL-2433] Archive: Fix favourites rescan (#1112)
* Archive: fix favourites rescan
* Archive: fix favourites move

Co-authored-by: あく <alleteam@gmail.com>
2022-04-14 20:02:16 +03:00
あく
9b9edf2fbf
[FL-2460] Rpc: debug request logging and cli log command (#1114)
* Rpc: debug request logging
* Furi, Cli: replace global thread callback with local ring buffers, fix log command
2022-04-14 19:41:15 +03:00
あく
c078bbcb0e
[FL-2428] region name in about (#1113) 2022-04-14 18:08:29 +03:00
Skorpionm
a5cc3453c8
SubGhz: support for custom frequencies for SubGhz (#1108)
* SubGhz: add load setting
* SubGhz: add support file upload with custom frequencies
* SubGhz: add load region setting
* SubGhz: fix syntax
* SubGhz: fix furi_halt error
* Desktop: hide dolphin controls in production build
* Notification: fix crash on NotificationMessageTypeLedDisplayUnlock message

Co-authored-by: あく <alleteam@gmail.com>
2022-04-14 17:05:40 +03:00
Skorpionm
8cc3fd579c
SubGhz: Unit_test and bugfixes (#1104)
* SubGhz: CLI add "subghz decode_raw"
* SubGhz: unit_test
* SubGhz: add Hormann_hsm_raw unit_test
* SubGhz: fix duration raw
* Unit_test: fix total test timer
* SubGHz: fix name display scher_khan
* SubGhz: fix deviation protocol kia
* SubGhz: return max name length to previous value
* FuriHal: correctly handle mute in speaker
* UnitTests: fix grammar in subghz

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-04-14 15:49:29 +03:00
Georgii Surkov
917be9c6d3
[FL-2430] Automatic Desktop Locking (#1101)
* Add Auto Lock Time setting
* Update .gitignore
* Add value_index toolbox module
* Auto locking basic implementation
* Better AutoLock implementation, edge cases and cleanup
* Fix NULL pointer crash
* Turn off backlight shortly in locked mode
* Re-enable auto lock after pin lock
* Correctly handle start when pin locked
* Use timer to hide locked hint
* Use a single state variable instead of multiple bools
* Do not call update callback recursively
* Allow input when the Unlocked hint is shown
* Add a delay to backlight switch off while locking
* Better user input handling
* Switch backlight off after pin timeout
* Correct grammar in notification settings

Co-authored-by: あく <alleteam@gmail.com>
2022-04-14 15:20:41 +03:00
Nikolay Minaylov
779d319069
[FL-2220, FL-2221, FL-1883] RFID and iButton GUI update (#1107)
* RFID and iButton gui update
* Grammar nazi: readed -> read
* Grammar nazi pt.2: writed -> written

Co-authored-by: あく <alleteam@gmail.com>
2022-04-14 15:03:47 +03:00
Nikolay Minaylov
72a6bbb8ad
[FL-2433, FL-2408] Get rid of file_worker in archive and various fixes (#1105)
* Archive: get rid of file_worker and various fixes
* USB init moved to CLI service
2022-04-14 14:28:59 +03:00
hedger
e02040107b
[FL-2263] Flasher service & RAM exec (#1006)
* WIP on stripping fw
* Compact FW build - use RAM_EXEC=1 COMPACT=1 DEBUG=0
* Fixed uninitialized storage struct; small fixes to compact fw
* Flasher srv w/mocked flash ops
* Fixed typos & accomodated FFF changes
* Alternative fw startup branch
* Working load & jmp to RAM fw
* +manifest processing for stage loader; + crc verification for stage payload
* Fixed questionable code & potential leaks
* Lowered screen update rate; added radio stack update stubs; working dfu write
* Console EP with manifest & stage validation
* Added microtar lib; minor ui fixes for updater
* Removed microtar
* Removed mtar #2
* Added a better version of microtar
* TAR archive api; LFS backup & restore core
* Recursive backup/restore
* LFS worker thread
* Added system apps to loader - not visible in UI; full update process with restarts
* Typo fix
* Dropped BL & f6; tooling for updater WIP
* Minor py fixes
* Minor fixes to make it build after merge
* Ported flash workaround from BL + fixed visuals
* Minor cleanup
* Chmod + loader app search fix
* Python linter fix
* Removed usb stuff & float read support for staged loader == -10% of binary size
* Added backup/restore & update pb requests
* Added stub impl to RPC for backup/restore/update commands
* Reworked TAR to use borrowed Storage api; slightly reduced build size by removing `static string`; hidden update-related RPC behind defines
* Moved backup&restore to storage
* Fixed new message types
* Backup/restore/update RPC impl
* Moved furi_hal_crc to LL; minor fixes
* CRC HAL rework to LL
* Purging STM HAL
* Brought back minimal DFU boot mode (no gui); additional crc state checks
* Added splash screen, BROKEN usb function
* Clock init rework WIP
* Stripped graphics from DFU mode
* Temp fix for unused static fun
* WIP update picker - broken!
* Fixed UI
* Bumping version
* Fixed RTC setup
* Backup to update folder instead of ext root
* Removed unused scenes & more usb remnants from staged loader
* CI updates
* Fixed update bundle name
* Temporary restored USB handler
* Attempt to prevent .text corruption
* Comments on how I spent this Saturday
* Added update file icon
* Documentation updates
* Moved common code to lib folder
* Storage: more unit tests
* Storage: blocking dir open, differentiate file and dir when freed.
* Major refactoring; added input processing to updater to allow retrying on failures (not very useful prob). Added API for extraction of thread return value
* Removed re-init check for manifest
* Changed low-level path manipulation to toolbox/path.h; makefile cleanup; tiny fix in lint.py
* Increased update worker stack size
* Text fixes in backup CLI
* Displaying number of update stages to run; removed timeout in handling errors
* Bumping version
* Added thread cleanup for spawner thread
* Updated build targets to exclude firmware bundle from 'ALL'
* Fixed makefile for update_package; skipping VCP init for update mode (ugly)
* Switched github build from ALL to update_package
* Added +x for dist_update.sh
* Cli: add total heap size to "free" command
* Moved (RAM) suffix to build version instead of git commit no.
* DFU comment
* Some fixes suggested by clang-tidy
* Fixed recursive PREFIX macro
* Makefile: gather all new rules in updater namespace. FuriHal: rename bootloader to boot, isr safe delays
* Github: correct build target name in firmware build
* FuriHal: move target switch to boot
* Makefile: fix firmware flash
* Furi, FuriHal: move kernel start to furi, early init
* Drop bootloader related stuff
* Drop cube. Drop bootloader linker script.
* Renamed update_hl, moved constants to #defines
* Moved update-related boot mode to separate bitfield
* Reworked updater cli to single entry point; fixed crash on tar cleanup
* Added Python replacement for dist shell scripts
* Linter fixes for dist.py +x
* Fixes for environment suffix
* Dropped bash scripts
* Added dirty build flag to version structure & interfaces
* Version string escapes
* Fixed flag logic in dist.py; added support for App instances being imported and not terminating the whole program
* Fixed fw address in ReadMe.md
* Rpc: fix crash on double screen start
* Return back original boot behavior and fix jump to system bootloader
* Cleanup code, add error sequence for RTC
* Update firmware readme
* FuriHal: drop boot, restructure RTC registers usage and add header register check
* Furi goes first
* Toolchain: add ccache support
* Renamed update bundle dir

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
2022-04-13 23:50:25 +03:00
Dmitry Pavlov
a25552eb99
[FL-2344] iButton deleted back button (#1096)
Co-authored-by: あく <alleteam@gmail.com>
2022-04-11 14:59:50 +03:00
Dmitry Pavlov
b22ad77bbe
[FL-2438] Correct grammar in menus and application names (#1102)
* [FL-2403] Changed (Name and save) buttons name
* [FL-2403] NFC Reading revert LED color to blue
* [FL-2438] Capital_letter_menu_names
* [FL-2438] Capital_letter_menu_names
* [FL-2438] Rename and unify menu items with capitals
* [FL-2438] Capital_letter_menu_and_returned_Empty_folder
* [FL-2438] Capital_letter_menu_and_returned_Empty_folder_label
* [FL-2438] Capital_letter_menu_and_returned_Empty_folder_label_reformating

Co-authored-by: あく <alleteam@gmail.com>
2022-04-11 14:54:38 +03:00
Skorpionm
7d022c6fda
[FL-2439] SubGhz: fix magic numbers and description in crash (#1103)
* [FL-2439] SubGhz: fix magic numbers and description on crash
2022-04-09 21:47:14 +03:00
Skorpionm
435205de33
[FL-2427] SubGhz: fix Sub-Ghz RAW not working in Japan region (#1099)
Co-authored-by: あく <alleteam@gmail.com>
2022-04-07 18:48:07 +03:00
Nikolay Minaylov
d635890342
[FL-2297, FL-2289] Power info command, Validator fixes (#1097)
* Power info command, validator fixes
* strdup in validator, fix memory leak
* furi_hal_crypto fixed again
* FuriHal: limit ARR and CC in speaker hal
* FuriHal: LL_TIM_DisableAllOutputs in speaker stop
* Rpc: fix memory leak in screen streaming
* Get rid of crypto_enable/crypto_disable

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-04-07 18:00:45 +03:00
Skorpionm
02b9cf90d5
[FL-2431, FL-2419] SubGhz: bugfixes (#1098)
* [FL-2431] SubGhz: fix Restart with an error (HardFault), while maintaining the RAW signal.
* Stream: fix adding maximum string length to arguments
* [FL-2419] SubGhz: fix flipper hang/Fatal Error when running edited Sub-GHz file.
* SubGhz: remove replace strcpy with strncpy, smaller text buffer and canary
* SubGhz: log key loading before load happen, rollback only rx message handling

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-04-07 14:47:47 +03:00
Dmitry Pavlov
321f36d113
[FL-2403] Changed (Name and save) buttons name (#1094)
Co-authored-by: あく <alleteam@gmail.com>
2022-04-06 21:34:51 +03:00
Nikolay Minaylov
b43dcbd74f
[FL-2414, FL-2417] Archive: Unlimited file list and various fixes (#1089)
* Archive: unlimited file list and various fixes
* Recursive remove fix
2022-04-06 20:44:06 +03:00
agathakazar
5a8961764e
Minor grammar and spelling fixes (#1091)
* Minor grammar and spelling fixes in RoadMap
* TV's to TVs because grammar
2022-04-06 13:40:29 +03:00
SG
e5a1f20fd4
[FL-2423] Storage: blocking dir open (#1083)
* Storage: more unit tests
* Storage: blocking dir open, differentiate file and dir when freed.

Co-authored-by: あく <alleteam@gmail.com>
2022-04-04 15:27:48 +03:00
Arman Yeghiazaryan
88cb90783d
Corrected variables name's typos #1082
Co-authored-by: SG <who.just.the.doctor@gmail.com>
2022-04-03 21:06:20 +03:00
SG
855f2584ab
[FL-2415] Storage: blocking file open (#1078)
* Storage: correct replacement for "/any" path in path holder
* Unit tests: storage, blocking file open test
* File stream: error getter
* Storage: common copy and common remove now executes in external thread
* Filesystems: got rid of unused functions
* Storage: untangle dependencies, ram-frendly filesystem api
* iButton: context assertions
* Storage: pubsub messages
* Storage: wait for the file to close if it was open
* Storage: fix folder copying
* Storage: unit test
* Storage: pubsub documentation
* Fix merge error
* Fix memleak in storage test
* Storage: remove unused define

Co-authored-by: あく <alleteam@gmail.com>
2022-04-01 15:21:31 +03:00
Skorpionm
cb7d43f7e1
[FL-2410] SubGhz: fix launching an incorrect Sub-GHz key from the archive. (#1080) 2022-04-01 14:10:21 +03:00
gornekich
0bf2702210
Fix GUI freeze after NFC classic read (#1074)
* nfc worker: add delay for task switching
* device info service: fix rpc version characteristic
* firmware: move FreeRTOSConfig.h to target include
* dev_info service: fix typo
* ble glue: use osThreadFlags instead of osEventFlags
* Infrared: fix issue with timer lockup
* FuriHal: yeld in flash lock routine
* ble: change connection parameters, display actual params
* ble: verify connection parameters
* ble: fix typo

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-03-31 17:57:23 +03:00
Nikolay Minaylov
8b833cb7eb
[FL-2378, FL-2382] Archive and infrared fixes #1073 2022-03-30 20:05:44 +03:00
Nikolay Minaylov
2f3ea9494e
HAL to LL migration: GPIO, HSEM, AES (#1069)
* gpio, hsem, crypto: switch from HAL to LL/registers
* Moved GPIO initialization to furi_hal
* More HAL removed
* All HAL modules disabled
* HAL is finally removed
* hal_gpio -> furi_hal_gpio, main.h removed
* Bootloader build fix
* RTOS config moved to freertos-glue
* delay -> furi_hal_delay

Co-authored-by: あく <alleteam@gmail.com>
2022-03-30 18:23:40 +03:00
SG
648d8aaa54
[FL-2381] iButton CLI: update Metakom description, add forgotten read message #1072 2022-03-30 14:54:29 +03:00
あく
489caa8e77
[FL-2392] FuriHal: refactor interrupts subsystem (#1066)
* FuriHal: refactor interrupts subsystem

* Furi,FuriHal: gather all ISRs under interrupt API, improve crtitical section and cleanup garbage

* FuriHal: mirgate ipcc and hsem to LL

* Format Sources

* FuriHal,BleGlue: move to new critical section

* Format Sources

* FuriHal: correct flash locking

* FuriHal: replace critical section with interrupt disable in OS routine, minor fixex
2022-03-30 03:37:23 +10:00
SG
bdba15b366
[FL-2393][FL-2381] iButton, OneWire: move to plain C (#1068)
* iButton: getting started on the worker concept
* Hal delay: added global instructions_per_us variable
* iButton: one wire slave
* iButton: ibutton key setter
* iButton: one wire host, use ibutton_hal
* iButton\RFID: common pulse decoder concept
* iButton: cyfral decoder
* iButton: worker thread concept
* iButton: metakom decoder
* iButton: write key through worker
* iButton: worker mode holder
* iButton: worker improvements
* iButton: Cyfral encoder
* iButton: Metakom encoder
* lib: pulse protocol helpers
* iButton: Metakom decoder
* iButton: Cyfral decoder
* iButton worker: separate modes
* iButton: libs documentation
* HAL: iButton gpio modes
* iButton worker: rename modes file
* iButton worker, hal: move to LL
* iButton CLI: worker for reading and emulation commands
* iButton HAL: correct init and emulation sequence
* iButton cli: moved to plain C
* iButton: move to worker, small step to plain C
* Libs, one wire: move to plain C
* Libs: added forgotten files to compilation
* iButton writer: get rid of manual disable/enable irq
2022-03-29 16:01:56 +03:00
gornekich
d15a9500c6
[FL-2388] Fix Mifare Classic exit #1065
Co-authored-by: あく <alleteam@gmail.com>
2022-03-28 16:57:36 +03:00
SG
425a74a001
[FL-2383, FL-2384] iButton, Desktop bug fixes (#1062)
* iButton HAL: correct init and emulation sequence
* FuriHal: cleanup init/deinit routines for emulation timer
* FuriHal: cleanup TIM initialization routines in RFID and SubGhz
* iButton: delay in emulate loop
* Desktop: fix crash caused by invalid animation manager state, described in FL-2384

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-03-28 16:42:31 +03:00
あく
413a03defb
[FL-2375] Migrate to LL part 3 (#1058)
* FuriHal: replace HAL with LL for ARR and CC
* Rfid, FuriHal: migrate emulation to LL
* RFID hal: disable arr preload during emulation
* Rfid, Furi, FuriHal: last piece of LL puzzle
* Rfid, Furi, FuriHal: filing the last piece of LL puzzle
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2022-03-26 01:56:18 +03:00
Nikolay Minaylov
7c4b0f534f
[FL-2379] BadUSB and furi_hal_usb fixes #1057 2022-03-25 19:07:37 +03:00
Nikolay Minaylov
969d1efb6c
[FL-2367] Fix ikey write command hanging #1056
Co-authored-by: あく <alleteam@gmail.com>
2022-03-25 17:54:23 +03:00
SG
76f524d4e9
[FL-2165] Do not allow "write" for keys that do not have write ability. #1055 2022-03-25 14:10:49 +03:00
gornekich
2ba3a9f09a
Fix stream read line (#1054)
* stream: fix stream_read_line return
* nfc: fix keys load

Co-authored-by: あく <alleteam@gmail.com>
2022-03-25 13:43:10 +03:00
あく
1fdc5f2950
[FL-2366] HAL to LL migration part 2 (#1053)
* iButton, FuriHal: add onewire HAL, migrate to LL, add missing critical section guards
* FuriHal: rename onewire to ibutton, cleanup RCC domain usage, fix ibutton and rfid
* FuriHal: cleanup RCC usage
2022-03-25 13:33:01 +03:00
Nikolay Minaylov
3615ffecbe
[FL-2374] USB mode lock, USB stack update (#1051)
* Switch to CMSIS semaphores
* USB stack: HID consumer usage table

Co-authored-by: あく <alleteam@gmail.com>
2022-03-24 20:23:40 +03:00
Nikolay Minaylov
38e92cf789
[FL-2315] USB Mode switch lock (#1036)
* usb mode switch lock
* lock_mutex removed
* Wait for session termination in rpc_cli, lock badusb and u2f if rpc session is opened

Co-authored-by: あく <alleteam@gmail.com>
2022-03-24 18:45:03 +03:00
gornekich
eafeefb843
[FL-1396] Mifare Classic read (#1034)
* rfal: add new data exchange function
* core: add FURI_BIT to common defines
* furi_hal_nfc: add data exchange with custom patiry bits
* lib: extend nfc common API
* assets: add mf classic dictionary
* lib: introduce mifare classic library
* nfc: add dictionary reader helper
* nfc worker: add worker events, add mifare classic read
* nfc: rework scenes with worker events
* nfc: add read mifare classic GUI
* nfc device: add mifare classic save
* nfc: add dictionary open fail scene
* nfc: mention resources
* stream: fix stream read line
* subghz: rework file read with fixed stream_read_line
* furi_hal_nfc: decrease communication timeout
* nfc: rework keys load from dictionary with file_stream
* nfc: add read mifare classic suggestion
* nfc: fix mifare classic read view
* nfc: fix index size
* nfc: add switch to no dictionary found scene
* nfc: add mifare classic load
* nfc: improve read mifare classic design
* mifare_classic: add proxmark3 mention
* nfc: format sources
* nfc: fix typos, add documentation
2022-03-24 01:14:34 +03:00
Nikolay Minaylov
46a894bc5c
[FL-2356] Infrared: Fix opening files outside app folder #1050 2022-03-23 21:51:40 +03:00
あく
c4a0847c99
FuriHal: replace HAL with LL in RFID Part 1. Drop F6. (#1049)
* FuriHal: new speaker HAL
* FuriHal: drop PWM
* FuriHal: move COMP1 to LL
* FuriHal: move COMP1 to LL backport to F6
* FuriHal: remove missing gpio_rfid_carrier from F6
* FurHal: use LL for system controls in flash HAL
* Drop F6 source tree
* Drop F6 from GitHub workflow
* Tie USE_FULL_ASSERT with APP_UNIT_TESTS
* Speaker: return to old volume calculation
* FreeRTOS: move TCB header to glue

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2022-03-23 20:59:20 +03:00
Kevin Wallace
3857cd7d5f
Nfc: add basic Mifare DESFire support (#1024)
* Fix TextBox word wrap behavior
* Wrap width is 120 pixels, not 140. (140 is larger than the screen!)
* Glyph width already includes spacing; don't add 1 additional px
* When starting a new line, include wrapped glyph width in new line_width.
* Call canvas_set_font before text_box_insert_endline so that glyph
  width is calculated using correct font.
  Previous approach worked somewhat well using default TextBoxFontText but
  this version is more robust, particularly when using TextBoxFontHex.
* Add basic Mifare DESFire reading, file/app browser
* Fix build with APP_ARCHIVE=0
* Add bool type to flipper_format
* Add ability to save and load DESFire card data
* Skip over NfcSceneDeviceInfo when viewing saved DESFire info
* mf_df_clear: don't leak master key settings key versions
* When opening a DESFire card from Archive, retain UID emulation behavior
* rm unnecessary \r\n
* show Popup instead of leaving view in bad state
* Move NfcReaderRequestData out of union
  This makes it safe to emulate DESFire/EMV without clobbering card data.
* Display saved DESFire cards via NfcSceneDeviceInfo
* Display and save file metadata even when contents are missing
  This can happen when a file doesn't allow unauthenticated reads (see the
  call to mf_df_parse_read_data_response in nfc_worker.c).

Co-authored-by: Kevin Wallace <git+flipperzero@kevin.wallace.seattle.wa.us>
Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
2022-03-23 16:45:37 +03:00
Nikolay Minaylov
d075e00ae1
BadUSB ID change (#1046)
* badusb: vid/pid/strings change
* demo script update
* removed vid/pid values

Co-authored-by: あく <alleteam@gmail.com>
2022-03-23 16:35:25 +03:00
あく
6470aa8ff9
Gui: refactor text input module and fix debug on MacOS 12.3 (#1045)
* Gui: refactor text input module
* Gui: simplify TextInput input processing
* Gui: simplify TextInput consume flag processing
* Fix debug with gdb broken by MacOS 12.3
2022-03-22 11:03:26 +03:00
MuddledBox
e7dd715289
Keyboard enhance shift (#1042) 2022-03-20 14:25:08 +03:00
Skorpionm
b86a400a82
SubGhz: add frequencies and add DoorHan 315.00 (#1028)
* SubGhz: add frequencies and add DoorHan 315.00
* SubGhz: fix syntax

Co-authored-by: あく <alleteam@gmail.com>
2022-03-17 16:55:53 +07:00
MuddledBox
c098292a53
CLI Enhancement: Added Debug (#1030)
* Initial commit for Debug in CLI

Added Debug as option in CLI

* Update cli_commands.c

Whoops, swapped the printf, now working as expected!

* Fixing Menu Update

Now menu should update

Co-authored-by: SG <who.just.the.doctor@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
2022-03-17 16:49:36 +07:00
あく
eed49bf863
[FL-2335] Gui, Rpc: multisession, asynchronous screen streaming with adaptive frame rate (#1033)
* Gui,Rpc: multisession, asynchronous screen streaming with adaptive frame rate
* Fix compact build, add missing aray initialization.
2022-03-17 16:44:54 +07:00
Skorpionm
94ba7d104c
SubGhz: refactoring add descriptions (#1012)
* SubGhz: add descriptions
* SubGhz: fix syntax

Co-authored-by: あく <alleteam@gmail.com>
2022-03-16 16:18:48 +07:00
あく
28888b0a22
Nfc: add field testing (#1027)
* Nfc: add field cli command
* Nfc: add field test in debug menu
* Nfc: warning message for field tests
* Format sources
2022-03-16 15:57:13 +07:00
Nikolay Minaylov
76b737f411
[FL-2257] RPC Refactoring (#1021)
* rpc: support for multiple sessions
* removed debug prints
* code formatting fix
* compact build fix

Co-authored-by: あく <alleteam@gmail.com>
2022-03-16 15:52:11 +07:00
Nikolay Minaylov
b3ccdf74c8
BadUSB: fix \r\n line endings (#1017)
* fix to support badusb scripts with \r\n line endings
* forgotten todo removed
* get rid of magic numbers

Co-authored-by: あく <alleteam@gmail.com>
2022-03-16 14:31:47 +07:00
MuddledBox
1251c0af83
Removed power 3v3 options (#1022)
* Removed power 3v3 options

Per skotopes, "3.3V: this line is used to power SD-Card it is highly unrecommended to turn this line off(power will be re-enabled to scan sdcard). We will remove this command in future releases."

So I removed it here. No longer an option and should not be possible.

* Added Debug Flag Detect

When debug is enabled, "power 3v3" can be used and is shown in the help for "power" menu. When debug is disabled, will not show up and cannot be executed!

* Update power_cli.c

Co-authored-by: あく <alleteam@gmail.com>
2022-03-16 14:25:07 +07:00
Daniel Tse
e0cebb4c1f
Fixed typo in user message (#1025) 2022-03-16 14:21:14 +07:00
Skorpionm
3164184bbc
[FL-2230] SubGhz: protocol API refactoring (#969)
* SubGhz: protocols library refactoring
* SubGhz: new architecture and refactoring
* SubGhz: simplify protocol structure, remove unused types
* SubGhz: rename Subghz to SubGhz
* SubGhz: add environment concept

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2022-03-03 12:48:56 +03:00
Albert Kharisov
052237f8c9
[FL-2279] IR doxygen, rename irda -> infrared (#1010)
* IR: Doxygen docs, some rename
* Rename irda -> infrared
* Rollback collateral renames

Co-authored-by: あく <alleteam@gmail.com>
2022-02-25 18:22:58 +03:00
SG
c42cce3c6c
[FL-2312] Flipper format: insert OR update (#1009)
* Flipper format: seek_to_end, key_exist
* Flipper Format: insert_or_update
2022-02-25 16:36:29 +03:00
Nikolay Minaylov
da6e31b2bf
[FL-2242] RPC: Wait for session termination in unit tests (#1005)
* rpc: session termination callback
* grammar fixes

Co-authored-by: あく <alleteam@gmail.com>
2022-02-24 15:08:58 +03:00
Albert Kharisov
24987b95cd
[FL-2284] IR: Show universal remote loading (#1004)
* [FL-2131] IR: Show universal remote loading
* Remove unused hal rtc. Gui: cleanup loading module.

Co-authored-by: あく <alleteam@gmail.com>
2022-02-24 14:59:36 +03:00
あく
92734f1bb3
Notification: backlight always on lock. Gpio: backlight always on lock in uart brige app. (#1007) 2022-02-24 03:17:40 +03:00
あく
3c77ae2eb8
Nfc: replace cmsis thread with furi, fix condition race in thread stop routine. (#1003)
* Nfc: replace cmsis thread with furi, fix condition race on thread stop routine.
* Nfc: fix memory leak
* FuriCore, CMSIS: properly handle thread names before scheduler start
2022-02-19 02:38:44 +03:00
Albert Kharisov
ddd909faa0
[FL-2131] IR: continuous signal tx on learn scene (#1002)
Co-authored-by: あく <alleteam@gmail.com>
2022-02-18 23:16:22 +03:00
Skorpionm
3922ae93b7
[FL-2258] SubGhz: removal of frequencies #1001
Co-authored-by: あく <alleteam@gmail.com>
2022-02-18 23:04:39 +03:00
SG
274c12fc56
[FL-2274] Inventing streams and moving FFF to them (#981)
* Streams: string stream
* String stream: updated insert/delete api
* Streams: generic stream interface and string stream implementation
* Streams: helpers for insert and delete_and_insert
* FFF: now compatible with streams
* MinUnit: introduced tests with arguments
* FFF: stream access violation
* Streams: copy data between streams
* Streams: file stream
* FFF: documentation
* FFStream: documentation
* FFF: alloc as file
* MinUnit: support for nested tests
* Streams: changed delete_and_insert, now it returns success flag. Added ability dump stream inner parameters and data to cout.
* FFF: simplified file open function
* Streams: unit tests
* FFF: tests
* Streams: declare cache_size constant as define, to allow variable modified arrays
* FFF: lib moved to a separate folder
* iButton: new FFF
* RFID: new FFF
* Animations: new FFF
* IR: new FFF
* NFC: new FFF
* Flipper file format: delete lib
* U2F: new FFF
* Subghz: new FFF and streams
* Streams: read line
* Streams: split
* FuriCore: implement memset with extra asserts
* FuriCore: implement extra heap asserts without inventing memset
* Scene manager: protected access to the scene id stack with a size check
* NFC worker: dirty fix for issue where hal_nfc was busy on app start
* Furi: update allocator to erase memory on allocation. Replace furi_alloc with malloc.
* FuriCore: cleanup memmgr code.
* Furi HAL: furi_hal_init is split into critical and non-critical parts. The critical part is currently clock and console.
* Memmgr: added ability to track allocations and deallocations through console.
* FFStream: some speedup
* Streams, FF: minor fixes
* Tests: restore
* File stream: a slightly more thread-safe version of file_stream_delete_and_insert

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-02-18 22:53:46 +03:00
Nikolay Minaylov
242241987e
[FL-2256] USB Service (#998)
* usb service, removed power observer
* fix usb restart after disable
* remove usb service from apps
* Applcations: remove dead extern
* New thread naming scheme for drivers
* New thread symbol naming scheme for drivers

Co-authored-by: あく <alleteam@gmail.com>
2022-02-16 20:52:34 +03:00
Albert Kharisov
a37f1d0f6f
[FL-2222] IR: fix font (#1000) 2022-02-16 20:02:22 +03:00
Albert Kharisov
17d6b9f612
[FL-2254] IR: fix hardfault, correct remote loading (#999)
* Bugfix: remove freeing of uninitialized object (IrdaAppSignal).
Therefore rubbish in memory sometimes caused HardFault.
* Fix: slow FFF makes IR-remotes loading take much time,
so we can glimpse previous scene's view while remote is parsing.
Reproducing: remove remote, fast press back (while popup is playing)
and select new remote - previous popup view is displayed.
2022-02-16 19:09:43 +03:00
Albert Kharisov
97c9a2229f
[FL-1461] Update progressbar UI (IR bruteforce) (#997)
Co-authored-by: あく <alleteam@gmail.com>
2022-02-16 14:29:28 +03:00
Albert Kharisov
b8b42d0bef
[FL-2260] IR CLI commands merge (#996)
Co-authored-by: あく <alleteam@gmail.com>
2022-02-16 14:25:23 +03:00
gornekich
7395caa7ce
[FL-2255], [FL-2259] NFC and Input CLI commands refactoring (#995)
* nfc: refactore cli commands
* input: refactore cli commands

Co-authored-by: あく <alleteam@gmail.com>
2022-02-16 14:15:40 +03:00
Albert Kharisov
07036cc0f5
[FL-2222] IR fixes (#994)
* Fix elements_multiline_text_aligned
* IR: fix delete menu
* IR: bold text on delete/saved
* IR: add safe back screen
* IR: don't clear text on rename
* Nfc,Infrared: update DialogEx usage

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-02-16 14:09:47 +03:00
あく
939998a8c8
Release Candidate 0.48.0 Bug Fixes (#991)
* Power: wait a little bit till message displayed on screen when executing power off. FuriCore: do not use bkpt in release builds(causing HardFault when SPI is active).
* Cleanup BSS section: add more consty consts to be more constish.
* Desktop: properly handle autostarted applications.
2022-02-13 22:24:03 +03:00
Albert Kharisov
2c616983cf
Add animations: box, cry, read, hack (#990)
* Add animations: box, cry, read, hack
* Desktop: unload animation if application is already started

Co-authored-by: あく <alleteam@gmail.com>
2022-02-10 22:06:45 +03:00
Albert Kharisov
21ac37a6f6
[FL-2152] New PIN lock (#989)
* [Fl-2152] New PIN Lock, part 1
* Fix errors & leaks, renaming
* Add support to f6
* Fix error, remove duplicate code
* Fix drawing corners of Lock Popup
* FuriHal: insomnia if usb connected
* Applications: cleanup timers use

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-02-10 21:17:41 +03:00
Nikolay Minaylov
2a52d2d620
[FL-2216, FL-2233] Archive fixes (#987)
* archive: badusb, u2f and various fixes
* archive: delete confirmation
* badusb: removed empty string check
* string pointer check
* FuriHal: insomnia overflow assert, fix double insomnia exit in ble. BadUsb: fix uncommitted model.
* view update fixes in gpio, badusb, u2f

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-02-10 16:01:49 +03:00
あく
df2d1ad13f
[FL-2219, FL-2251] System, FuriCore, FuriHal: various bug fixes and improvements (#986)
* Replace irq shenanigans with critical section
* Power: halt system on power off instead of crash.
* Gui: properly handle input event on NULL current_view
* FuriHal: correct gpio configuration sequence
* FuriHal: cleanup uart initialization. Makefile: allow to disable thread support.
* Loader: improve locking, fix simultaneous app start crash, full command line args support for gui apps, more consistent insomnia
* Loader: correct spelling
* FuriHal: increase gpio configuration readability
* FuriHal: correct gpio configuration error when mode is GpioModeEventRiseFall
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2022-02-10 14:20:50 +03:00
gornekich
6b78a8ccfe
[FL-2244] Companion reboot fix (#988)
* bt: don't open rpc session if it is busy
* bq27220: fix incorrect checksum calculation

Co-authored-by: あく <alleteam@gmail.com>
2022-02-09 15:03:27 +03:00
あく
2876499c4f
[FL-2249] Bluetooth: update status bar icon #985 2022-02-09 14:57:44 +03:00
Skorpionm
b71f3c6323
[FL-2168] SubGhz: fix auto highlight name when saving RAW (#984) 2022-02-08 21:41:10 +03:00
gornekich
3f6deecdae
[FL-2243] Restart BT advertising after forgetting devices #982
Co-authored-by: あく <alleteam@gmail.com>
2022-02-07 16:37:56 +03:00
Nikolay Minaylov
40479e1761
u2f: check files before register/login (#980) 2022-02-07 16:34:09 +03:00
gornekich
8cfd0eab9e
[FL-2198], [FL-2161] NFC emulation refactoring (#968)
* rfal: add state changed callback
* furi_hal_nfc: add NFC-A emulation API
* nfc: add emulation logger, refactor scenes
* elements: fix text_box element
* gui: fix text box module
* nfc: remove unnecessary buffers
* nfc: introduce emulation callback concept
* nfc: format sources
* bt settings: fix incorrect scene switch
* bt settings: format sources
* Debug: fix x2d import for python 3
* Gui: rename method name widget_clear to widget_reset
* nfc: add nfca emulation handler
* nfc: add global custom events enum
* nfc: UID emulation Data -> Log
* furi_hal_nfc: fix incorrect timings
* u2f, badusb: widget_clear() -> widget_reset()

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-02-02 22:59:28 +03:00
gornekich
838df4c9ea
[FL-2229] New assets paths (#978)
* assets: change resources paths
* apps: rework nfc, irda and subghz with new assets path
* subghz: remove unused paths
* subghz: fix incorrect path
* badusb and u2f fix

Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: nminaylov <nm29719@gmail.com>
2022-02-02 18:58:52 +03:00
Nikolay Minaylov
d2c4f15af5
[FL-2226] BadUSB, U2F: missing assets error (#979)
* badusb, u2f: showing error screen if assets are missing
* BadUsb: remove dead code
* U2F: remove dead code

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-02-02 17:27:33 +03:00
gornekich
0acea5b25f
bt_settings: fix incorrect switch to forget devices (#977) 2022-02-01 10:43:38 +03:00
Albert Kharisov
9f1a2f2d99
[FL-2237] Fix animation frame order, increase its max size (#976)
* [FL-2237] Fix animation frame order, increase its max size
* Make frame_order variable sized
2022-01-31 16:09:15 +03:00
あく
3cdb59805e
Desktop: fix crash caused by unconsumed back button short press (#974) 2022-01-30 19:45:08 +03:00
あく
2b2a798407
Pre-RC Bug Fixes and Gui lockdown mode. (#973)
* Rfid: fix incorrect StringElement parameters
* Gui, Desktop: add lockdown mode, integrate with desktop.
* Gui: fix runglish in doxy
2022-01-29 14:20:55 +03:00
Nikolay Minaylov
6264ee8c3b
[FL-2212] File validators and archive fixes #972
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-01-29 12:39:10 +03:00
Albert Kharisov
84410c83b5
[FL-2183] [FL-2209] Dolphin Deeds, Level up, assets generation, refactoring (#965)
* Desktop: cleanup headers
* Get loader pubsub via record
* [FL-2183] Dolphin refactoring 2022.01
* Restruct animations assets structure
* Rename assets
* Cleanup headers
* Update Recording animation
* Add BadBattery animation
* Provide loader's pubsub via record
* Fix load/unload animations
* Scripts: add flipper format support, initial dolphin packager rework. Assets: internal and external dolphin.
* Sync internal meta.txt and manifest.txt
* Reorder, rename dolphin assets
* Split essential generated assets
* Add ReadMe for dolphin assets
* Separate essential blocking animations
* Scripts: full dolphin validation before packaging
* Assets, Scripts: dolphin external resources packer
* Github: update codeowners
* Scripts: proper slots handling in dolphin animation meta
* Scripts: correct frames enumeration and fix compiled assets.
* [FL-2209] Add Dolphin Deeds points and many more
* Remove excess frame_rate
* Change dolphin assets directory
* Scripts: add internal resource support to dolphin compiler
* Scripts: add internal assets generation, renaming
* Scripts: correct assert, renaming
* Code cleanup, documentation, fixes
* Update Levelup animations
* Rename essential -> blocking
* Fix Unlocked hint
* Scripts: rewrite Templite compiller, replace regexps with token parser, split block types into code and variable blocks. Update dolphin templates.
* Documentation: add key combos description and use information
* Scripts: cleanup templit, more debug info and add dev comment

Co-authored-by: あく <alleteam@gmail.com>
2022-01-29 12:20:41 +03:00
Skorpionm
53e7415d12
[FL-2215, FL-2168] Display long names and rename RAW files (#971)
* [FL-2215] SubGhz:  fix long names on RAW and Delete screens
* [FL-2168] SubGhz: fix rename RAW
2022-01-27 19:38:47 +03:00
Skorpionm
cb0369a7f3
SubGhz: add protocol Somfy Telis RTS, Somfy Keytis RTS (#964)
* SubGhz: add 433.42 MHz  for Somfy
* SupGhz: add protocol Somfy Telis RTS, Somfy Keytis RTS

Co-authored-by: あく <alleteam@gmail.com>
2022-01-27 15:28:21 +03:00
あく
e804015fea
[FL-2225] About: add serial number to hardware info screen (#970) 2022-01-27 15:21:21 +03:00
gornekich
23ff6723cf
[FL-2204] Bluetooth forget devices (#967)
* bt: update connection parameters
* bt: set correct connection latency and timeout
* gui popup: add clean method
* furi_hal_bt: add connection parameters request, clear database
* bt: add forget bonded devices API
* bt_settings: add forget bonded devices GUI
* bt: rework pin code show with view port to hide view
* bt: support conn parameters for different profiles
* furi_hal_bt: sync f6 target
* target f6: fix build
* bt: format sources
* furi_hal_bt: update connection parameters
* bt: update connection params, fix GUI
* FuriHal: fix spelling
* Refactoring: rename _clean to _reset

Co-authored-by: あく <alleteam@gmail.com>
2022-01-21 20:32:03 +03:00
Nikolay Minaylov
d4787e859e
[FL-1506, FL-2197] Power, USB, LED driver improvements (#966)
* Power, USB, LED driver improvements
* u2f hid descriptor fix
* variable_item_list: value alignment fix
* InputTypeRepeat handling in menu/submenu/var_item_list
* lp5562: fix bugs on 400khz i2c
* Scripts: lint in parallel.
* FuriHal: rename some USB structure to match naming convention. Drivers: update magic values in LP5562.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-01-21 19:55:44 +03:00
Skorpionm
d4d87aa6a8
[FL-2045] SubGhz: new protocol (GSN , Beninca/Allmatic, Elmes) and validator (#958)
* SubGhz: add new method of obtaining a manufactory code subghz_protocol_keeloq_common_magic_xor_type1_learning
* TextInput: checking for a lock on a file with the same name
* TextInput:  fix checking for a lock on a file with the same name
* Assets: rename and recompile
* TextInput: added picture and timer to turn off blob
* TextInput: Fix graphics
* TextInput:  fix validator
* Validators: Add validator is file
* TextInput: fix callback validator_is_file_alloc
* SubGhz: add propocol GNS (dimamic), Beninca/Alcatic,  Elmes
* SubGhz: fix function description
* Gui: correct timer routine on deallocation
* Format sources

Co-authored-by: あく <alleteam@gmail.com>
2022-01-21 16:55:09 +03:00
Albert Kharisov
8f8aba2a34
[FL-2203] Fix CLI RPC stall (#961)
* [FL-2203] Fix CLI RPC stall
2022-01-14 17:09:43 +03:00
Albert Kharisov
17d0d19348
[FL-2116] RPC: stop session on decode error (#959)
* [FL-2116] RPC: stop session on decode error
* Rollback protobuf
* Send only DECODE_ERR, fix session tests
* Tests: replace asserts with checks. Fix broken production build

Co-authored-by: あく <alleteam@gmail.com>
2022-01-14 12:58:26 +03:00
Nikolay Minaylov
a3aaf50ecd
[FL-2084] I2C memory read/write (#951)
* furi_hal_i2c: read/write registers
* remove i2c_acqure/release
* i2c_is_device_ready without reading data

Co-authored-by: あく <alleteam@gmail.com>
2022-01-12 18:29:28 +03:00
gornekich
407f68c08a
[FL-2182] NFC-V UID show fix (#955)
* nfc: rework static inline functions
* nfc: show uid for NFC-B,F,V
2022-01-12 17:02:20 +03:00
Albert Kharisov
a0c16e8a19
Add protobuf versioning (#954)
* Add protobuf versioning
* Add protobuf version unit test
* Change pb version providing
* Remove redundant 'call'
2022-01-12 16:12:40 +03:00
gornekich
1d31000516
iButton fix data layout (#953)
* ibutton: fix info and delete scenes layout
* loader: fix incorrect heap allocation memory calc
* ibutton: cleanup
2022-01-11 20:45:49 +03:00
Albert Kharisov
9ade2349ad
[FL-2188] Fix Desktop crush: stub dolphin stats (#950)
* Fix Desktop crush: stub dolphin stats

Fix Desktop crash on butthurt > 11, so hardcoded animations
are always available. Stub good dolphin stats till
correct deeds management implemented.

* Update ReadMe to match real project structure.

Co-authored-by: あく <alleteam@gmail.com>
2022-01-10 22:46:20 +03:00
Albert Kharisov
990a065bd0
[FL-1929, FL-2164] IR App migrate to FFF (#949)
* IR app move to FFF
* [FL-2164] Hide unimplemented submenus
* Fix brute force fail
* Fix FFF endless reading
* Reformat TV bruteforce lib to FFF
* fixes & cleanup
* Infrared: switch to constexpr.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-01-10 20:13:41 +03:00
あく
389ff92cc1
Naming and coding style convention, new linter tool. (#945)
* Makefile, Scripts: new linter
* About: remove ID from IC
* Firmware: remove double define for DIVC/DIVR
* Scripts: check folder names too. Docker: replace syntax check with make lint.
* Reformat Sources and Migrate to new file naming convention
* Docker: symlink clang-format-12 to clang-format
* Add coding style guide
2022-01-05 19:10:18 +03:00
gornekich
c98e54da10
[FL-1849] NFC and iButton gui fixes (#943)
* nfc: fix spaces between lines in delete and info scenes
* gui widget: add extern c
* ibutton: rework gui in info and delete scenes
* Loader, Desktop: fix debug apps and plugins start from cli, fix deadlock in archive

Co-authored-by: あく <alleteam@gmail.com>
2022-01-03 03:01:54 +03:00
Nikolay Minaylov
7e2f0fcc22
[FL-2121] U2F GUI (#942)
* U2F: new gui
* U2F: user cert key encryption
* FuriCore: move type casting to dangerous_defines
* FuriCore: exclude dangerous things from furi.h

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-01-03 02:33:28 +03:00
gornekich
2cbf99e15a
[FL-2019] Battery test application (#940)
* Power: rework API
* Applications: introduce battery test application
* Power: fix typo
* Desktop: cleanup merge artifacts

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-01-03 01:52:45 +03:00
gornekich
7522b111c2
[FL-1220] BLE scan MAC addresses test (#939)
* bt: refactore cli commands
* bt: add radio stack control, add scan mac addresses
* bt: refactore with new furi-hal-bt API
* bt: f6 targer sync
* bt: code cleanup, update documentation
* Bt: new command names, proper radio stack handling

Co-authored-by: あく <alleteam@gmail.com>
2022-01-03 01:36:42 +03:00
Albert Kharisov
a39002ce22
[FL-2150] Dolphin animation refactoring (#938)
* Dolphin Animation Refactoring, part 1
* Remove animations from desktop
* Remove excess, first start
* Split animation_manager with callbacks
* allocate view inside animation_view
* Work on ViewComposed
* Draw white rectangles under bubble corners
* Fix bubbles sequence
* RPC: remove obsolete include "status.pb.h"
* Add animations manifest decoding
* Flipper file: add strict mode
* FFF: Animation structures parsing
* Assembling structure of animation
* Lot of view fixes:
  Add multi-line bubbles
  Add support for passive bubbles (frame_order values starts from passive now)
  Add hard-coded delay (active_shift) for active state enabling
  Fix active state handling
  Fix leaks
  Fix parsing uncorrect bubble_animation meta file
  Fix bubble rules of showing
* Animation load/unload & view freeze/unfreeze
* Blocking & system animations, fixes:
  View correct activation
  Refactoring + blocking animation
  Freeze first passive/active frames
  Many insert/eject SD tests fixes
  Add system animations
  Add Loader events app started/finished
  Add system no_sd animation
* Assets: dolphin packer. Scripts: minor refactoring.
* Desktop: update logging tags. Scripts: add metadata to dolphin bundling process, extra sorting for fs traversing. Make: phony assets rules.
* Github: rebuild assets on build
* Docker: add missing dependencies for assets compilation
* Docker: fix run command syntax
* ReadMe: update naming rules with link to source
* Assets: recompile icons
* Loader: add loader event
* Desktop, Gui, Furi Core: const shenanigans macros

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2022-01-03 00:39:56 +03:00
Nikolay Minaylov
1202f9b82d
[FL-2159] BadUSB alt codes (#935)
* badusb: alt code commands
* badusb: demo script update
* usb hid: consumer control descriptor
* BadUsb: remove dangerous type casting, rename variable to match codding style guide

Co-authored-by: あく <alleteam@gmail.com>
2022-01-02 20:34:39 +03:00
Albert Kharisov
5b1f50e63a
Much better crash handling. So wow.
* Furi, FuriHal, Desktop: much better crash handling. So wow.
* FuriHal: add missing include in FreeRTOSConfig.h

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-12-31 20:32:49 +03:00
Anna Prosvetova
475fa91ba6
☦️ Rpc: implement SystemPlayAudiovisualAlert (#937)
* Rpc: update protobuf sources
* Notification: allow user settings override
* Notification: add audiovisual alert sequence
* Rpc: implement SystemPlayAudiovisualAlert
2021-12-28 18:46:08 +03:00
あく
5252b207c8
SubGhz: replace incorrect frequency value (#933) 2021-12-26 18:31:48 +03:00
Skorpionm
fb7cc1dd60
[FL-2162] SubGhz: Cli refactoring (#926)
* [FL-2162] SubGhz: Cli refactoring
* SubGhz: power reduction for Australia
* SubGhz: add frequencies for testing the Japanese region
* Desktop: fix fav app

Co-authored-by: Anna Prosvetova <anna@prosvetova.me>
Co-authored-by: あく <alleteam@gmail.com>
2021-12-25 16:19:30 +03:00
Nikolay Minaylov
f061b937d0
[FL-2133, FL-2151] charging icon, fix gui buttons size (#925)
Co-authored-by: あく <alleteam@gmail.com>
2021-12-24 23:00:45 +03:00
Anna Prosvetova
f6d4e8fa84
CI: conditional compact build (#930)
* CI: conditional compact build
* Rpc: fix log line ending
2021-12-24 22:35:25 +03:00
Anna Prosvetova
46a25c295c
Decouple apps to allow smaller builds. Loader deadlock fix and refactoring. (#929)
* Lib: always include rfal
* Gui: remove screen_stream
* Input: decouple from Cli
* Loader: decouple from Cli
* Desktop: ignore missing favorite app, decouple from Archive
* Make: make Notification a Gui dependency
* Make: embed debugging information into elfs
* Loader: hide Plugins submenu when plugins ga arimasen
* Applications: update on start hook usage
* Loader: fix dead lock on menu rebuild with open rpc, new cli command.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-12-24 21:47:48 +03:00
あく
7cea359be8
Storage: lfs config fingerprinting. RTC: fix data collision in lock register, refactor and cleanup. (#928) 2021-12-24 17:33:58 +03:00
Nikolay Minaylov
9e62f08e4d
[FL-1958] U2F prototype (#879)
* U2F implementation prototype
* U2F data encryption and store, user confirmation request
* remove debug prints
* fix notification bug in chrome
* split u2f_alloc into u2f_init and u2f_alloc
* typo fix, furi-hal-trng -> furi-hal-random
* rand/srand redefinition
* SubGhz: a little bit of Dante.
* u2f_data naming fix

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-12-22 23:04:08 +03:00
Skorpionm
9b62b557b4
SubGhz: fix transmission frequency (#922) 2021-12-22 22:35:53 +03:00
Skorpionm
3a86da5526
[FL-2139] SubGhz: refactoring GUI SubGhz (#910)
* SubGhz: refactoring GUI ReadRAW
* SubGhz: replacing memcpy with strcpy
* SubGhz: fix button name "Mode",  fix delete scene, fix show name when loading a key
* SubGhz: refactoring GUI SubGhz
* scene_manager: add exit from last scene API
* subghz: stop scene manager before stopping view dispatcher

Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
2021-12-22 16:01:20 +03:00
Skorpionm
51aa169c3b
[FL-2149] SubGhz: Additional frequencies for testing (#920)
* SubGhz: add new frequency for testing
* [FL-2149] SubGhz: power reduction for Australia

Co-authored-by: あく <alleteam@gmail.com>
2021-12-22 14:05:14 +03:00
Albert Kharisov
cdfc420ddf
Replace Laptop animation text (#919)
* Fix Laptop animation bubble
* Correct new animation select
2021-12-21 17:10:34 +03:00
Albert Kharisov
b4a49cdb30
[FL-2148] Infrared - fast erase when rename (#914)
Erase whole string during renaming remote/button in Infrared app

Co-authored-by: あく <alleteam@gmail.com>
2021-12-21 15:53:57 +03:00
Nikolay Minaylov
51b823d1ca
[FL-2115][FL-2122] BadUSB demo scripts (#915)
* BadUSB: support for dual-modifier key commands, demo script for windows
* BadUSB: ALT-GUI command, demo script for macOS

Co-authored-by: あく <alleteam@gmail.com>
2021-12-21 15:49:57 +03:00
gornekich
b0f582df99
[FL-1972], [FL-1920] Mifare Ultralight and NTAG separation (#918)
* nfc: rename read mifare ultralight menu
* nfc: separate ntag and mifare ultralight
* nfc: save Mifare Ultralight type
* nfc: add valid ack and nack messages
* nfc: add compatible write command implementation
* nfc: support f6 target
2021-12-21 15:33:17 +03:00
あく
439fb9c18d
[FL-1910, FL-2146] Update to new FreeRTOS, fix CMSIS thread flags collision with stream buffer. New cube. (#917)
* Libs: add FreeRTOS submodule. FuriHal: replace ST provided FreeRTOS with original one. FuriHal: for cmsis os hal and patch it for better compatibility with stream buffer.
* Makefile: fix svd plugin on blackmagic
* Lib: update STM32CubeWB package. Project: update project to match new cube package.
* Lib: properly rebase and upload STM32CubeWB
* BleGlue: switch ack logging level to trace
2021-12-21 15:16:25 +03:00
Vlad Roskov
26b2d07dd6
Round up the charge % when drawing battery icon (#912)
Causes anxious urge to recharge otherwise
2021-12-18 14:11:18 +03:00
gornekich
93871f9425
BT hid navigation fix (#911)
* bt: fix bt hid navigation
* Cli: change datetime format to more ISO-ish, add datetime validation.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-12-17 16:24:37 +03:00
Anna Prosvetova
4013da5b59
Rpc: implement SystemGetDateTime, SystemSetDateTime, update GuiStartVirtualDisplay (#908)
* Rpc: update protobuf sources
* Rpc: implement SystemGetDateTime, SystemSetDateTime
* Rpc: add first frame parameter to GuiStartVirtualDisplay
2021-12-16 18:41:55 +03:00
gornekich
36089c7472
Change NFC log messaged level (#906)
* nfc: change nfc worker log messaged to debug level
* FuriHal: switch logging level to trace in nfc

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-12-15 22:07:37 +03:00
ghettorce
de006aa06a
NFC: fixes & improvements (#897)
* nfc: (mf_ul) fix overflow while reading
* nfc: (mf_ul) fix FAST_READ command emulation
* nfc: (mf_ul) implement non-strict PWD_AUTH command emulation for NTAG21x
* nfc: (mf_ul) improve emulation stability by removing frequent furi_hal_console_put() calls that cause delays or something
* nfc: (mf_ul) remove calls to blocking functions from emulation worker

Co-authored-by: あく <alleteam@gmail.com>
2021-12-15 21:27:25 +03:00
gornekich
f0d4584b40
[FL-2119] BT HID App (#888)
* view_dispatcher: add default back processing for Long events
* assets: add ble connected and disconnected assets
* bt keyboard: introduce new application
* bt keyboard: add logic to keyboard mode
* bt: remove debug ble hid application
* bt hid: introduce media controller
* gui canvas: rename CanvasFontDirection -> CanvasDirection
* gui canvas: add arrow element
* assets: update finilized assets
* bt hid: finalise keynote GUI
* bt hid: finalise media player GUI
* bt: add media key buttons support
* bt: add exit confirm view
* bt: change Clicker -> Remote
* bt: support f6 target
* bt: hopefully final bt hid design
* bt hid: add blue led notification when device is connected
* bt: leave only bt clicker for now
* bt: add display notification on pin code show event
2021-12-15 20:39:06 +03:00
あく
63642617ee
Hide debug tools if debug is not enabled. Application: update debug tools code base. SubGhz: log duty cycle. (#903)
* Application: clean debug_tools code base.
* SubGhz: add duty cycle logging.
* Application: hide debug tools if not enabled. Gui: move icon_animation allocation to menu module.
2021-12-15 15:23:16 +03:00
あく
6579368053
[FL-1818] System setting and debug options. RTC HAL refactoring. (#902)
* FuriHal: RTC API refactoring. System Setting application. FuriCore: adjustable log levels. Minor code cleanup.
* Storage: change logging levels for internal storage.
* FuriCore: fix broken trace logging level
2021-12-15 01:39:59 +03:00
Albert Kharisov
965067b5bd
[FL-2132] IRDA: fix crush in Saved Remote (OK + back) (#894)
Pressing Back button before releasing OK on Saved Remote scene
freezes application, because it doesn't expect that button is
pressed when leaving Saved Remote scene.

Issue: 893
2021-12-14 02:52:13 +03:00
Skorpionm
1232defcf1
[FL-2129] SubGhz: Fix Duty cycle at 433/868 (#892)
* [FL-2129] SubGhz: Fix Duty cycle at 433/868
* SubGhz: fix syntax
* SubGhz: increased silence time in the 868 range
* SubGhz: added build flag LAB_TESTS
* SubGhz: better LAB_TESTS flag handling
* NFC: LAB_TESTS flag handling

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-12-13 15:21:37 +03:00
SG
58ce937321
[FL-1891] Release 0.42 bugfixes (#891)
* Fixed the "ibutton can only emulate after reading" bug
* Fixed previous fix. FIXES FOR THE FIX GOD! BUGS FOR THE BUG THRONE!
* Fixed "Repeat code" position on code input screen
* Changed CAME protocol icon
* Brewfile: add imagemagick missing assets compiler dependency
* Correct fix for "Repeat code" position on code input screen

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-12-12 14:03:39 +03:00
Anna Prosvetova
195f422bb9
Rpc: implement SystemFactoryReset (#890)
* Rpc: update protobuf sources
* Rpc: implement SystemFactoryReset
2021-12-10 14:51:36 +03:00
SG
d6f080f7d0
[FL-2125] Cli: input_dump (#887)
* Cli: input_dump
* Tied together input_dump and input service
* input_dump and input service are now very tightly tied
* Input: remove record open in input_dump.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-12-09 19:53:29 +03:00
Skorpionm
9f28338d9e
[FL-2100] SubGhz: GUI download and transfer RAW file (#881)
* SubGhz: fix exit subghz_chat
* SubGhz: refactoring GUI RAW

Co-authored-by: あく <alleteam@gmail.com>
2021-12-08 18:00:54 +03:00
tonyfreeman
c6cb6ae810
BLE: Increase mtu (#837)
* Incease mtu & buffer size
* bt: process mtu size in RPC callbacks

Co-authored-by: Tony Freeman <tonyfreeman@users.noreply.github.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
2021-12-08 16:59:40 +03:00
Skorpionm
f0aed7e583
SubGhz: add GFSK modulation, refactoring subghz_chat (#866)
* SubGhz: add GFSK modulation, refactoring subghz_chat
* SubGhz: off echo subghz_chat
* SubGhz: subghz_chat add sending and receiving formatted text, translation of the chat to events
* SubGhz: add UTF support in subghz_chat_worker_alloc

Co-authored-by: あく <alleteam@gmail.com>
2021-12-08 16:42:01 +03:00
gornekich
7170864fe4
[FL-1976] BLE HID (#852)
* ble: prototype ble hid
* ble: add HID service and characteristics
* debug tools: add ble keyboard app
* ble: change appearance
* ble: working keyboard
* bt: introduce furi-hal-bt-hid
* bt: restart hid service on each keyboard app enter
* bt: introduce switch profile
* bt: add profile to ble glue
* bt: working profile switch
* bt: introduce bt serial profile, rework API
* bt: rewotk HID profile
* bt: rework gap with profile configuration
* bt: move change profile routine to furi hal bt
* bt: change switch profile API to blocking
* bt: move battery update to furi hal bt
* bt: cleanup
* bt: add support for f6 target
* bt: update documentation
* bt: clean up code
* bt: remove NO OUTPUT setting
* bt: set numeric comparison pairing in BLE HID
* bt: support f6 target
* bt: set mac address in profile configuration
* bt: set advertise name in profile config
* bt: rework with furi thread
* bt: support f6 target
* bt: clear hci command buffer on core2 restart
* bt: correct thread kill sequence
* bt: fix freertos functions calls
* bt: add some enterprise delays fo correct memory free
* bt: code cleanup
* bt: change terminate -> stop
* bt: fix memory leakage

Co-authored-by: あく <alleteam@gmail.com>
2021-12-08 14:28:01 +03:00
Anna Prosvetova
03d7476e4f
Rpc: StorageInfo, StorageRename, SystemReboot, SystemDeviceInfo (bonus: +FuriHalInfo) (#862)
* Rpc: update protobuf sources
* Rpc: rename Status to System
* Rpc: implement StorageInfoRequest
* Rpc: implement StorageRenameRequest
* Rpc: implement SystemRebootRequest
* FuriHal: introduce FuriHalInfo, refactor device_info
* Rpc: implement DeviceInfoRequest
* Rpc: use strdup where it suites the best.
* Make: add do not page align data to linker flag.

Co-authored-by: あく <alleteam@gmail.com>
2021-12-07 16:47:20 +03:00
Albert Kharisov
604d80aed4
[FL-2083] Bring Passport back (#868)
* [FL-2083] Bring Passport back
* Move Passport to Settings
* Hide icounter editing

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-12-07 16:13:07 +03:00
Albert Kharisov
185647a09a
Play only basic good animations (#872)
* New Basic Animations
* Keep only basic calm animations

Co-authored-by: あく <alleteam@gmail.com>
2021-12-07 16:02:19 +03:00
SG
e09009e497
LFRFID-debug: proxy comparator to gpio (#876) 2021-12-07 15:49:44 +03:00
あく
98bc190ac4
Hackathone session: bugfixes and documentation update (#869)
* ReadMe: update flashing scripts section
* Furi: add record exists method to record store.
* FuriHal: early OS init and i2c timeouts based on os ticks.
* Storage: replace malloc with furi_alloc, fix errors found by pvs.
* iButton: properly handle shutdown in cli search command
* SubGhz: proper argument type in sscanf and incorrect position of logging in switch.
2021-12-05 14:47:02 +03:00
Lesha Lomalkin
4b8653e061
Subghz chat: add vibration on input message, send joined/left events … (#863)
* SubGhz: add vibration on input chat message, send joined/left events to room on start and exit app.
* SubGhz: optimize notification api usage

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-12-04 16:40:17 +03:00
Oleg Kalachev
c2c17c761e
Fix address in I2C scanner (#865) 2021-12-04 16:21:58 +03:00
Skorpionm
fbd05598ad
[FL-2086] SubGhz: Fix Errors (#861)
* CLI: fix main GUI freeze while subghz chat is running
* CLI: fix processing backspace in the web console
* [FL-2086] SubGhz: fix can't save signals in sub'e to internal memory
* Cli: remove warning message in i2c command

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-12-02 14:19:47 +03:00
あく
0b0629e6fe
Cli: add I2C scanning command (#860)
* Cli: add I2C scanning command

* Cli: proper scanning limits in i2c command

* Cli: better output readability on i2c scan
2021-12-02 02:21:57 +03:00
あく
41b5d5f5c9
Gui: fix random crashes under load in icon_animation (#859) 2021-12-02 01:13:21 +03:00
Skorpionm
b912cc7991
SubGhz: sending / receiving messages via subghz (#851)
* SubGhz: add worker subghz_txrx
* SubGhz: added support for transferring Russian characters and support for backspace in CLI subghz_txrx
* SubGhz: refactoring subghz_txrx_worker, added a callback for accepting data in an empty one RX buffer
* SubGhz: fix conflict
* SubGhz: fix syntax errors
* Cli: document string_move usage and its behavior
* FuriHal: update subghz api and documentation. Subghz: move chat to subghz cli subcommand.
* Subghz: update text in chat cli

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-12-01 18:44:39 +03:00
Albert Kharisov
d86125c7f7
Fix butthurt and battery (#850)
* Fix butthurt and battery
2021-11-29 15:51:15 +03:00
あく
cf591ef7eb
[FL-1911] FuriHal: i2c refactoring (#847)
* Project: fix release build, replace asserts with checks.
* FuriHal: i2c refactoring, new bus access model, flexible bus gpio configuration.
* FuriHal: set i2c pins to high on detach.
* FuriHal: more i2c bus events, put bus under reset when not used, move bus enable/disable routine to bus handler.
* FuriHal: fix i2c deadlock in power api, add external i2c handle.
2021-11-28 21:28:19 +03:00
Skorpionm
7c0943e736
SubGhz: fix GUI ReadRAW and add new man (#843)
* Notification: add sequence_single_vibro
* SubGhz: optimizing the performance of the GUI ReadRAW
* SubGhz: full highlighting of the default filename on save
* SubGhz: add man Leopard, Faraon, Reff, ZX-750, Back_SL-B9, fix syntax

Co-authored-by: あく <alleteam@gmail.com>
2021-11-26 17:01:03 +03:00
Nikolay Minaylov
f52e9fc578
[FL-2051] BadUSB: new GUI (#844)
* [FL-2051] BadUsb: new GUI
* add missing assets
* skip empty lines and leading spaces
* SubGhz: add alignment check to keystore mess with iv routine

Co-authored-by: あく <alleteam@gmail.com>
2021-11-26 16:53:51 +03:00
Albert Kharisov
3ab9112c21
Fix out of screen drawings (#842)
* Fix lock screen menu
* Fix pin setup in lock menu
* Desktop GUI layer on FS, black status bar
* Desktop: fix spelling
* Fix first start screen
* Fix status bar drawing

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-11-26 15:19:30 +03:00
あく
2db5eee03b
Gui: define status bar workarea, remove unused icon. (#841)
* Gui: define status bar workarea, remove unused icon.

* Format Sources
2021-11-24 21:19:34 +03:00
Albert Kharisov
9b8a139e2b
[FL-1995] New dolphin animations (part 1) (#835)
* Desktop Animation (part 1): Ugly naked ohmygod architecture
* fix butthurt, fix locked scene
* Change SD icons, fixes
* Fix level update animation
* Fixes, correct butthurt
* Clean up code
* furi_assert(0) -> furi_crash("msg")
* Gui: rename none layer to desktop, update docs.

Co-authored-by: あく <alleteam@gmail.com>
2021-11-24 19:21:12 +03:00
gornekich
92c499b41b
[FL-2049] Reset submenu index on exit #840
Co-authored-by: あく <alleteam@gmail.com>
2021-11-24 17:05:23 +03:00
Skorpionm
a13f87fedb
[FL-2047] SubGhz: New GUI ReadRAW view (#832)
* SubGhz: GUI RAW Read view
* SubGhz:  GUI Read RAW refactoring
* SubGhz: fix bug wrong frequency of the allowed transmission
* GUI Read RAW refactoring
* SubGhz: fix set the default frequency
* SubGhz: fix save filename when returning from another menu
* SubGhz: fix Send and Back button behavior

Co-authored-by: あく <alleteam@gmail.com>
2021-11-24 16:59:45 +03:00
Oleg Schwann
68274b6c27
Add Snake game (#829)
* Add snake game
* Applications: Added a classic game https://en.wikipedia.org/wiki/Snake_(video_game_genre)
* Snake Game: Making it impossible to lose button presses
* Use more native press button event
* Snake Game: use low level InputTypePress event instead of InputTypeShort high level unpredictable event

Co-authored-by: LionZXY <nikita@kulikof.ru>
Co-authored-by: あく <alleteam@gmail.com>
2021-11-23 19:07:46 +03:00
tonyfreeman
e54e4a6d77
RPC: Add data field to ping request & response (#836)
* Update protobuf
* Send ping data back
* Add check for has_next, more readability
* Fix nullptr dereference

Co-authored-by: Tony Freeman <tonyfreeman@users.noreply.github.com>
Co-authored-by: Albert Kharisov <albkharisov@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
2021-11-23 11:30:54 +03:00
Oleg Schwann
949079cb74
All strange time constants are now frequency multipliers (#834) 2021-11-22 21:49:57 +03:00
Nikolay Minaylov
efded63bcb
USB-UART: New GUI (#826)
* USB-UART: new gui
* Furi: use furi_console for logging instead of printf.
* CDC: calling open/close callbacks on interface change
* fix vcp_tx block on disconnect
* USB mode set by struct pointer
* FuriHal: proper event sequence on vcp reconnect
* disable debug prints
* HAL: add context to UART IRQ's
* Context usage in UART IRQ and CDC callbacks
* USB-UART: geting rid of baudrate limitations
* FuriHal: remove struct pollutant in usb api.

Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-11-21 18:17:43 +03:00
gornekich
a5052a0375
[FL-2053] BLE MTU processing #830
Co-authored-by: あく <alleteam@gmail.com>
2021-11-21 17:47:54 +03:00
SG
013ed64cbb
UART echo app (#831)
* HAL: add context to UART IRQ's
* Apps: uart echo/log application
* Sync api
* Another api sync
2021-11-20 01:19:31 +03:00
gornekich
cc044c5033
Fix incorrect RPC session termination on BLE disconnect #828 2021-11-17 21:15:58 +03:00
あく
65e6ab5b8b
[FL-2017] Gui: correct empty folder handling in file_select. #824 2021-11-16 17:10:06 +03:00
SG
4cb986b534
[FL-1904] LFRFID: dedicated reading modes (#823)
* LFRFID: dedicated reading modes
* LFRFID: normal and indala mode
2021-11-16 11:47:49 +03:00
あく
b3d8f0b950
[FL-2038] Power off and auto power off on first start screen (#821)
* Power: change power_off signature to match implementation

* Desktop: auto power off on first start screen and with ok button.

Co-authored-by: SG <who.just.the.doctor@gmail.com>
2021-11-16 03:12:30 +03:00
あく
516a437305
Storage: move factory reset to the place it belongs, add gui version. (#822) 2021-11-16 03:04:33 +03:00
あく
1571d4ec54
Project: enum cast fix. Makefile: blackmagic rule in global makefile (#819) 2021-11-15 22:55:25 +03:00
あく
2e46ec36a7
Lib: update m-lib to latest release. Update m-lib usage across project. (#818) 2021-11-15 20:09:40 +03:00
あく
70d0519178
Subghz: fix crash on arg free (#815) 2021-11-12 18:45:51 +03:00
Anna Prosvetova
558fa5670b
RPC: Add Virtual Display & Unify log tags (#814)
* RPC: Update protobuf sources
* RPC: Add Virtual Display
* Unify log tags
* RPC: Virtual Display placeholder
* Rpc: clear frame buffer callback before confirm.
* Firmware: full assert for hal, move fatfs initialization to furi hal.
* FuriHal: VCP optimizations, thread safe console. Rpc: adjust buffer sizes.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-11-12 16:04:35 +03:00
Nikolay Minaylov
b564e8eb38
[FL-2010] furi-hal-vcp rework (#812)
* [FL-2010] furi-hal-vcp rework
* Fix connect state change on vcp enable
* New thread naming scheme and stack size adjustment.
* Applications: rename worker threads to match new naming scheme.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-11-11 19:17:50 +03:00
Skorpionm
ac8b1457f2
[FL-1931, FL-2005] SubGhz: migration in flipper file format (#807)
* SubGhz: add save key in flipper file format
* [FL-2005] SubGhz: fix stored signals cannot be deleted
* SubGhz: add load key in flipper file format
* SubGhz: fix syntax
* SubGhz: fix bad file upload
* Storage: add function to get the next free filename
* SubGhz: add save RAW  in flipper file format
* SubGhz: add load RAW in flipper file format
* SubGhz: refactoring protocol
* SubGhz: refactoring scene
* SubGhz: fix SubGhzNotificationState define
* Makefile: proper comapre for FORCE

Co-authored-by: あく <alleteam@gmail.com>
2021-11-11 15:49:19 +03:00
あく
5209701add
[FL-1991] Rewrite flash driver (#813)
* Toolbox: fix null pointer dereference in manchester decoder.
* FuriHal: use MPU to protect from null pointer dereference, replace flash driver with our own implementation.
2021-11-10 12:53:00 +03:00
gornekich
90d450368c
[FL-1919] NFC rework with Flipper File Format (#756)
* nfc: allocate nfc device on heap
* nfc: rework save with flipper file format
* nfc: rework nfc device load with flipper file
* nfc: save AID length and data
* nfc: remove file worker usage
* nfc: format sources
* nfc: rework with flipper file format addons
* assets: update EMV resources with flipper file format
* nfc: rework EMV resources parsing with new file format
* assets: fix EMV AID file format
* nfc: fix nfc_device usage

Co-authored-by: あく <alleteam@gmail.com>
2021-11-09 00:55:06 +03:00
gornekich
54dc16134d
[FL-1922] BLE buffer overflow (#789)
* rpc: increase RPC buffer size. Add get available buffer size API
* bt: add flow control characteristic to serial service
* ble: change updating flow control characteristic logic
* rpc: add buffer is empty callback
* bt: add notification about empty RPC buffer
* ble: add more debug info
* serial_service: add mutex guarding available buffer size
* ble: remove debug logs in serial service
2021-11-08 22:41:40 +03:00
coreglitch
4e9e9f32d7
Use NFC device format when NFC app runs with args #810 2021-11-05 15:38:59 +03:00
Nikolay Minaylov
f8d3cc251c
[FL-1984, FL-2004, FL-2010] USB CDC Fixes (#801)
* [FL-1984, FL-2004] USB-UART Fixes, test with high timer task priority
* added forgotten file
* switch from EventFlags to ThreadFlags
* [FL-1984, FL-2010] USB-UART and furi-hal-vcp rework
* Scripts: modernize string formatting.

Co-authored-by: あく <alleteam@gmail.com>
2021-11-04 22:33:28 +03:00
gornekich
3225f40870
[FL-1952] BLE bonding fix (#805)
* furi-hal-bt: add mutex guarding core2 state
* ble-glue: configure ble keys storage in SRAM2
* bt: add load and save ble keys in internal storage
* bt: improve work furi_hal_bt API
* bt: rework app_entry -> ble_glue
* bt: apply changes for f6 target
* desktop: remove furi check
* ble-glue: comment NVM in SRAM2 configuration
* FuriHal: fix flash controller state corruption, fix incorrect semaphore release, implement C1-C2 flash controller access according to spec. Gui: change logging level.
* Libs: better lfs integration with lfs_config.
* Ble: switch C2 NVM to RAM.
* FuriHalCrypto: ensure that core2 is alive before sending shci commands
* Ble: fix incorrect nvm buffer size

Co-authored-by: あく <alleteam@gmail.com>
2021-11-04 20:26:41 +03:00
SG
bb9c464a13
Storage: internal error getter (#806)
* Storage: internal error getter

Co-authored-by: あく <alleteam@gmail.com>
2021-11-04 13:46:45 +03:00
SG
7f94ef3179
[FL-1926] Flipper File Format addons (#753)
* Flipper file format: remove C wrapper
* Flipper file format: open append, float, uint32_t as array, delete key, value count
* Flipper file format: fix scratchpad location
* Flipper file format: add EOL on append
* SubGHZ keystore: update encryption type read and write
* Flipper File Format: enhanced version
* Flipper File Format: fix naming
* Flipper File Format: fix "open" subset naming
* Flipper File Format: tests
* Flipper File Format: file helper naming
* SubGHZ keystore: merge with current state of flipper file format
* Flipper File Format:  update make recipe
* Flipper File Format: open new file method
2021-11-04 13:06:13 +03:00
Albert Kharisov
0c1bcf144b
[FL-1994] Add Saved Struct (#804)
Co-authored-by: あく <alleteam@gmail.com>
2021-11-03 20:22:49 +03:00
Skorpionm
6d548637f2
SubGhz: reading keys from encrypted files (#803)
* SubGhz: add file with manufactory codes, and the ability to add your own manufactory codes for KeeLog
* SubGhz: add encrypt RAW data, add decrypt and get RAW data
* SubGhz: add encrypt  magic_xor_atomo
* SubGhz: parsing atomo using file encrypt
* SubGhz: fix calculating the size of the read buffer
* SubGhz: parsing Nice FLOR S using file encrypt
* SubGhz: add file encrypt nice_flor_s_tx, fix name load file
* SubGhz: fix checking read buffer size
* Update subghz_keystore.c
* SubGhz: fix calculating the size of the read buffer

Co-authored-by: あく <alleteam@gmail.com>
2021-11-03 19:41:07 +03:00
あく
300302cb7c
Fix gpio debug (#802) 2021-11-02 02:49:48 +03:00
Anna Prosvetova
e9e76e144c
RPC: Implement storage_stat_request (#800)
* RPC: Update protobuf sources
* RPC: Implement storage_stat_request
* RPC: Test storage_stat_request
* FuriRecord: fix use after free in destroy method.
* Furi: refactor PubSub and it's usage. Fix allocation in RPC.
* FuriCore: fix memory leak in pubsub
* FuriCore: update unsubscribe method signature in pubsub, make subscription structure lighter.
* FuriCore: remove dead code

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-11-01 23:35:54 +03:00
Albert Kharisov
63fe452746
[FL-1854] NEC42ext displaying (#796)
* Add correct key-reading asset
* IRDA: correct NEC42ext displaying
* IRDA App: correct vibro

There are no double vibro, but 1 vibro for any successful
new signal read, and 1 for sending just read signal.

Co-authored-by: あく <alleteam@gmail.com>
2021-11-01 19:34:50 +03:00
Anna Prosvetova
86bced5b2c
RPC: Screen streaming & Input injection (#794)
* RPC: Screen stream
* Move callback to rpc_screen, implement graceful stop
* RPC: Implement input injection
* Update protobuf submodule
* Gui: thread safe frame buffer callback setter.
* RPC: Keep gui record open

Co-authored-by: あく <alleteam@gmail.com>
2021-11-01 19:26:37 +03:00
あく
22a4bac448
[FL-1934] Core: wipe memory after free. SubGhz: key encryption tool. (#797)
* Core: wipe memory after free. RFID,iButton: fix iterator use after invalidation.

* Debug: support unix wildcards for register matching in svd, update MCU description file and minify it.

* Toolbox: getter for File in FlipperFile.

* Makefile: conditional flashing

* SubGhz: keeloq_mfcodes encryption tool.

* FuriHal: proper IV handling on CBC in crypto. SubGhz: add support for encrypted keeloq keys. Makefile: move formatting to top Makefile.

* SubGhz: rename some function names to match naming scheme.

* SubGhz: encryption tool, fix windows line endings

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-11-01 16:11:25 +03:00
gornekich
146cd51894
[FL-1497] GUI textbox element and widget (#792)
* canvas: add font parameters
* elements: add text box element
* widget: add text box element
* nfc: rework delete and info scene with text box widget
* gui: update documentation
* gui: fix canvas_get_font_params return

Co-authored-by: あく <alleteam@gmail.com>
2021-10-27 21:55:03 +03:00
Skorpionm
26c53f3dfd
SubGhz: Refactoring Read RAW (#791)
* SubGhz: rename save_raw -> read_raw
* SubGhz: add manually saving files to read_raw, confirming that saving is unnecessary, refactoring
* Format sources
* SubGhz: fix runglish

Co-authored-by: あく <alleteam@gmail.com>
2021-10-27 20:37:11 +03:00
Albert Kharisov
10c65daad7
RPC CLI: Change ParallelSafe cli command (#793)
Starting RPC session is parallel safe.
Launching application command do lock check inside.
2021-10-27 18:20:08 +03:00
Nikolay Minaylov
732b9546fc
[FL-1984] USB-UART improvements and fixes (#785)
* [FL-1984] USB-UART fixes
* FuriHal: fix SOF wait on CDC0
* FuriHal: fixed stuck in UART IRQ with ORE event

Co-authored-by: あく <alleteam@gmail.com>
2021-10-26 21:41:56 +03:00
its your bedtime
fae8d8f23c
[FL-1968] Pin code locking (#788)
* Gui: code input module
* Gui: fix size to fit frame
* Desktop: PIN config and lock option
* Gui: code input: cleanup, offset input fields if no header present
* Desktop: move code unlock to desktop_locked scene
* Desktop: fix unlock with back key
* Desktop: bump settings version
* Desktop: correct scene usage.

Co-authored-by: あく <alleteam@gmail.com>
2021-10-26 21:34:31 +03:00
Albert Kharisov
400d672e81
[FL-1955] CLI RPC (#781)
- RPC: added CLI command to start session - all input bytes goes into RPC, all RPC output goes into VCP
- RPC: added command to close session (actually it only notifies transport layer)
- RPC: added recursive rmdir
- RPC: hard-coded listing for root directory (any, ext, int)
- Fixed CLI leak
- Fixed furi_record_delete leak
- Unit tests: repaired
- Unit tests: corrected output - remove excess, change dots with progress spinner
- Unit tests: added leak check
- Unit tests: SD mount check before start

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-26 19:05:28 +03:00
あく
ae016ce464
[FL-1990] Correct release type in copro manifest and rename boot to bootloader (#787)
* World: rename boot to bootloader.
* Scripts: correct release type in copro bundler.
2021-10-26 15:24:14 +03:00
Skorpionm
9d952ed855
[FL-1913, FL-1963] SubGhz: save raw signal, add came atomo decoder (#783)
* File_Worker: getting the name of a new file with an index
* SubGhz: add decoder RAW protocol
* SubGhz: add view Save RAW
* SubGhz: refactoring subghz custom event
* SubGhz: fix syntax
* SubGhz: fix error build
* SubGhz: test build
* SubGhz: refactoring subghz, add rename, delete, start and emulate RAW signal
* SubGhz: fix triangle glitch in save raw view
* SubGhz: fix receiver config scene
* SubGhz: fix transfer after returning from save scene
* Canvas: add font rotation
* SubGhz: raw protocol encoder
* SubGhz: fix error completion of transfer raw encoder
* SubGhz: increased the speed of reading RAW data from a flash drive, displaying the name of the saved file in the Save RAW scene
* Canvas: fix font rotation
* SubGhz: fix navigation save RAW  scene
* SubGhz: add decode came atomo
* Git: renormalize
* Cleanup sources and enums
* Gui: add font direction to canvas reset, canvas init sequence cleanup.
* SubGhz: reorder menu.
* Gui: correct canvas_set_font_direction signature

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-25 17:37:14 +03:00
Nikolay Minaylov
88cee4601a
[FL-1885] USB-UART bridge (#778)
* [FL-1885] USB-UART: app and worker
* [FL-1885] USB-UART: UART on CDC0

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-21 21:12:20 +03:00
gornekich
c2535f4269
[FL-1937] Bluetooth new assets (#774)
* assets: add new ble assets
* bt: update pairing screen with new icon
* bt: add bt status and update status bar
* bt: update statusbar width from thread
* Icons: new BT icon

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-21 19:27:58 +03:00
gornekich
827d99dde3
[FL-1922] Assets compression (#773)
* lib: add heatshrink compress library
* canvas: new icons format
* scripts: add icons compression to assets generation script
* assets: update assets
* furi-hal: introduce furi-hal-compress
* canvas: rework icon drawing with furi-hal-compress
* lib: rework heatshrink lib for dynamic buffer allocation API
* furi-hal-compress: add encode and decode API
* furi-hal-compress: working decode
* furi-hal-compress: support f6 target
* scripts: format sources
* furi-hal-compress: fix incorrect encoder reset
* furi-hal: add compress initialization to f6 target

Co-authored-by: あく <alleteam@gmail.com>
2021-10-21 17:46:36 +03:00
gornekich
af1fd0c46d
[FL-1920] Fix NTAG emulation (#776)
* mifare ultralight: fix read signature command
* nfc_worker: read signature before pages
2021-10-21 15:46:47 +03:00
あく
2751440193
[FL-1970, FL-1965, FL-1872, FL-1689] Python framework, Scripts and fixes (#779)
* Scripts: add flipper lib, migrate ob to flipper lib, update ob.data
* Makefile: speedup build with phony target for .d files
* FuriHal,U8G2: full MGG display support and ERC contrast tuning.
* Desktop: fix dolphin rename artifact.
* Scripts: port otp.py to flipper scripting lib.
* Scripts: add wipe and core1 flashing to flash.py, remove obsolete shell scripts
* Scripts: replace core1 flashing script with global makefile.
* Scripts: final touches and migration to python. Root Makefile for everything.
2021-10-21 15:24:34 +03:00
あく
4997b56498
DisplayTest: controller fine tuning. Disable u8g2 contrast management. (#772)
* DisplayTest: controller fine tuning. Disable u8g2 contrast management.
* DisplayTest: correct initial configuration values. Targets: cleanup dead code.
* DisplayTest: correct initial value for bias.
2021-10-19 14:42:49 +03:00
あく
f390060922
[FL-1942] Applications: Display Test. u8g2 usage refactoring. #770 2021-10-17 23:34:36 +03:00
Albert Kharisov
98830a8a41
[FL-1956] Fix long packets bug, fix Manchester overrun (#766)
Also fix RC6 test to detect this manchester bug
2021-10-16 15:00:21 +03:00
あく
2255060d52
[FL-1961] Cli: device_info format versioning. Detach target from firmware name. #765 2021-10-16 14:25:32 +03:00
あく
0e14545d48
[FL-1945] Firmware, Scripts, Cli: add OTPv2, alternative displays support and 2-step OTP programming. #764 2021-10-15 14:05:14 +03:00
Skorpionm
63428609b7
SubGhz: fix frequency determination in a frequency analyzer (#762) 2021-10-13 22:35:33 +03:00
あく
06444789bb
Makefile: optimize space usage. (#761) 2021-10-13 20:33:09 +03:00
Nikolay Minaylov
e6642b332c
[FL-1930] USB HID (#751)
* [FL-1930] USB HID keyboard test
* [FL-1930] HID mouse demo app
* [FL-1930] BadUSB: RubberDucky script parser. BadUSB test app

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-13 19:38:24 +03:00
Albert Kharisov
1db29eaea8
[FL-1946] RPC App launch (#758)
* RPC: Add App start, lock status
 - Add RPC commands Application start, lock status acquiring.
 - Write tests for RPC App system.
 - Replace Unit Tests application with CLI command. This is for CI needs and for tests that run application.
* Fix NDEBUG build
* Update PB submodule
* Fix RPC print (ENABLE DEBUG PRINT!)
* snprintf -> string_t
* Fix Hard Fault (early mutex free)
* printf -> string_t, format, enable tests
* Update submodule: protobuf
* Applications: rollback unit test naming scheme.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-13 18:39:37 +03:00
its your bedtime
a643bd14be
Archive: fix bounds crossing logic #760
Co-authored-by: あく <alleteam@gmail.com>
2021-10-13 12:53:58 +03:00
あく
a3b69d8030
[FL-1949] Cli: verify all 10 keys in crypto enclave #759 2021-10-13 12:45:23 +03:00
gornekich
943fb1bced
[FL-1721] Bluetooth refactoring (#747)
* ble-glue: add on connect \ disconnect, on send \ received callbacks
* bt: rework service with furi-hal-bt and callbacks
* bt: update battery level on connect
* ble-glue: set one callback with parameters
* bt: rework callbacks, remove unused API
* ble-glue: remove dead code
* furi-hal-bt: add documentation
* ble-glue: apply changes for f7 target
* bt: rename RpcInstance -> Rpc
* ble: add disconnection reason
* ble: don't open bt record from GAP
* bt: fix RPC session close
* Assets: separate targets for icons and protobuf

Co-authored-by: あく <alleteam@gmail.com>
2021-10-12 19:41:42 +03:00
Albert Kharisov
91c5151518
[FL-1472] Clear default button names (#754)
Co-authored-by: あく <alleteam@gmail.com>
2021-10-12 18:05:02 +03:00
its your bedtime
5cb5d15376
Archive: fix delete from favorites tab (#752)
* archive_delete_file vargs, fix wrong path when deleting item from favorites tab
* use string_t for archive vargs funcs
* favorites manual sorting

Co-authored-by: あく <alleteam@gmail.com>
2021-10-12 16:09:34 +03:00
SG
b85a50f912
[FL-1792] RPC service (#698)
* Lib: added nanopb
* Hal rfid: fixed confused arguments
* Lib: update makefile, include nanopb
* Lib: remove nanopb
* Lib: add nanopb as submodule
* Assets: remove protobuf
* Assets: add protobuf message definitions as submodule
* WIP: [FL-1792] Add Protobuf RPC
* WIP: RPC add ping
* Add Ping
* Fix Ping, Add (WIP) storage
* Update submodule
* ble-glue: add ptotobuf to ble
* WIP: Add storage list test
* revert applications.mk
* Add Storage List command
* ble-glue: fix fast updating rx charachteristic
* ble serial: split long ble packets
* Add Storage Read/Write/Mkdir/Delete
* Disable tests
* Rename Element -> File
* Add md5sum, fix test leak
* Regenerate Protobuf
* Fix review comments
* ble-glue: sync f7 target

Co-authored-by: Albert Kharisov <albert@flipperdevices.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
2021-10-12 14:48:34 +03:00
Skorpionm
4418e73b26
[FL-1912, FL-1939] Sub-GHz frequency analyzer and add new protocol (#746)
* ToolBox: add manchester-decoder and manchester-encoder
* SubGhz: add new FM config cc1101
* Subghz: add protocol Kia
* SubGhz: fix receiving the last packet Nero Radio
* SubGhz: app protocol CAME Twin (TW2EE/TW4EE)
* SubGhz: add protocol CAME Atomo (AT03EV/ AT04EV)
* F7: sync with F6
* SubGhz: add frequency analyzer
* SubGhz: remove space from file name 
* SubGhz: frequency analyzer add filter and fix view
* [FL-1939] GubGhz: Frequency analyzer redesign
* SubGhz: fix incorrect subghz api call sequence in frequency analyzer worker

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-10 17:35:10 +03:00
its your bedtime
5dbfe3d90a
Dolphin_srv timestamp and butthurt; Desktop_srv refactoring (#750)
* dolphin_srv: save timestamp on deed; desktop_srv minor refactoring
* dolphin_srv timegated butthurt increse, desktop refactoring
* desktop app: update debug screen
* remove debug logging
* increasing icounter affects butthurt value
* Dolphin: correct error message on DolphinStore load

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-07 16:32:37 +03:00
its your bedtime
1dd96419ab
[FL-1917] Archive: fix duplicates in favorites (#749)
* Archive: fix last_offset usage when switching to another tab
* fix the fix
2021-10-07 12:41:30 +03:00
gornekich
5232d5daba
[FL-1905] Fix power off notification (#748)
* view dispatcher: add set view front API
* power: add power off notification
* Gui: rename ViewPort `send_to` API.
* Makefile: add blackmagick support

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-06 18:41:22 +03:00
SG
c8b36dd406
[FL-1791] Flipper file format (#740)
* Lib: new flipper file format library
* Lib: flipper file format cpp wrapper
* Storage: simple function for remove file and check error
* iButton app: remove file worker, use new flipper file format instead
* Dialogs: storage error message
* Storage: simple function for mkdir and check error
* iButton app: error messages
* Libs: update makefile
* RFID app: remove file worker, use new flipper file format instead
* Flipper File: library documentation

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-06 12:40:28 +03:00
Nikolay Minaylov
e0c1928fde
[FL-1857] New USB stack (#735)
* libusb_stm32 USB stack test
* USB: Add dual CDC mode
* USB HID demo, added libusb_stm32 as submodule
* Target F6/F7: remomve unused ll_usb

Co-authored-by: n.minaylov <n.minaylov@flipperdevices.com>
Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-06 12:24:09 +03:00
gornekich
42e553bad5
[FL-1723, FL-1662, FL-1870] NFC bug fixes (#745)
* nfc: fix notifications in read EMV sequence
* nfc: set focus on previously saved card
* nfc: add incorrect file format message
* mifare ultralight: increase size of max dump
* elements: draw multiline text only until it fits screen
* nfc: support variable PAN number length
* nfc: change AID display
* nfc: change worker custom event to prevent scene reenter
* nfc: double check for PAN tag
* nfc: fix edit card name appearance
* Nfc: read EMV card without name if PDOL is present.
* Desktop: increase unlock key press interval, switch to OS ticks instead of HAL.
* Desktop: remove debug logging

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-10-05 08:14:19 +03:00
its your bedtime
73a13f584f
Desktop: locked view timeout refactoring, Switch hwmismatch custom view to popup (#744)
Co-authored-by: SG <who.just.the.doctor@gmail.com>
2021-10-04 12:33:31 +03:00
あく
832fb1b795
[FL-1228] FuriHal: add charge suppress API. (#743)
* FuriHal: add charge suppress API.

* FuriHal: add guards to insomnia and charge suppress routines.

* FuriHal: proper API for scheduler in power.

* FuriHal: move charging control from critical section, fix deadlock.

* Gui: use FreeRTOS native timers controls for IconAnimation, fix crash on animation start stop
2021-10-04 10:01:41 +03:00
tonyfreeman
a7edebce69
RFID: Fix integer overflow, fix printf usage (#742)
* Fix comparison of constant 300 with expression of type 'uint8_t' is always false

rfid-worker.cpp:111 if(validate_counts > (5 * 60))

* Fix format string is not a string literal (potentially insecure)

Co-authored-by: Tony Freeman <tonyfreeman@users.noreply.github.com>
2021-10-04 02:30:47 +03:00
あく
89a6c09a7a
[FL-1906] Documentation: add Doxyfile, prepare sources for doxygen. (#741)
* Documentation: add Doxyfile, prepare sources for doxygen.

* Update ReadMe and remove obsolete CLA

* Add contribution guide

* Contributing: update text

* Correct spelling
2021-10-03 13:36:05 +03:00
あく
61aaed8abb
[FL-1908] New animation update scheme (#737)
* Assets: update desktop animation frame rate and cleanup.

* Power: update ViewPort only if changed.

* Gui: tie IconAnimation with View, new update event generation scheme. Desktop: update IconAnimation usage.

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-10-02 20:00:56 +03:00
Anna Prosvetova
6f346597d2
Archive: reorder tabs (#738) 2021-10-02 19:54:10 +03:00
Anna Prosvetova
32467cedd7
Menu: reorder applications (#734) 2021-10-01 14:57:32 +03:00
gornekich
638f276308
[FL-1884] GPIO application (#732)
* gpio: rename gpio application
* bq25896: add reading OTG config
* furi-hal-power: add is_otg_enabled API
* gpio: introduce new GPIO app, add OTG enable / disable
* variable-item-list: add enter callback
* gpio: add output test view and scene
* gpio app: fix GpioItemTester -> GpioItemTest

Co-authored-by: あく <alleteam@gmail.com>
2021-09-30 23:03:28 +03:00
its your bedtime
7a89791b2b
Dolphin_srv: fix state load on startup (#731)
* Dolphin_srv: fix dolphin state load on startup
* Dolphin: new sync and async API, state autosave. Makefile: properly escaped asterisks.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-30 22:50:58 +03:00
gornekich
2eafae6b90
[FL-1498] Keyboard save focus (#730)
* text_input: set focus on Save button if text is set
* text_input: add clear API, format documentation
* all: rework text input clean with new API
2021-09-29 17:08:24 +03:00
あく
8b6c466058
Loader: forget menu position on main menu reentry, proper NULL arg passing. Gui: set current item for menu gui module. (#729) 2021-09-29 07:18:28 +03:00
its your bedtime
0126b3aba4
[FL-1850] Archive: limit name length in text input view #728 2021-09-28 19:18:06 +03:00
あく
ec18c1a92a
[FL-1781] Desktop: change first start logic, show only if factory provisioned. (#727)
* Desktop: change first start logic, show only if factory provisioned.
* Desktop: code cleanup, correct first start scene position in scene stack.
* Desktop: Remove unused include
2021-09-28 17:42:52 +03:00
gornekich
61c8f3325a
[FL-1217] Menu refactoring (#726)
* menu: remove dead code
* loader: change views from modules instead of menu service
* dolphin: start main menu with loader API
* applications: don't start menu service
* loader: add debug tools menu
* gui modules: introduce menu model
* loader: remove calls to menu service API
* gui modules: implement menu module
* loader: add menu view
* gui menu: add animation
* applications: remove menu service
* gui modules: rename icon_menu -> menu
* loader: clean up code
* menu module: add documentation, format code
* menu: remove unused parameter
* desktop: use loader to launch primary menu
* Applications: cleaner makefile app declaration. Loader: application autostart
* Gui: cleanup menu and submenu API.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-28 16:10:13 +03:00
its your bedtime
1c4e6ec74d
[FL-1824] Dolphin refactoring (#701)
* refactoring p1
* refactoring p2
* cleanups
* locked screen refresh rate fix
* better locked view logic
* seperate dolphin service and desktop app
* Desktop: Favorite app acess (Left key), Settings app
* Desktop settings version, submenu header
* remove unused icon anomation + naming fix

Co-authored-by: あく <alleteam@gmail.com>
2021-09-28 12:40:39 +03:00
Skorpionm
a8981d317a
[FL-1815, FL-1851, FL-1856] SubGhz: preparation for certification, add deleting stored signals and rename file in SubGHz app (#714)
* [FL-1811] FuriHal: move core2 startup to hal init stage, prevent working with flash controller till core2 startup finish. #704
* SubGhz: fix GO0 low on last hop transmission,  decreased DutyCycle in tests
* SubGhz: test_static fix max 5 sec in transmission mode, DutyCycle <23%
* [FL-1815] SubGhz: prohibiting transmission if it is not within the permitted range for the given region
* SubGhz: fix F7 furi-hal-subghz
* SubGhz: fix logic working tests
* SubGhz: fix princeton encoder for test
* SubGhz: add log princeton encoder
* [FL-1856] Subghz: fix output a double error if the file cannot be opened
* [FL-1851] SubGhz: add deleting Stored Signals in SubGHz App
* SubGhz: add rename file SubGhz app
* SubGhz: update stats message in princeton
* SubGhz: correct spelling
* SubGhz: fix FM config,  add hardware signal processing less than 16 μs,  add added filter for processing short signals
* SubGhz: add Scher-Khan MAGICAR Dinamic protocol
* SubGhz: sync fury targets

Co-authored-by: あく <alleteam@gmail.com>
2021-09-28 03:05:40 +03:00
SG
416e1bda35
[FL-1881] iButton cli: enable "OTG" when performing "onewire search" #725 2021-09-27 17:00:03 +03:00
SG
34f9493451
[FL-1747] iButton: fix forgotten timer IRQ #724 2021-09-25 02:13:07 +03:00
SG
acb8508249
[FL-1880] Dialogs: fix semaphore lock (#722)
* Dialogs: fix queued message lock
* Dialogs: file select, fix queued message lock
* Dialogs: file select, free context after freeing callback holder
* Dialogs: better lock, separated wait and free

Co-authored-by: あく <alleteam@gmail.com>
2021-09-24 19:36:53 +03:00
gornekich
d3b58f732f
[FL-1783] Power service refactoring (#718)
* settings power: introduce power settings app
* power: move power API to separate file
* settings power: implement reboot scene
* settings power: add power off scene
* assets: add crying dolphin, fix Subghz assets names
* settings power: fix power off scene GUI
* settings power: add battery info scene
* power: add cli to application on start hook
* power: remove power from main menu
* power: move to power service folder
* power service: rework power off logic
* power: add pubsub events
* bt: subscribe to battery level change, update characteristic
* application: change order of Settings applications
* gui: add bubble element
* power: gui improvements
* application: rename Notification -> LCD and notifications
* Applications: menu order according to documentation and add missing power cli init
* settings power: add disconnect USB scene
* power cli: notify user to disconnect USB after poweroff
* Power: update poweroff message in cli

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-24 19:28:02 +03:00
SG
c64052b491
[FL-1042][FL-1485][FL-1747] Metakom emulation fix (#721)
* iButton: Metakom emulation fix
* iButton: do not threat NVIC
* iButton: use proper GPIO from resources

Co-authored-by: あく <alleteam@gmail.com>
2021-09-24 15:16:59 +03:00
its your bedtime
effda5ab44
[FL-1852] Archive: browser offset fix (#716)
* Archive app: check last offset value upon updating offset
* fix browser empty storage hang up

Co-authored-by: あく <alleteam@gmail.com>
2021-09-24 15:03:04 +03:00
SG
1448b9cf66
[FL-1819][FL-1848] About: hw, fw, boot version screens. Misc corrections of the About screens. (#719)
* About: hw, fw, boot version screens
* About: fix comment
* FuriHal: proper ARR in OS tick timer
* GpioTester: all pins on/off option
* Irda: fix release build
* Format sources

Co-authored-by: あく <alleteam@gmail.com>
2021-09-24 14:56:27 +03:00
its your bedtime
4c05f67686
[FL-1823, FL-1824] Archive app: refactoring and UI improvements (#711)
* Archive app: skip empty app folders, file menu in favorites tab, looped tab switching
* refactoring
* cleanup
* better filepath trim
* fix excessive view updates, various small optimizations
* better list_offset calculation, favorites vargs)
* revert poor fix

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-21 13:56:33 +03:00
gornekich
0e1922db4d
BT: stop advertising in bt test cli commands (#712)
* bt: stop advertising in bt test cli commands
* furi-hal-bt: add switch context in furi_hal_bt_lock_flash
* Lib: update STM32CubeWB to latest version. Scripts: update supported copro binaries version
* Scripts: proper version extraction from Cube manifest
* bt: add debug application and comment it
* bt: fix stop advertising command
* bt: debug on f7 target
* furi-hal-console: add console tx + new line
* bt: fix debug trace function

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-21 12:48:08 +03:00
tonyfreeman
69f54973cc
Nfc: fix incorrect type castings. Global: fix printf usage, types casting, overall cleanup. Drivers: incorrect array index in cc1101 driver. (#713)
* fix 'function cannot return qualified void/bool type'
* Fix variable 'consumed' is used uninitialized
* Fix format string is not a string literal (potentially insecure)
* Fix conflicting types for 'menu_item_get_type'
* Fix implicit conversion from enumeration type 'NfcDeviceType' to different enumeration type 'rfalNfcDevType'
* Fix hal_gpio_init incorrect arguments order
* Fix nfc->dev.dev_name condition will always evaluate to 'true'
* Fix explicitly assigning value of variable to itself
* Fix furi_hal_bt_wait_startup counter overflow
* Fix implicit conversion from 'StorageStatus' to 'SDError'
* Remove #include <sys/param.h>
* Add FIXME
* Fix syntax
* Fixup for 'furi_hal_bt_wait_startup counter overflow'
* nfc: fix different nfc device types
* Drivers: fix incorrect offset in cc1101_read_fifo
* Remove obsolete comment

Co-authored-by: Tony Freeman <tonyfreeman@users.noreply.github.com>
Co-authored-by: gornekich <n.gorbadey@gmail.com>
Co-authored-by: あく <alleteam@gmail.com>
2021-09-21 12:34:16 +03:00
SG
9b0aa0d6dc
Settings: about screen (#715) 2021-09-20 21:39:52 +03:00
あく
322bdf049d
[FL-1826] Crypto: correct key provisioning procedure. (#709)
* Crypto: correct key provisioning procedure.
* Format Sources
* Cli: target for bootloder in device_info
2021-09-17 12:21:08 +03:00
gornekich
f05153ed5c
[FL-1816] Fix ble radio stack is alive check (#707)
* bt: fix bt_is_alive return, add bt_is_active
* bt: fix bt_is_alive return
* Cli: show heap usage in ps.
* FuriHal: strict sequence for flash operations
* Scripts: add stress test
* Core: proper heap calculation.

Co-authored-by: あく <alleteam@gmail.com>
2021-09-16 19:12:07 +03:00
あく
b4ffc1f81b
[FL-1817] Add firmware target in device_info (#708) 2021-09-16 16:42:21 +03:00
Albert Kharisov
4f233ff0a3
[FL-1800] IRDA: enc/decoder refactoring, Add NEC42 (#705)
* WIP: IRDA: multilen protocol refactoring, NEC42
* IRDA: Refactoring encoder/decoder

Co-authored-by: あく <alleteam@gmail.com>
2021-09-15 20:22:58 +03:00
gornekich
4768177cf5
[FL-1796] Disable bluetooth (#703)
* bt: add authentication for all characteristics
* bt: app_ble cleanup
* bt: add start and stop advertising API
* bt: rework application with start and stop advertising API
* bt: support f7 target
* bt: f7 target remove unused files
* bt: stop advertising in bt debug application
* bt: fix bt status bar update
* bt: change bluetooth On Off order
2021-09-15 19:58:32 +03:00
Skorpionm
8fd411097e
[FL-1758, FL-1790] SubGhz refactoring part 2, fix generation of a new GateTX serial (#696)
* WidGet: fix name  Multiline String Element
* SubGhz: rename  SubGhzProtocol to SubGhzParser and bring it up
* SubGhz: a new way to navigate in receiver views
* SubGhz: fix syntax
* WedGet: add forwarding input type to wedget button callback, fix using a callback in an application
* SubGhz: add assertions and status checks
* SubGhz: fix syntax
* [FL-1790] SubGhz: fix GateTX
* SubGhz:  add 434.42 MHz frequency support
* SubGhz: rename type protocol, add decoder stage names
* SubGhz: fix navigation through received signals when changing scenes
* SubGhz: fix 2-fsk config

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-15 18:24:19 +03:00
あく
72ca76097a
[FL-1811] FuriHal: move core2 startup to hal init stage, prevent working with flash controller till core2 startup finish. #704 2021-09-15 17:40:09 +03:00
あく
66f9d946ae
[FL-1490] FuriHal: crypto api. Crypto cli tool. (#702)
* FuriHal: crypto layer
* Furi: add crash routine.
* FuriHal: crypto api. Crypto: cli command to manipulate secure enclave and encrypt/decrypt plain text.
* DeviceInfo: secure enclave verification.
* Rename original to enclave_valid
* Update expected enclave signature to match production keys
* F7: remove unused files
2021-09-15 12:59:49 +03:00
gornekich
95d9140d24
[FL-1795] BLE GAP refactoring (#694)
* ble: remove heart rate profile
* ble-glue: delete dead code
* ble-glue: dis refactoring
* ble-glue: add battery service
* broken ble_common refactoring
* ble-glue: advertise 128 bit service uid
* ble-glue: remove dead code
* ble: advertise service 16 bit uid depending on flipper color
* ble-glue: remove debug
* ble: intriduce serial service
* ble: serial over ble
* bt: serial echo server
* bt: serial service process indicate acknowledge
* bt: serial service event handler update
* bt: refactore battery service
* bt: add battery level apdate API
* power: update battery level on change
* bt: refactore device information service
* app_ble: pairing configuration
* bt: display pin code
* bt: refactor battery service
* bt: refactor device info service
* bt: change advertise timer to freertos one
* bt: separate app_ble to hci and gap
* bt: increase max ble packet size
* gap: refactoring
* bt: refactor serial service
* bt: support f7 target
* bt: not blocking pin code show request

Co-authored-by: Anna Prosvetova <anna@prosvetova.me>
Co-authored-by: あく <alleteam@gmail.com>
2021-09-13 14:25:37 +03:00
its your bedtime
a4dae290e2
[FL-1803] Archive: fix update_offset logic #695 2021-09-10 20:06:34 +03:00
its your bedtime
b6579d66d8
Archive refactoring WIP (#688)
* view_dispatcher queue
* refactoring, all works
* scenes

Co-authored-by: あく <alleteam@gmail.com>
2021-09-10 03:57:43 +03:00
Skorpionm
f385340b2e
[FL-1758] SubGhz refactoring part 1 (#689)
* SubGhz: refactoring
* WeGet: Add support for outputting formatted lines, events center button pressed, center button released
* Variable Item: slightly changed the display of data on the screen
* SubGhz: add show errors, add show preset, refactoring
* SubGhz: refactoring transmitter
* SubGhz: removed unused modules
* SubGhz: Add FuriHalSubGhzPresetOok270Async setting menu
* SubGhz: fix annotation
* SubGhz: add support Nero Radio

Co-authored-by: あく <alleteam@gmail.com>
2021-09-10 03:29:57 +03:00
Albert Kharisov
fbccb9fbaf
[FL-1684] IRDA Add SIRC protocol (#693)
* IRDA HAL: Fill buffer refactoring
* IRDA: Add SIRC protocol
* IRDA: correct adr/cmd bit length
* Disable Unit tests

Co-authored-by: あく <alleteam@gmail.com>
2021-09-10 00:37:32 +03:00
gornekich
9bce160ca6
[FL-1722] BLE custom serial service (#685)
* ble: remove heart rate profile
* ble-glue: delete dead code
* ble-glue: dis refactoring
* ble-glue: add battery service
* broken ble_common refactoring
* ble-glue: advertise 128 bit service uid
* ble-glue: remove dead code
* ble: advertise service 16 bit uid depending on flipper color
* ble-glue: remove debug
* ble: intriduce serial service
* ble: serial over ble
* bt: serial echo server
* bt: serial service process indicate acknowledge
* bt: serial service event handler update
* bt: refactore battery service
* bt: add battery level apdate API
* power: update battery level on change
* bt: refactore device information service

Co-authored-by: あく <alleteam@gmail.com>
2021-09-10 00:11:32 +03:00
gornekich
4b7d9b79a9
[FL-1748] NFC, iButton edit fix (#680)
* nfc: fix edit UID without confirmation
* ibutton: fix key edit
* nfc: fix nfc uid edition
* nfc: fix structure type name
2021-09-02 12:28:40 +03:00
its your bedtime
ae08c88bd6
[FL-1472] Infrared: long names fix (#679)
* Infrared app: fix long button names
* Ble: fix missing icon on start without config.
* Gui: slow but nice string fitting.
* Gui: fit header string in button menu

Co-authored-by: あく <alleteam@gmail.com>
2021-09-02 12:02:34 +03:00
gornekich
420c03bb58
[FL-1720] BLE GUI refactoring (#678)
* dialog_ex: add clean method, fix documentation
* application: add bt debug and settings application
* bt: add debug application
* bt: add settings application
* bt: rework bt service
* bt debug: fix carrier debug app
* assets: add debug animation to main menu
* bt debug: fix bt packet test
* bt service: rework bt service
* bt: cleanup
* Assets: fix spelling
* Ble: wait for core 2 startup complete before initializing radio stack.
* Accessor: remove dead code, switch port PA6 to PA4, because interrupt line 6 is used by down button.
* FuriHal: assert interrupt line on add_int_callback.
* Bt: update icon on core2 startup complete.

Co-authored-by: あく <alleteam@gmail.com>
2021-09-02 02:22:40 +03:00
Skorpionm
e17336498d
[FL-1756, FL-1769, FL-1776, FL-1759] Gui: input events complementary V3, refactoring. SubGhz: read/emulate fixes. Cleanup. (#684)
* Gui: move rotation logic to ViewPort, replace delayed View switch in ViewDispatcher with event filtering and redirection to previous view.
* SubGhz: add function description
* Gui, Input: add event id to input events.
* SubGhz: fix "crashing on ?"
* SubGhz: add icon scanning
* SubGhz: updated interface read scene,  updated interface config scene
* Assets: update subghz assets
* SubGhz:  replaced the picture in the read scene, changed the paths to additional files
* SubGhz: fix deadlock in timer callback
* SubGhz: fix icon read scene
* SubGhz: fix icon read scene
* SubGhz: fix duble text transmitter scene
* SubGhz: correct spelling. Gui: bigger queue for ViewDispatcher.
* SubGhz: fix creation and transmission of dynamic code without the presence of a manufactory key
* SubGhz: fix keelog, setting a name in the absence of a manufactory key
* SubGhz: fix load bad keelog key
* Format sources
* Furi: remove garbage from core. GpioTester: fix memory leak and cleanup
* Accessor: remove obsolete notification code
* MusicPlayer: remove input event injection
* Input: rename id to sequence

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-09-02 00:05:00 +03:00
Anna Prosvetova
3ed26e61eb
NFC: Fix typo in the struct name (#683) 2021-09-01 09:07:53 +10:00
あく
433025b5c7
Input, Gui: total events complementarity on all levels (#681)
* Cli: add missing const in cli_write.
* Gui, Input: bit fields based key complementarity on all levels, key and type names API.
* Gui: minor cleanup of bit filed usage
2021-08-31 11:22:52 +03:00
Skorpionm
6f7bcdf9a7
[FL-1755, FL-1756] added LL_DeInit timers, removed Analyze scene, redesigned astomatic frequency change mechanism, updated subghz read scene interface (#677)
* SubGhz: Fix Timer hopping
* SubGhz: add display of received packages and their maximum number. redesigned interface, the maximum number of received packages increased to 50
* SubGhz: add clearing history on exit read scene, jump after saving the key into the history of received signals
* SubGhz: Fix honoring the width of the icon for transmitter scene
* RFID: Fix [FL-1755] freeze after key emulation
* SubGhz: drop analyze scene and views
* SubGhz: fix save scene
* Input, GUI: new event delivery scheme that groups event for complementarity.
* Gui: update View Dispatcher documentation
* Gui: remove dead code, wait till all input events are delivered in ViewDispatcher in queue mode.
* Gui: update comment in ViewDispatcher
* FuriHal: fix incorrect clock disable invocation
* FuriHal: proper include
* SubGhz: properly reset history in receiver view
* Gui: correct view switch order and non-complementary events discarding

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-30 23:05:09 +03:00
its your bedtime
48c29aef29
[FL-1539] Archive app: correct cursor index after key renaming #675 2021-08-30 14:33:12 +03:00
Skorpionm
663dbbfe9f
SubGhz: frequency hopping mode (#671)
* SubGhz: fix assert on worker double stop.
* SubGhz: add hopping mode (315.00, 433.92, 868.00)
* SubGhz: add support for new alarms on the keelog protocol
* SubGhz: update te in princeton protocol
* SubGhz: move static to tests, rename sniffer to hopper/auto, remove delay from timer thread, optimize locking strategy.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-29 16:05:15 +03:00
Skorpionm
0a8a944e10
Skorp subghz signal archive (#667)
* SubGhz: Add millis() furi, add subghz history struct
* SubGhz: Fix subghz history
* Gubghz: Fix code repeat  history, add clean history
* SubGhz: reading and adding keys to history
* Gui: Renaming Sub 1-Ghz -> SubGhz
* Archive: Renaming Sub 1-Ghz -> SubGhz
* SubGhz:  Add menu history, modified button for sending a signal, changed output of data about accepted protocol
* Archive: Fix name subghz
* SubGhz: Menu navigation
* Assets: Add assets/SubGHz/icon.png
* Assets: add new icons for subghz
* SubGhz: Fix name Add manually scene
* SubGhz: Fix load icon Read scene. rename encoder struct,  rename protocol function load from file, add load raw data protocol, add info pleasant signals all protocol
* SubGhz: fix memory leak
* SubGhz: change of receiving frequency for read scene
* SubGhz: Add save/load frequency and preset, add automatic configuration of transmit/receive to the desired frequency and modulation, add button "save" config scene
* SubGhz: Fix frequency and preset, fix frequency add manualli scene, fix re-executing the parser
* Furi-hal-subghz: add 2-FSK config, fix ook config 650KHz BW Tx filter
* Fix formatting and release build
* SubGhz: Delete read scene
* SubGhz: Fix frequency add manualli scene,  refactoring code
* SubGhz: 2 profiles for OOK, fix broken build.
* SubGhz: Add passing static codes from read scene, add notification read scene, refactoring code
* SubGhz: fix assert on worker double stop.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-28 16:51:48 +03:00
its your bedtime
1b6a942f4a
[FL-1690] Archive app: favorites.txt (#662)
* Archive: file parsing wip
* Archive: favorites.txt read, open keys
* Archive: add to fav/ delete works
* Archive: newline fix
* Archive: refactoring 1/2
* Archive: delete from favorites too if pinned
* Archive: rename handling and refactoring
* Archive: cleanups
* Archive: file_worker fix
* Archive: fix offset issue + cleanups
* Archive: favorites on internal storage

Co-authored-by: Anna Prosvetova <anna@prosvetova.me>
Co-authored-by: あく <alleteam@gmail.com>
2021-08-28 14:46:11 +03:00
SG
941b733046
[FL-1744] CLI: rename tm to ikey, add onewire search command (#672)
* CLI: rename tm to ikey, add onewire search command
* Cli onewire: removed delimiters in addresses

Co-authored-by: あく <alleteam@gmail.com>
2021-08-26 21:15:43 +03:00
あく
dd8a90957f
Fix SubGhz test views erratic behavior on mode switch. New bootloader image. (#669)
* Assets: add bootloader DFU icon.
* SubGhz: locking model in test views, wait for calibration complete on frequency change.
2021-08-24 02:52:59 +03:00
SG
153666f73f
F6: USB glue cleanup and fixes (#666)
* USB-CDC: accepting the next data packet only if we process previous data
* USB-CDC: use USB FS packet size
* HAL-console: puts method
* Check: print assertion data
* FuriHal: rx stream free space aware CDC confirmation.
* Bootloader: pull down USB lines, leave the rest to the firmware or bootloader
* F6: cleanup and move USB code to usb-glue folder, add USB suspend/resume events to VCP, cleanup target.mk, fix missing motd message in cli when using minicom.
* F5: cleanup the rest of USB glue code, adjust LPM and Power info data in descriptor.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-22 13:43:45 +03:00
Albert Kharisov
e6d5f4038b
[FL-1696, FL-1685] IRDA: Add RC5, decoder refactoring (#663)
* [FL-1696] IRDA: Split decoders and protocols
* IRDA: Restruct directories.
* IRDA: fix long timings
* [FL-1685] IRDA: Add RC5

Co-authored-by: あく <alleteam@gmail.com>
2021-08-20 23:51:15 +03:00
gornekich
ecff31d228
[FL-1643] NFC emv assets (#661)
* assets: add EMV AID table for NFC app
* file-worker: add searching for value by the key
* nfc: add emv parser helpers
* assets: add country and currency codes
* nfc: add country and currency code parsing
* emv_decoder: add country and currency code support
* nfc: add AID. currency and country display
* nfc: rework bank_card view
* nfc: add currency and country save
* assets: change emv chip asset
* nfc: change asset in bank card
* gui: add frame element to widget
* nfc: add bank card frame, add documentation
* rfal: fix long APDU command emulation
* nfc: fix typos
* Scripts ReadMe: assets delivery command

Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-08-20 22:56:43 +03:00
gornekich
227ef47e2d
[FL-1641] File select fix #658
Co-authored-by: あく <alleteam@gmail.com>
2021-08-19 03:24:52 +03:00
Albert Kharisov
5f6aff2255
[FL-1472, FL-1596, FL-1673] IRDA: stability improvements (#655)
- Restrict with 31 bytes length for remote and signal name
- Don't stuck for 0 PWM cycle timings
- Support timings > 65535 PWM cycles
- Fix remote file open error
- Add IRDA TX debug redirect
- Add remote parse error print, improve parsing, support tabs
- Fix stucks with uncorrect RAW signal values, long strings in remote file, etc
- Fix HAL signals capturing (save previous read value)
- Fix leak in case of failed parsing
2021-08-19 03:18:42 +03:00
SG
9d38f28de7
[FL-1682] Faster file receiving function. Storage management scripts. (#647)
* Storage-cli: the file write function is splitted into a function for working with text and function for raw data
* Storage-cli: read_chunks, renamed write_raw to write_chunk
* Storage-cli: fix typo
* SD Hal: fixed wrong read/write block address
* HAL-console: printf
* Storage benchmark: more popular sizes
* Toolbox: md5
* Storage-cli: better read_chunks function, md5 hash function
* Notification: fixed incorrect error message when loading settings
* Storage-cli: stat command
* Storage-cli: stat, "/" is also storage
* Scripts: add storage managment script
* Scripts, storage lib: send command with known response syntax instead of SOH
* Scripts: python3 from env
* Storage-cli: fixed mess with error texts
* Storage-cli: write, show welcome message only if we didn't have any errors
* Storage: poorly fixed folders copying
* Storage: close an old file if an error occurred while opening a new file
* Storage-cli: fixed storage info spacing
* Scripts: use positional arguments in storage.
* Scripts: explicit string encoding and decoding, documentation in comments.

Co-authored-by: あく <alleteam@gmail.com>
2021-08-19 01:06:18 +03:00
あく
d04deb48b8
Dolphin: fix archive double start crash (#659) 2021-08-18 18:06:55 +03:00
あく
f02cec45a0
[FL-1473, FL-1651] Update STM32CubeWB to latest version. Radio firmware bundle. (#642)
* FuriHal: update STM32CubeWB to latest version.
* Makefile: debug other script
* FuriHal: correctly handle 0 size transfers in VCP
* Dolphin: cleanup and minor timer tuning.
* FuriHal: update FreeRTOS config with bigger timer command queue.
* FuriHal: delayed irq enabling, fixes missing ticks.
* FuriHal: use SFSA to determine free space for internal FS, update linker script to use as much space as theoretically possible.
* Scripts: update core2 flashing scripts and OB data.
* Github: bundle resources, core2 firmware and supplementary data.
* GitHub: versioning for supplemental artifacts
2021-08-17 12:41:08 +03:00
its your bedtime
1f192c4a48
[FL-1675] Dolphin scene and included apps removed #638
Co-authored-by: あく <alleteam@gmail.com>
2021-08-17 00:53:35 +03:00
gornekich
c122317468
[FL-1526] Mifare Ultralight emulation (#645)
* rfal: add discovery parameter for passing listen activation
* nfc: add discovery parameter to furi_hal_nfc_listen
* mifare_ul: add emulation parsing commands
* nfc: add mifare ul emulation
* nfc: switch to mifare ultralight emulation form menu
* furi-hal-nfc: add first frame reception in emulation mode
* nfc: change argument check
* nfc: rework nfc worker and mifare ul lib
* mifare_ul: add write and cnt increment commands
* nfc: add card modification check
* mifare_ul: add data changed flag
* nfc: add shodow files
* nfc: add restore original file

Co-authored-by: あく <alleteam@gmail.com>
2021-08-17 00:45:04 +03:00
its your bedtime
e1d80d5402
responsive ui for not implemented features in lock menu (#648)
Co-authored-by: あく <alleteam@gmail.com>
2021-08-16 23:50:49 +03:00
Skorpionm
a024e470b7
SubGhz: read and save static remotes. Create new static and dynamic remotes. (#646)
* SubGhz: the functions of saving loading KeeLog have been modified, saving KeeLog is prohibited
* SubGhz: Fix displaying Nice FlorS in the Raed scene
* SubGhz: Fix displaying Faac SLH in the Raed scene
* SubGhz: Fix displaying iDo in the Raed scene
* SubGhz: Fix displaying Star Line in the Raed scene
* SubGhz: Fix displaying Nice Flo in the Raed scene, added save and load functions. (testing needed, no remote control)
* SubGhz: subghz_beginadded common encoder upload signal
* SubGhz: add Came encoder
* SubGhz: modified pricenton encoder, fix view transmitter hide the "Send" button if there is no encoder
* SubGhz: add nice flo encoder, need testing no remote control
* SubGhz: add gate_tx encoder
* SubGhz: add nero_sketch encoder
* SubGhz: add keelog encoder
* SubGhz: add long upload upload while the button is pressed while releasing the transfer is over, with a check for sticking (maximum 200 upload repetitions)
* SubGhz: fix max upload
* SubGhz: Fix structure subghz add encoder
* SubGhz: add generating and sending a dynamic keelog key, refactoring the code
* SubGhz: add notifications
* SubGhz: add creating a new remote control (Pricenton, Nice Flo 12bit, Nice Flo 24bit, CAME 12bit, CAME 24bit, Gate TX, DoorHan)
* SubGhz: Fix load file, fix scene start
* Subghz: Fix show key
* SubGhz: Fix subghz_cli
* SubGhz: Fix furi-hal-subghz
* Format sources
* SubGhz: standard notification scheme, fix broken assert in DMA.
* SubGhz: move level alignment logic to furi-hal-subghz, fix spelling, cleanup.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-16 22:56:23 +03:00
あく
129031e779
Cli: ctrl+c reset buffer (#639) 2021-08-13 16:18:13 +03:00
Skorpionm
1cfa857f98
[FL-1610] SubGhz: scene based application, PT save and replay (#630)
* SubGhz: scene based application
* SubGhz: encoder/decoder separation, DMA streaming, update app and cli.
* SubGhz: 2 stage async tx complete, minor cleanup
* SubGhz: 2 stage async tx complete, FIX state pin end transmit
* SubGhz: Pricenton, receive TE signal
* SubGhz: Pricenton, add save data, add load data
* SubGhz: Add Read scene, Fix pricenton save, load funtion
* SubGhz: Add Read, Receiver, SaveName scene
* SubGhz: Read and Save (pricenton)
* SubGhz: add Load scence
* SubGhz: Fix select file scene, add load scene, add transmitter view, add send tx pricenton
* SubGhz: Fix pricenton encoder, fix transmitter send
* SubGhz: modified Pricenton Encoder (added guard time at the beginning), modified CC1101 config, code refactoring
* SubGhz: Fix pricenton encoder defalut TE
* Archive: Fix path and name SubGhz
* Archive: Fix name app SubGhz
* GubGhz: Came: add Save, Load key
* GubGhz: GateTX: add Save, Load key
* GubGhz: NeroSketch: add Save, Load key
* Github: better linters triggers
* SubGhz: adding fast loading keys Archive -> Run in app
* GubGhz: KeeLog: add Save, Load key, key generation from the serial number of the meter and the button
* SubGhz: format sources and fix compilation
* FuriHal: add subghz configuration description for AGC section
* SubGhz: save only protocols that can be saved. Cleanup.
* Github: lint on pull requests

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-08-12 17:42:56 +03:00
あく
37d7870e52
[FL-1666] Bootloader: info screen when we going to DFU. FuriHal: port SPI to LL. Cleanup. (#634)
* FuriHal: port spi to ll. Bootloader: add spi and display.
* Makefile: rollback disabled freertos introspection
* FuriHal: spi lock asserts. F6: minor cleanup port sdcard shenanigans to furi_hal_gpio.
* SdCard: port missing bits to furi-hal-gpio
* FuriHal: fix broken RX in SPI, update SPI API usage. RFAL: more asserts in SPI platform code.
* GUI: clear canvas on start. FuriHal: no pullup on radio spi bus.
* FuriHal: use check instead of assert in spi lock routines
* FuriHal: remove timeouts
* SdHal: add guard time to SDCARD CS PIN control.
* FuriHal: proper name for SPI device reconfigure routine. SdHal: one more enterprise delay and better documentation.
* Bootloader: update DFU text and add image.
* FuriHal: drop unused ST HAL modules.
* SdHal: fixed swapped hal_gpio_init_ex arguments
* SpiHal: fixed swapped hal_gpio_init_ex arguments
* IrdaHal: use hal_gpio_init instead of hal_gpio_init_ex
* RfidHal: fixed swapped hal_gpio_init_ex arguments

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-08-12 11:48:05 +03:00
Albert Kharisov
5ed9bdbc37
[FL-1652, FL-1554] IRDA: Continuous transmitting (#636)
* [FL-1652] IRDA: Continuous transmitting
* continuous encoding and sending signals by pressing button on menu
* fast buttons scrolling in remote menu
* bruteforce: stop reading file if progress == 100%
* IRDA: .hpp -> .h
* [FL-1554] IRDA: xTaskNotify -> osEventsFlagSet
* IRDA: some stability fixes
* Irda: minor cleanup, api-hal to furi-hal rename.

Co-authored-by: あく <alleteam@gmail.com>
2021-08-11 20:51:06 +03:00
its your bedtime
f465220066
[FL-1632] Dolphin: feed mini game (#627) 2021-08-11 19:55:56 +03:00
Anna Prosvetova
b05453ecff
RFID: Fix various EM-Marin typos (#635) 2021-08-11 02:09:51 +03:00
SG
b8b0417374
[FL-1629] Better RFID writing (#632)
* RFID: ground the antenna when writing
* RFID: forced switch to indala mode
2021-08-09 15:33:13 +03:00
SG
c799fcf416
Storage: fixed internal info if name is null (#631) 2021-08-09 04:27:51 +03:00
あく
0a97d6913c
Rename api-hal to furi-hal (#629) 2021-08-08 21:03:25 +03:00
あく
7907cb232b
Applications: unified entry point naming scheme, drop dead code, cleanup. (#628) 2021-08-07 19:54:42 +03:00
Albert Kharisov
ba399abb5d
IRDA: Use DMA for async TX (#608) 2021-08-06 00:11:35 +03:00
its your bedtime
9c38efd4ef
[FL-1427] Dolphin: new assets and engine rework (#546) 2021-08-05 23:49:04 +03:00
gornekich
5741ed2bd5
[FL-1595] Add EMV tags (#625)
* nfc: add expiration date tag to emv parser
* nfc: add expiration date save and display
* nfc: add long apdu test command
2021-08-04 21:58:11 +03:00
gornekich
841804026e
[FL-1619] NFC long APDU emulation (#623)
* nfc: add apdu sequence exchange debug scene
* api-hal-gpio: fix GPIO initialization
* nfc: pull down nfc chip IRQ pin

Co-authored-by: あく <alleteam@gmail.com>
2021-08-03 20:24:20 +03:00
SG
15592682ad
Notification settings: correctly count values with a zero index (#621) 2021-08-03 20:07:39 +03:00
あく
bf6c9fe114
Applications: add stack_size to keypad_test and assert in furi thread (#620) 2021-08-02 18:32:15 +03:00
SG
95f44f4d33
[FL-1625] Overcurrent monitoring. Cli command for external 3.3v dcdc control. (#615)
* Apps: power observer for overcurrent monitoring
* Power: cli command for enable\disable externat 3.3v dcdc

Co-authored-by: あく <alleteam@gmail.com>
2021-08-02 14:15:24 +03:00
SG
6926cf8b7e
[FL-1449] Indala reading and writing (#616)
* Rfid: indala 40134 validation and decoding
* Rfid: show indala info
* Rfid: decoder to output comparator signal on gpio pins
* Rfid: working indala 40134 decoder
* HAL: added function to change rfid timer parameters on the fly
* RFID: Indala reading, card detection, card verification
* Rfid: indala writing
2021-08-02 01:11:18 +03:00
SG
fb80f9537f
[FL-1616] RFID: fix HID emulation (#610)
* Rfid: fixed HID emulation by adding zero pulse every 4 bits
* Rfid: HID emulation fixed with DSP based FSK oscillator.
2021-07-30 14:12:36 +03:00
あく
4c85bfedca
[FL-1620] Cli command list crash fix. Correct name validation in scripts. (#613)
* Scripts: fix incorrect name validation regexp.
* Cli: fix command list iteration.
2021-07-29 18:27:06 +03:00
gornekich
91c1eaf5a8
[FL-1543] Scene manager search scene API (#611)
* scene_manager: search -> search_and_switch_to previous_scene
* scene_manager: add search and switch to another scene API
* scene_manager: Navigation -> Back event
2021-07-28 17:52:00 +03:00
あく
1c58de24f5
Nfc: switch to HAL ticks. ApiHal: small cleanup and refactoring. (#609) 2021-07-28 11:45:42 +03:00
あく
4c1ac2a13d
[FL-1590] SubGhz: fix incorrect limits on frequency that were causing crashes #607 2021-07-27 14:47:45 +03:00
its your bedtime
2313b948c6
[FL-1613] First start screen assets update #606 2021-07-26 21:08:41 +03:00
SG
81080a3a8b
[FL-1191] Storage: CLI mkdir command #603
Co-authored-by: あく <alleteam@gmail.com>
2021-07-25 14:55:23 +03:00
gornekich
ebd158a823
[FL-1542], [FL-1603] Generate random name (#602)
* Lib: add random name library
* Text_input: add default text clearing
* All: rework all applications with new text_input API
* Nfc: fix removing dev file on save_name scene enter
* Lib: move all free radicals to toolbox and update API usage.

Co-authored-by: あく <alleteam@gmail.com>
2021-07-25 14:34:54 +03:00
its your bedtime
413e3d5013
[FL-1435] correct text position for "Successfully written" msg #600
Co-authored-by: あく <alleteam@gmail.com>
2021-07-23 16:42:48 +03:00
its your bedtime
d25dabe025
[FL-1606] Hide "Unlocked" message on any user interaction #599
Co-authored-by: あく <alleteam@gmail.com>
2021-07-23 16:15:25 +03:00
gornekich
3f640e8f1c
[FL-1549] Gui Widget module (#598)
* gui_widget: rework with mlib container
* widget: rename gui_widget-> widget; gui_element->widget_element
* gui: move widget from nfc to gui/modules
* nfc: rework widget usage
* nfc: return to ReadEmvAppSuccess scene after ReadEmvDataSuccess exit

Co-authored-by: あく <alleteam@gmail.com>
2021-07-23 16:09:34 +03:00
SG
ad421a81bc
[FL-1191][FL-1524] Filesystem rework (#568)
* FS-Api: removed datetime manipulation functions and most of the file flags
* Filesystem: common proxy api
* Filesystem: renamed to Storage. Work has begun on a glue layer. Added functions for reentrance.
* Storage: sd mount and sd file open
* Storage: sd file close
* Storage: temporary test app
* Storage: free filedata on close
* Storage: sd file read and write
* Storage: added internal storage (LittleFS)
* Storage: renamed internal commands
* Storage: seek, tell, truncate, size, sync, eof
* Storage: error descriptions
* Storage: directory management api (open, close, read, rewind)
* Storage: common management api (stat, fs_stat, remove, rename, mkdir)
* Dolphin app and Notifications app now use raw storage.
* Storage: storage statuses renamed. Implemented sd card icon.
* Storage: added raw sd-card api.
* Storage settings: work started
* Assets: use new icons approach
* Storage settings: working storage settings
* Storage: completely redesigned api, no longer sticking out FS_Api
* Storage: more simplified api, getting error_id from file is hidden from user, pointer to api is hidden inside file
* Storage: cli info and format commands
* Storage-cli: file list
* Storage: a simpler and more reliable api
* FatFS: slightly lighter and faster config. Also disabled reentrancy and file locking functions. They moved to a storage service.
* Storage-cli: accommodate to the new cli api.
* Storage: filesystem api is separated into internal and common api.
* Cli: added the ability to print the list of free heap blocks
* Storage: uses a list instead of an array to store the StorageFile. Rewrote api calls to use semaphores instead of thread flags.
* Storage settings: added the ability to benchmark the SD card.
* Gui module file select: uses new storage api
* Apps: removed deprecated sd_card_test application
* Args lib: support for enquoted arguments
* Dialogs: a new gui app for simple non-asynchronous apps
* Dialogs: view holder for easy single view work
* File worker: use new storage api
* IButton and lfrrfid apps: save keys to any storage
* Apps: fix ibutton and lfrfid stack, remove sd_card_test.
* SD filesystem: app removed
* File worker: fixed api pointer type
* Subghz: loading assets using the new storage api
* NFC: use the new storage api
* Dialogs: the better api for the message element
* Archive: use new storage api
* Irda: changed assest path, changed app path
* FileWorker: removed unused file_buf_cnt
* Storage: copying and renaming files now works between storages
* Storage cli: read, copy, remove, rename commands
* Archive: removed commented code
* Storage cli: write command
* Applications: add SRV_STORAGE and SRV_DIALOGS
* Internal-storage: removed
* Storage: improved api
* Storage app: changed api pointer from StorageApp to Storage
* Storage: better file_id handling
* Storage: more consistent errors
* Loader: support for NULL icons
* Storage: do nothing with the lfs file or directory if it is not open
* Storage: fix typo
* Storage: minor float usage cleanup, rename some symbols.
* Storage: compact doxygen comments.

Co-authored-by: あく <alleteam@gmail.com>
2021-07-23 15:20:19 +03:00
gornekich
49af516ec7
[FL-1547], [FL-1500] NFC app v1 (#593)
* nfc: remove mifare read debug view and scene
* nfc: change mifare ultralight data structure
* mifare_ultralight: add more commands
* nfc: add emulate mifare ul scene
* nfc: rework data structures, remove debug scenes and views
* nfc: add read emv scenes
* nfc: mifare emulation wip
* nfc cli: increase detecting time
* nfc: save nfc files with new format
* nfc: store Mifare Ultralight
* nfc: start loading mifare ultralight
* nfc: add delete scenes
* nfc: add edit UID and name
* nfc: finish parsing uid and mifare ul data
* nfc: delete success fix
* gui_widget: introduce GuiWidget
* gui_widget: add string element
* gui_widget: add button element
* gui_widget: move free elements into gui_widget
* nfc: rework info scene with GuiWidget
* nfc: rework device info scene
* nfc: rework delete scene gui
* nfc: add compatible script support
* nfc: rework emv reading scenes
* nfc: rework bank card save
* nfc: add bank card custom view
* gui_widget: add icon element
* nfc: add icon to bank card
* nfc: start worker after switching view

Co-authored-by: あく <alleteam@gmail.com>
2021-07-22 09:05:07 +03:00
Albert Kharisov
769ab2aef2
[FL-1489] IRDA: move to FileWorker (#594)
* [FL-1489] IRDA: move to FileWorker, fixes

* Use FileWorker
* Use file_select to select remotes
* Fix some crashes
* Add RAW parsing restrictions
* Remove excess scene (LearnDoneAfter)
* Move all file system logic to standalone object
2021-07-22 03:07:00 +03:00
あく
f25d000d53
[FL-1558] Technical Debt: console, bootloader, targets, stdglue, etc... (#590)
* ApiHal: console abstraction, change uart baud rate to 230400. Bootloader: drop F5. Furi: prevent thread local output to serial console in stdglue.
* ApiHal: take control over system initialization, reorder some subsystems in a hope of fixing USB issues.
* Main: cleanup dead code. ISR: take care of HSECSS by our self. USB: leave clock configuration alone.
* F6 cube: switch RCC to LL.
* Cli: rollback return behavior.
2021-07-20 20:14:42 +03:00
its your bedtime
0dc4081b85
[FL-1493] text input: fix "up" key behaviour #591 2021-07-20 04:56:51 +03:00
あく
3a88386aae
Cli: rename stack free size to stack watermark (#589) 2021-07-19 04:07:50 +03:00
あく
66bd59b3cd
Cli: give input command CliCommandFlagParallelSafe flag (#588)
* Cli: give input command CliCommandFlagParallelSafe flag
2021-07-19 03:16:15 +03:00
あく
b6f6378628
Cli: insomnia safe flags and better insomnia handling in cli (#587) 2021-07-18 22:08:26 +03:00
あく
ddfdbc0530
[FL-1530] Cli: better Сtrl-С polling (#586) 2021-07-18 21:52:04 +03:00
あく
421a0f6b97
[FL-1546, FL-1534, FL-1550] Drop F5, Certification preparation, Global application start lock (#585)
* Firmware: drop F5 target
* Rename app-loader to loader
* Update code owners file
* Loader: global application start lock API, minor refactoring
* Archive: update loader usage
* Cli: Command flags, global application start lock
* Apps: update cli API usage
* Bootloader: minor refactoring
* Firmware: minor build refactoring
* SubGhz: GUI packet test
* SubGhz: drop packet transmission and unused presets
* Github: drop F5 from build
* Archive: favorites
* Archive: a little bit more of Favorites
2021-07-18 21:09:00 +03:00
あく
fbb81483ae
[FL-1555] Cli: update motd (#584)
* Cli: update motd
* Cli: autocomplete and cursor.
* Cli: one line history.
* Cli: minor cleanup, remove double flush, remove prompt on empty autocomplete
2021-07-17 17:14:34 +03:00
Albert Kharisov
30ae16c2e1
[FL-1470] Support archive for IRDA (#582)
Co-authored-by: あく <alleteam@gmail.com>
2021-07-16 19:50:18 +03:00
Albert Kharisov
13c5a8cb20
[FL-1505] Add RAW format (#576)
* Add RAW format
* F5 stubs for build to pass
* Fix saving decoded signal error
* Irda: set ISR before starting timer, remove explicit NVIC configuration

Co-authored-by: あく <alleteam@gmail.com>
2021-07-16 19:43:54 +03:00
gornekich
a837bc5d00
[FL-1537] NFC launch from archive (#580)
* archive: pass full file path as App argument
* nfc: add starting emulation from Archive
* nfc, ibutton: rework setting key name with path lib
* archive: revert launching app with full file path

Co-authored-by: あく <alleteam@gmail.com>
2021-07-16 00:39:21 +03:00
あく
851a44dc59
[FL-1528] SubGhz: dma send (#579)
* Gui: input injection in screen stream
* Cli: expose ASCII table in public header
* SubGhz: dma output draft
* SubGhz: output initialization cleanup
* SubGhz: update dma send routine, add subghz_tx cli command.
* SubGhz: proper register address for DMA
* SubGhz: proper, fully working dma+tim2 configuration
* SubGhz: transmit PT with cli.
* Drivers: fix invalid size in CC1101 PA_TABLE loading routine.
* Interrupts: configurable DMA isrs.
* F5: backport fixes.
* SubGhz: free buffer after use
* SubGhz: use sleep instead of reset at the end
* SubGhz: async tx repeat with circular DMA
* SubGhz: disable dma channel on complete, adjust PT send timings
* SubGhz: backport function singature change to F5
* SubGhz: add tx debug gpio
2021-07-15 16:54:11 +03:00
SG
e31999b116
[FL-1371] Lfrfid app: add manufacturers to "Add manually" scene (#577)
* Lfrfid app: add manufacturers to "Add manually" scene
* Lfrfid app: fix submenu name size
2021-07-13 12:06:54 +03:00
gornekich
3571b58d0a
[FL-1448], [FL-1529] Introducing Scene Manager, NFC App refactoring and bug fixes (#575)
* gui: refactore ViewNavigator -> SceneManager
* view_dispatcher: remove scene controller, add custom and navigation cb
* scene_manager: rework scene controller, move AppScene from lib
* nfc: rework nfc scenes with new scene controller API
* view_dispatcher: crash on free if not all views were freed
* nfc: introduce scene declaration
* scene_manager: allocate and configure application scenes
* nfc: rework nfc with new Scene Manager API
* scene_manager: remove dublicated scene handlers allocation
* nfc: rework nfc app with new scene manager API
* view_dispatcher: add tick event
* scene_manager: add tick event type and handler
* nfc: rework notifications with tick event
* scene_manager: remove scene id from scene structure
* scene_manager: rename array -> stack, add documentation
* api-hal-nfc: remove listen activation processing
* nfc_scene_start: shorter submenu call
* nfc: fix nfc file name
* nfc: fix Retry in mifare ul success read
* nfc_cli: fix read timeout in nfc_detect CLI command

Co-authored-by: あく <alleteam@gmail.com>
2021-07-12 21:56:14 +03:00
あく
c3fda0c8c3
[FL-1491] Gui: input injection in screen stream (#573)
* Gui: input injection in screen stream
* Cli: expose ASCII table in public header
2021-07-09 05:16:54 +03:00
gornekich
20fe544b4f
[FL-1501] NFC: read Mifare Ultralight (#571)
* nfc: add scripts menu scene
* canvas: add glyph width api
* app_scene: add state to Scene template
* gui: introduce TextBox view
* nfc: add mifare ultralight read scenes
* nfc: add mifare ultralight menu scene
* nfc: fix scene functions declaration
* Gui: use size_t for sizes.

Co-authored-by: あく <alleteam@gmail.com>
2021-07-08 23:41:34 +03:00
Albert Kharisov
9f6e14d005
[FL-1398] IRDA: Implement timings encoder, add RC-6 (#570)
* Add RC-6 protocol
* Implement timings Encoder
* Remove Unit-tests from build
2021-07-08 21:20:13 +03:00
Skorpionm
4ce41a3e6f
Skorp subghz capture refactoring (#569)
* SubGhz: changing the operation of the capture timer, and the logic of the work of parsers
* Add toolbox lib. Move levels to toolbox. Subghz switch to levels.
* Subghz: update worker signatures
* SubGhz: pluggable level duration implementations.
* SubGhz : test drawing pictures in Gui
* SubGhz: Added a callback with the parser structure as argument
* SubGhz: copy protocol data to model
* SubGhz: refactoing code
* SubGhz: cleanup and format sources
* SubGhz: remove comments

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-07-07 22:49:45 +03:00
あく
a7283280ef
GUI: Icons and IconsAnimation refactoring. Switch assets to new Icon Api (#566)
* GUI: Icons and IconsAnimation refactoring. Switch assets to new Icon API.
* Gui: icon and animation draw now do not accept null pointer
* Format Sources
* Fix no debug build
* Furi: stricter checks in memmgr
2021-07-07 11:57:49 +03:00
あく
607e873404
BLE: fix incorrect RSSI calculation. Firmware: don't mark system as tainted on test releases. (#567)
* BLE: correct RSSI calculation routine.
* Firmware: only guard boot on production releases.
* BLE: proper float formatting in cli
* BLE: faster RSSI refresh
2021-07-07 00:23:59 +03:00
SG
54114553c1
[FL-1517] Maximum heap block stat for os_info cli cmd. (#564)
* Memmgr: heap_get_max_free_block function. Add "Maximum heap block" to os_info cmd.
* Cli: split os_info into ps and free commands

Co-authored-by: あく <alleteam@gmail.com>
2021-07-05 16:01:02 +03:00
SG
f153a745eb
[FL-1320] Fix archive memleak (#565)
* iButton: fix timer initialization
* Archive: fix strings memleak
* Archive: optimize string handling
* Archive: fix strings non-memleak
2021-07-05 15:34:58 +03:00
SG
29da0e360c
[FL-1329] Settings (#563)
* Menu: secondary menu rendering
* Manu: reset window position on enter to new menu
* App-loader: settings menu
* Applications: add settings app list
* App backlight-control: all work related to turning off the display is now in the notification app
* App notification: settings save and load
* Gui: variable item list module
* App: new notification settings app
* Display: backlight is now fully serviced in the notification app
* Gui: update variable item list module documentation
2021-07-05 01:03:56 +03:00
SG
7734fb4018
[FL-1371][FL-1502] Lfrfid app: fixes. (#555)
* Gui module byte-input: changed api
* Gui: changed font height in multiline text according to guideline
* Apps lrfid, nfc: changed send and receive icon
* App lfrfid: fix text, fix scene switсh
* Elements: multiline text framed, fix paddings
* Gui: remove duplicate definition of elements_multiline_text_framed
* App NFC: update byte_input callback signature
* App subghz: fix text lines in capture scene
* App subghz: position of the text is aligned with the guidelines and other scenes
* App subghz: removed mockup

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-07-04 19:01:16 +03:00
あく
f82a4a2260
Cli: add timestamp to device_info command (#562) 2021-07-02 19:03:23 +03:00
あく
721f83dd83
[FL-1516] Fix name read on device without OTP (#561)
* Fix name read on device without OTP
* Dolphin: proper name handling.
2021-07-02 18:12:05 +03:00
gornekich
602c125ef5
[FL-1499] NFC App: save and load from SD card (#560)
* nfc: add save name and save success scenes
* applications: increase nfc app stack size to 4k
* nfc: move nfc device data to separate file
* nfc: add nfc device save to SD card
* nfc: add file select scene
* nfc: add saved key menu scene
* nfc: add manual SAK, ATQA, UID enter
* nfc: add manual enter
* nfc scenes: remove typedef in SubmenuIndex enu
* nfc_device: close file_worker after load data

Co-authored-by: あく <alleteam@gmail.com>
2021-07-02 16:44:10 +03:00
Skorpionm
88be176fcf
SubGhz: Nice FlooR S improvements, cli stack overflow fix, code documentation, new key data formatting (#559) 2021-07-02 16:25:49 +03:00
Albert Kharisov
df9a6673da
[FL-1513] Fix IRDA crash (#557) 2021-07-02 15:46:13 +03:00
its your bedtime
c388458462
[FL-1281] Unlocked screen fix+ (#556)
* Dolphin app: fix "Unlocked" popup  timeout on menu enter

* FL-1404: fix word wrap index
2021-07-02 14:30:30 +03:00
あく
5d14dce013
[FL-1464] Cli: merge version and hwinfo into device_info (#553)
* Cli: merge version and hwinfo and form machine/human readable key value set.
* Backport F6 changes to F5. Add readme to cli_command_device_info rountine
* Cli: return proper order to radio stack version in device_info command

Co-authored-by: SG <who.just.the.doctor@gmail.com>
2021-07-02 03:58:31 +03:00
あく
d088c28659
Power: rename reset to reboot (#552) 2021-07-02 01:53:20 +03:00
its your bedtime
c27d76d664
[FL-1510] Archive: OK fix (#551) 2021-07-01 19:35:57 +03:00
SG
b09f68c43d
Removed app floopper-bloopper and font FontGlyph (#549)
* Remove app floopper-bloopper and FontGlyph
* Gui: proper viewport allocator declaration

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-07-01 14:33:43 +03:00
あく
8211432685
Clang formatter: add indent to wrapped functions names. (#548) 2021-07-01 03:45:20 +03:00
gornekich
a0e1e42f2d
[FL-1479] New NFC app (#544)
* view: add custom event callback
* nfc: rework nfc worker
* gui: introduce view navigator
* nfc_scences: introduce nfc scenes
* nfc: add start scene
* lib: add C application scene template
* nfc: move nfc views to separate directory
* view_dispatcher: add support for view_navigator
* nfc views: rework nfc views
* nfc scenes: add nfc application scenes
* nfc: rework nfc main thread
* view_dispatcher: add separate event for search back scene
* nfc: set worker result address at worker start
* nfc: update read nfc scenes
* view_navigator: rework with M-LIB container
* view_dispatcher: check that all views were freed
* nfc: add debug menu with all functions
* nfc read scene: add notification on success
* api-hal-nfc: add API for UID emulation
* nfc: add nfc emulation UID scene
* assets: add NFC assets
* nfc: update read and emulate scenes UI
* nfc: fix memory leak
* rfal: set custom analog configuration
2021-06-30 20:43:29 +03:00
SG
7a13391b2b
[FL-1371] New LF-RFID app. Second encounter. (#547)
* File worker: file operations helper.
* Notification app: removed yield
* File worker: write operations, calls to system file widgets
* App ibutton: use file worker
* Lfrfid: generic key loading, add path helper and hex conversion to lib
* FileWorker: plain C verison
* FileWorker: add to lib.mk
* FileWorker: add to C sources, instead of CPP
* Lfrfid: save scene
* App lfrfid: add key scene, saved key menu
* App lfrfid: saved key info scene
* App lfrfid: delete key scene
2021-06-30 15:02:46 +03:00
あく
e8211226f3
[FL-1496] SubGhz: Library, Cli, Application (#543)
* ApiHal: set frequency and path in one go. Drivers: proper frequency registers calculation for CC1101. Update subghz cli to match new api.
* SubGhz: preparation for parsers porting, tim2 sharing
* ApiHal: add interrupts API, move all TIM2 related things there.
* SubGhz: refactor protocol lib and add keeloq.
* SubGhz: proper init_set for keeloq manafacture key
* SubGhz: port more protocols to lib
* SubGhz: load keeloq manufacture keys from sd card (if any).
* SubGhz: format output from protocols.
* SubGhz: use default frequency in subghz_rx cli command.
* SubGhz: keeloq key types
* Fix compillation error when internal storage disabled
* SubGhz: minor cleanup
* SubGhz: properly handle timeout and reset signal in subghz_rx
* SubGhz: Worker, Capture View. Furi: emulate thread join.
* SubGhz: free strings on keeloq key load end
* SubGhz: update protocols reporting API, app refactoring and capture view, update API HAL usage.
* SubGhz: update dump formatting
* ApiHal: backport subghz preset to F5
* ApiHal: backport subghz frequency range to F5
2021-06-30 00:19:20 +03:00
SG
dce3665f63
File worker helper. Slightly optimized iButton app code size. (#545)
* File worker: file operations helper
* Notification app: removed yield
* File worker: write operations, calls to system file widgets
* App ibutton: use file worker
* App ibutton: small save fix, forgotten byte
2021-06-29 16:08:45 +03:00
SG
22e1ecb642
New LF-RFID app (#534)
* Hal lfrfid: add read timer pulse and period config fns
* New debug application for lfrfid subsystem
* New lfrfid: app, fix naming
* App lfrfid: assets
* Container view module
* App ibutton: remove unused header
* App lfrfid scenes
* App notification, add yield to blocking operations, add speaker volume control
* App lfrfid: reading key scene
* Assets: placeholder icon
* App lfrfid: reworked container view module
* App lfrfid: new scenes
* App lfrfid: write scene
* App lfrfid: write hid
* App lfrfid: emulate scene
* App lfrfid: save name scene
* App lfrfid: add missing file
2021-06-28 17:42:30 +03:00
its your bedtime
9d23602968
[FL-1477] Archive improvements (#541)
* various small issues fixes
* proper fadding to favourites
* cleanups
* fix infrared extension
* allow subdirs in app tabs
* fix elements_scrollbar args
* bugfixes, looping list, halfbaked pinning
* pinning
* ui updates

Co-authored-by: あく <alleteam@gmail.com>
2021-06-25 19:57:42 +03:00
Albert Kharisov
c583cce5bd
[FL-1401] Add Universal TV remote (#539)
* Remove excess headers
* Add ButtonPanel
* Add Popup
* Move FileReader to standalone object
* Universal remote (part 1)
* Universal remote (part 2)
* Global rename tranciever/file_parser
* Compile assets
* syntax fix
* English: rename tranceiver to transceiver.

Co-authored-by: あく <alleteam@gmail.com>
2021-06-25 16:52:27 +03:00
Albert Kharisov
5e08674663
[FL-1437] Replace stringstream with sscanf (#540)
Do this to save space. Stringstream is very heavy.
2021-06-25 15:25:03 +03:00
Albert Kharisov
158c859bdc
[FL-1486] Fix leaks and leak-sanitizer (#538)
* [FL-1486] Fix leaks and leak-sanitizer
* Move free_heap to AppLoaderState
* App-loader: better heap logging.

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-06-24 16:16:03 +03:00
gornekich
8cc0a9a998
[FL-1475] iButton emulate shortcat (#535)
* ibutton: run emulation when launched with argument
* app-loader: set NULL context when starting application from menu
* ibutton: change p to argc
* ibutton: fix load key data from file
* ibutton: fix memory leak
2021-06-24 14:32:33 +03:00
gornekich
5b8f147882
[FL-1447] NFC application refactoring (#532)
* nfc: add separate nfc_detect
* nfc_worker: add callback and context
* api-hal-nfc: return busy if rfal worker is running
* nfc: introduce nfc_detect, change nfc_worker API, rework main nfc task
* nfc_emulate: introduce nfc_emulate module
* nfc: introduce nfc_emv module
* nfc: introduce nfc_mifare_ul module
* nfc: remove unused nfc_views
* nfc: separate messages and models
* nfc: remove unused nfc message types
* nfc: remove message_queue from common api
* view_dispatcher: delete internal queue in destructor
* api-hal-nfc: fix rfal worker initialization condition

Co-authored-by: あく <alleteam@gmail.com>
2021-06-24 11:46:37 +03:00
あく
4cf000f270
[FL-1465] Archive application bug fixes. Gui: update TextInput API. (#530)
* Update MLib to latest master.
* Archive: update string_t usage, add unsafe usage TODO, change model type to blocking and fix invalid usage.
* Gui: update text_input API and it's usage.
* fix blocking model issues
* fix  unsafe string_t usage

Co-authored-by: Igor Baranov <bedtimeposts@gmail.com>
Co-authored-by: its your bedtime <23366927+itsyourbedtime@users.noreply.github.com>
2021-06-24 00:46:52 +03:00
あく
ed75bc2c39
[FL-1483] Cli: add time set feature to time command (#536)
* Cli: add time set feature to time command
* Cli: better time set function feedback
2021-06-23 23:06:57 +03:00
あく
961d61807c
[FL-1478] Fix setting PA0 high confirmation dialog #533 2021-06-23 19:41:05 +03:00
あく
8116bfcbab
[FL-1443, FL-1289] Move assets compilation to separate Makefile. Add scripts folder. Add OTP flashing with DFU. (#531)
* Assets: move assets compilation to separate Makefile. Move all scripts to scripts folder. Add scripts ReadMe. Add precompiled assets.
* Split assets.py into separate entities. Option bytes for FL-1289 and checker/setter.
* Cli: explicitly initialize variable befor use in api_hal_vcp_rx_with_timeout
* Rename ob_check script to ob.
2021-06-23 17:58:44 +03:00
あく
359bbdfe69
[FL-1326] Move heap4 allocator to furi core and add allocation tracing capability (#529)
* Move heap memory allocator to furi core
* Newlibc: add malloc guards
* Furi: add cmsis thread id getter
* Core: add tracing capability to heap allocator. Add heap tracing support to furi thread. Add heap trace support to app-loader.
2021-06-23 17:48:44 +03:00
its your bedtime
6ec9c6cc49
[FL-1404] iButton long names fix (#528)
* ibutton: long names partial fix\
* ibutton: limit max filename length to 22 chars
* elwrapping long names to a new line
* Proper m-string size usage

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-06-22 12:56:57 +03:00
gornekich
8605f53c28
view_dispatcher: add custom events (#526)
Co-authored-by: あく <alleteam@gmail.com>
2021-06-20 11:15:48 +03:00
Albert Kharisov
c54653223e
[FL-1413] Fix boot/fw version mix #524 2021-06-18 14:08:13 +03:00
SG
2084f83eb5
App iButton: fix cli delete command bug, use RAII records (#523)
Co-authored-by: あく <alleteam@gmail.com>
2021-06-18 11:04:53 +03:00
SG
89dd1ff925
[FL-1419] new iButton cli (#521)
* iButton, helpers: add destructor
* iButton app: new approach to cli commands, cli read
* iButton app: cli write
* iButton app: cli emulate
* iButton app: remove old cli commands
* iButton app: use unique_ptr for worker
* iButton app: remove obsolete cli help
* iButton app: fix help and key type parsing
2021-06-17 14:13:37 +03:00
gornekich
9943c93189
[FL-1442] Fix nfc emulation (#520)
* api-hal-nfc: rework nfc detection
* nfc: increase nfc detection timeout
* api-hal-nfc: add 2 emulation parameters for mifare and emv
* nfc: choose emulation parameters
2021-06-16 17:45:35 +03:00
あく
9e69164b1b
[FL-1441] ApiHalVcp: use DTR signal for ready flag. Fix memory leak in subghz. (#519)
* ApiHalVcp: use DTR signal for ready flag. Fix memory leak in subghz.
* Backport VCP fix to F5
2021-06-16 09:14:59 +03:00
gornekich
a0fdc559c9
[FL-662] Read Mifare Ultralight (#518)
* nfc: add read mifare ultralight to menu
* emv_decoder: add pragma once
* nfc: add mifare ultralight reader
* nfc: add mifare ultralight read draw
* nfc: add mifare ultralight type checker
* nfc: rework menu callback
* mifare ultralight: change type names

Co-authored-by: あく <alleteam@gmail.com>
2021-06-15 17:54:09 +03:00
SG
0b14db4fb3
C++ apps: templated scene controller (#517)
* C++ apps: templated scene controller
* templated app: fix type names
* templated app: text store component
* Applications: add "Templated Scene" application
* templated app: refractoring
* Gui module byte input: fix docs
* templated app: new byte input scene
* templated app: dialog ex view module
* templated app: popup view module
* templated app: dialog-ex view module, fix docs
* templated app: text input view module
* Gui module text input: fix docs
* Furi: duplicated include
* templated app: record holder (controller) class
* templated app: view modules can now be accessed via cast
* templated app: remove unused includes
* templated app: fix return code
2021-06-15 14:01:56 +03:00
gornekich
3a2121bbb8
[FL-1424] NFC emulate CLI command (#514)
* nfc: move cli commands to separate file
* nfc: add nfc_emulate CLI command
* nfc: rework nfc emulate call from gui
* nfc: deactivate nfc state machine when exiting worker

Co-authored-by: あく <alleteam@gmail.com>
2021-06-10 15:01:48 +03:00
SG
4ad5245969
[FL-1063} LF-RFID Cli (#515)
* App lfrfid: update emulator to process external data.
* App lfrfid: cleanup emulator
* App lfrfid: cli interface
* Lib: arguments parser lib

Co-authored-by: あく <alleteam@gmail.com>
2021-06-10 14:53:59 +03:00
Albert Kharisov
6c74ea65c2
[FL-1369, FL-1397, FL-1420] IRDA + SDcard (#513)
* Add saving to SD-Card (not ready yet)
* Add saving to SD-card (done)
* Select previous menu item
* Fix central button
* Fix current_button
* Refactoring
* Add notifications
* [FL-1417] Add IRDA CLI
  CLI commands:
  1) ir_rx
  Receives all IR-trafic, decodes and prints result to stdout
  2) ir_tx <protocol> <address> <command>
  Transmits IR-signal. Address and command are hex-formatted
* Fix BUG with random memory corruption at random time in random place in random universe in random unknown space and time forever amen
* Fix submenu set_selected_item
* Bring protocol order back
* Add TODO sdcard check
2021-06-09 16:04:49 +03:00
gornekich
498ffe8d2c
Subghz packet test (#512)
* subghz: add cli support for packet tx rx

* api-hal-subghz: add comments

* subghz_cli: fix typo

Co-authored-by: あく <alleteam@gmail.com>
2021-06-08 12:51:16 +03:00
its your bedtime
216f8b4fb8
archive: file extension removed in rename menu (#511)
Co-authored-by: SG <who.just.the.doctor@gmail.com>
2021-06-07 19:47:27 +03:00
its your bedtime
22ffd6204b
menu: drop left/right keys navigation (#510)
Co-authored-by: SG <who.just.the.doctor@gmail.com>
2021-06-07 18:55:31 +03:00
its your bedtime
3c6f236df3
prevent "enter/save" key callback if string is empty (#509)
Co-authored-by: SG <who.just.the.doctor@gmail.com>
2021-06-07 18:49:56 +03:00
its your bedtime
f817d45d27
[FL-1288] Additional gpio_set pins for testing (#508)
* uart rx, speaker and ir rx/tx pins added to cli_command_gpio_set

* gpio_set: Warning for PA0, cli: added motd by @maratsafi
2021-06-07 18:33:47 +03:00
Albert Kharisov
31c31db479
[FL-1250, FL-1252, FL-1323, FL-1324] New IRDA Application (part 1) (#497)
* Add new IrdaApp (half ready), add ButtonMenu

* Fix NEC's extension

* clang-format

* Fix leak

* Add submenu optional header

* IRDA: add Edit button

* clang-format

* IrdaApp: Fix scene flow

* Add IRDA NEC extended protocol

* IRDA: Add address/command length

Co-authored-by: SG <who.just.the.doctor@gmail.com>
2021-06-02 18:16:05 +03:00
gornekich
d040515f84
[FL-1363] BLE GUI tests (#505)
* bt: introduce bt CLI commands

* api-hal-bt: add get rssi

* bt: fix cli commands

* bt: fix typos

* bt: refacrote bt test names

* ble gui continue

* bt: rework carrier test gui

* bt: rework send packets test gui

* bt: rework receive packets test

* api-hal-bt: change rssi return

* bt: refactore bt gui

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
Co-authored-by: SG <who.just.the.doctor@gmail.com>
2021-06-02 17:09:02 +03:00
Lesha Lomalkin
8851a240ab
fixed line end in cli:hw_info command (#503)
* fixed line end in cli:hw_info command

* remove x0a from ctime() out

* syntax fix

* use reentrant verison of ctime

Co-authored-by: DrZlo13 <who.just.the.doctor@gmail.com>
2021-06-02 15:56:28 +03:00
its your bedtime
d5df0483a3
[FL-1234] Keyboards redesign (#501)
* text input: keyboard redesign,; input: tune repeat keypress timing; archive: fix max string width when scrollbar is shown

* byte input: redesign

* byte/text input: long press back to activate backspace added

* archive: pass absolute path to app

* format sources

* better keyboard timings

Co-authored-by: SG <who.just.the.doctor@gmail.com>
2021-06-02 15:51:05 +03:00
its your bedtime
7f16c9fe5a
[FL-1388] Passport portraits (#506)
* new passport pics, 3 stages with 3 moods each
* removed magic const
2021-06-02 14:47:05 +03:00
gornekich
205932b24c
Add BLE CLI tests (#502)
* bt: introduce bt CLI commands
* api-hal-bt: add get rssi
* bt: fix cli commands
* bt: fix typos
* Bt: add missing newline in console message

Co-authored-by: Aleksandr Kutuzov <alleteam@gmail.com>
2021-05-29 01:57:11 +03:00
Albert Kharisov
5a993b6d2a
[FL-1345] IRDA monitor (#504)
* Irda Monitor: fix
2021-05-28 17:12:39 +03:00
SG
2b89ca50fa
Blink app: add delay to prevent notifications stuck (#499)
Co-authored-by: あく <alleteam@gmail.com>
2021-05-28 12:45:54 +03:00
SG
7e6a97c3a3
[FL-1307] iButton key files: ASCII encoding and .ibtn extension (#493)
* GUI module submenu: fix documentation
* GUI module submenu: add submenu_set_selected_item fn
* App iButton: use submenu_set_selected_item to store and set selected item in submenu
* App iButton: swap write and emulate in "saved key menu" scene
* App iButton: file select can now switch to the previous selected file
* App iButton: swap write and emulate indexes in "saved key menu" scene
* Gui module file_select: work with separate extension
* iButton app: separate file managment, file error handling
* SD card api: custom error message
* iButton app: better file error handling

Co-authored-by: あく <alleteam@gmail.com>
2021-05-26 19:50:16 +03:00
gornekich
63e9207c44
[FL-1308] Add API for starting applications with arguments (#486)
* app-loader: add API for starting applications with arguments
* app-loader: add check if application is running
* archive: rework starting app with app-loader API

Co-authored-by: あく <alleteam@gmail.com>
2021-05-26 19:23:25 +03:00
its your bedtime
1cfb16d9a7
[FL-1235] Cut long names (#494)
* fix typo, elements_string_fit_width added
* add string_fit_witdt to fileselect module

Co-authored-by: あく <alleteam@gmail.com>
2021-05-26 19:01:59 +03:00
its your bedtime
502f449904
[FL-1357] CLI: SD Format confirmation #495
Co-authored-by: あく <alleteam@gmail.com>
2021-05-26 18:48:28 +03:00
gornekich
e620b310b7
[FL-1039] Emv emulation (#491)
* nfc: add emulate emv to submenu
* api-hal-nfc: add emv emulation
2021-05-26 02:54:44 +03:00
SG
fc5c48edef
[FL-1300] iButton app: save selected menu item and selected file position. (#489)
* GUI module submenu: fix documentation
* GUI module submenu: add submenu_set_selected_item fn
* App iButton: use submenu_set_selected_item to store and set selected item in submenu
* App iButton: swap write and emulate in "saved key menu" scene
* App iButton: file select can now switch to the previous selected file
* App iButton: swap write and emulate indexes in "saved key menu" scene

Co-authored-by: あく <alleteam@gmail.com>
2021-05-25 14:04:22 +03:00
あく
84f46e670a
[FL-1254] ViewDispatcher improvements, SubGhz cli and certification preparation (#482)
* Add more more frequencees and change ok key bahavior to toggle
* GUI: add queue support to ViewDispatcher
* SubGhz: basic cli
* SubGHz: pt send cli
* SubGhz: carrier cli commands.
* Fix irda test data merge artifacts
2021-05-25 13:19:07 +03:00
SG
1a1c5fa05d
Unit tests: fix IRDA test data (#488)
* Unit tests: fix IRDA test data
* Fix format-errors on test data files
* Fix sticking red/green light on unit-tests

Co-authored-by: あく <alleteam@gmail.com>
Co-authored-by: Albert Kharisov <albert@flipperdevices.com>
2021-05-25 12:43:14 +03:00
SG
19644f6af5
Notifications: add sound to error sequence (#487) 2021-05-25 00:43:44 +03:00